Analog Devices

ADM4850ARZ - 5V RS-485 Transceiver | Analog Devices

MPN: ADM4850ARZ ✓ فعال
5 V Vdss EIA RS-485 and RS-422 Rds(on) 8-pin SOIC Package
حداقل سفارش: 1 |

ADM4850ARZ نمای کلی

The Analog Devices ADM4850ARZ is a 5 V, slew-rate-limited differential line transceiver for RS-485 and RS-422 data communication in an 8-pin SOIC package. The device supports half-duplex operation at up to 115 kbps, integrates a transmitter and receiver, and is intended for balanced multipoint bus transmission lines. Its slew-rate control limits the transition rate to reduce unwanted radio-frequency energy on long multipoint networks.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level digital signals into balanced differential signals for reliable communication over cables and multidrop buses. The differential signal architecture belongs to the broader interface IC hierarchy and supports noise-resistant industrial communication. The ADM4850 family also includes related half-duplex and full-duplex differential line transceivers designed for high-speed multipoint data links.

The ADM4850ARZ operates from a 5 V supply and is identified as a single-channel, half-duplex RS-422/RS-485 transceiver. Slew-rate limitation is the central feature for practical bus deployments because it reduces edge energy that can propagate as electromagnetic interference. The 115 kbps operating rate supports conventional industrial-control traffic where robust signaling and reduced EMI are more important than very high data throughput.

The device combines a differential line driver with a differential receiver so that a node can transmit and receive on the same bus pair. Communication direction is normally managed by an external control signal or host interface. In a multidrop network, multiple nodes can share the bus when only one transmitter is active at a time; bus contention remains a system-level concern that must be prevented by the controller and driver-enable logic.

Typical uses include industrial sensor networks, building automation equipment, factory data buses, process-control links, and embedded serial interfaces. The part is also appropriate for laboratory or instrumentation systems that require balanced differential signaling over cables longer or noisier than an ordinary point-to-point logic connection. Applications requiring full-duplex operation should instead select a suitable full-duplex member of the ADM485 family.

PCB implementation should preserve the differential route between the transceiver and the connector, minimize stub lengths, and provide a controlled return path for the common-mode reference. External termination, biasing, and protection components must be selected from the cable length, topology, and baud rate rather than copied blindly between unrelated designs.

This product page combines the manufacturer device information, distributor identification, package details, interface standards, and drop-in replacement information. It also adds application-focused engineering guidance and a parameter comparison intended to make PCB reuse and transceiver selection more explicit than a basic catalog listing.

جایگزین‌های drop-in برای ADM4850ARZ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ADM4850ARZ (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type, Maximum Data Rate, Slew Rate, Duplex Mode.

Analog Devices
Package: 8-lead SOIC, 3.90 mm width
Product Type: Low-power differential line transceiver
Slew Rate: Limited for low EMI
مقایسه با ADM4850ARZ →
Analog Devices
Package: 8-lead SOIC
Product Type: RS-485/RS-422 differential line transceiver
Maximum Data Rate: 500 kbps
مقایسه با ADM4850ARZ →
Analog Devices
Product Type: RS-485/RS-422 differential line transceiver
Maximum Data Rate: 5 Mbits/s
مقایسه با ADM4850ARZ →
Analog Devices
Maximum Data Rate: 250 kbps
مقایسه با ADM4850ARZ →
Analog Devices
Package: 14-pin SOIC, 3.90 mm width
Product Type: Full-duplex differential line transceiver
Slew Rate: Slew-rate limited
مقایسه با ADM4850ARZ →

ADM4851AR

✅ جایگزین مستقیم
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 differential line transceiver · 5 V · 500 kbps · Half-duplex · EIA RS-485 and EIA RS-422 compliant · True fail-safe receiver · Reduced slew rate for low EMI · Multipoint bus transmission line

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADM4855AR

✅ جایگزین مستقیم
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 differential line transceiver · 5 V · 500 kbps · Half-duplex and full-duplex family options · Multipoint bus transmission lines · Balanced differential data transmission · EIA RS-485 and RS-422 compliant · Reduced slew rate for low EMI

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADM489AR

✅ جایگزین مستقیم
Analog Devices
📦 8-pin SOIC
Full-duplex differential line transceiver · EIA RS-485 and RS-422 · 250 kbps · 4.5 V to 5.5 V · -12 V to +12 V · 12 kΩ · 2 kV · IEC 1000-4-4

