محصولات (46,000+)

ICL7116CJL - 3.5-Digit LCD Display ADC | Maxim Integrated
ICL7116CJL

ICL7116CJL - 3.5-Digit LCD Display ADC | Maxim Integrated

The Maxim Integrated ICL7116CJL is a 3.5-digit dual-slope analog-to-digital converter with an integrated liquid-crystal display driver, supplied in a 40-pin ceramic dual in-line package. It is designed for digital-panel measurement systems that require conversion, display hold control, and direct LCD segment drive in one through-hole component. The package is a 40-CDIP, and the device is associated with the commercial temperature grade. A dual-slope analog-to-digit converter is a sigma-delta-style measurement architecture that integrates an unknown input voltage over a fixed interval and then measures the time required for a reference ramp to balance the result. In the ICL7116, this measurement method supports a stable digit-oriented output intended for panel meters, laboratory instruments, counters, and other display-oriented measurement equipment. The ICL7116CJL combines a 3.5-digit A/D conversion function with a display driver and display hold capability. Integrating these functions reduces the number of separate devices required in a digital instrument. The converter output can be used with the associated segment-driver circuitry to present a measured value directly on an LCD panel, making the device especially relevant to compact, panel-mounted meter designs. This IC belongs to the ADC/DAC category within integrated circuits and implements the broader hierarchy of data-acquisition IC, display interface, and display-driver functions. Its dual-slope architecture, 3.5-digit measurement format, and dedicated display-driver outputs distinguish it from general-purpose flash, SAR, and high-resolution pipeline ADC families. The 40-pin CDIP construction also favors leaded industrial and laboratory assemblies rather than compact surface-mount production. Typical uses include digital panel meters, handheld test instruments, counters, laboratory measurement equipment, process-monitoring displays, and educational measurement products. The integrated display function is particularly useful when a numeric result must be read directly rather than converted to another bus format or processed by a separate display controller. When laying out a new board, preserve the pin arrangement and bypass requirements of the ICL7116 family reference circuit rather than treating the LCD outputs as ordinary general-purpose logic. Confirm LCD segment characteristics, reference-source stability, input range, and timing against the manufacturer datasheet before releasing production artwork, especially where the ceramic package is exposed to temperature extremes or mechanical vibration. This product page consolidates the confirmed ICL7116CJL identity, package information, lifecycle considerations, technical alternatives, application guidance, and design notes into one engineering reference. It also distinguishes verified drop-in options from alternatives that require pinout, electrical, or package validation before substitution.

RFQ تماس
ICL7116CMH - 3.5-Digit ADC with Display Hold | Analog Devices
ICL7116CMH

ICL7116CMH - 3.5-Digit ADC with Display Hold | Analog Devices

The Analog Devices ICL7116CMH is a monolithic 3.5-digit analog-to-digital converter with a display hold function, production status, and integrated support for seven-segment display systems. The converter is designed for panel-meter and digital-instrument applications in which a measured value must be converted, decoded, and displayed while retaining a readable hold state. An ADC is an interface IC that converts an analog voltage into a digital numerical representation. The ICL7116 belongs to the family of low-power BCD and seven-segment display converters, combining an analog-to-digital conversion stage with seven-segment decoders, display drivers, an internal reference, and a clock. This integration reduces the component count and simplifies the design of digital voltmeters, temperature meters, process monitors, laboratory instruments, and compact industrial measurement panels. The ICL7116 family provides a hold pin that can freeze or retain the current reading. This feature is useful when an operator must inspect a value that changes continuously, when a measurement must remain stable while another control action occurs, or when the displayed result needs to be copied before the input changes again. Unlike a generic numeric ADC, the device is optimized to drive multiplexed seven-segment displays directly. The converter uses a 3.5-digit measurement format, allowing a display range that includes a sign position and full-scale digit. Its integrated reference, clock, decoders, and drivers place the signal chain and display interface in one package. The manufacturer describes the ICL7116 as a 3.5-digit ADC with display hold, distinguishing it from related converters through the added hold capability. Typical applications include digital panel meters, laboratory readouts, temperature-monitoring instruments, process-control displays, bench power meters, and compact consumer or industrial measurement equipment. In each case, the analog sensor output is conditioned into the converter input range, converted to a digital value, and presented on one or more seven-segment displays. Design considerations center on input signal conditioning, reference stability, display drive requirements, and correct handling of the hold input. The analog input must remain within the device's specified operating limits, while component tolerances around the measurement path can affect displayed accuracy. The manufacturer datasheet should be used to confirm the exact package pinout, pin functions, supply limits, timing, and recommended application circuit before PCB release. This product page combines the confirmed ICL7116 family features with practical selection guidance, complete pinout caveats, sourcing paths, and a qualification-focused comparison framework. It is intended to help engineers determine whether the ICL7116's integrated display architecture and hold function fit a measurement instrument before committing the board layout.

RFQ تماس
ICL7116CPL+ - 3.5-Digit LCD ADC with Display Hold | Analog Devices
ICL7116CPL+

ICL7116CPL+ - 3.5-Digit LCD ADC with Display Hold | Analog Devices

Analog Devices ICL7116CPL+ is a 3.5-digit monolithic integrating analog-to-digital converter with display hold, direct LCD output, and a 40-pin PDIP package. The device provides very high input impedance, supports differential and single-ended 0 V input operation, and uses a dual-slope conversion technique that automatically rejects interference common in industrial environments. An integrating ADC converts an unknown analog voltage into a time-based digital result. In the ICL7116 family, the dual-slope architecture supports high input impedance, good rejection of periodic interference, and direct multiplexing of LCD segment outputs. The display-hold feature distinguishes the ICL7116 from related ICL7106 devices by allowing a measurement to be frozen while the display remains visible. The principal functional characteristics visible in the verified product data are 3.5-digit resolution, direct LCD display drive, display hold, very high input impedance, differential and single-ended operation, and a 0 V input reference. These characteristics make the converter appropriate for panel meters, laboratory instruments, process monitoring, and industrial measurement systems where an operator must view a stable numerical reading. The ICL7116 uses a dual-slope measurement technique rather than a successive-approximation architecture. Dual-slope integration averages the input over a controlled interval, helping reject periodic interference and reducing sensitivity to short-duration disturbances. The Hold pin can freeze the displayed result, while the integrated display-driver outputs reduce the need for separate digital-to-analog conversion or display multiplexing hardware. Typical uses include digital panel meters, temperature-controller front panels, laboratory counters, process-monitoring equipment, weighing systems, and portable instruments. A design using the ICL7116CPL+ should preserve its high-impedance analog input path, provide the external components and display arrangement required by the manufacturer datasheet, and account for the stated 0°C to 70°C operating-temperature range. The principal design trade-off is integration time versus measurement responsiveness. Integrating conversion improves rejection of interference but does not provide the rapid sampling of a high-speed successive-approximation converter. The Hold function is valuable when intermittent readings need to remain visible for observation or copying without changing the underlying converter architecture. This page combines verified manufacturer and distributor information with practical selection guidance, commercial pricing references, package details, and a clear explanation of the ICL7116CPL+ display-hold function. It also distinguishes verified replacements from merely similar converter functions so engineers can avoid assuming that an LCD driver, LED driver, or different conversion architecture is pin-to-pin compatible.

