Analog Devices

AD9841JST - 20 MSPS CCD Signal Processor | Analog Devices

MPN: AD9841JST ✗ پایان تولید
AD9841A Id 48-LQFP Package
حداقل سفارش: 1 |

AD9841JST نمای کلی

The Analog Devices AD9841JST is a 20 MSPS CCD signal processor packaged in a 48-pin LQFP measuring 7 mm by 7 mm. It belongs to the sensor and detector interface IC category, where signal-processing ICs convert analog sensor outputs into digital data for downstream acquisition, imaging, and control systems. The manufacturer has renamed the AD9841 to the AD9841A, so engineers evaluating new designs should review the current AD9841A documentation before finalizing a component specification.

A CCD signal processor is a specialized interface IC that performs the timing, control, analog-to-digital conversion, and digital-processing functions required to read charge-coupled-device outputs. Such devices reduce the number of separate components required around a CCD sensor and help synchronize pixel-data transfer with downstream digital circuitry. The AD9841JST is identified specifically as a 20 MSPS CCD signal processor, making its headline performance figure the conversion or processing rate used when designing acquisition channels.

The AD9841JST is offered in an LQFP-48 package. Its 7 mm by 7 mm footprint provides a practical surface-mount option for compact imaging boards, laboratory instruments, industrial cameras, and embedded optical systems. Because it is a legacy-specific ordering code, engineers should verify availability, lifecycle status, pin assignments, clocking requirements, and recommended operating conditions against the Analog Devices AD9841A product page and the appropriate technical documentation before releasing a production BOM.

The manufacturer’s renaming notice is an important product-lifecycle consideration. The AD9841JST identifies the original AD9841 device, while AD9841AJSTZ is the related A-version ordering code identified in distributor records. Existing equipment maintenance and industrial product programs may need the original ordering code for exact-form-fit-function continuity, whereas new designs should determine whether the renamed AD9841A family provides a supported procurement path.

AD9841-family devices are associated with CCD signal processing and are used when an imaging system requires coordinated sensor readout and digital conversion functions. Potential application areas include machine-vision cameras, semiconductor inspection equipment, scientific imaging instruments, barcode and document scanners, and other systems that digitize CCD output. Actual suitability depends on the sensor timing, analog input bandwidth, clock rate, power requirements, and digital interface configuration of the complete design.

The principal design task is to match the signal chain rather than treat the device as a generic ADC. CCD outputs, bias levels, reset timing, channel count, and required data format must be compared with the device architecture before schematic capture. PCB planning should preserve short analog paths, provide a stable clock and supply reference environment, and keep high-speed digital outputs properly terminated. Use the package pin description and application information in the manufacturer documentation when assigning every signal and power pin.

This product page combines the confirmed 20 MSPS classification, 48-LQFP package information, lifecycle-renaming context, and package-aware replacement analysis. It also identifies where a current equivalent or successor should be reviewed and provides engineering guidance for evaluating a signal-processing IC without assuming that a similar package number alone guarantees pin-to-pin compatibility.

جایگزین‌های drop-in برای AD9841JST — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

AD9841AJSTZ

✅ جایگزین مستقیم
📦 48-LQFP (7x7 mm)
A-version ordering code; listed as 10-bit versus the original AD9841 family, with 20 MSPS processing rate and pin-level compatibility requiring final datasheet confirmation

📋 جایگزین مرجع (خارج از کاتالوگ)

AD9841JST حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type CCD signal processor
Processing Rate 20 MSPS
بسته‌بندی 48-LQFP
Package Dimensions 7 mm x 7 mm
نوع نصب Surface mount
تعداد پایه 48 pins
Product Family AD9841
Current Product Name AD9841A
Interface Classification Sensor and detector interface

راهنمای پیکربندی پین AD9841JST 7 mm x 7 mm

پیکربندی پین برای AD9841JST (پکیج 7 mm x 7 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 7 mm x 7 mm برای AD9841JST

داده پین‌آوت تفصیلی موجود نیست برای AD9841JST.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

AD9841JST مناسب است برای 6 کاربردs: Machine-Vision Imaging, Scientific Imaging Instruments, Industrial Inspection Systems, Document and Barcode Scanners, Semiconductor Inspection Equipment, Legacy Imaging-System Maintenance.

📷

Machine-Vision Imaging

AD9841JST is suited to CCD-based machine-vision acquisition because it is identified as a 20 MSPS CCD signal processor in a compact 48-LQFP package. The processor can form the central interface stage between a CCD output and a digital acquisition system, reducing the need for separate timing and conversion functions when the sensor operating mode matches the device architecture. Designers should verify the camera’s channel count, clocking scheme, analog output levels, and digital data format against the manufacturer documentation. The 7 mm by 7 mm LQFP also keeps the device practical for compact camera electronics while supporting a conventional surface-mount assembly process.

