Analog Devices

AD620BRZ - Low-Power Instrumentation Amplifier | Analog Devices

N.º da peça: AD620BRZ ✓ Ativo
1.3 mA Vdss 8-lead SOIC Package
MOQ: 1 |

AD620BRZ Visão geral

The Analog Devices AD620BRZ is a single-amplifier, low-power instrumentation amplifier that amplifies differential signals with gains from 1 to 10,000 using a single external resistor. The device is supplied in an 8-lead SOIC package and operates from dual supplies of up to ±18 V while consuming a maximum supply current of 1.3 mA.

An instrumentation amplifier is a precision amplifier category designed to reject common-mode interference while amplifying a small differential sensor signal. Its internal architecture typically uses three operational amplifiers, a differential gain stage, and carefully matched resistor networks. In power-system and sensor-instrumentation hierarchies, the AD620 sits between general-purpose operational amplifiers and application-specific signal-chain ICs.

The AD620 family offers a documented gain range of 1 to 10,000, with the gain established by one external resistor rather than a matched resistor network. This simplifies analog front-end design while maintaining the common-mode rejection and accuracy expected of an instrumentation amplifier. The low 1.3 mA maximum supply current makes the device suitable for portable, remote, and battery-operated instrumentation.

The AD620BRZ uses the manufacturer's B-grade precision classification, which distinguishes its gain and offset tolerance from the broader AD620 family. Its single-amplifier architecture provides one measurement channel in an 8-lead SOIC outline, making it appropriate for bridge sensors, current monitoring, and differential measurement systems where a low-noise analog signal must be conditioned before conversion or further processing.

Typical uses include weighing systems, pressure transducers, bridge-based strain measurements, industrial process monitoring, medical instrumentation, and current-shunt amplification. In each case, the external gain resistor and differential input arrangement allow the sensor output to be referenced accurately even when its common-mode voltage is substantially larger than the signal of interest.

Layout quality directly affects achievable performance. Place the gain-setting resistor close to the gain-setting pins, provide a clean ground return for the input reference, and avoid routing high-current switching nodes near the differential inputs. The single-supply and dual-supply limits, input common-mode range, maximum input voltage, and detailed settling behavior should be confirmed against the manufacturer datasheet before committing the circuit to production.

This page consolidates the device's gain capability, supply-current limit, package information, sourcing route, drop-in alternatives, and application-oriented design guidance into one engineering reference. It also identifies the comparisons and layout constraints that matter most when the AD620BRZ is considered against functionally similar instrumentation amplifiers.

Alternativas drop-in para AD620BRZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com AD620BRZ (mesmo formato e footprint) — diferindo em Package, Gain Range, Number of Channels, RoHS Status.

Analog Devices
Package: 8-SOIC (0.154", 3.90mm Width)
RoHS Status: Compliant
Comparar com AD620BRZ →
Analog Devices
Package: 8-pin SOIC (SO-8)
Gain Range: 1 to 10,000 (single external resistor)
Number of Channels: 1
Comparar com AD620BRZ →

AD620ARZ

✅ Drop-In
Analog Devices
📦 8-lead SOIC
Instrumentation Amplifier · 1 · 1 to 10,000 · ±2.3 V to ±18 V · 1.3 mA · 100 dB · 50 µV · 1.0 nA

Consulte o preço

Ver ficha técnica →

AD620BR

✅ Drop-In
Analog Devices
📦 8-lead SOIC
Instrumentation amplifier · 1 circuit · 3-op-amp instrumentation amplifier · 1 to 10,000 · 1 external resistor · 50 µV maximum · 1.2 V/µs · 120 kHz

Consulte o preço

Ver ficha técnica →

LT1167IS8

✅ Drop-In
Analog Devices
📦 8-lead SOIC
Instrumentation Amplifier · 1 · 1 to 10,000 (single external resistor) · 7.5 nV/√Hz at 1 kHz · 60 µV · 1.2 V/µs · 1 MHz · 0.9 mA

Consulte o preço

Ver ficha técnica →

AD620BRZ Classificações máximas e características elétricas

Device Type Single-amplifier instrumentation amplifier
Number of Channels 1 channel
Gain Range 1 to 10,000
Gain-Setting Method 1 external resistor
Maximum Supply Current 1.3 mA
Maximum Supply Voltage ±18 V
Supply Type Single or dual supply
Encapsulamento 8-lead SOIC
Tipo de montagem Surface mount
Differential Input Instrumentation-amplifier differential input architecture

Guia de Configuração de Pinos do AD620BRZ 8-lead soic

Configuração de pinos para AD620BRZ (pacote 8-lead soic). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 8-lead soic para AD620BRZ

Nenhum dado detalhado de pinagem disponível para AD620BRZ.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AD620BRZ é adequado para 6 aplicaçãos: Bridge-Based Pressure and Strain Measurement, Battery-Powered Portable Sensor Node, Industrial Process-Control Signal Conditioning, Current-Shunt and Power-System Monitoring, Medical and Bio-Signal Instrumentation, Portable Weighing and Load-Cell Systems.