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADM4850ARZ مشخصات

Product Type Differential line transceiver
Supported Standards EIA RS-485 and RS-422
ولتاژ تغذیه 5 V
Maximum Data Rate 115 kbps
Duplex Mode Half-duplex
Signal Type Balanced differential
Bus Architecture Multipoint bus
Slew Rate Limited
Transmitter Count 1
Receiver Count 1
بسته‌بندی 8-pin SOIC
نوع نصب Surface mount
Tube Quantity 1 unit per tube
Reel Packaging ADM4850ARZ-REEL7
Datasheet Revision Rev. F

راهنمای پیکربندی پین ADM4850ARZ 8-pin soic

پیکربندی پین برای ADM4850ARZ (پکیج 8-pin soic). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 8-pin soic برای ADM4850ARZ

داده پین‌آوت تفصیلی موجود نیست برای ADM4850ARZ.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ADM4850ARZ مناسب است برای 6 کاربردs: Industrial Sensor Bus, Building Automation Network, Process-Control Equipment, Factory Data Acquisition, Instrumentation and Test Equipment, Telecom Power and Monitoring.

🏭

Industrial Sensor Bus

The ADM4850ARZ fits industrial sensor and actuator networks that use balanced RS-485 signaling over extended cables. Its 115 kbps maximum rate is appropriate for moderate-rate telemetry, while slew-rate limitation reduces the high-frequency edge energy that can interfere with nearby equipment. The 5 V half-duplex transceiver supports a shared differential pair when only one node transmits at a time. Designers should implement direction control in the host controller, minimize cable stubs, and apply termination and protection according to the bus topology.

🏭

Building Automation Network

The ADM4850ARZ is suitable for building-automation controllers, room modules, and HVAC interface boards that distribute control commands over an RS-485 network. Its 115 kbps rate supports ordinary supervisory-control traffic without requiring a high-speed serial interface, and the slew-rate-limited driver helps reduce cable EMI in environments containing numerous control cables. Use a single active transmitter at a time and terminate only the physical ends of the bus. Surge protection and proper common-mode grounding are important when control lines pass between buildings or electrically separated equipment.

⚡

Process-Control Equipment

The ADM4850ARZ can connect sensors, remote I/O, and control equipment to a process-control master through an RS-485 or RS-422 link. The half-duplex 115 kbps operation provides a practical balance between update rate, cable reach, and reduced electromagnetic emissions. Because the bus can represent a multipoint network, software and hardware should prevent simultaneous transmission, provide failsafe biasing where required, and use controlled termination. The differential interface also helps reject common-mode noise encountered near motors, contactors, and switching power equipment.

🖥️

Factory Data Acquisition

The ADM4850ARZ is appropriate for factory data-acquisition nodes that collect measurements from distributed instruments over a wired bus. Its 5 V operation fits embedded controller boards, while the 115 kbps rate accommodates routine status and measurement traffic. The balanced line reduces susceptibility to differential noise compared with a single-ended interface, and slew-rate control limits harmful fast-edge energy. Layout should keep the differential pair continuous from the transceiver to the connector, avoid unnecessary test pads that create stubs, and separate the bus routing from switching-power paths.

🔧

Instrumentation and Test Equipment

The ADM4850ARZ can connect laboratory instruments, automated test fixtures, and service equipment over a balanced RS-485 or RS-422 link. The 115 kbps half-duplex rate is suitable for command and response traffic, while slew-rate limitation makes the interface practical where long test leads could otherwise radiate significant EMI. Keep the differential trace geometry consistent and provide a stable reference near the connector. External protection may be needed when leads connect to externally accessible equipment, and direction control should be deterministic to avoid bus contention during repeated automated test cycles.

🌐

Telecom Power and Monitoring

The ADM4850ARZ can be used in remote monitoring units, battery-powered field equipment, and telecom support modules that need a robust wired supervisory channel. The 5 V half-duplex interface operates at up to 115 kbps, allowing status and configuration data to share a multidrop RS-485 bus. Its differential signaling is well suited to installations with electrically noisy power systems, while controlled transition rates limit cable emissions. The completed design still needs careful grounding, surge protection, and bus-termination calculations based on cable length, propagation delay, and the number of connected nodes.

