AD620BRZ - Low-Power Instrumentation Amplifier | Analog Devices
MPN: AD620BRZ ✓ فعالAD620BRZ نمای کلی
An instrumentation amplifier is a precision amplifier category designed to reject common-mode interference while amplifying a small differential sensor signal. Its internal architecture typically uses three operational amplifiers, a differential gain stage, and carefully matched resistor networks. In power-system and sensor-instrumentation hierarchies, the AD620 sits between general-purpose operational amplifiers and application-specific signal-chain ICs.
The AD620 family offers a documented gain range of 1 to 10,000, with the gain established by one external resistor rather than a matched resistor network. This simplifies analog front-end design while maintaining the common-mode rejection and accuracy expected of an instrumentation amplifier. The low 1.3 mA maximum supply current makes the device suitable for portable, remote, and battery-operated instrumentation.
The AD620BRZ uses the manufacturer's B-grade precision classification, which distinguishes its gain and offset tolerance from the broader AD620 family. Its single-amplifier architecture provides one measurement channel in an 8-lead SOIC outline, making it appropriate for bridge sensors, current monitoring, and differential measurement systems where a low-noise analog signal must be conditioned before conversion or further processing.
Typical uses include weighing systems, pressure transducers, bridge-based strain measurements, industrial process monitoring, medical instrumentation, and current-shunt amplification. In each case, the external gain resistor and differential input arrangement allow the sensor output to be referenced accurately even when its common-mode voltage is substantially larger than the signal of interest.
Layout quality directly affects achievable performance. Place the gain-setting resistor close to the gain-setting pins, provide a clean ground return for the input reference, and avoid routing high-current switching nodes near the differential inputs. The single-supply and dual-supply limits, input common-mode range, maximum input voltage, and detailed settling behavior should be confirmed against the manufacturer datasheet before committing the circuit to production.
This page consolidates the device's gain capability, supply-current limit, package information, sourcing route, drop-in alternatives, and application-oriented design guidance into one engineering reference. It also identifies the comparisons and layout constraints that matter most when the AD620BRZ is considered against functionally similar instrumentation amplifiers.
جایگزینهای drop-in برای AD620BRZ — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای AD620BRZ (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Gain Range, Number of Channels, RoHS Status.
AD620ARZ
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←AD620BR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LT1167IS8
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←AD620BRZ حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Single-amplifier instrumentation amplifier |
| Number of Channels | 1 channel |
| Gain Range | 1 to 10,000 |
| Gain-Setting Method | 1 external resistor |
| Maximum Supply Current | 1.3 mA |
| Maximum Supply Voltage | ±18 V |
| Supply Type | Single or dual supply |
| بستهبندی | 8-lead SOIC |
| نوع نصب | Surface mount |
| Differential Input | Instrumentation-amplifier differential input architecture |
راهنمای پیکربندی پین AD620BRZ 8-lead soic
پیکربندی پین برای AD620BRZ (پکیج 8-lead soic). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای AD620BRZ.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
AD620BRZ مناسب است برای 6 کاربردs: Bridge-Based Pressure and Strain Measurement, Battery-Powered Portable Sensor Node, Industrial Process-Control Signal Conditioning, Current-Shunt and Power-System Monitoring, Medical and Bio-Signal Instrumentation, Portable Weighing and Load-Cell Systems.
Bridge-Based Pressure and Strain Measurement
The AD620BRZ fits Wheatstone bridge front ends because it amplifies the small differential bridge excitation error while rejecting the larger common-mode voltage. A gain from 1 to 10,000 allows the same amplifier family to serve moderate pressure transducers and highly sensitive strain gauges. One external gain resistor simplifies calibration and inventory management. Its 1.3 mA maximum supply current also supports compact remote sensor electronics. Place the gain resistor close to the device, route the two bridge inputs as a tight differential pair, and add an input filter when long sensor cables permit external interference to enter the signal path.
پیشنهادی
Battery-Powered Portable Sensor Node
The AD620BRZ is useful in portable sensing systems where amplifier power consumption directly affects battery life. Its maximum supply current of 1.3 mA allows a sensor signal to be amplified without dominating the energy budget of a remote node. The single-resistor gain setting supports programmable sensitivity across different sensor ranges, while the compact 8-lead SOIC package leaves board area for radio, processing, and protection circuitry. Verify the input common-mode range at the minimum operating supply and use a low-power shutdown strategy upstream when the measurement duty cycle is low.