🏭

Bridge-Based Pressure and Strain Measurement

The AD620BRZ fits Wheatstone bridge front ends because it amplifies the small differential bridge excitation error while rejecting the larger common-mode voltage. A gain from 1 to 10,000 allows the same amplifier family to serve moderate pressure transducers and highly sensitive strain gauges. One external gain resistor simplifies calibration and inventory management. Its 1.3 mA maximum supply current also supports compact remote sensor electronics. Place the gain resistor close to the device, route the two bridge inputs as a tight differential pair, and add an input filter when long sensor cables permit external interference to enter the signal path.

🔋

Battery-Powered Portable Sensor Node

The AD620BRZ is useful in portable sensing systems where amplifier power consumption directly affects battery life. Its maximum supply current of 1.3 mA allows a sensor signal to be amplified without dominating the energy budget of a remote node. The single-resistor gain setting supports programmable sensitivity across different sensor ranges, while the compact 8-lead SOIC package leaves board area for radio, processing, and protection circuitry. Verify the input common-mode range at the minimum operating supply and use a low-power shutdown strategy upstream when the measurement duty cycle is low.

⚡

Industrial Process-Control Signal Conditioning

The AD620BRZ can condition a low-level differential process signal before it reaches an analog-to-digital converter or control loop. Its gain range of 1 to 10,000 accommodates pressure, temperature, and flow transmitters that use current loops or bridge outputs. The device’s common-mode rejection capability is central to industrial use because machinery often introduces substantial ground-coupled noise. Keep the analog signal path away from relay coils, motor drive outputs, and switching power nodes. A dedicated analog ground and a short return to the transducer can prevent measurement error that is otherwise difficult to distinguish from a sensor fault.

🔋

Current-Shunt and Power-System Monitoring

The AD620BRZ is appropriate for measuring the small voltage generated across a current shunt or sense resistor. The differential input rejects the high common-mode voltage present on the shunt while the selectable gain raises the useful signal to an ADC-friendly level. This arrangement is used in power supplies, battery systems, motor controls, and energy meters where galvanic isolation and safety barriers must not be disturbed by the measurement stage. Route the shunt connections as a differential pair and avoid sharing their return path with high-current switching currents, since small trace resistance can otherwise generate an error comparable to the signal.

💊

Medical and Bio-Signal Instrumentation

The AD620BRZ can amplify differential bio-signal or physiological sensor outputs when the required bandwidth and noise performance match the measurement. Its instrumentation-amplifier topology supports low-level inputs while rejecting common-mode voltage, and the gain range allows selection of the appropriate sensitivity for each channel. The 1.3 mA maximum supply current is valuable in battery-operated medical equipment and portable patient monitors. Use shielded sensor connections, guarded analog layouts, and appropriately placed protection components; confirm the complete signal-chain safety and isolation requirements separately from the amplifier selection.

⚖️

Portable Weighing and Load-Cell Systems

The AD620BRZ suits portable scales and load-cell indicators because a load cell produces a differential millivolt-level signal proportional to applied force. The amplifier raises that signal while rejecting the mechanical bridge’s common-mode voltage, and the one-resistor gain setting supports several load-cell sensitivities. Its low supply current benefits bench scales and battery-assisted industrial weighing equipment. For mechanical systems, keep the analog routing compact and place any input protection outside the sensitive input path where possible. Validate zero drift and gain error over the required temperature range because mechanical loading conditions can change the balance of the bridge network.

