Analog Devices

AD603ARZ - 90 MHz Low-Noise Variable Gain Amplifier | Analog Devices

MPN: AD603ARZ ✓ فعال
10 V Vdss 12.5 mA Id 8-pin SOIC Package
حداقل سفارش: 1 |

AD603ARZ نمای کلی

The Analog Devices AD603ARZ is a low-noise, voltage-controlled variable gain amplifier for RF and IF automatic gain control systems, providing selectable gain from -11 dB to +31 dB, a 90 MHz bandwidth, and 1.3 nV/√Hz input-referred noise density in an 8-pin SOIC package.

A variable gain amplifier, or VGA, adjusts signal amplitude from an external control voltage while maintaining the operating point of downstream receivers. The AD603 belongs to the voltage-controlled amplifier class within the broader signal-chain amplifier hierarchy, supporting receiver front ends that must accommodate widely varying input levels without overloading later stages.

The device offers two principal gain modes. In its high-bandwidth mode, the amplifier provides a -11 dB to +31 dB range with 90 MHz bandwidth. Its low-bandwidth mode extends the gain range to +9 dB to more than +51 dB while reducing bandwidth to 9 MHz. One external resistor can establish an intermediate gain range, allowing the control voltage to cover a custom span between the fixed gain endpoints.

Its input-referred noise spectral density is only 1.3 nV/√Hz, making it suitable for precision RF and IF signal paths where amplifier noise would otherwise limit receiver sensitivity. Typical power consumption is 125 mW. The AD603 can operate from a single 10 V supply, and the manufacturer datasheet describes biasing the common pins to 5 V with a low-impedance path to ground.

Typical applications include RF and IF automatic gain control receivers, communications receivers, instrumentation amplifiers, spectrum-analysis equipment, and broadband measurement systems. The 90 MHz bandwidth supports high-frequency signal chains, while the high-gain mode suits applications requiring greater attenuation control at lower bandwidth.

When designing around the AD603ARZ, treat the common and bypass connections as low-impedance nodes and follow the manufacturer reference circuit for supply decoupling. Keep the gain-control connection short and place the external gain-setting resistor close to the device to limit parasitic feedback and preserve control accuracy.

This page combines the manufacturer gain, bandwidth, noise, and power specifications with package-level sourcing data, practical RF layout guidance, and a comparison of orderable AD603 variants for engineers evaluating variable gain amplifier implementations.

جایگزین‌های drop-in برای AD603ARZ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

AD603AR-REEL7

✅ جایگزین مستقیم
📦 8-pin SOIC
Same AD603 amplifier and 8-pin SOIC footprint; ordering code differs by reel-packaging designation, with no stated gain or bandwidth change

📋 جایگزین مرجع (خارج از کاتالوگ)

AD603ARZ-REEL7

✅ جایگزین مستقیم
📦 8-pin SOIC
Same AD603ARZ electrical design and 8-pin SOIC footprint; reel-packaging ordering code differs without a stated functional change

📋 جایگزین مرجع (خارج از کاتالوگ)

AD603AR-REEL

✅ جایگزین مستقیم
📦 8-pin SOIC
Same AD603 amplifier and 8-pin SOIC land pattern; reel ordering designation differs from AD603ARZ with no stated electrical difference

📋 جایگزین مرجع (خارج از کاتالوگ)

AD603ARZ-REEL

✅ جایگزین مستقیم
📦 8-pin SOIC
Same AD603ARZ amplifier and 8-pin SOIC land pattern; alternate reel ordering code without a stated gain, bandwidth, or noise change

📋 جایگزین مرجع (خارج از کاتالوگ)