What is the ADM4850ARZ?
The ADM4850ARZ is a 5 V, half-duplex differential line transceiver for RS-485 and RS-422 communication. According to the Analog Devices ADM4850 Data Sheet, Revision F, the device is designed for high-speed half-duplex data communication over multipoint bus transmission lines. The exact ADM4850ARZ orderable configuration is supplied in an 8-pin SOIC package.
What is the maximum data rate of the ADM4850ARZ?
The ADM4850ARZ supports data rates up to 115 kbps in its half-duplex configuration. This figure is listed for the exact device on Mouser and is consistent with the Analog Devices description of the ADM4850 as a slew-rate-limited RS-485/RS-422 line transceiver. The rate makes the part suitable for conventional industrial-control and multidrop serial buses.
Where can I download the ADM4850ARZ datasheet PDF?
The official ADM4850ARZ datasheet is available through the Analog Devices ADM4850 product page at analog.com, which links to Data Sheet Revision F. The product page also provides device documentation and selection information. Use the manufacturer document for the authoritative pin descriptions, timing characteristics, electrical limits, and application guidance.
Where can I find the ADM4850ARZ pinout?
The ADM4850ARZ uses an 8-pin SOIC package, and its exact pin assignment is defined in the Analog Devices ADM4850 Data Sheet, Revision F. Use the pin-description table and package drawing in that manufacturer document when assigning traces. The catalog snippets identify the package and device functions but do not reproduce a complete, authoritative pin list, so the PDF is the correct source for PCB implementation.
What RS-485 and RS-422 functions does the ADM4850ARZ provide?
The ADM4850ARZ combines a differential transmitter and differential receiver in one 5 V device designed for balanced RS-485 and RS-422 links. According to the Analog Devices ADM4850 product information, it is suitable for half-duplex and full-duplex family implementations, while the ADM4850ARZ itself is identified as a half-duplex transceiver. Direction control must be managed by the host or external enable logic.
Why is slew-rate limitation important for an RS-485 bus?
Slew-rate limitation reduces the speed of differential-driver edge transitions, which helps limit high-frequency energy and electromagnetic interference on long cables. The ADM4850ARZ is explicitly described as slew-rate limited and supports operation up to 115 kbps. This makes it especially useful for industrial multipoint buses where reducing radiated noise is more valuable than maximizing data throughput.
What is the difference between ADM4850ARZ and ADM4851AR?
The ADM4850ARZ is the half-duplex 5 V member of the Analog Devices ADM485 family, while ADM4851AR is a related family member with different duplex and configuration details. Both products appear in manufacturer family documentation and cross-reference results. Confirm the exact driver-enable and receiver-output pin assignments in the relevant datasheet before treating either part as a board-level substitute.
ADM4850ARZ vs ADM4855AR: which one should be selected?
ADM4850ARZ is the 5 V, 115 kbps, half-duplex member, whereas ADM4855AR is a related Analog Devices transceiver with a different configuration in the ADM485 family. The comparison should focus on supply arrangement, duplex mode, enable behavior, data rate, and pin-level operating differences. The ADM4855AR should be selected only after its manufacturer datasheet confirms compatibility with the intended PCB and bus architecture.
When should I choose ADM4850ARZ instead of ADM4851AR?
Choose ADM4850ARZ when the design needs a 5 V, half-duplex RS-485/RS-422 node operating at up to 115 kbps and sharing one differential pair for communication. Choose ADM4851AR when the system instead requires the behavior and pin configuration of that family variant, particularly a full-duplex implementation. The decision must include both bus topology and a complete pin-function review, not only matching the 8-pin package.
Is ADM4850ARZ suitable for industrial multipoint networks?
The ADM4850ARZ is suitable for 5 V RS-485/RS-422 multipoint communication where low EMI, balanced signaling, and a 115 kbps data rate are appropriate. The Analog Devices ADM4850 Data Sheet, Revision F, identifies multipoint bus transmission lines as an intended application. Industrial suitability still depends on environmental ratings, surge protection, isolation, grounding, and connector requirements for the completed equipment.
What is the best drop-in replacement for ADM4850ARZ?
The closest board-level replacement is one that matches the 8-pin SOIC footprint, 5 V operation, half-duplex RS-485/RS-422 function, enable behavior, and key electrical limits. ADM4851AR, ADM4855AR, and ADM489AR appear in Analog Devices family or comparison references, but their individual pin and parameter differences must be checked before substitution. The ADM4850ARZ-REEL7 entry is a packaging option, not an engineering alternative.
Can ADM4851AR replace ADM4850ARZ on the same PCB?
ADM4851AR cannot be assumed to be a pin-for-pin replacement for ADM4850ARZ solely because both are 8-pin SOIC devices. The ADM4850ARZ is a 115 kbps half-duplex part, while ADM4851AR has a different configuration within the ADM485 family. Review the driver-enable pins, receiver outputs, supply pins, and bus connections in both manufacturer datasheets before approving a replacement.
What can replace the ADM4850ARZ in an RS-485 design?
A valid replacement must be a true drop-in device with the same 8-pin SOIC land pattern, 5 V supply, half-duplex enable interface, RS-485/RS-422 electrical behavior, and compatible key timing. ADM4855AR and ADM489AR are relevant Analog Devices comparison candidates, while ADM4851AR represents another family configuration. Verify the exact pin map and specifications rather than relying on package shape or family membership alone.
Is ADM4850ARZ the same as ADM4855AR?
No, ADM4850ARZ and ADM4855AR are not the same orderable device. ADM4850ARZ is identified as a 5 V, 115 kbps, half-duplex RS-485/RS-422 transceiver in an 8-pin SOIC, while ADM4855AR is a different member of the Analog Devices ADM485 family. Their configuration and electrical details differ, so substitution requires checking the ADM4855AR datasheet against the complete ADM4850ARZ circuit.
What are the key specifications of ADM4850ARZ that engineers should know?
The ADM4850ARZ combines a 5 V supply, half-duplex operation, up to 115 kbps data rate, RS-485/RS-422 support, slew-rate limiting, balanced differential signaling, and an 8-pin SOIC package. These characteristics place it in the differential line transceiver category for balanced multipoint buses. The Analog Devices ADM4850 Data Sheet, Revision F, remains the authoritative source for timing, limits, and pin assignments.
Where can I request a quote and current lead time for ADM4850ARZ?
Use the Request a Quote form on this page to request current ADM4850ARZ pricing, stock, minimum order quantity, and production lead time. Commercial terms can change with order volume, package configuration, and supply status, so a current quotation is more reliable than a static catalog figure. The device is also available under the ADM4850ARZ-REEL7 packaging designation when reeled handling is required.