Resumo dos produtos recomendados

AD620ARZ Analog Devices Usado em: Bridge-Based Pressure and Strain Measurement, Battery-Powered Portable Sensor Node, Industrial Process-Control Signal Conditioning, Current-Shunt and Power-System Monitoring, Medical and Bio-Signal Instrumentation, Portable Weighing and Load-Cell Systems LT1167 Pin and gain compatible instrumentation amplifier Usado em: Bridge-Based Pressure and Strain Measurement, Industrial Process-Control Signal Conditioning, Medical and Bio-Signal Instrumentation AD620BR AD620-family instrumentation amplifier Usado em: Battery-Powered Portable Sensor Node, Current-Shunt and Power-System Monitoring, Portable Weighing and Load-Cell Systems
What is the AD620BRZ and what are its main specifications?
The AD620BRZ is a single-channel, low-power instrumentation amplifier with a programmable gain of 1 to 10,000, a maximum supply current of 1.3 mA, and an 8-lead SOIC package. According to the Analog Devices AD620 product information, one external resistor sets the gain, making the device suitable for precision differential-signal conditioning where low power and compact implementation are priorities.
How is the gain of an AD620BRZ set?
The AD620BRZ gain is set with one external resistor connected to the gain-setting terminals. According to the Analog Devices AD620 product information, the supported gain range is 1 to 10,000. Place this resistor close to the device to minimize parasitic resistance and maintain the intended gain accuracy; consult the manufacturer gain-setting equation for the required resistance.
What supply voltage can the AD620BRZ use?
The AD620BRZ supports a maximum supply amplitude of ±18 V, or 36 V across the supply pins. It can be used in dual-supply circuits or in single-supply systems when the input and output operating ranges meet the circuit requirements. Confirm the input common-mode range and output swing in the manufacturer datasheet before choosing a single-supply rail.
Why is the AD620BRZ suitable for battery-powered instrumentation?
The AD620BRZ is suitable for battery-powered equipment because its maximum supply current is only 1.3 mA. Analog Devices identifies the AD620 as a low-power instrumentation amplifier suited to portable and remote applications. That low consumption is especially valuable in distributed sensor nodes where each milliampere materially affects battery replacement intervals.
Where can I download the AD620BRZ datasheet PDF?
The AD620BRZ datasheet and product information are available from the official Analog Devices AD620 product page at https://www.analog.com/en/products/ad620.html. That page provides the manufacturer documentation, electrical characteristics, pin information, and ordering details for the AD620 family, including the AD620BRZ orderable member.
Where can I find the AD620BRZ pinout?
The AD620BRZ pinout is shown in the manufacturer datasheet linked from the Analog Devices AD620 product page. The device is an 8-lead SOIC, so use the pin-description and typical-connection diagrams there to assign differential inputs, gain-setting terminals, supply pins, and outputs. Do not rely on a generic 8-pin drawing when board layout is being released.
What can replace the AD620BRZ as a drop-in part?
The AD620ARZ is the closest documented drop-in candidate because it shares the AD620 family architecture, package, pinout, and gain configuration with the AD620BRZ. The AD620BR is another same-family SOIC option. The LT1167 is a cross-brand candidate described as pin and gain compatible, but noise, supply operation, and settling should be revalidated before substitution.
Is the AD620ARZ interchangeable with the AD620BRZ?
The AD620ARZ is functionally interchangeable with the AD620BRZ because both use the same AD620 architecture, package, pinout, and gain configuration. The comparison identifies the AD620BRZ as the tighter grade for gain and offset specifications, so the AD620ARZ can serve as a direct substitute in most designs when its relaxed accuracy still satisfies the measurement requirement.
What is the best Linear Technology equivalent for the AD620BRZ?
The LT1167 is the best documented cross-brand equivalent for the AD620BRZ because it was designed to be pin and gain compatible with the AD620. In most layouts it can be treated as a straight swap, but the designer must still verify supply voltage, noise performance, common-mode range, and transient response against the original system requirements.
When should I choose the AD620BRZ instead of the AD620ARZ?
Choose the AD620BRZ when gain and offset accuracy are critical to the measurement result or when the AD620ARZ grade would widen production tolerances. The AD620ARZ remains attractive when the application can tolerate relaxed precision. Both use the same SOIC footprint and gain configuration, so the decision should be based on measured accuracy requirements rather than layout changes.
Is the AD620BRZ suitable for pressure-transducer and bridge-sensor measurements?
Yes, the AD620BRZ is suitable for pressure-transducer and bridge-sensor measurements because it amplifies small differential signals while rejecting common-mode voltage. Its gain of 1 to 10,000 and single-resistor gain setting support typical bridge outputs. Apply an input low-pass filter when sensor leads are long or the environment contains substantial interference.
What is the AD620BRZ vs AD620BR difference?
The AD620BRZ and AD620BR are both AD620-family instrumentation amplifiers offered in an 8-lead SOIC configuration, and both support gain settings from 1 to 10,000. Their orderable suffixes distinguish electrical grade and packaging options. Review the manufacturer ordering table to confirm the exact grade, temperature range, and shipping format required for the production build.
What are the key specifications engineers should know about the AD620BRZ?
The key AD620BRZ specifications are a 1 to 10,000 gain range, one-resistor gain programming, 1.3 mA maximum supply current, operation up to ±18 V, one measurement channel, and an 8-lead SOIC package. These characteristics make it a compact choice for low-power differential instrumentation. Confirm noise, offset, bandwidth, and common-mode limits against the manufacturer datasheet.
Where can I buy the AD620BRZ, and what is its price?
The AD620BRZ can be sourced through the Request a Quote form on this page, which returns current commercial terms for the exact manufacturer part number and package configuration. Because pricing and stock change by quantity and channel, submit the required quantity, target date, and shipment destination with the request to receive an actionable quotation.
How long is the lead time for the AD620BRZ?
The current lead time for the AD620BRZ should be confirmed through the Request a Quote form on this page. Include your required quantity, production schedule, and approved manufacturer part number so the commercial team can identify available supply and the appropriate delivery plan for your build.
Is the AD620BRZ currently in stock?
The AD620BRZ is shown as available by multiple catalog listings, but inventory levels move quickly and are not a production commitment. Use the Request a Quote form on this page to request current stock confirmation, factory lead time, and the exact package and tape-and-reel configuration required for your assembly process.