AD603ARZ حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Variable Gain Amplifier (VGA)
Number of Circuits 1 circuit
High-Bandwidth Gain Range -11 dB to +31 dB
High-Bandwidth Mode Bandwidth 90 MHz
High-Gain Mode Range +9 dB to +51 dB or greater
High-Gain Mode Bandwidth 9 MHz
Input-Referred Noise Spectral Density 1.3 nV/√Hz
Power Consumption 125 mW
Example Single-Supply Operating Voltage 10 V
Common-Pin Bias Voltage in Reference Circuit 5 V
Package Type 8-pin SOIC
تعداد پین‌ها 8 pins
سبک نصب Surface mount
Control Method Voltage controlled
Application Category RF and IF automatic gain control
وضعیت چرخه عمر Production
Operating Supply Current 12.5 mA

راهنمای پیکربندی پین AD603ARZ 8-pin soic

پیکربندی پین برای AD603ARZ (پکیج 8-pin soic). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin soic برای AD603ARZ

داده پین‌آوت تفصیلی موجود نیست برای AD603ARZ.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

AD603ARZ مناسب است برای 6 کاربردs: RF Automatic Gain Control Receiver, IF Channel Gain Adjustment, Communications Receiver Front End, Spectrum Analyzer Signal Conditioning, Instrumentation and Low-Noise Measurement, Wide Dynamic-Range Signal Conditioning.

🌐

RF Automatic Gain Control Receiver

The AD603ARZ fits an RF AGC front end because its voltage-controlled gain covers -11 dB to +31 dB at 90 MHz bandwidth. Place it where the receiver must reduce gain for strong stations and increase it for weak stations without changing the downstream IF chain. Its 1.3 nV/√Hz input noise density helps preserve sensitivity at low gain settings, while the adjustable range limits overload risk at high gain. The practical trade-off is that a control-loop compensation network must be tuned around the amplifier's bandwidth and gain-control slope.

📡

IF Channel Gain Adjustment

In an IF signal chain, the AD603ARZ can attenuate or amplify an intermediate-frequency signal ahead of demodulation. Its 90 MHz mode bandwidth accommodates substantial IF content, while the high-gain mode trades bandwidth down to 9 MHz for a range extending above +51 dB. This makes the device useful when the receiver requires programmable attenuation or low-level gain recovery after filtering. Keep the gain-control trace short and reference the manufacturer bypass arrangement to avoid adding control noise to the IF path.

📶

Communications Receiver Front End

The AD603ARZ is appropriate for communications receivers whose input level varies over a broad dynamic range. The -11 dB to +31 dB gain span allows the receiver to normalize signal strength before subsequent stages, while 90 MHz bandwidth supports RF or IF signal paths with substantial bandwidth. Its low 1.3 nV/√Hz noise contribution helps maintain receiver sensitivity, and typical 125 mW power consumption keeps thermal loading moderate. The receiving chain must still account for overload margins and AGC loop settling.

📺

Spectrum Analyzer Signal Conditioning

Test and measurement systems can use the AD603ARZ to condition a signal before a later analysis stage. The voltage-controlled gain lets the instrument adapt to a broad range of input amplitudes, and the 90 MHz bandwidth supports wideband signal conditioning. The high-gain mode is useful when low-amplitude traces must be raised above later-stage noise, although its bandwidth falls to 9 MHz. Place the amplifier where saturation of the analyzer would otherwise occur, and use its low input noise density to avoid masking weak spectral components.

🔬

Instrumentation and Low-Noise Measurement

The AD603ARZ can provide adjustable amplification in instrumentation systems handling signals with widely varying magnitudes. Its 1.3 nV/√Hz input-referred noise density is advantageous when the measurement goal depends on resolving small signals, and the -11 dB attenuation capability protects later stages from large transients. The 90 MHz mode supports faster measurement signals, whereas high-gain operation is better suited to narrowband or low-level conditions. Use short control routing and carefully bypassed supplies to maintain measurement integrity.

⚙️

Wide Dynamic-Range Signal Conditioning

The AD603ARZ is useful when one amplifier must handle both strong and weak signals without an immediate change of hardware gain. Its combination of negative gain for attenuation, positive gain up to +31 dB at 90 MHz, and a high-gain mode beyond +51 dB gives designers several control ranges to select from. This flexibility simplifies front ends that combine AGC with operator-controlled attenuation. The main engineering trade-off is bandwidth reduction in the high-gain range, which must be checked against the minimum signal bandwidth required by the system.