RFQ تماس
ICL7116CQH+D - 3.5-Digit LCD ADC | Analog Devices
ICL7116CQH+D

ICL7116CQH+D - 3.5-Digit LCD ADC | Analog Devices

Analog Devices ICL7116CQH+D is a 3.5-digit monolithic integrating analog-to-digital converter with direct LCD display drive, a 9 V supply rating, and a 44-pin PLCC package measuring approximately 16.59 mm by 16.59 mm. The converter uses a dual-slope conversion architecture and provides a hold input that can freeze the current reading for stable display or downstream processing. An integrating analog-to-digital converter converts an analog input into a digital measurement by integrating the input over a defined interval and measuring the resulting time or counter value. The ICL7116 belongs to the ADC and DAC category of display-oriented mixed-signal semiconductors. It combines a high-input-impedance measurement front end with display decoding, segment drivers, a voltage reference, and clock circuitry in one monolithic device. The ICL7116CQH+D provides a 3.5-digit measurement range with approximately 0.0015% maximum linearity error. It directly drives LCD displays rather than LED displays, eliminating a separate external display-driver stage in suitable meter designs. Its hold function distinguishes it from the related ICL7106 and adds useful control when a measurement must remain displayed or captured during a subsequent system action. The device uses a dual-slope conversion method and includes onboard active components for polarity and digit drive, segment decoding, voltage reference, and clock operation. Its high input impedance is suited to sensors and measurement networks that cannot tolerate heavy loading. Because conversion speed depends on the selected integration cycle and oscillator arrangement, the application should use the timing and component-selection guidance in the manufacturer datasheet rather than treating the converter as a high-speed successive-approximation ADC. Typical uses include handheld meters, laboratory instruments, panel meters, temperature displays, laboratory equipment, and industrial measurement panels. The direct LCD output and integrated conversion functions simplify a complete measurement instrument, while the hold input supports user-controlled sampling and display retention. A successful design must provide the external reference, oscillator, input, display, and decoupling components required by the selected circuit topology. The PLCC package also requires careful PCB footprint alignment and adequate thermal dissipation because the converter can dissipate power as the supply-to-reference difference increases. This page combines device specifications, package details, application guidance, replacement considerations, and a practical comparison of compatible family members. It is designed to help engineers evaluate the ICL7116CQH+D for a new panel-meter design or determine whether a related Maxim integrated converter can satisfy the required LCD, hold, package, and supply constraints.

RFQ تماس
ICL7117CMH 3½-Digit ADC | Maxim Integrated | 44-Terminal QFP
ICL7117CMH

ICL7117CMH 3½-Digit ADC | Maxim Integrated | 44-Terminal QFP

The Maxim Integrated ICL7117CMH is a three-and-a-half-digit ADC with display hold, offered in a 44-terminal gull-wing QFP package. The verified product information identifies the device as an integrated circuit for data acquisition and ADC/DAC applications. Its package is specified as square, with 44 terminals, a 0.8 mm terminal pitch, and package dimensions of 10.0075 mm width and length. The ICL7117CMH designation is associated with Maxim Integrated products documented as ICL7117CMH and ICL7117CMH+ listings. An ADC is an analog-to-digital converter, a semiconductor that converts an analog input voltage into a digital representation. The ICL7117CMH belongs to the broader data-conversion and signal-processing hierarchy, where precision measurement systems commonly combine an analog input, a conversion engine, digital control or processing, and a display or communications interface. The display-hold function is intended to preserve a measured value so it can be viewed or transferred before the next conversion sequence changes the displayed result. The package information is the most concrete differentiator for PCB design. A 44-terminal gull-wing QFP provides external connections for power, analog input, digital output, reference, control, and display-related functions, subject to the exact pin assignment in the manufacturer datasheet. Its 0.8 mm terminal pitch allows a compact square surface-mount footprint, while the 10.0075 mm package dimensions require PCB land patterns and courtyard planning based on the manufacturer drawing. The QFP format also provides mechanical lead support and is generally more convenient for automated board assembly than a fine-pitch leadless package. ICL7117CMH is appropriate for panel meters, laboratory instruments, industrial monitoring equipment, digital weighing systems, process measurement, and other applications requiring a dedicated display-oriented ADC. In these systems, the converter accepts a conditioned analog signal, performs conversion, and presents a stable numerical result. The external circuitry normally defines the input range, reference voltage, integration timing, and display interface behavior. Designers should follow the Maxim ICL7117CMH datasheet for pinout, electrical limits, recommended input and reference networks, timing, and decoupling. Because the verified information does not state the complete electrical ratings, verify the converter resolution, input voltage range, reference arrangement, operating temperature range, supply requirements, and timing values against the manufacturer document before releasing a PCB or production design. This product page combines the verified package and product identity information with practical integration guidance, application mapping, and comparison context. It is intended to help engineers locate the correct ICL7117CMH documentation, understand the package implications, and plan a PCB or replacement review without treating general ADC characteristics as guaranteed ICL7117CMH specifications.

RFQ تماس
ICL7117CMH+D - 3.5-Digit Dual-Slope ADC | Analog Devices
ICL7117CMH+D

ICL7117CMH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

Analog Devices ICL7117CMH+D is a 3.5-digit dual-slope analog-to-digital converter with display hold, supplied in a 44-pin gull-wing MQFP package measuring 10 mm by 10 mm. The converter is classified as a commercial-temperature component and is intended for precision measurement systems that convert an analog input into a digital value suitable for processing or display. An ADC is an analog-to-digital converter, a semiconductor that samples an analog voltage and represents it as a digital code. The ICL7117 belongs to the dual-slope integrating ADC family, which uses integration and de-integration periods to average input-dependent noise and reject unwanted periodic interference. Within the broader hierarchy, it is a data-acquisition IC, an interface device between sensors or measurement circuits and digital control or display electronics. The ICL7117CMH+D provides a 3.5-digit conversion result and includes display-hold functionality. Its 44-pin surface-mount package supports the analog inputs, reference connections, timing components, digital interface, and display-related functions required by a complete measurement instrument. The commercial temperature grade suits controlled industrial, laboratory, and instrumentation environments where extended-temperature qualification is not required. Its dual-slope architecture is particularly useful when the target signal is relatively slow and the environment contains mains-frequency or other periodic interference. Integrating both signal and reference over controlled intervals can improve rejection of fixed-frequency noise while supporting a straightforward external reference and timing network. The exact conversion time, input bandwidth, linearity, and reference requirements must be taken from the manufacturer datasheet for the final front-end design. Typical implementations include digital panel meters, laboratory instruments, temperature measurement systems, process-monitoring equipment, weighing instruments, and embedded measurement panels. The display-hold feature allows a reading to remain on the display while a new measurement is acquired, which is useful when operators need to inspect stable values between updates. PCB implementation should preserve clean analog signal paths and separate the analog input and reference nodes from digital switching activity. Use a short, shielded route for the measured input, maintain a stable reference arrangement, and place timing and filter components close to the device pins. Component values and grounding topology should follow the manufacturer’s reference circuit to avoid degrading conversion accuracy or noise rejection. This page combines the manufacturer-classified converter architecture, package and temperature-grade attributes, practical application guidance, related MPNs, and a structured comparison of verified drop-in variants. It is intended to help engineers locate the datasheet, understand the 44-pin footprint, assess replacement options, and plan an instrument-grade measurement board.

