Analog Devices

AD624AD/+ - Precision Instrumentation Amplifier | Analog Devices

MPN: AD624AD/+ ✓ فعال
6 V to 18 V Vdss 16-lead ceramic DIP (CDIP) Package 0.2 V p-p at 10 Hz Speed
حداقل سفارش: 1 |

AD624AD/+ نمای کلی

The Analog Devices AD624AD/+ is a high-precision, low-noise instrumentation amplifier for low-level transducer signals, with programmable gains of 1, 100, 200, 500, and 1000, a 25 MHz gain-bandwidth product, a 5 V/µs slew rate, and a 15 µs settling time in a 16-lead ceramic DIP package. Designed around load cells, strain gauges, and pressure transducers, it combines high gain accuracy with low noise and strong common-mode rejection for sensitive measurement systems.

An instrumentation amplifier is a differential amplifier optimized for amplifying small voltage differences superimposed on larger common-mode voltages. Within the signal-chain hierarchy, it sits between the transducer and the analog signal-conditioning stage, providing differential input, high input impedance, stable closed-loop gain, and accurate gain-setting behavior. This makes the AD624AD/+ useful when the source resistance can vary or when a conventional difference amplifier would not provide sufficient common-mode rejection.

The AD624 achieves trimmed gains without external components at gain selections of 1, 100, 200, 500, and 1000. Its low-noise behavior, gain temperature coefficient of 5 ppm maximum at gain 1, input offset-voltage drift of 0.25 µV/°C maximum, and CMRR of 130 dB minimum at DC to 1000 Hz support accurate bridge measurements. Maximum nonlinearity is 0.001% at gain 200, helping preserve measurement integrity across the usable signal range.

For high-speed data-acquisition systems, the 25 MHz gain-bandwidth product permits signal amplification without sacrificing required bandwidth. The 5 V/µs slew rate supports rapid output transitions, while the 15 µs settling time defines useful settling behavior after a step input. These characteristics complement the precision dc specifications and make the amplifier suitable for both slow transducer measurements and higher-speed instrumentation.

Typical uses include load-cell weighing systems, strain-gauge bridges, pressure transducers, biomedical instrumentation, industrial process monitoring, and precision data-acquisition front ends. In a bridge circuit, the small differential output is amplified while common-mode excitation and environmental disturbances are rejected. The gain-selection network and the sensor bridge determine the usable sensitivity and should be evaluated together for offset, noise, saturation, and calibration requirements.

Designers should verify the complete AD624AD/+ pin assignment against the manufacturer datasheet before assigning PCB tracks. Supply bypassing, input grounding, bridge excitation return paths, and output settling time directly affect accuracy. Because the 16-lead ceramic DIP package is not represented by a pin-specific package diagram in the package library, use the manufacturer pin-description table for layout and inspection work.

This product page combines the manufacturer’s electrical characteristics with application guidance, drop-in-family comparisons, and practical design notes. It also distinguishes the AD624AD/+ from temperature-grade and package-code variants, helping engineers confirm ordering identity and PCB compatibility before committing a design to production.

جایگزین‌های drop-in برای AD624AD/+ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای AD624AD/+ (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Input Offset Voltage, Mounting Type, Settling Time, Slew Rate.

Analog Devices
Package: 16-CDIP (0.300 inch, 7.62 mm)
Input Offset Voltage: 200 uV
Mounting Type: Through Hole
Analog Devices
Package: 16-lead ceramic DIP
Input Offset Voltage: 75 µV
Mounting Type: Through-hole
Analog Devices
Package: 16-CDIP (0.300 in, 7.62 mm)
Mounting Type: Through-hole ceramic DIP
Settling Time: 15 us

AD624ADZ

✅ جایگزین مستقیم
Analog Devices
📦 16-lead ceramic DIP (CDIP)
Instrumentation Amplifier · 1 · 25 MHz · 5 V/us · 15 us · 200 uV · +/-6 V to +/-18 V · 1, 100, 200, 500, 1000

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

AD624BDZ

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Analog Devices
📦 16-lead ceramic DIP (CDIP)
Precision instrumentation amplifier · 1 circuit · 25 MHz · 5 V/µs · 15 µs · 75 µV · ±6 V to ±18 V · 1, 100, 200, 500, and 1000