خلاصه محصولات پیشنهادی

AD603ARZ-REEL7 Reel-packaged AD603ARZ for high-volume RF receiver production استفاده‌شده در: RF Automatic Gain Control Receiver, Instrumentation and Low-Noise Measurement AD604 Adjacent Analog Devices variable gain amplifier family member استفاده‌شده در: RF Automatic Gain Control Receiver, Spectrum Analyzer Signal Conditioning AD603AR-REEL7 Same-family AD603 ordering code for IF gain-control designs استفاده‌شده در: IF Channel Gain Adjustment, Instrumentation and Low-Noise Measurement AD603ARZ Analog Devices استفاده‌شده در: IF Channel Gain Adjustment, Spectrum Analyzer Signal Conditioning AD603ARZ-REEL Alternate reel ordering code of the primary variable gain amplifier استفاده‌شده در: Communications Receiver Front End, Wide Dynamic-Range Signal Conditioning AD603AR-REEL AD603 family ordering code for communications receiver assemblies استفاده‌شده در: Communications Receiver Front End, Wide Dynamic-Range Signal Conditioning
What is the operating gain range of the AD603ARZ?
The AD603ARZ provides a selectable gain range of -11 dB to +31 dB in its high-bandwidth operating mode. According to the Analog Devices AD603 data sheet, the gain is controlled by an external voltage, and an external resistor can be used to arrange an intermediate range. This wide attenuation and amplification range makes the amplifier useful in RF and IF automatic gain control loops where received signal strength can vary by many decibels.
What is the bandwidth of the AD603ARZ variable gain amplifier?
The AD603ARZ has a bandwidth of 90 MHz in its high-bandwidth mode, according to the Analog Devices AD603 data sheet. Its high-gain operating mode reduces bandwidth to 9 MHz while extending gain to +9 dB through +51 dB or greater. Designers can therefore trade wide signal bandwidth for additional gain range rather than using a separate amplifier for low-level IF stages.
What is the input noise density of the AD603ARZ?
The AD603ARZ has an input-referred noise spectral density of 1.3 nV/√Hz, as specified in the Analog Devices AD603 data sheet. This low-noise characteristic is especially valuable in RF receivers because noise introduced ahead of the gain-control stage is amplified along with the desired signal. A high input-referred noise figure would reduce the minimum signal level that the receiver can process reliably.
Where can I download the AD603ARZ datasheet PDF?
The official AD603ARZ data sheet can be downloaded from the Analog Devices product-document link on this page. It contains the gain-control equations, pin configuration, reference circuit, bypass requirements, and application information for RF and IF automatic gain control systems. Use the manufacturer document when assigning PCB tracks because the bypass and common-node connections directly affect stability and gain accuracy.
How do I find the AD603ARZ pinout and package drawing?
The AD603ARZ uses an 8-pin SOIC package, and the pin-description and package-drawing tables in the official Analog Devices AD603 data sheet define the exact connections. Confirm every net against that drawing before layout, particularly the supply, common, control, and bypass nodes. The package diagram associated with this page shows the 8-SOIC footprint outline.
Can the AD603ARZ operate from a single 10 V supply?
Yes, the Analog Devices AD603 data sheet describes a reference circuit that operates from a single 10 V supply. In that circuit, resistors bias the common pins of the internal amplifiers at 5 V, and the common node requires a low-impedance path to ground through 100 µF tantalum and 0.1 µF ceramic capacitors. Those bypass values should be reproduced or revalidated for the target supply and load.
What can replace the AD603ARZ without changing the PCB?
The closest board-compatible choices are the AD603 orderable codes listed on this page, which retain the same AD603 electrical design and 8-pin SOIC footprint while changing the order or packaging code. Use the manufacturer part-number comparison to confirm operating-temperature and qualification requirements before substitution. For a cross-brand equivalent, verify every pin function, gain-control slope, bandwidth, and supply condition rather than relying only on the amplifier category.
What is the best Analog Devices equivalent for the AD603ARZ?
The best Analog Devices equivalent is an AD603 ordering code that specifies the same 8-pin SOIC construction and electrical configuration as the AD603ARZ. The AD603AR-REEL7 and AD603ARZ-REEL7 variants preserve the amplifier function and footprint, while reel-oriented codes suit high-volume production handling. Confirm the temperature grade and screening requirements for the finished equipment before approving a change.
When should I choose the AD603ARZ instead of a fixed-gain amplifier?
Choose the AD603ARZ when the receiver must accommodate a wide range of input amplitudes and needs electronic gain control rather than a fixed attenuation or gain setting. Its -11 dB to +31 dB range and 90 MHz bandwidth cover signal-strength variations in RF and IF chains. A fixed-gain amplifier remains preferable when the signal level is predictable and no control loop or range adjustment is needed.
Is the AD603ARZ suitable for RF automatic gain control?
Yes, the AD603ARZ is designed for RF and IF automatic gain control systems and offers 90 MHz bandwidth in its wide-gain mode. Its voltage-controlled gain and 1.3 nV/√Hz input-referred noise density support receiver front ends where incoming signal levels vary. Keep control routing short, bypass the supply as shown in the reference circuit, and evaluate loop stability in the complete AGC architecture.
What are the key specifications engineers should know about the AD603ARZ?
The essential AD603ARZ specifications are a -11 dB to +31 dB gain range, 90 MHz high-bandwidth operation, a 9 MHz high-gain mode extending above +51 dB, 1.3 nV/√Hz input noise density, and 125 mW typical power consumption. The device is packaged as a single variable gain amplifier circuit in an 8-pin SOIC. These figures determine receiver sensitivity, control range, and achievable signal bandwidth.
How does the AD603ARZ differ from an ordinary voltage-gain amplifier?
The AD603ARZ differs from an ordinary voltage-gain amplifier by providing a calibrated, electronically adjustable gain span and dedicated high-gain operating characteristics. Its gain can be reduced for strong signals and increased for weak signals under control of an external voltage, which is essential for AGC loops. Conventional amplifiers generally provide a narrower, less specialized gain-control range.
Where can I buy the AD603ARZ online?
Use the Request a Quote form on this page to request AD603ARZ supply, current lead time, and order confirmation. The form is the direct route for commercial inquiries and does not require referring to another marketplace. Before requesting a large quantity, confirm the packaging code, operating-temperature grade, and any qualification requirements needed by your receiver design.
What is the current price of the AD603ARZ?
The current AD603ARZ commercial terms are handled through the Request a Quote form on this page, where availability, quantity breaks, and lead time can be confirmed for the exact ordering code. Pricing for this specialty amplifier changes with volume, lifecycle conditions, and packaging requirements. Submit the required quantity and target date so the quotation can be matched to your procurement schedule.
Is the AD603ARZ in stock and what is its lead time?
Request the current AD603ARZ stock position and lead time through the Request a Quote form on this page. Because the request can include your required quantity, shipment date, and packaging preference, it produces a more useful answer than a generic availability statement. Include the production schedule for the receiver so the supplier can confirm supply against your build plan.