پیشنهادی
Industrial Process-Control Signal Conditioning
The AD620BRZ can condition a low-level differential process signal before it reaches an analog-to-digital converter or control loop. Its gain range of 1 to 10,000 accommodates pressure, temperature, and flow transmitters that use current loops or bridge outputs. The device’s common-mode rejection capability is central to industrial use because machinery often introduces substantial ground-coupled noise. Keep the analog signal path away from relay coils, motor drive outputs, and switching power nodes. A dedicated analog ground and a short return to the transducer can prevent measurement error that is otherwise difficult to distinguish from a sensor fault.
پیشنهادی
Current-Shunt and Power-System Monitoring
The AD620BRZ is appropriate for measuring the small voltage generated across a current shunt or sense resistor. The differential input rejects the high common-mode voltage present on the shunt while the selectable gain raises the useful signal to an ADC-friendly level. This arrangement is used in power supplies, battery systems, motor controls, and energy meters where galvanic isolation and safety barriers must not be disturbed by the measurement stage. Route the shunt connections as a differential pair and avoid sharing their return path with high-current switching currents, since small trace resistance can otherwise generate an error comparable to the signal.
پیشنهادی
Medical and Bio-Signal Instrumentation
The AD620BRZ can amplify differential bio-signal or physiological sensor outputs when the required bandwidth and noise performance match the measurement. Its instrumentation-amplifier topology supports low-level inputs while rejecting common-mode voltage, and the gain range allows selection of the appropriate sensitivity for each channel. The 1.3 mA maximum supply current is valuable in battery-operated medical equipment and portable patient monitors. Use shielded sensor connections, guarded analog layouts, and appropriately placed protection components; confirm the complete signal-chain safety and isolation requirements separately from the amplifier selection.
پیشنهادی
Portable Weighing and Load-Cell Systems
The AD620BRZ suits portable scales and load-cell indicators because a load cell produces a differential millivolt-level signal proportional to applied force. The amplifier raises that signal while rejecting the mechanical bridge’s common-mode voltage, and the one-resistor gain setting supports several load-cell sensitivities. Its low supply current benefits bench scales and battery-assisted industrial weighing equipment. For mechanical systems, keep the analog routing compact and place any input protection outside the sensitive input path where possible. Validate zero drift and gain error over the required temperature range because mechanical loading conditions can change the balance of the bridge network.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای AD620BRZ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | AD620ARZ | AD620BR | LT1167 |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Linear Technology |
| Package | 8-lead SOIC | 8-lead SOIC - same | 8-lead SOIC - same | 8-lead SOIC - same |
| Device Type | Single-channel instrumentation amplifier | Single-channel instrumentation amplifier | Single-channel instrumentation amplifier | Instrumentation amplifier |
| Gain Range | 1 to 10,000 | 1 to 10,000 | 1 to 10,000 | Gain compatible with AD620 |
| Gain-Setting Method | 1 external resistor | 1 external resistor | 1 external resistor | AD620-compatible gain network |
| Number of Channels | 1 | 1 | 1 | 1 |
| Pin and Gain Compatibility | AD620-family 8-lead SOIC pinout | Identical pinout and gain configuration | AD620-family SOIC configuration | Pin and gain compatible with AD620 |
تفاوتهای کلیدی
- Tighter precision grade within the AD620 family (در مقابلAD620ARZ)
- Low supply consumption for precision instrumentation (در مقابلLT1167)
- Single-resistor gain programming with a broad range (در مقابلAD620ARZ)
- Compact 8-lead SOIC implementation (در مقابلAD620ARZ)
یادداشتهای طراحی
Connect the differential inputs and their reference to a compact analog signal path. Route the two inputs as a closely matched pair, avoid sharing copper with switching-current returns, and keep the gain-setting resistor adjacent to the amplifier. Long unbalanced input traces can convert common-mode interference into differential error, which directly reduces measurement accuracy.
Separate sensitive analog routing from high-current and high-voltage nodes associated by relays, motor drives, power converters, or shunt inputs. Use a dedicated analog-ground region where the board design permits it, and connect it to the system ground with a controlled return path. This reduces ground potential differences that the instrumentation amplifier must reject.
Do not treat every AD620-family ordering code as electrically identical. The AD620BRZ carries a more precise grade than the AD620ARZ, so replacing it with the latter changes gain and offset tolerances. Likewise, the LT1167 requires verification of noise, supply behavior, common-mode range, and settling before it is approved for production.
Estimated: with a 5 V single supply, a 2.5 V output, and 1 mA signal load, the amplifier signal-path dissipation is approximately 2.5 mW, excluding the external gain resistor and board leakage. Actual device dissipation follows from the no-load supply current plus output-stage current, so use the manufacturer quiescent-current and output-current specifications for the final thermal budget.
اطلاعات انطباق
Confirm environmental and material compliance declarations against the current manufacturer product page before release to production.