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

AD624CDZ

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Analog Devices
📦 16-lead ceramic DIP (CDIP)
Precision instrumentation amplifier · 1 circuit · 25 MHz · 5 V/us · 15 us · 1, 100, 200, 500, and 1000 · Present; external resistor supported for other gains · 15 nA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

AD624AD/+ حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type High-precision, low-noise instrumentation amplifier
Number of Amplifiers 1 circuit
Trimmed Gain Settings 1, 100, 200, 500, and 1000
Gain-Bandwidth Product 25 MHz
Slew Rate 5 V/µs
Settling Time 15 µs
ولتاژ تغذیه 6 V to 18 V
Input Offset Voltage 200 µV
Input Offset Voltage Drift 0.25 µV/°C maximum
Common-Mode Rejection Ratio 130 dB minimum from DC to 1000 Hz
Low Gain Temperature Coefficient 5 ppm maximum at gain 1
Nonlinearity 0.001% maximum at gain 200
Low-Frequency Noise 0.2 V p-p at 10 Hz
Gain Programming Pin-programmable
بسته‌بندی 16-lead ceramic DIP (CDIP)
Primary Transducer Applications Load cells, strain gauges, and pressure transducers

راهنمای پیکربندی پین AD624AD/+ 16-lead ceramic dip (cdip)

پیکربندی پین برای AD624AD/+ (پکیج 16-lead ceramic dip (cdip)). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 16-lead ceramic dip (cdip) برای AD624AD/+

داده پین‌آوت تفصیلی موجود نیست برای AD624AD/+.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

AD624AD/+ مناسب است برای 6 کاربردs: Load-Cell Weighing Systems, Strain-Gauge Bridge Measurement, Pressure Transducer Signal Conditioning, Precision Data-Acquisition Front Ends, Medical and Biomedical Instrumentation, Industrial Process and Control Instrumentation.

🏭

Load-Cell Weighing Systems

The AD624AD/+ fits load-cell front ends where a small differential bridge signal must be amplified while excitation-related common-mode voltage is rejected. Its trimmed gains of 1, 100, 200, 500, and 1000 allow the amplifier to support several transducer sensitivities without external gain-setting components. The 130 dB minimum CMRR from DC to 1000 Hz and 0.25 µV/°C maximum input-offset drift are particularly useful when mechanical changes, temperature variation, or long cable runs could otherwise corrupt the measurement. In a practical weighing system, the amplifier sits between the bridge and the converter or controller, while a low-reference-voltage ADC preserves the amplified signal without allowing the amplifier to saturate.

🔧

Strain-Gauge Bridge Measurement

The AD624AD/+ is suitable for strain-gauge bridges that produce millivolt-level differential signals in the presence of a much larger excitation voltage. Its differential input and 130 dB minimum CMRR reduce the effect of common-mode variation, while the 25 MHz gain-bandwidth product provides more bandwidth than a purely slow precision-amplifier design. Gain can be selected at 1, 100, 200, 500, or 1000 without external resistors, simplifying calibration across different bridge sensitivities. Layout quality remains essential: keep bridge excitation current from sharing sensitive return paths with the amplifier ground, and follow the manufacturer application guidance for input filtering and supply decoupling.

🧩

Pressure Transducer Signal Conditioning

The AD624AD/+ can condition the low-level differential output of a resistive pressure transducer when both accuracy and response speed matter. The manufacturer’s maximum nonlinearity of 0.001% at gain 200 supports precise signal-chain budgeting, while the 5 V/µs slew rate and 15 µs settling time allow operation with faster pressure events than a low-bandwidth instrumentation amplifier would permit. Use the trimmed gain that produces useful ADC headroom without overdriving the output. The pressure bridge’s excitation voltage, source resistance, thermal drift, and shielding arrangement should be evaluated together because the amplifier cannot compensate for unstable bridge excitation or excessive common-mode input range.

📟

Precision Data-Acquisition Front Ends

The AD624AD/+ works as an analog front end for precision data-acquisition systems that must recover small differential sensor signals before conversion. Its 25 MHz gain-bandwidth product supports a wider signal bandwidth than a slow dc-only amplifier, and the 15 µs settling time provides a defined basis for acquisition timing. Trimming the gain to 100, 200, 500, or 1000 increases the signal relative to downstream converter noise and quantization error. The system designer must still verify the output range, settling accuracy at the selected gain, common-mode limits, and sample-and-hold acquisition time of the following converter so that the complete chain preserves the amplifier’s precision.