داده‌های مرجع مهندسی برای ADM4850ARZ — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ADM4850ARZ when the board requires a 5 V, half-duplex RS-485/RS-422 interface operating at up to 115 kbps and implemented in an 8-pin SOIC land pattern. Its slew-rate-limited output is particularly useful on industrial multipoint buses where reducing high-frequency cable emissions matters. Consider ADM4851AR when the system needs the different configuration and pin behavior of that family member, especially for a full-duplex arrangement. Evaluate ADM4855AR when its distinct supply or configuration characteristics better match the design, and consider ADM489AR when a different data-rate and drive profile is required. In every case, compare the complete pin map, electrical limits, enable logic, and bus topology rather than relying on the shared SOIC package alone.

مقایسه با جایگزین‌ها

پارامتر این محصول ADM4851AR ADM4855AR ADM489AR
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Product Family ADM485 ADM485 ADM485 ADM489

تفاوت‌های کلیدی

  • Established 115 kbps half-duplex operating point (در مقابلADM489AR)
  • Slew-rate-limited differential output (در مقابلADM4851AR)
  • Single 5 V operating architecture (در مقابلADM4855AR)

یادداشت‌های طراحی

Route the differential bus as a continuous pair from the ADM4850ARZ to the connector, with consistent spacing and a continuous reference plane. Avoid branch stubs because their reflections can degrade the 115 kbps signal. Place any protection components close to the connector and keep their return path to the transceiver ground low-inductance.

Do not enable more than one transmitter on a shared RS-485 bus at the same time. Bus contention can produce excessive current and unreliable communication. Use a defined direction-control signal, disable the driver promptly after transmission, and confirm failsafe behavior for the receiver when the bus is idle or disconnected.

Retain the ADM4850's slew-rate-limited drive characteristics because the 115 kbps operating rate is specifically suited to reducing fast-edge emissions on multipoint cables. Do not substitute a much faster edge-rate driver without re-evaluating EMI, reflections, and termination. Keep switching converters and high-current return paths away from the differential route and connector ground path.

Calculate termination and biasing for the completed network rather than applying them by default. Place termination at the physical ends of the bus, avoid duplicating termination at every node, and provide failsafe bias only once where appropriate. Account for connector stubs, cable type, node count, and propagation delay at the selected 115 kbps operating rate.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The verified device information identifies EIA RS-485 and RS-422 compliance but does not provide explicit RoHS, REACH, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable to this general-purpose interface IC.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

adm4850arz reel7 ADM4850ARZ datasheet ADM4850ARZ datasheet pdf ADM4850ARZ pinout Analog Devices ADM4850ARZ ADM4850ARZ 8-SOIC ADM4850ARZ 115 kbps ADM4850ARZ RS-485 transceiver ADM4850ARZ equivalent ADM4850ARZ replacement ADM4850ARZ vs ADM4851AR ADM4850ARZ vs ADM4855AR ADM4850ARZ industrial bus ADM4850ARZ price ADM4850ARZ stock

قطعات و اصطلاحات مرتبط

Analog Devices ADM4850ARZ ADM4850ARZ-REEL7 ADM4851AR ADM4855AR ADM489AR differential line transceiver RS-485 RS-422 EIA standards half-duplex communication balanced differential signaling slew-rate-limited transmitter multipoint bus 115 kbps 5 V transceiver 8-pin SOIC SOIC family surface-mount package interface IC industrial automation process control factory data acquisition electromagnetic interference common-mode rejection
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