🔬

Scientific Imaging Instruments

The 20 MSPS CCD signal processing capability of AD9841JST makes it relevant to scientific cameras and laboratory imaging instruments that digitize charge-coupled-device output. Integrating the sensor interface and processing function in one 48-LQFP device can simplify the control path between CCD timing, analog outputs, and downstream digital logic. Suitability depends on the required sample rate, channel configuration, output encoding, and sensor drive requirements. Instrument designers should use the manufacturer’s reference configuration and pin-description table to establish clock timing, voltage levels, decoupling, and termination before committing the analog front end to PCB layout.

🏭

Industrial Inspection Systems

AD9841JST can be evaluated for industrial inspection systems that use CCD sensors to acquire dimensional, optical, or material-analysis images. Its 20 MSPS processing rate and 48-LQFP package support a compact multi-board imaging architecture, while the CCD-specific role allows the acquisition design to be centered on a purpose-built signal processor rather than an undifferentiated converter. Before selection, engineers must confirm that the inspection sensor’s transfer function, readout timing, channel count, and noise constraints align with the device configuration. Thermal performance, clock jitter, grounding, and analog trace isolation should be addressed during prototype evaluation.

📄

Document and Barcode Scanners

AD9841JST is applicable to CCD-based document and barcode scanners when the required acquisition speed matches its 20 MSPS processing classification. The dedicated CCD signal-processor function can simplify implementation of the timing and conversion path between a linear CCD array and the scanner’s digital processing electronics. The 48-LQFP, 7 mm by 7 mm package allows placement close to the sensor interface on a compact scanner board. Design validation should cover illumination and signal-noise conditions, sensor channel configuration, supported readout modes, clocking, and the voltage and timing relationship between the CCD outputs and the processor inputs.

🔍

Semiconductor Inspection Equipment

AD9841JST can support the CCD acquisition front end of semiconductor inspection equipment where compact, coordinated sensor readout is required. The 20 MSPS CCD signal processor provides a defined starting point for designing a high-rate digitization channel, while the 48-LQFP footprint avoids an unusually large package for a complex interface function. Equipment developers should verify the CCD architecture, analog bandwidth, channel count, clocking scheme, and expected signal amplitude. Stable references, low-noise supply distribution, controlled routing, and careful separation of analog and digital paths are especially important when the instrument must resolve small optical or geometric features.

🖥️

Legacy Imaging-System Maintenance

AD9841JST is particularly relevant to maintenance and continuity programs for industrial imaging equipment already designed around the original AD9841 ordering code. Preserving the established component can reduce the risk of changing sensor timing, analog interfaces, and digital data paths in a mature machine. The manufacturer’s renaming to AD9841A makes exact lifecycle and documentation review essential, and any replacement must be checked for pin-level and electrical compatibility rather than inferred from the shared 48-LQFP package. For repair quantities, identify the equipment revision, sensor configuration, and required package condition when requesting a quotation.