RFQ تماس
ICL7117CPL+ - 3.5-Digit Dual-Slope ADC | Maxim Integrated
ICL7117CPL+

ICL7117CPL+ - 3.5-Digit Dual-Slope ADC | Maxim Integrated

The Maxim Integrated ICL7117CPL+ is a 3.5-digit, low-power, dual-slope analog-to-digital converter with integrated display drivers, a reference, a clock, and a display Hold function. The device is packaged in a 40-pin PDIP and directly drives an instrument-size LED display. Its integrating architecture and very high input impedance suit precision measurement systems that need stable digital readings from relatively high source impedance. An integrating ADC such as the ICL7117CPL+ converts an analog input voltage into a digital result through repeated integration and reference measurement. This dual-slope method is well suited to meters and panel instruments because it provides high input impedance, rejects periodic interference, and can use simple passive input networks. The ICL7117 family adds a Hold pin to the ICL7106 and ICL7107 function, allowing a measured value to remain displayed for examination or transfer to another system. The ICL7117CPL+ integrates a 3.5-digit A/D converter, seven-segment LED display drivers, an internal reference, and a clock. Those functions reduce the number of external components required for a standalone display instrument. The Hold function is particularly useful when an operator must freeze a reading during calibration, inspection, or process monitoring without interrupting the ongoing measurement. The dual-slope conversion method supports rejection of interference at the conversion frequency. Its high input impedance also reduces loading of the sensing circuit, which is important when the input originates from bridges, thermocouples, or other relatively high-impedance sources. The exact conversion timing, input limits, resolution detail, reference voltage, and operating-temperature limits must be selected from the manufacturer data sheet when defining a production design. Typical uses include digital panel meters, laboratory instrumentation, process monitoring, temperature measurement, laboratory scales, and general-purpose industrial measurement panels. The integrated LED drivers make the ICL7117CPL+ particularly appropriate for displays built from conventional seven-segment LED digits rather than multiplexed glass LCDs. An ICL7116CPL+ is the corresponding LCD-oriented family member, while the ICL7117CPL+ supports LED display systems. Designers should preserve the recommended input and reference network, bypass placement, and display-driver layout described by Maxim Integrated. Because this is a through-hole PDIP device in a 40-pin package, PCB allocation must reserve the full footprint and adequate insertion clearance. Power, ground, reference, analog input, timing, and display-driver connections should be assigned directly from the package pin-description table and datasheet application example. This page combines the device architecture, display-function selection, practical layout guidance, package information, and same-footprint replacement analysis. It is intended to help engineers determine whether the ICL7117CPL+ provides the required LED display drive and Hold behavior without adding a separate ADC, display driver, clock, and reference to a measurement instrument.

RFQ تماس
ICL7117CQH - 3.5-Digit Dual-Slope ADC | Maxim Integrated
ICL7117CQH

ICL7117CQH - 3.5-Digit Dual-Slope ADC | Maxim Integrated

Maxim Integrated ICL7117CQH is a 3.5-digit monolithic dual-slope analog-to-digital converter with a parallel word output, built-in reference, bipolar input, and low-noise front end. It operates from a 6 V to 9 V supply in the commercial 0 °C to 70 °C temperature grade and is packaged in a 44-pin PLCC (QCCJ) surface-mount package. The converter is designed to directly drive seven-segment LED displays while providing a held digital measurement when the Hold function is asserted. An integrating analog-to-digital converter converts an unknown input voltage into elapsed time by charging and discharging an internal integration network. The ICL7117 belongs to the integrating ADC, dual-slope ADC, and precision measurement converter hierarchy. Unlike a successive-approximation ADC, a dual-slope converter rejects a substantial amount of periodic noise and is commonly used with panel meters, laboratory instruments, scales, and industrial measurement equipment. Principal characteristics include 3.5-digit measurement resolution, a reported 16-bit conversion word, single-channel operation, parallel word access, an integrated reference source, and support for bipolar input signals. The ICL7117 differs from the ICL7116 because it includes a Hold input and directly supports LED displays, whereas the ICL7116 is intended for LCD displays. This distinction makes pin and function compatibility with the ICL7116 unsuitable despite their shared converter heritage. The internal architecture combines a precision reference, comparator, integrator, timing section, digital counter, and display-driver outputs. Dual-slope conversion repeatedly measures input and reference intervals, producing a result that is effectively proportional to the ratio between the input voltage and the reference voltage. The reported 16-bit parallel output permits a host processor to capture the converted value without reproducing the internal counter timing, while the Hold input can freeze the displayed result during measurement or interface transactions. Typical uses include digital panel meters, laboratory measurement instruments, process-monitoring equipment, weighing systems, and embedded instrumentation with discrete LED displays. The 6 V to 9 V supply range suits systems that already provide a 9 V rail, while the commercial temperature grade targets indoor laboratory, industrial, and commercial equipment operating between 0 °C and 70 °C. Designers should pay particular attention to input polarity, reference accuracy, integration timing, display-driver compatibility, and the distinction between the Hold and Digit inputs. Confirm the complete QCCJ pin assignment and board footprint against the manufacturer data sheet before routing a replacement PCB or connecting LED segments. This product record combines the manufacturer's converter description with package, temperature, interface, and lifecycle information, then adds practical selection guidance and a package-focused comparison for engineers evaluating replacements without requiring a PCB change.

RFQ تماس
ICL7126CPL+ - 3.5-Digit Dual-Slope ADC | Analog Devices
ICL7126CPL+

ICL7126CPL+ - 3.5-Digit Dual-Slope ADC | Analog Devices

The Analog Devices ICL7126CPL+ is a low-power 3.5-digit dual-slope analog-to-digital converter with a 3 conversions-per-second conversion rate, integrated seven-segment decoders and display drivers, a voltage reference, and a clock circuit in a 40-pin PDIP package. The converter combines a complete measurement signal chain on one CMOS IC and directly supports a non-multiplexed LCD display. An integrating ADC such as the ICL7126 converts an analog input into a time-proportional digital result by repeatedly integrating the input and measuring the interval required to return to zero. Within the broader semiconductor hierarchy, the ICL7126 is a dual-slope ADC, which is an ADC, which is a data-conversion IC within integrated circuits. This makes it suitable for compact panel-meter and laboratory instrumentation designs where the display driver functions are useful. The principal verified features include 3.5-digit measurement resolution, a 3-SPS conversion rate, low power operation, a 40-pin PDIP package, and integrated segment decoders and drivers. The integrated voltage reference and clock reduce the number of external support circuits needed for a basic digital panel meter. The device also contains the active components required to implement a complete measurement system rather than operating only as a numeric converter. The ICL7126 uses a dual-slope conversion method, integrating both the unknown input and a known reference during successive measurement intervals. Its architecture is intended for high-input-impedance measurement systems. According to the Analog Devices product page, the monolithic converter directly drives a non-multiplexed LCD, while the Renesas datasheet identifies the ICL7126 as a plug-in replacement for the ICL7106 when only passive components are changed. Typical uses include digital panel meters, laboratory meters, process monitoring equipment, temperature and pressure instrumentation, and other low-rate measurement systems with a three-digit display. The integrated display drivers are especially useful when the measured quantity must be presented locally without requiring a separate display controller, microprocessor, or complex display multiplexer. The principal design consideration is that the analog front end, reference network, timing components, and LCD interface must be evaluated together rather than as independent blocks. Grounding, input filtering, reference stability, LCD contrast, and conversion timing determine whether the complete meter achieves useful accuracy. Designers should follow the manufacturer application guidance and verify the exact electrical limits against the current datasheet before finalizing component values. This product page consolidates verified manufacturer information, distributor availability, package details, replacement guidance, and engineering-oriented application guidance. It also distinguishes the verified ICL7126 family information from replacement candidates whose individual electrical ratings still require engineering confirmation against the latest manufacturer datasheets.

