MC33689DDWBR2 vs MC33689DWBR2 مقایسه
مقایسه دقیق کنار به کنار MC33689DDWBR2 توسط NXP Semiconductors و MC33689DWBR2 توسط NXP Semiconductors. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
NXP Semiconductors
MC33689DWBR2 - SPI System Basis Chip with LIN Transceiver | NXP
MC33689DWBR2 ✓ فعالمقایسه مشخصات
| پارامتر | MC33689DDWBR2 | MC33689DWBR2 |
|---|---|---|
| برند | NXP Semiconductors | NXP Semiconductors |
| دسته‌بندی | Motor Drivers | Interface ICs |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | System Basis Chip (SBC) with LIN Transceiver | — |
| رابط | SPI (control) + LIN (bus) | SPI |
| Supply Voltage (Vbat) | 5.5 V to 18 V | — |
| Integrated LDO Output | 5.0 V | — |
| LDO Output Current | 50 mA | — |
| LIN Specification | LIN 2.0 / 2.1 compliant | — |
| بسته‌بندی / کیس | 32-SOIC (0.295", 7.50 mm width) | — |
| نوع نصب | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (TR) | Tape & Reel (TR) |
| Lead Free | Yes (per DigiKey listing) | — |
| Application | Automotive Mirror Control (primary); also power window, seat control | — |
| LIN Bus Topology | Slave | — |
| Watchdog / Reset | Yes (SPI-controlled) | — |
| دمای کاری | [DATA_NEEDED: AEC-Q100 grade temperature range] | [DATA_NEEDED: operating temperature range] |
| وضعیت RoHS | [DATA_NEEDED: per official NXP declaration] | — |
| عملکرد | — | System Basis Chip (SBC) with LIN Transceiver |
| ولتاژ تغذیه | — | 5.5 V to 18 V |
| Load Dump Transient | — | Up to 27 V tolerant |
| LIN Compliance | — | LIN 2.0 / 2.1 / SAE J2602 |
| Integrated Vreg | — | 5 V linear / [DATA_NEEDED: output current mA] |
| Watchdog | — | Configurable window watchdog |
| Reset Output | — | Yes (push-pull / [DATA_NEEDED: polarity]) |
| High-Side Drivers | — | Yes (count [DATA_NEEDED: number]) |
| Low-Side Drivers | — | Yes (count [DATA_NEEDED: number]) |
| بسته‌بندی | — | 32-SOIC (0.295 inch, 7.50 mm width) |
| Lead Free / RoHS | — | Lead Free (per DigiKey listing); RoHS [DATA_NEEDED: explicit status] |