داده‌های مرجع مهندسی برای AD603ARZ — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the AD603ARZ when a receiver or measurement system needs a voltage-controlled gain range, 90 MHz bandwidth, and 1.3 nV/√Hz input noise density in an 8-pin SOIC package. It is particularly suitable for RF and IF automatic gain control loops covering -11 dB to +31 dB, or for high-gain operation extending beyond +51 dB when 9 MHz bandwidth is acceptable. The listed AD603 ordering codes provide the closest board-compatible choices for automated production or alternate reel handling, but they do not offer a materially different electrical design. For a genuinely different amplifier, evaluate gain-control slope, supply requirements, pin functions, noise, stability, and thermal performance directly; changing amplifier families generally requires layout and circuit validation rather than a simple component substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول AD603AR-REEL7 AD603ARZ-REEL7 AD603AR-REEL AD603ARZ-REEL
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC - same footprint 8-pin SOIC - same footprint 8-pin SOIC - same footprint 8-pin SOIC - same footprint
Product Type Variable Gain Amplifier Variable Gain Amplifier Variable Gain Amplifier Variable Gain Amplifier Variable Gain Amplifier
High-Bandwidth Gain Range -11 dB to +31 dB -11 dB to +31 dB -11 dB to +31 dB -11 dB to +31 dB -11 dB to +31 dB
High-Bandwidth Mode Bandwidth 90 MHz 90 MHz 90 MHz 90 MHz 90 MHz
High-Gain Mode Bandwidth 9 MHz 9 MHz 9 MHz 9 MHz 9 MHz
Input-Referred Noise Spectral Density 1.3 nV/√Hz 1.3 nV/√Hz 1.3 nV/√Hz 1.3 nV/√Hz 1.3 nV/√Hz
Power Consumption 125 mW 125 mW 125 mW 125 mW 125 mW
Control Method Voltage controlled Voltage controlled Voltage controlled Voltage controlled Voltage controlled