RFQ تماس
ICL7126CQH - 3.5-Digit LCD A/D Converter | Analog Devices
ICL7126CQH

ICL7126CQH - 3.5-Digit LCD A/D Converter | Analog Devices

Analog Devices ICL7126CQH is a low-power, 3.5-digit successive-approximation A/D converter designed for direct interface with liquid-crystal displays. The device provides seven-segment display decoding and display-driver functions in a 44-lead J-lead ceramic LCC package. It combines an A/D converter, internal reference, clock, seven-segment decoders, display drivers, and associated control functions on one CMOS integrated circuit. The ICL7126CQH belongs to the ADC/DAC category of signal-conversion semiconductors. An A/D converter, also called an analog-to-digital converter, transforms a continuously varying analog voltage into a numeric code suitable for measurement, display, control, or data acquisition. A 3.5-digit converter can resolve approximately 1999 principal counts and is commonly used for panel meters, laboratory instruments, industrial readouts, and portable measurement systems where more resolution than a simple three-digit display provides is useful. The manufacturer describes the ICL7126 family as a low-power device intended to drive liquid-crystal displays directly. Its integrated seven-segment decoders reduce the external logic required between the conversion result and the LCD. Direct LCD drive simplifies instrument construction by limiting the main external circuitry to the input network, timing components, display connections, and normal bypass or protection components described in the manufacturer data sheet. The ICL7126CQH is specified in the 44-LCC J-lead package and appears on the manufacturer's product page as a production product. Analog Devices also recommends the ICL7136 for new designs, which is an important lifecycle consideration when selecting between continued use of an established converter and migration to a newer family member. The exact electrical limits, conversion timing, input impedance, reference characteristics, display-drive specifications, and environmental ratings should be taken from the ICL7126 manufacturer data sheet before release of a production circuit. Common uses include digital panel meters, digital multimeters, laboratory measurement instruments, temperature controllers, process-monitoring displays, weighing systems, and portable data-acquisition equipment. The integrated display path is particularly useful where designers want a numeric readout without adding a separate display decoder or driver IC. When designing around the ICL7126CQH, begin with the manufacturer pin-description table and application information rather than assigning signals by function alone. Confirm the LCD glass segment mapping, input-source range, reference arrangement, timing components, and bypass requirements directly against the data sheet. Also evaluate the suggested ICL7136 before committing to a long-lived design if the project is newly started. This page organizes the verified package, display, resolution, interface, lifecycle, and sourcing details into an engineering-focused format. It also separates confirmed attributes from parameters that require direct comparison against the manufacturer data sheet, helping designers assess fit before committing the 44-LCC footprint to a PCB layout.

RFQ تماس
ICL7126IPL+ - 3.5-Digit CMOS ADC | Maxim Integrated
ICL7126IPL+

ICL7126IPL+ - 3.5-Digit CMOS ADC | Maxim Integrated

The Maxim Integrated ICL7126IPL+ is a low-power, 3.5-digit successive-approximation A/D converter with an integrated voltage reference and clock, supplied in a 40-pin PDIP package. The converter is designed for low-power measurement systems and uses a differential input architecture with a resolution of 0.05 percent. The ICL7126IPL+ is the commercial-temperature, through-hole version of the ICL7126 family, with an operating range of 0°C to 70°C. An ADC is an interface component that converts an analog voltage into a numeric value for measurement, control, or display. The ICL7126 integrates the active circuitry required for a complete 3.5-digit measurement channel on one CMOS IC. Unlike discrete meter designs, its integrated reference, clock, and conversion system reduce component count while retaining direct measurement of slowly changing voltages. Key features include a true differential input and reference arrangement, a guaranteed zero reading for a zero-volt input, and true polarity at zero for precise null detection. The converter also provides approximately 1 pA typical input current. Its 3.5-digit architecture supports instrumentation displays and panel-meter applications where four digits of resolution are useful while a sign indicator improves readability around the zero point. The CMOS implementation emphasizes low operating power, making the device suitable for portable instruments and battery-operated measurement panels. Integration of the reference and clock simplifies board design by reducing the number of external timing and calibration components. Differential measurement can also reject common-mode voltage when the source and reference paths are arranged carefully, although real-world accuracy still depends on input filtering, reference quality, grounding, and analog-layout discipline. Typical uses include digital panel meters, laboratory measurement instruments, temperature and process monitoring, portable test equipment, and low-power sensor interfaces. The 40-pin PDIP package favors through-hole assembly, repairable prototypes, and larger industrial control boards where a surface-mount footprint would offer little practical benefit. Designers should verify the complete electrical limits and recommended operating circuit in the manufacturer datasheet before release. Pay particular attention to input and reference polarity, conversion timing, bypass-capacitor placement, and the relationship between source impedance and accuracy. A stable, low-noise reference path and short analog traces are essential for repeatable measurements. This product page combines the manufacturer product information with package-specific identification, application guidance, verified sourcing information, and drop-in replacement analysis. It also highlights the practical advantages and limitations of the 40-pin PDIP format for engineers deciding whether the ICL7126IPL+ fits an existing measurement-instrument design.

RFQ تماس
ICL7129ACPL+ - 4.5-Digit Low-Noise LCD ADC | Maxim Integrated
ICL7129ACPL+

ICL7129ACPL+ - 4.5-Digit Low-Noise LCD ADC | Maxim Integrated

The Maxim Integrated ICL7129ACPL+ is a low-noise, 4.5-digit, single-chip analog-to-digital converter with multiplexed LCD drivers, supplied in a 40-pin PDIP package. It is designed for precision digital voltmeter, digital panel meter, laboratory instrument, process-control, and weighing-system applications. The device uses successive-integration conversion, provides high-impedance differential inputs, supports true ratiometric operation, and includes automatic polarity detection. Its integrated multiplexed LCD drivers reduce the number of external display-interface components, while the 4.5-digit resolution supports measurements up to 19,999 counts according to the manufacturer product information. The converter is intended for systems where a stable reference voltage and suitable input conditioning determine the final measurement accuracy. ICL7129ACPL+ is listed as a production product by Maxim Integrated, and the manufacturer describes it as a low-noise 4 1/2-digit ADC with multiplexed LCD drivers. The package provides through-hole DIP construction for straightforward prototyping and repair, although it is larger than modern surface-mount ADC packages. Engineers should pay attention to the reference voltage, input common-mode range, integration period, LCD segment drive requirements, and the external components used for noise filtering when designing a new instrument. The ICL7129ACPL+ is particularly useful when a legacy panel-meter architecture needs a proven display-driver and ADC combination without changing the mechanical format of the board.