💊

Medical and Biomedical Instrumentation

The AD624AD/+ can amplify low-level physiological or diagnostic sensor signals when the system requires high common-mode rejection and low input-offset drift. The 0.25 µV/°C maximum drift specification helps maintain calibration stability as patient-sensor or ambient temperature changes, while the low-noise architecture supports extraction of small biopotential or bridge-derived signals. Its differential input is valuable when the source includes a large electrode or excitation common-mode voltage. Medical-system design must still include the required isolation, protection, leakage-current controls, input protection, and applicable product-safety validation; the amplifier’s electrical specifications alone do not establish compliance for the completed medical device.

🏭

Industrial Process and Control Instrumentation

The AD624AD/+ supports industrial process instrumentation where a sensor produces a small differential voltage and the surrounding equipment introduces substantial common-mode noise. Its 130 dB minimum CMRR from DC to 1000 Hz helps reject low-frequency process interference, and the trimmed gain options simplify scaling across pressure, force, and displacement sensors. The 25 MHz bandwidth can also accommodate higher-bandwidth control or monitoring signals. In an industrial enclosure, use careful grounding and shielding around the sensor leads, isolate high-current actuator wiring from the input path, and verify the input common-mode range. Proper thermal placement of the ceramic DIP and stable supply bypassing are necessary to preserve accuracy over changing plant environments.