Dados de referência de engenharia para AD620BRZ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the AD620BRZ when the measurement requires a low-power instrumentation amplifier with a 1 to 10,000 gain range and tighter gain and offset tolerances. Its 1.3 mA maximum supply current, single-resistor gain setting, and 8-lead SOIC package suit battery-operated nodes, bridge sensors, pressure transducers, and current monitoring. Choose the AD620ARZ when the same pinout and gain configuration are needed but the relaxed accuracy grade is acceptable. Choose the AD620BR when its specific grade and ordering options meet the product requirements. Consider the LT1167 when a cross-brand pin and gain compatible design is preferred, but verify noise, supply range, common-mode behavior, and transient response before releasing a production board.

Comparação com alternativas

Parâmetro Este produto AD620ARZ AD620BR LT1167
Brand Analog Devices Analog Devices Analog Devices Linear Technology
Package 8-lead SOIC 8-lead SOIC - same 8-lead SOIC - same 8-lead SOIC - same
Device Type Single-channel instrumentation amplifier Single-channel instrumentation amplifier Single-channel instrumentation amplifier Instrumentation amplifier
Gain Range 1 to 10,000 1 to 10,000 1 to 10,000 Gain compatible with AD620
Gain-Setting Method 1 external resistor 1 external resistor 1 external resistor AD620-compatible gain network
Number of Channels 1 1 1 1
Pin and Gain Compatibility AD620-family 8-lead SOIC pinout Identical pinout and gain configuration AD620-family SOIC configuration Pin and gain compatible with AD620

Principais diferenciais

  • Tighter precision grade within the AD620 family (vs AD620ARZ)
  • Low supply consumption for precision instrumentation (vs LT1167)
  • Single-resistor gain programming with a broad range (vs AD620ARZ)
  • Compact 8-lead SOIC implementation (vs AD620ARZ)

Notas de projeto

Connect the differential inputs and their reference to a compact analog signal path. Route the two inputs as a closely matched pair, avoid sharing copper with switching-current returns, and keep the gain-setting resistor adjacent to the amplifier. Long unbalanced input traces can convert common-mode interference into differential error, which directly reduces measurement accuracy.

Separate sensitive analog routing from high-current and high-voltage nodes associated by relays, motor drives, power converters, or shunt inputs. Use a dedicated analog-ground region where the board design permits it, and connect it to the system ground with a controlled return path. This reduces ground potential differences that the instrumentation amplifier must reject.

Do not treat every AD620-family ordering code as electrically identical. The AD620BRZ carries a more precise grade than the AD620ARZ, so replacing it with the latter changes gain and offset tolerances. Likewise, the LT1167 requires verification of noise, supply behavior, common-mode range, and settling before it is approved for production.

Estimated: with a 5 V single supply, a 2.5 V output, and 1 mA signal load, the amplifier signal-path dissipation is approximately 2.5 mW, excluding the external gain resistor and board leakage. Actual device dissipation follows from the no-load supply current plus output-stage current, so use the manufacturer quiescent-current and output-current specifications for the final thermal budget.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Confirm environmental and material compliance declarations against the current manufacturer product page before release to production.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ad620brz datasheet AD620BRZ datasheet pdf AD620BRZ pinout AD620BRZ gain resistor AD620BRZ supply current AD620BRZ instrumentation amplifier Analog Devices AD620BRZ AD620BRZ SOIC-8 replacement AD620BRZ vs AD620ARZ AD620BRZ vs LT1167 AD620BRZ drop-in replacement AD620BRZ price AD620BRZ stock AD620BRZ bridge sensor amplifier AD620BRZ gain equation

Componentes & termos relacionados

Analog Devices AD620 AD620BRZ AD620ARZ AD620BR LT1167 Linear Technology instrumentation amplifier precision amplifier differential amplifier low-dropout regulator gain-setting resistor common-mode rejection ratio input offset voltage gain error Wheatstone bridge load cell pressure transducer current shunt battery-powered sensor 8-lead SOIC surface-mount package RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