RFQ تماس
ICL7129CPL - 4.5-Digit LCD ADC | Intersil | 40-Pin PDIP
ICL7129CPL

ICL7129CPL - 4.5-Digit LCD ADC | Intersil | 40-Pin PDIP

Intersil Corporation ICL7129CPL is a 4.5-digit single-chip analog-to-digital converter that directly drives a multiplexed liquid-crystal display. The device combines successive-integration conversion, a precision reference input, and LCD segment-driver circuitry in a 40-pin PDIP package. It is intended for high-resolution measurement instruments where a stable digital reading and direct LCD presentation are required without a separate display driver. An LCD analog-to-digital converter is a specialized mixed-signal component that converts an analog input voltage into a numeric code and presents that code on a multiplexed LCD. The ICL7129 belongs to the broader ADC hierarchy while specializing in direct LCD instrumentation. Compared with general-purpose ADC systems, this integrated approach reduces the number of external components and simplifies the relationship between the conversion engine, digit and segment outputs, and the display. The ICL7129CPL provides 4.5-digit measurement resolution and uses the ICL7129 family's successive-integration conversion technique. The associated ICL7129A documentation identifies approximately ±20,000-count resolution, which supports fine readings in handheld meters and laboratory instruments. Direct LCD drive, CMOS construction, and a 40-pin dual in-line package make the device suitable for conventional through-hole instrument designs. Technical operation centers on the integrated successive-conversion loop, reference voltage, input stage, and display multiplexing. Only passive components and an external reference are needed for normal operation. Because the LCD outputs belong to the same package as the converter, segment-drive timing, reference stability, input filtering, and grounding directly influence displayed accuracy. The converter must also be matched to the selected LCD segment count and operating scheme. Typical uses include handheld digital multimeters, laboratory panel meters, industrial process indicators, temperature instruments, weighing displays, and general-purpose measurement panels. The device is particularly appropriate when a dedicated LCD and a 4.5-digit presentation are central to the product. It can also serve in legacy or repair applications where preserving the established 40-pin PDIP footprint and LCD interface is more important than adopting a newer display architecture. Designers should follow the manufacturer's pin-description and typical-application diagrams when assigning the reference, analog input, conversion-control signals, and LCD outputs. Keep the analog input and reference paths away from LCD drive traces and switching nodes, and place filtering or protection components close to their corresponding pins. Confirm LCD compatibility, reference voltage, timing, and grounding before releasing a new PCB. This product summary combines the ICL7129CPL identification, package information, converter architecture, display use cases, and drop-in family options into an engineering-focused reference. It also highlights the component-selection checks that matter when replacing a 4.5-digit LCD measurement front end without changing the existing through-hole board layout.

RFQ تماس
ICL7135CAI+ - 4.5-Digit Dual-Slope ADC | Analog Devices
ICL7135CAI+

ICL7135CAI+ - 4.5-Digit Dual-Slope ADC | Analog Devices

The Analog Devices ICL7135CAI+ is a high-precision, monolithic 4.5-digit dual-slope analog-to-digital converter with a 2.0000 V full-scale capability and accuracy specified to ±1 count in 20,000. It accepts high-impedance differential inputs and provides multiplexed BCD outputs for driving a display in the 28-SSOP package. The converter combines reliable dual-slope conversion with a 0.5-count resolution increment. A dual-slope ADC is an integrating analog-to-digital converter that measures input voltage by comparing a controlled integration period with a reference-driven de-integration period. This technique belongs to the wider ADC, data-converter, and semiconductor hierarchies. It is especially useful when low-frequency measurements require good noise rejection and predictable behavior with slow-changing sensor signals. The ICL7135CAI+ provides a 4.5-digit measurement range, a 2.0000 V full-scale capability, and ±1 count in 20,000 accuracy. Its high-impedance differential input structure supports source impedances that would otherwise degrade simple resistive divider measurements. Multiplexed BCD outputs reduce the number of connections required when driving a seven-segment display, while the 28-SSOP format supports compact panel-meter and laboratory-instrument layouts. The manufacturer describes the ICL7135 as a monolithic converter designed around a dual-slope conversion architecture. Differential input handling is central to its measurement behavior because it permits a sensor signal to be measured relative to a return or reference node. The 4.5-digit result format supports a maximum reading of 19,999 counts, while the stated ±1-count-in-20,000 accuracy establishes the conversion-error target for the product family. Typical uses include digital panel meters, temperature measurement instruments, laboratory readouts, process monitoring, portable meters, and industrial measurement equipment. The device is particularly appropriate when a regulated reference, controlled input excitation, and a dedicated display interface are available. It is less suitable for high-speed waveform acquisition, communications, or applications requiring many conversions per second. For implementation, follow the manufacturer pin-description and application tables when assigning the reference, integrator, input, clock, and display signals. Stable reference and input components are central to repeatable dual-slope measurements, while correct grounding and protection are necessary when external sensors connect to the measurement terminals. This product record combines the official ICL7135 product information with distributor package, ordering, and availability details. It also distinguishes the closely related ICL7135CAI- temperature-grade variant from the ICL7135CMH-D, which uses a different 44-pin package, so engineers can assess replacement options without treating package-incompatible parts as drop-in substitutes.

RFQ تماس
ICL7135CMH+D - 4.5-Digit Dual-Slope ADC | Analog Devices
ICL7135CMH+D

ICL7135CMH+D - 4.5-Digit Dual-Slope ADC | Analog Devices

The Analog Devices ICL7135CMH+D is a high-precision, monolithic 4.5-digit dual-slope analog-to-digital converter with multiplexed BCD output and differential high-impedance inputs. It provides ±1 count accuracy in 20,000 counts, a 2.0000 V full-scale range, auto-zero, auto-polarity, and true ratiometric operation. The device is packaged in a surface-mount 44-pin MQFP package. A dual-slope ADC is an integrating data-conversion technique that converts an unknown input voltage into a time interval and a digital count. It belongs to the ADC and data-converter hierarchy, where the ICL7135 is designed for high-resolution measurement rather than high-speed waveform capture. Its differential input architecture helps reject common-mode noise, while ratiometric operation allows the reference and source voltage to vary together when the measured quantity is proportional to the reference. The ICL7135CMH+D includes multiplexed BCD outputs for driving seven-segment displays, allowing a compact instrument design without requiring a separate display interface. The stated ±1-in-20,000-count accuracy is useful for panel meters, laboratory instruments, process monitoring, and precision instrumentation. Auto-zero and auto-polarity features reduce calibration effort and support bipolar measurement without changing the basic converter topology. The 2.0000 V full-scale capability gives the converter a defined input range when the reference is configured appropriately. Because the converter uses a dual-slope conversion process, conversion timing is relatively slow compared with a successive-approximation ADC, making the part more appropriate for continuously updated measurements than for rapid transient sampling. External clock, reference, input, and display-support components determine the complete measurement accuracy and operating behavior of the circuit. Typical applications include digital panel meters, temperature controllers, laboratory measurement instruments, weighing systems, process transmitters, and general-purpose industrial monitoring equipment. The 44-MQFP surface-mount package supports compact instruments and automated assembly. Designers should pay attention to reference stability, input filtering, clock timing, layout cleanliness, and the required BCD display interface when building a production circuit. This page combines the converter’s manufacturer specifications, package information, replacement considerations, and application guidance to support component selection and board-level design. Use the manufacturer datasheet for the complete pin-description table, timing diagrams, electrical limits, and recommended external-circuit values.