What is the AD624AD/+ instrumentation amplifier?
The AD624AD/+ is a single-channel, high-precision, low-noise instrumentation amplifier designed primarily for low-level transducers. According to the Analog Devices AD624 product page and manufacturer datasheet, it provides trimmed gains of 1, 100, 200, 500, and 1000 without external gain-setting components, a 25 MHz gain-bandwidth product, and a 5 V/µs slew rate. It is supplied in a 16-lead ceramic DIP package for precision bridge-sensor and data-acquisition applications.
What is the operating voltage of AD624AD/+?
The AD624AD/+ operates from 6 V to 18 V according to the Analog Devices AD624 product information and manufacturer datasheet. The device is intended for dual-supply instrumentation systems, with the exact permitted supply polarity and total supply limits confirmed in the datasheet. Its instrumentation-amplifier architecture requires adequate headroom around the input and output operating ranges, so designers should verify signal swings before selecting supply settings.
What are the key specifications of AD624AD/+ that engineers should know?
The AD624AD/+ combines a 25 MHz gain-bandwidth product, 5 V/µs slew rate, 15 µs settling time, and trimmed gains of 1, 100, 200, 500, and 1000. According to the Analog Devices AD624 product page and manufacturer datasheet, its key precision figures include 130 dB minimum CMRR from DC to 1000 Hz, 0.25 µV/°C maximum input-offset drift, and 0.001% maximum nonlinearity at gain 200. The package is a 16-lead ceramic DIP.
Where can I download the AD624AD datasheet PDF?
The official AD624 datasheet and product documentation are available from the Analog Devices product page at https://www.analog.com/en/products/ad624.html. Use the manufacturer datasheet for the definitive AD624AD ordering code, pin-description table, absolute-maximum ratings, gain-selection logic, electrical limits, and application circuit. A third-party HTML rendering may show a datasheet summary, but the Analog Devices document should control design and procurement decisions.
Where can I find the AD624AD/+ pinout?
Use the pin-description table in the Analog Devices AD624 manufacturer datasheet to assign the AD624AD/+ pins and footprint. The device is a 16-lead ceramic DIP, but no pin-specific 16-lead CDIP diagram is present in the package library used for this page. Therefore, the page does not publish an inferred pin map. Confirm signal, gain-control, supply, and ground connections directly against the manufacturer document before laying out or inspecting a board.
Can AD624AD/+ be used with a load cell or strain gauge?
Yes, the AD624AD/+ is specifically suited to load cells, strain gauges, and pressure transducers because it provides high common-mode rejection, low offset drift, and low noise. According to the Analog Devices product page and manufacturer datasheet, trimmed gains of 1 through 1000 are available without external components. In a bridge circuit, the amplifier rejects excitation-related common-mode voltage while preserving the small differential sensor output, making it suitable for precise weighing and force measurement.
What is the noise performance of AD624AD/+?
The AD624AD/+ is characterized as a low-noise instrumentation amplifier, with the manufacturer data stating 0.2 V p-p noise at 10 Hz. According to the Analog Devices AD624 documentation, this low-frequency noise behavior supports accurate transducer measurements when the bridge excitation and grounding are properly designed. Actual system noise also depends on source impedance, gain, bandwidth, resistor selection, and the noise contributed by the sensor and subsequent converter.
What is the best drop-in replacement for AD624AD/+?
AD624ADZ is the closest documented drop-in candidate because it retains the AD624 amplifier family and 16-lead ceramic DIP package. AD624BDZ and AD624CDZ are same-family temperature-grade variants that also use the 16-lead ceramic DIP outline, but their exact electrical limits and temperature ranges must be checked before substitution. The package alone is not sufficient: confirm gain behavior, supply ratings, CMRR, offset, noise, and lifecycle requirements against the original design requirements.
What can replace AD624AD/+ in an existing circuit board?
The AD624ADZ, AD624BDZ, and AD624CDZ can be considered for an AD624AD/+ replacement because they belong to the AD624 family and use the same 16-lead ceramic DIP package family. The manufacturer’s pin table and ordering information must be checked for exact lead correspondence, while the appropriate temperature grade must match the original requirement. This page treats these as drop-in-family options, not universal replacements for every AD624 ordering suffix.
AD624AD/+ vs AD624ADZ — which part should be selected?
Choose the ordering suffix that matches the required environmental grade and certification documentation rather than assuming the two codes are interchangeable in every procurement situation. The AD624AD/+ and AD624ADZ are both associated with the AD624 precision instrumentation amplifier family, and the Analog Devices AD624 documentation identifies a 16-lead ceramic DIP option. Review the manufacturer ordering table for the exact temperature range and marking of the code being substituted.
When should I choose AD624AD/+ over AD624BDZ?
Choose the AD624AD/+ when its specified temperature range, lifecycle status, and ordering identity match the operating environment and qualification plan. Select AD624BDZ instead when a higher temperature-grade version of the same 16-lead ceramic DIP family is required and the manufacturer’s comparison confirms that every electrical limit remains acceptable. The key decision is environmental capability, not merely the ability to fit the same DIP footprint.
Is AD624AD/+ suitable for high-speed data acquisition?
Yes, the AD624AD/+ is suitable for high-speed data-acquisition front ends when the signal bandwidth and settling requirements fit its amplifier dynamics. According to the Analog Devices AD624 product page and manufacturer datasheet, it offers a 25 MHz gain-bandwidth product, 5 V/µs slew rate, and 15 µs settling time. These values support faster acquisition than a low-bandwidth precision-only implementation, although the selected gain, sample rate, output range, and converter interface must be evaluated together.
How should thermal and supply bypassing be handled around AD624AD/+?
Place the required supply-decoupling capacitors close to the device’s supply and ground pins, and keep sensitive gain-control and input routing away from high-current switching paths. The AD624AD/+ operates from 6 V to 18 V, but stable operation depends on low-impedance supply return paths and correct grounding. Use the Analog Devices manufacturer datasheet for the recommended capacitor values and application schematic; do not substitute arbitrary values without checking stability and transient response.
Where to buy AD624AD/+ online and what is the lead time?
Use the Request a Quote form on this XAIPART page to request AD624AD/+ availability, current lead time, minimum order quantity, and package quantity. The manufacturer’s lifecycle and package details should be confirmed during quotation because exact stock and lead time can change. Request the ordering code AD624AD/+ explicitly so that the supplied device matches the intended temperature grade, package, and marking.
What is the price of AD624AD/+ and is it in stock?
Current AD624AD/+ pricing and stock status should be obtained through the Request a Quote form on this XAIPART page. The form lets engineers request the exact MPN, quantity, and delivery requirements without relying on a static price table. When requesting a quotation, specify the 16-lead ceramic DIP package and any required temperature-grade, marking, traceability, or inspection documentation.