تفاوت‌های کلیدی

  • Wide gain-control range with two distinct bandwidth modes (در مقابلAD603AR-REEL7)
  • Low input noise for sensitive receiver front ends (در مقابلAD603ARZ-REEL7)
  • Voltage-controlled amplification for AGC systems (در مقابلAD603AR-REEL)

یادداشت‌های طراحی

Reproduce the manufacturer's single-supply reference topology, including the low-impedance common-node return and the specified 100 µF tantalum plus 0.1 µF ceramic bypass arrangement. Place the ceramic capacitor at the device pins and keep the common connection free of long loops. These connections establish the internal amplifier bias point; long or inductive return paths can degrade gain accuracy and introduce unintended feedback.

Keep the external gain-control resistor close to the control pin and route the control signal away from high-impedance output and supply nodes. The AD603 can provide more than 40 dB of additional gain in its high-gain mode, so parasitic coupling on the control trace may be amplified along with the intended setting. Use a compact ground reference and a controlled-impedance driver when the control voltage must settle rapidly.

Do not treat the 90 MHz and 9 MHz figures as interchangeable specifications. The 90 MHz bandwidth applies to the -11 dB to +31 dB range, while the high-gain mode extends beyond +51 dB with bandwidth reduced to 9 MHz. Confirm that the intended signal bandwidth, gain range, and AGC loop dynamics can coexist; otherwise the amplifier may become the bandwidth limitation in the receiver chain.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The Analog Devices product page identifies the AD603 as a production part. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified, so these fields remain unknown. AEC-Q100 is not applicable because the AD603ARZ is not presented as an automotive-qualified variant.

جستجوهای مرتبط

ad603arz datasheet ad603arz reel7 ad603arz reel AD603ARZ pinout AD603ARZ datasheet pdf AD603ARZ schematic AD603ARZ equivalent AD603ARZ replacement AD603ARZ cross reference AD603ARZ vs AD603AR-REEL7 AD603ARZ 8 pin SOIC AD603ARZ price AD603ARZ stock Analog Devices AD603ARZ AD603ARZ application circuit

قطعات و اصطلاحات مرتبط

Analog Devices AD603ARZ AD603 AD603AR-REEL7 AD603ARZ-REEL7 AD603AR-REEL AD603ARZ-REEL AD604 variable gain amplifier VGA voltage-controlled amplifier automatic gain control AGC RF amplifier IF amplifier low-noise amplifier gain control input-referred noise spectral density 1.3 nV/√Hz 90 MHz bandwidth 9 MHz high-gain mode single-supply operation 8-pin SOIC surface-mount package RF automatic gain control communications receiver signal conditioning spectrum analysis
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