خلاصه محصولات پیشنهادی

AD9841JST Analog Devices استفاده‌شده در: Machine-Vision Imaging, Scientific Imaging Instruments, Industrial Inspection Systems, Document and Barcode Scanners, Semiconductor Inspection Equipment, Legacy Imaging-System Maintenance AD9841AJSTZ A-family device to evaluate for the same CCD interface class استفاده‌شده در: Machine-Vision Imaging, Scientific Imaging Instruments, Industrial Inspection Systems, Document and Barcode Scanners, Semiconductor Inspection Equipment, Legacy Imaging-System Maintenance
What is AD9841JST used for?
AD9841JST is a 20 MSPS CCD signal processor used to coordinate the readout and digitization of charge-coupled-device outputs. Analog Devices classifies the device as a sensor and detector interface IC, and distributor records identify the 48-LQFP package as 7 mm by 7 mm. Its role is more specialized than that of a standalone ADC because the signal-processing function is designed around CCD timing and readout requirements. Confirm the sensor mode, clocking, channel count, and output format against the manufacturer documentation before using it in a new circuit.
What are the key specifications of AD9841JST?
The confirmed headline specifications are a 20 MSPS processing rate and a 48-pin LQFP package measuring 7 mm by 7 mm. Analog Devices identifies AD9841JST as a CCD signal processor in the sensor and detector interface category. Other detailed electrical characteristics should be taken from the device documentation rather than inferred from the package or its processing rate. In particular, verify resolution, supply range, analog input range, channel count, clock requirements, and temperature limits against the AD9841 or current AD9841A documentation.
Is AD9841JST the same as AD9841A?
AD9841JST is the original AD9841 ordering code, while Analog Devices states that AD9841 has been renamed AD9841A. The naming relationship does not by itself prove that every legacy ordering code is a current production equivalent. For an existing repair, preserve the original MPN and confirm pin compatibility and operating requirements. For a new design, review the AD9841A product page and its current documentation to determine availability, lifecycle status, and any functional or ordering changes.
What is the best drop-in replacement for AD9841JST?
AD9841AJSTZ is the closest identified related ordering code because it is listed as the A-version 10-bit CCD signal processor in the same 48-LQFP, 7 mm by 7 mm package class. However, a valid drop-in decision still requires comparison of pinout, clocking, analog input range, supply voltage, timing, and digital output behavior. No additional candidates could be confirmed as true pin-to-pin replacements from the available cross-reference information, so do not assume that a package match alone establishes drop-in compatibility.
Can AD9841AJSTZ replace AD9841JST?
AD9841AJSTZ is a potential replacement because both AD9841-family records identify a 48-LQFP, 7 mm by 7 mm package and both are identified as CCD signal processors. AD9841AJSTZ is specifically described as a 10-bit device, but the corresponding resolution for AD9841JST was not stated in the product listing. Confirm that resolution, pin functions, power rails, timing, and interface behavior are unchanged before treating it as a drop-in replacement rather than a board-level redesign.
When should I choose AD9841JST over AD9841AJSTZ?
Choose AD9841JST when maintaining an existing design that specifically requires the original AD9841 ordering code, especially when component traceability and form-fit-function continuity are essential. Choose the A-version family for a new design only after confirming current lifecycle and procurement support. Because AD9841 has been renamed AD9841A, new engineering work should begin with the current manufacturer documentation rather than assuming that the legacy suffix represents an actively maintained product.
Is AD9841JST suitable for CCD imaging?
AD9841JST is specifically identified as a 20 MSPS CCD signal processor, so it is directly relevant to CCD signal-chain design. Suitability for a particular camera or sensor depends on matching output timing, channel count, resolution, clock rate, input range, and power requirements. Common engineering areas include machine vision, scientific imaging, scanners, and inspection equipment. These applications should be treated as design candidates rather than guaranteed configurations until the complete sensor interface has been checked against the manufacturer documentation.
Where can I download the AD9841JST datasheet PDF?
The official product entry point for the AD9841JST is the Analog Devices AD9841 product page, which also directs engineers to the renamed AD9841A family. A separate indexed AD9841JST datasheet PDF is also listed by DiGi-Electronics. Use the official Analog Devices page as the primary source for current lifecycle and product-family information, and consult the manufacturer technical documentation for the authoritative pinout, electrical characteristics, and application guidance before releasing a design.
Where can I find the AD9841JST pinout?
The AD9841JST uses a 48-LQFP package, so its pin assignments must be taken from the manufacturer pin-description table rather than inferred from a generic package drawing. A complete numbered 48-pin map was not established for this product record, and assigning unverified names could create wiring errors in a high-speed CCD interface. Follow the Analog Devices AD9841A documentation and the corresponding legacy AD9841 material, then cross-check every power, ground, clock, analog-input, and digital-output connection against the selected ordering code.
What power and layout considerations apply to AD9841JST?
AD9841JST requires a carefully planned CCD signal-chain layout because high-speed analog and digital signals share the same 48-LQFP device. Keep analog input routing short, provide clean reference and supply connections, and route clocks and high-speed outputs away from sensitive analog nodes. Use the manufacturer’s recommended decoupling and grounding arrangement rather than estimating values from generic guidance. The exact supply voltage, pin states, and capacitor requirements should be confirmed from the official technical documentation before PCB release.
What package does AD9841JST use?
AD9841JST is supplied in a 48-LQFP package measuring 7 mm by 7 mm. The package information appears in the product records for AD9841JST and the related AD9841AJSTZ, which supports a footprint-level comparison between the two ordering codes. Package equivalence alone does not prove electrical or pin compatibility, so verify the complete pin-description table, exposed or thermal features if any, assembly constraints, and recommended land pattern before substituting one part for the other.
How does AD9841JST compare with AD9841AJSTZ?
AD9841JST is the original AD9841 device and is identified as a 20 MSPS CCD signal processor in a 48-LQFP package. AD9841AJSTZ is the A-version ordering code and is listed as a 10-bit CCD signal processor in a 48-LQFP package. The available information confirms the shared package class but does not establish identical pinout, supply requirements, or timing behavior. Use AD9841AJSTZ as a candidate successor only after a complete AD9841-versus-AD9841A technical comparison.
Where can I buy AD9841JST?
AD9841JST can be requested through the Request a Quote form on this page, where the requested quantity, packaging, date code, and target delivery requirements can be confirmed. Because Analog Devices has renamed AD9841 to AD9841A and the target is an original ordering code, procurement should verify lifecycle status before committing to a production schedule. A quotation request is also appropriate when the required quantity is small or a specific reel, tray, or legacy supply condition must be documented.
What is the price of AD9841JST?
Use the Request a Quote form on this page for current AD9841JST pricing, minimum order quantity, stock, and delivery information. Pricing for an original ordering code can vary with quantity, date code, packaging, and remaining lifecycle inventory, so a static figure should not be treated as a quotation. Include the target assembly volume and required inspection or traceability conditions in the request to obtain an actionable commercial response.
What is the lead time for AD9841JST?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. AD9841JST is an original AD9841 ordering code after the manufacturer renamed the family to AD9841A, so production availability may differ from that of the current family. A reliable schedule requires confirmation of stock, package condition, date code, and traceability requirements. State your required delivery date and forecast quantity in the request rather than relying on a generic stock estimate.
Is AD9841JST in stock?
AD9841JST stock should be confirmed through the Request a Quote form on this page for the exact quantity and packaging condition required. The existence of distributor listings does not establish current stock, and an original ordering code may have a different supply profile from the renamed AD9841A family. Provide your forecast and acceptable date-code window in the request. For production continuity, ask for confirmation that the offered material matches the original AD9841JST ordering code.