داده‌های مرجع مهندسی برای AD624AD/+ — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the AD624AD/+ when the design needs a single-channel precision instrumentation amplifier for a load cell, strain gauge, or pressure transducer and requires a 16-lead ceramic DIP implementation. Its trimmed gains of 1, 100, 200, 500, and 1000 simplify gain selection, while the 25 MHz gain-bandwidth product, 5 V/µs slew rate, and 15 µs settling time provide performance beyond a slow dc-only amplifier. Select AD624ADZ when that exact documented ordering code satisfies the required grade and lifecycle plan. Consider AD624BDZ or AD624CDZ when a different AD624 temperature grade is required, but verify its temperature limits and all electrical specifications before substitution. The 130 dB minimum CMRR makes the family particularly effective where sensor excitation produces a substantial common-mode voltage. Final selection must account for the actual bridge excitation, input common-mode range, required gain, converter interface, operating temperature, and availability of the exact ordering code.

مقایسه با جایگزین‌ها

پارامتر این محصول AD624ADZ AD624BDZ AD624CDZ
Package 16-lead ceramic DIP (CDIP) 16-lead ceramic DIP (CDIP) 16-lead ceramic DIP (CDIP) 16-lead ceramic DIP (CDIP)
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Precision instrumentation amplifier Precision instrumentation amplifier AD624-family instrumentation amplifier AD624-family instrumentation amplifier
Number of Amplifiers 1 circuit 1 circuit 1 circuit 1 circuit
Temperature Grade AD grade; exact limits require confirmation AD suffix grade B suffix grade C suffix grade

تفاوت‌های کلیدی

  • Component-free trimmed gain selections (در مقابلAD624ADZ)
  • High bandwidth for precision instrumentation (در مقابلAD624BDZ)
  • Strong low-frequency common-mode rejection (در مقابلAD624CDZ)

یادداشت‌های طراحی

Route the bridge excitation and sensitive input returns separately from high-current loads and digital switching paths. Keep the AD624AD/+ input and gain-control traces short, avoid large copper areas that can increase parasitic capacitance, and place the manufacturer-recommended bypass capacitors directly at the supply pins. For a DIP implementation, use a socket only when insertion, retention, and contamination requirements permit; otherwise, soldering the device can reduce vibration-induced contact resistance.

Account for the 25 MHz gain-bandwidth product when selecting the operating gain and the bandwidth required by the acquisition chain. A 15 µs settling-time specification is not equivalent to a complete ADC acquisition time, so verify converter aperture, sample-and-hold behavior, and the required amplitude accuracy. Gain-setting transitions should also be evaluated for output movement; a data-acquisition design may need sequencing or settling time between gain changes.

Do not treat the 130 dB CMRR figure as unlimited common-mode rejection or assume that every gain setting has identical dc and ac specifications. Confirm the full manufacturer electrical table for the selected gain, input common-mode range, output swing, and supply combination. Also verify that the bridge excitation remains within the amplifier’s allowable input range; insufficient headroom can clip the signal even when the differential measurement itself is small.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer product page identifies the AD624 as a precision instrumentation amplifier, but the verified product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The '+' ordering suffix should be confirmed against the manufacturer ordering information rather than assumed to encode a specific compliance declaration.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ad624ad datasheet AD624AD/+ datasheet pdf AD624AD/+ pinout AD624AD/+ specifications AD624AD/+ gain settings AD624AD/+ noise performance AD624AD/+ load cell amplifier AD624AD/+ strain gauge circuit AD624AD/+ replacement AD624AD/+ drop-in equivalent AD624AD/+ vs AD624ADZ AD624AD/+ price AD624AD/+ stock Analog Devices AD624AD/+ AD624AD+ 16 CDIP footprint

قطعات و اصطلاحات مرتبط

Analog Devices AD624AD/+ AD624ADZ AD624BDZ AD624CDZ precision instrumentation amplifier low-noise instrumentation amplifier differential amplifier amplifier IC semiconductor load cell strain gauge pressure transducer gain-bandwidth product common-mode rejection ratio CMRR input offset voltage drift slew rate settling time pin-programmable gain 16-lead ceramic DIP CDIP surface mount industrial process instrumentation high-speed data acquisition
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