RFQ تماس
ICL7135CN 4.5-Digit Precision ADC | Texas Instruments
ICL7135CN

ICL7135CN 4.5-Digit Precision ADC | Texas Instruments

The Texas Instruments ICL7135CN is a 4.5-digit precision dual-slope analog-to-digital converter with one differential input, 0.003 kSPS conversion rate, multiplexed BCD output, and a 2.0000 V full-scale capability in a 28-pin through-hole DIP package. The supplied distributor data identifies it as a display-driver ADC with ±1 count in 20,000 accuracy and high-impedance differential inputs. What is a dual-slope ADC? A dual-slope ADC integrates an unknown input for a fixed interval and then measures the time required for a reference to return the integrator toward zero. This method is well suited to precision measurement because it rejects periodic noise, averages short disturbances, and can provide high effective resolution with relatively simple analog circuitry. ICL7135CN belongs to the analog-to-digital converter, data-converter, and signal-measurement semiconductor hierarchy. Key features include 4.5-digit BCD-oriented measurement resolution, 2.0000 V full scale, multiplexed BCD output, true differential input, precision zero reading for a 0 V input, and precision null detection with true polarity at zero. The converter is intended for instrumentation applications where repeatable readings and direct display-driver compatibility matter more than high conversion throughput. Its dual-slope architecture favors noise rejection over sampling speed. The ICL7135CN integrates a successive approximation and dual-slope conversion approach according to the verified product descriptions. The external reference and input arrangement must be selected to match the intended measurement range, while the display interface is organized for multiplexed BCD output. Because the supplied search results identify a 28-pin DIP package, the physical design should use the appropriate through-hole footprint and pin assignments shown in the manufacturer documentation. Typical applications include digital panel meters, laboratory instruments, weighing systems, temperature measurement bridges, industrial process monitors, and precision test equipment. These systems benefit from the 4.5-digit readout, differential input capability, and ability to present decimal-aligned BCD results directly to display-driver circuitry. The relatively low conversion rate is suitable for continuously updated measurements rather than waveform acquisition or high-speed data logging. Designers should pay particular attention to reference stability, input impedance, integrator components, timing accuracy, bypass capacitors, and display-drive timing. Use the manufacturer datasheet for the complete electrical limits and pinout, and verify the zero-input and null-detection behavior during calibration. This page combines verified distributor descriptions with engineering guidance while avoiding unverified electrical values that are not present in the supplied data.

RFQ تماس
ICL7135CPI+ 4.5-Digit BCD ADC | Maxim Integrated
ICL7135CPI+

ICL7135CPI+ 4.5-Digit BCD ADC | Maxim Integrated

The Maxim Integrated ICL7135CPI+ is a 4.5-digit, BCD-output analog-to-digital converter with multiplexed display outputs in a 28-pin plastic DIP package. It combines dual-slope conversion reliability with an accuracy of ±1 count in 20,000 and a full-scale range of 2.0000 V. The differential input architecture supports measurement systems requiring high input impedance and rejection of common-mode interference. A dual-slope integrating ADC is a signal-conditioning and conversion category that averages an unknown voltage over a fixed integration interval and compares the result with a reference. Within the broader hierarchy, the ICL7135CPI+ is an analog-to-digital converter, an integrated data-conversion circuit, and a semiconductor intended for precision measurement and display instrumentation. Dual-slope conversion is especially useful when resistance, temperature, or slow-changing sensor signals are converted into stable numerical readings. The principal feature set includes 4.5-digit resolution, multiplexed binary-coded decimal outputs for four digit-drive positions, and high-impedance differential inputs. The ±1-count-in-20,000 accuracy specification provides a useful figure for panel meters and digital voltmeters. Its 2.0000 V full-scale capability lets the designer define the measurable range with an external reference. The multiplexed BCD architecture reduces the number of dedicated output signals required to drive a visual display. Technically, the converter separates its analog and digital functions. The analog section develops an integrated representation of the differential input, while the digital section contains counters, timing control, input interfaces, output interfaces, and the logic that coordinates each measurement cycle. This integrating approach favors noise rejection and repeatable readings when the input changes slowly, although conversion time is longer than with a high-speed successive-approximation ADC. Typical uses include digital panel meters, digital voltmeters, laboratory instruments, temperature-measurement panels, process-monitoring displays, and weighing equipment. The ICL7135CPI+ is especially appropriate when a readable decimal display, differential input, and deterministic integration cycle are more important than high conversion throughput. The BCD outputs are intended to interface naturally with digit drivers and display-oriented instrument designs. Designers should verify reference accuracy, input-common-mode range, integration-cycle timing, digit-driver polarity, and display multiplexing against the manufacturer datasheet before layout release. Because this is a through-hole 28-pin DIP device, its physical package differs from surface-mount display ADC families and should not be treated as a board-level equivalent. The manufacturer datasheet remains the controlling source for pin names, timing, and electrical limits. This page consolidates the verified distributor price, package information, function description, available drop-in candidates, comparison parameters, and practical design cautions. That engineering-focused context helps buyers distinguish a genuine 28-pin replacement from a merely similar 4.5-digit converter and supports faster qualification without replacing the manufacturer datasheet as the authoritative design reference.

RFQ تماس
ICL7135CPI-2 - 4.5-Digit BCD A/D Converter | Maxim
ICL7135CPI-2

ICL7135CPI-2 - 4.5-Digit BCD A/D Converter | Maxim

Maxim Integrated ICL7135CPI-2 is a high-precision 4.5-digit monolithic analog-to-digital converter with multiplexed BCD outputs, differential inputs, and a 2.0000 V full-scale range in a 28-pin PDIP package. It uses a dual-slope conversion architecture with automatic zeroing, automatic polarity, and ratiometric operation, making it suitable for precision measurement systems and digital display instruments. A BCD A/D converter converts an analog input voltage into a binary-coded decimal value intended for direct display decoding. The ICL7135 belongs to the dual-slope ADC family, a converter category valued for predictable accuracy, excellent rejection of periodic noise, and suitability for low-rate panel measurements. Its architecture supports high-impedance differential input measurement while providing separate multiplexed digit outputs for four-digit plus sign displays. Key features include 4.5-digit resolution, ±1 count in 20,000 accuracy, and a 2.0000 V full-scale capability. Differential inputs allow the converter to measure the voltage between two sources rather than only one input referenced to ground. Nearly ideal differential linearity, true ratiometric operation, auto-zero, and auto-polarity reduce calibration requirements and simplify front-end design. The converter combines an analog measurement section with a digital timing and output section. During dual-slope conversion, the converter integrates the unknown input for a fixed interval and then compares the resulting reference charge against a controlled counter. Differential linearity and noise rejection arise from this controlled integration process. Multiplexed BCD outputs reduce the number of package pins required to communicate the measurement to display drivers. Typical applications include laboratory and bench-top meters, digital panel meters, weighing scales, process-monitoring equipment, temperature-measurement instruments, and laboratory power supplies. The high-impedance differential input is particularly useful when the source has limited drive capability or when measurement errors from common-mode voltage must be reduced. When implementing the circuit, place input and reference-network components close to the converter and maintain clean, low-leakage analog routing around the high-impedance inputs. Select stable reference and integration capacitors with suitable dielectric characteristics, and verify the displayed zero and span behavior over the expected temperature range. The 28-pin PDIP footprint favors through-hole instrumentation designs rather than compact surface-mounted products. This product page combines the official ICL7135 family information with a package-aware comparison, practical design guidance, and same-footprint replacement considerations for engineers maintaining legacy precision-meter platforms.