داده‌های مرجع مهندسی برای AD9841JST — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose AD9841JST when maintaining an existing CCD-based system that specifically uses the original AD9841 ordering code, particularly when preserving the approved schematic, sensor timing, and qualification history is more important than moving to the renamed product family. AD9841AJSTZ is the leading candidate for a future redesign because it is an Analog Devices A-version device in the same 48-LQFP class, but it should not be called a drop-in replacement until its pinout, resolution, supply range, clocking, timing, and interface behavior have been compared with the original part. For new CCD imaging products, begin with the current AD9841A family documentation and procurement status rather than assuming that the legacy AD9841JST remains the preferred lifecycle solution. The strongest selection criterion is complete signal-chain compatibility, not merely the shared package outline.

مقایسه با جایگزین‌ها

پارامتر این محصول AD9841AJSTZ
Brand Analog Devices Analog Devices
Package 48-LQFP (7x7 mm) 48-LQFP (7x7 mm)
Product Type CCD signal processor CCD signal processor
Product Family AD9841 AD9841A
Interface Classification Sensor and detector interface Sensor and detector interface
Pin Count 48 pins 48 pins
Mounting Type Surface mount Surface mount
Lifecycle Context Original AD9841 ordering code; family renamed AD9841A AD9841A family ordering code

تفاوت‌های کلیدی

  • Original ordering code for AD9841-family continuity (در مقابلAD9841AJSTZ)
  • Confirmed processing-rate classification (در مقابلAD9841AJSTZ)
  • Same package class supports footprint review (در مقابلAD9841AJSTZ)

یادداشت‌های طراحی

Keep CCD analog outputs, the associated input pins, and required support components close to AD9841JST to minimize trace pickup and propagation delay. Route high-speed clock and digital output nets away from sensitive analog nodes, and use the manufacturer’s reference layout to establish return paths and grounding. Do not infer analog pin locations from the physical 48-LQFP outline; assign every connection from the pin-description table because package continuity does not prove functional pin compatibility.

Follow the manufacturer’s recommended supply topology, reference arrangement, and decoupling values for AD9841JST. A CCD interface can contain noise-sensitive bias and analog signals, so supply distribution should avoid carrying clock or digital-return current through the analog reference path. Confirm the exact voltage rails, permissible sequencing, and capacitor characteristics in the official documentation before schematic release. The 48-LQFP package also requires attention to thermal pad and copper design where the selected package implementation requires them.

Evaluate clock jitter, channel skew, analog settling, and digital output timing as one complete acquisition chain. Match the CCD drive and readout timing to the device’s supported sensor modes, and use controlled-impedance routing and appropriate termination where the manufacturer interface guidance calls for them. Probe the assembled board at the relevant pins rather than relying only on source-end measurements. This is especially important when the 20 MSPS operating target is approached with multiple simultaneous data or control transitions.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for the exact ordering code. AEC-Q100 is marked not applicable because this is an interface signal processor rather than an automotive-qualified power device.

جستجوهای مرتبط

AD9841JST datasheet AD9841JST pinout AD9841JST datasheet pdf AD9841JST replacement AD9841JST equivalent AD9841JST cross reference AD9841JST footprint AD9841JST price AD9841JST stock Analog Devices AD9841JST AD9841JST 20 MSPS AD9841JST 48-LQFP AD9841JST CCD signal processor AD9841JST vs AD9841AJSTZ AD9841JST application circuit

قطعات و اصطلاحات مرتبط

Analog Devices AD9841JST AD9841AJSTZ AD9841 AD9841A CCD signal processor sensor and detector interface IC interface IC semiconductor 20 MSPS 48-LQFP LQFP package family surface-mount technology CCD analog-to-digital conversion machine vision scientific imaging industrial inspection document scanning semiconductor inspection signal integrity clock jitter power decoupling RoHS REACH
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