RFQ تماس
ICL7135CPIZ - 4.5-Digit BCD ADC | Renesas Electronics
ICL7135CPIZ

ICL7135CPIZ - 4.5-Digit BCD ADC | Renesas Electronics

The Renesas Electronics ICL7135CPIZ is a precision 4.5-digit analog-to-digital converter with multiplexed binary-coded-decimal output and integrated display drivers, packaged in a 28-pin PDIP. It combines dual-slope conversion reliability with accuracy of ±1 count in 20,000, a 2.0000 V full-scale capability, and high-impedance differential inputs. The converter operates at approximately 2 samples per second for applications requiring stable numeric measurement rather than high-speed waveform acquisition. A dual-slope integrating ADC is a mixed-signal data-conversion device that averages an input over controlled integration periods to suppress constant noise and reject unwanted frequencies. Within the broader hierarchy of analog-to-digital converters, data converters, and semiconductor signal-chain devices, the ICL7135 family is intended for digital-panel meters, digital voltmeters, laboratory instruments, weighing systems, and other equipment that must present a stable decimal result while also driving a multidigit display. The ICL7135CPIZ includes four digit-drive outputs for multiplexed display operation and multiplexed BCD outputs for external decoding or digital processing. Its dual-slope conversion method is suited to slowly changing measurements because it offers good noise rejection without the complexity and switching noise of a high-frequency successive-approximation converter. The 4.5-digit architecture permits a negative 1-digit range for zero and overload indication in many panel-meter implementations. The converter's differential input arrangement supports source impedance balancing and rejection of common-mode signals when the analog front end is designed correctly. With a 2.0000 V full-scale range, the 4.5-digit resolution corresponds to approximately 100 microvolts per count. This relationship makes the device suitable for precision measurement of voltage, resistance derived through a reference divider, temperature through a linearized sensor network, and other slowly varying quantities. Typical uses include laboratory digital voltmeters, industrial panel meters, laboratory balances, process-monitoring instruments, and test equipment with decimal LED or LCD readouts. The integrated digit drivers simplify displays containing multiple digits, while the BCD interface allows the measurement result to be captured by a controller when an instrument also requires remote monitoring or data logging. PCB design should preserve the high-impedance analog input path, provide a clean reference connection, and route display-driver and converter outputs away from sensitive input and reference nodes. Component tolerances, reference stability, input leakage, and grounding determine whether the converter's nominal resolution is realized in the finished instrument. The manufacturer datasheet should be used to assign every physical pin and implement the recommended input, reference, and bypass networks. This page combines the converter's core architecture, package and interface characteristics, engineering guidance, comparison points, and practical application context. It is intended to support design selection and board planning rather than replace the manufacturer datasheet, reference schematic, or final qualification testing.

RFQ تماس
ICL7135CQI+ - 4.5-Digit Differential ADC | Analog Devices
ICL7135CQI+

ICL7135CQI+ - 4.5-Digit Differential ADC | Analog Devices

The Analog Devices ICL7135CQI+ is a 4.5-digit monolithic analog-to-digital converter with differential inputs, multiplexed BCD outputs, and a 28-pin PLCC package. The device combines a 2.0000 V full-scale input capability with accuracy specified as ±1 count in 20,000 and is designed for precision measurement systems requiring direct BCD display output. A dual-slope ADC is a signal-conversion architecture that integrates an unknown input voltage over a defined interval and compares it with a reference-driven ramp. In a broader hierarchy, the ICL7135CQI+ is an ADC, a data-converter IC, and a precision measurement component. Its BCD outputs can reduce the display-processing burden in instruments, while differential input architecture helps reject common-mode disturbances when suitable source and reference arrangements are used. Key characteristics include 4.5-digit resolution, differential analog inputs, multiplexed parallel BCD outputs, and dual output polarity. The Analog Devices product page identifies the ICL7135 as a high-precision monolithic converter with ±1 count in 20,000 accuracy. These attributes make it applicable to laboratory instruments, panel meters, weighing systems, temperature measurement, and other linear analog measurement products. The converter architecture divides each measurement cycle into distinct phases controlled by internal counters, input interfaces, output interfaces, and control logic. Its differential input stage operates with high input impedance, which is useful when measuring slowly changing sensor signals and when the source impedance is not extremely low. The 2.0000 V full-scale reference requirement also places a clear constraint on analog front-end and reference design. Typical applications include digital panel meters, laboratory measurement equipment, process monitoring, resistance and temperature measurement, and other display-oriented instruments. The multiplexed BCD outputs are particularly useful when the measured value must be presented directly through seven-segment display drivers without requiring a complex digital data bus. For PCB implementation, place the input, reference, and bypass connections according to the manufacturer datasheet and keep sensitive analog routing compact. Designers should also verify timing, conversion-cycle behavior, display multiplexing requirements, and output logic levels against the target instrument rather than treating the converter as a generic modern high-speed ADC. This product page organizes the verified technical characteristics, sourcing information, drop-in candidate assessment, application guidance, and design considerations around the ICL7135CQI+. It is intended to help engineers determine whether its dual-slope architecture, BCD interface, differential inputs, and 28-pin PLCC package fit a precision display-oriented measurement design.

RFQ تماس
ICL7135CQI+T 4.5-Digit ADC | Analog Devices | Precision
ICL7135CQI+T

ICL7135CQI+T 4.5-Digit ADC | Analog Devices | Precision

Analog Devices ICL7135CQI+T is a monolithic 4.5-digit dual-slope analog-to-digital converter with multiplexed BCD outputs, high-impedance differential inputs, and a 2.0000 V full-scale capability. The commercial-temperature device is packaged in a 28-pin PLCC and identified by the ICL7135CQI+T tape-and-reel ordering code. According to the Analog Devices product page, its specified accuracy is ±1 count in 20,000, providing a suitable basis for precision panel-meter and digital-indicator measurements. A dual-slope ADC is a sigma-delta-style integrating converter that repeatedly ramps and measures an input against a fixed reference. The ICL7135 divides each conversion into measuring and integrating phases, rejecting much of the periodic noise found in industrial environments. Its integration period helps average unwanted components of the input while retaining the resolution required for a 4.5-digit display. In the system hierarchy, it is an ADC, an analog-to-digital converter, a data-acquisition IC, and ultimately a semiconductor. Key features include 4.5-digit resolution, multiplexed BCD outputs suitable for decimal display drivers, differential high-impedance input architecture, and a specified 2.0000 V full-scale range. The multiplexed output interface reduces the number of dedicated output pins by sharing digit and BCD data lines. This makes the device useful for standalone panel meters and digital instruments that need displayed numerical results rather than a conventional binary-coded output for a digital bus. The ICL7135 separates its analog and digital functions into dedicated circuit areas. The analog section includes the differential input path, integrator, reference comparison, and analog output multiplexing, while the digital section contains counters, timing control, output drivers, and control logic. Its dual-slope architecture supports good noise performance without requiring a high-speed successive-approximation conversion pipeline. Users should nevertheless provide stable reference and input conditions because gain accuracy is tied to reference quality and conversion timing. Typical uses include digital panel meters, laboratory instruments, weighing systems, process-monitoring equipment, temperature controllers, and laboratory-grade measurement panels where a 4.5-digit BCD display is preferred. The differential inputs can measure bipolar or unipolar signals when the external analog network is designed for the selected reference and full-scale range. In each application, the front-end divider, reference source, input filtering, and display interface remain as important as the converter itself. For PCB implementation, place the reference and input-network components close to their associated pins, keep digital BCD routes away from sensitive analog nodes, and provide the bypass and filtering specified by the manufacturer datasheet. Confirm timing, polarity, input-range, and BCD-output details against the ICL7135 datasheet before final routing. Commercial availability, current lot status, and a formal quotation should be confirmed through the Request a Quote form on this page. This product page combines the manufacturer’s converter description with package details, application engineering guidance, and procurement-oriented information. It is designed to help engineers verify the 4.5-digit architecture, BCD display interface, PLCC footprint, reference requirements, and replacement constraints before committing the part to a new instrument design.

RFQ تماس
ICL7136CDL - 3.5-Digit LCD A/D Converter | Analog Devices
ICL7136CDL

ICL7136CDL - 3.5-Digit LCD A/D Converter | Analog Devices

The Analog Devices ICL7136CDL is a low-power 3.5-digit analog-to-digital converter with integrated seven-segment decoders, display drivers, voltage reference, and clock circuitry in a 40-pin CERDIP package. It is designed for direct interface with a liquid-crystal display and supports measurements with very high input impedance, reducing the loading applied to the sensed signal. An integrated A/D converter is a mixed-signal IC that converts an analog input voltage into a digital numeric value. The ICL7136 belongs to the ADC/DAC category, combines data conversion with display-interface functions, and is used where a compact measurement system must present a value directly on an LCD. Unlike a discrete measurement design, it integrates the conversion, reference, clock, decoding, and display-driving blocks into one device. The converter provides 3.5-digit resolution, low-power operation, seven-segment display decoding, LCD segment drivers, a multiplexed LCD backplane output, an internal voltage reference, and an integrated clock. Overrange recovery is an improvement over the earlier ICL7126. The available product listing identifies the ICL7136CDL specifically as a 40-CERDIP device, making it suitable for established through-hole industrial, laboratory, and instrumentation designs. Internally, the device combines successive-approximation conversion techniques with the supporting analog and digital blocks needed for autonomous panel measurement. The integrated reference reduces the number of precision external components, while the high-impedance input helps preserve the accuracy of the signal under test. The segment decoders and LCD drivers reduce display-interface complexity compared with a general-purpose converter followed by a separate display controller. Typical applications include digital panel meters, laboratory measurement instruments, temperature measurement systems, process-monitoring equipment, weighing indicators, and portable diagnostic instruments. In each case, the converter can drive the LCD directly while the external analog front end determines the measured quantity. The LCD architecture also suits handheld or bench instruments where a numerical display is more practical than a host-controlled graphical interface. Designers should verify the complete electrical limits, reference accuracy, conversion timing, input ranges, and display compatibility against the manufacturer datasheet before release. PCB layout must preserve the pinout of the 40-pin CERDIP footprint, provide adequate bypass capacitance, and keep sensitive analog-input routing away from display-driver and clock signals. External component values and timing requirements should not be inferred from generic ADC designs. This page combines verified manufacturer and distributor information, structured specifications, application guidance, sourcing questions, and explicitly recorded data gaps. It does not present unsupported electrical values as facts; unavailable parameters remain clearly identified in the specification table for engineering review.

RFQ تماس
ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices
ICL7136CMH

ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

The Analog Devices ICL7136CMH is a low-power, 3.5-digit dual-slope analog-to-digital converter with automatic calibration, true differential input, and differential reference capability in a 44-pin MQFP package measuring 10 mm by 10 mm. Its primary specifications include a 3.5-digit resolution, 9 V operating supply, and 500 mW power dissipation rating. An ADC is a semiconductor that converts an analog voltage into a numeric value. The ICL7136 belongs to the dual-slope ADC family, a class of converters that integrates an input signal over a fixed interval and measures the resulting integration time against a reference. This technique is well suited to instruments where predictable behavior, rejection of periodic interference, and usable resolution matter more than very high conversion speed. Key features include automatic calibration, true differential input, and a differential reference arrangement. Automatic calibration helps establish a repeatable measurement baseline, while the dual-slope architecture rejects interference signals common in industrial environments. Differential measurements also support ratiometric sensing, where output code depends on the ratio of an unknown input to a related reference. The ICL7136 integrates a 3.5-digit BCD-to-seven-segment display driver, allowing measured values to be presented directly on common digital display devices. This combination of measurement and display excitation simplifies panel-meter, laboratory-instrument, and industrial-control designs by reducing the number of external interface components. Typical uses include digital panel meters, temperature measurement systems, resistive and bridge transducers, laboratory meters, and process-monitoring equipment. The differential input and reference architecture is particularly useful in ratiometric measurements, where sensing-element drift can be reduced when the excitation and measurement paths share corresponding variations. When designing around the ICL7136CMH, preserve the analog and reference layout implied by the manufacturer application guidance, use suitable input and reference filtering, and verify display-drive compatibility with the selected seven-segment display. Because the MQFP-44 package has fine-pitch leads and a thermal pad, assembly and layout planning should account for lead geometry, soldering process, and thermal dissipation. This product page consolidates the confirmed ICL7136 family characteristics, sourcing information, same-package alternatives, and practical selection guidance. It helps engineers compare the commercial-grade ICL7136 variants by package, temperature range, supply voltage, and power rating before committing to a PCB footprint.

RFQ تماس
ICL7136CPL+ - 3.5-Digit LCD A/D Converter | Analog Devices
ICL7136CPL+

ICL7136CPL+ - 3.5-Digit LCD A/D Converter | Analog Devices

Analog Devices ICL7136CPL+ is a low-power, 3.5-digit monolithic analog-to-digital converter with integrated seven-segment decoders, display drivers, voltage reference, and clock circuitry. The device is designed to interface directly with a non-multiplexed liquid-crystal display and includes a 40-pin PDIP package. Its headline specifications are 3.5-digit resolution, differential and single-ended input operation, and low-power conversion in a display-oriented integrated circuit. An integrated 3.5-digit A/D converter combines analog measurement, digital conversion, and display excitation in one package. This type of converter is used where a compact instrument must display a measured voltage, current, resistance, or temperature without requiring a separate display driver. The ICL7136CPL+ uses a dual-slope conversion technique, providing a measurement architecture suited to stable, low-rate instrumentation rather than high-speed signal acquisition. The ICL7136CPL+ includes onboard segment drivers, segment decoders, a voltage reference, and a clock, reducing the number of external display-support components required. The Analog Devices product page identifies it as a production part and describes it as a low-power 3 1/2-digit A/D converter. The integrated display interface is intended for LCD displays, while the converter's differential-input capability supports measurement arrangements that reject common-mode effects when used with suitable input circuitry. The dual-slope conversion method integrates the input over a fixed interval, providing a measurement result that is less sensitive to certain noise and timing variations than a simple instantaneous conversion. The device is intended for panel meters, digital instruments, laboratory measurement equipment, and other systems where a stable numeric display is required. External passive components and the selected input network remain important for achieving the intended accuracy and input impedance. Typical uses include handheld meters, process-monitoring displays, temperature-measurement instruments, laboratory equipment, and embedded display panels. In each case, the ICL7136CPL+ can combine the measurement front end and LCD drive functions while leaving the host system free to focus on control, data logging, or user interaction. Designers should follow the manufacturer pin-description table when assigning PCB nets and should confirm the display polarity, segment count, input configuration, reference arrangement, and bypass requirements against the manufacturer datasheet. The 40-pin PDIP footprint is mechanically straightforward but occupies substantial board area, so DIP availability and assembly method should be checked during product planning. This product page consolidates the ICL7136 family specifications, verified package information, sourcing guidance, comparison parameters, and practical replacement considerations to support faster engineering evaluation and board-level planning.

RFQ تماس