Texas Instruments

ADS7804PB - 12-Bit 100 kSPS SAR ADC | Texas Instruments

MPN: ADS7804PB ✓ فعال
5 V Vdss 28-pin PDIP Package Yes Speed
حداقل سفارش: 1 |

ADS7804PB نمای کلی

The Texas Instruments ADS7804PB is a 12-bit, single-input, successive-approximation analog-to-digital converter with a 100 kSPS sampling rate and a 28-pin PDIP package. It is designed for applications requiring accurate conversion of single-ended analog signals while operating from a 5 V supply. The converter uses a capacitor-based SAR architecture with an integrated sample-and-hold circuit, internal reference, clock, microprocessor-compatible interface, and three-state output drivers. The device provides an 8 microsecond conversion time and is specified for an industrial temperature range of -40 °C to +85 °C.

An ADC is an interface component that converts a continuously varying analog voltage into a numeric value for processing, measurement, or control. The ADS7804PB belongs to the SAR ADC family, where a comparator and internal capacitor array determine the digital result one bit at a time. This architecture is appropriate for low-to-medium sampling rates and typically provides predictable conversion timing, straightforward digital control, and good suitability for industrial measurement systems.

The ADS7804PB offers 12-bit resolution, a 0.1 MHz sample rate, and 0.011% endpoint error according to the manufacturer-related technical listing. Its 2's complement binary output format allows direct connection to suitable microprocessor or digital bus circuitry. The operating voltage is 5 V, while the specified operating temperature range is -40 °C to +85 °C. The parallel output architecture requires the host processor to capture the digital result and can require careful bus timing analysis when the converter is used with high-speed peripherals.

The device includes an internal reference and clock, reducing the number of external timing and reference components required in a basic circuit. It also includes three-state output drivers, allowing multiple devices to share parallel bus lines when the system design uses appropriate addressing and enable control. Offset and full-scale calibration procedures are described in the manufacturer datasheet, including fixed-resistor test conditions and internal adjustment methods.

Typical applications include industrial process monitoring, instrumentation, data acquisition, embedded measurement systems, and digital control panels. The 100 kSPS sampling rate is useful for signals requiring regular periodic sampling rather than high-frequency waveform capture. The 28-pin PDIP package favors through-hole construction and prototype or legacy industrial boards where a surface-mount land pattern is not required.

Designers should verify the analog input range, reference accuracy, acquisition timing, output enable behavior, and digital interface timing against the manufacturer datasheet before placing the converter in a new design. Decoupling should follow the datasheet recommendations, and the analog input should be routed away from high-current switching nodes. This page combines the available manufacturer specifications, package information, application guidance, and replacement considerations for engineering selection.

جایگزین‌های drop-in برای ADS7804PB — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ADS7804PB (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Architecture, Package, Sampling Rate, Supply Voltage.

Texas Instruments
Architecture: SAR (Successive Approximation)
Package: 28-DIP (0.300 inch, 7.62 mm)
Sampling Rate: 40 kSPS
مقایسه با ADS7804PB →

ADS7804UB

✅ جایگزین مستقیم
📦 PDIP-28
ADS7804UB is a comparison candidate with the same 12-bit, 100 kSPS ADS7804 family; suffix-specific package and ordering details require verification

📋 جایگزین مرجع (خارج از کاتالوگ)

ADS8504IBDW

✅ جایگزین مستقیم
📦 PDIP-28
ADS8504IBDW is a 28-pin comparison candidate with a comparable 12-bit SAR ADC architecture; 100 kSPS target rate and exact pin compatibility must be verified

📋 جایگزین مرجع (خارج از کاتالوگ)

ADS7804PB حداکثر مقادیر مجاز و مشخصات الکتریکی

رزولوشن 12 bits
نرخ نمونه‌برداری 100 kSPS
Conversion Time 8 us
ولتاژ تغذیه 5 V
Input Channel Count 1 channel
Architecture Successive-approximation SAR
Output Format 2's complement binary
Output Interface Parallel microprocessor-compatible interface
محدوده دمای کاری -40 °C to +85 °C
Endpoint Error 0.011%
بسته‌بندی 28-pin PDIP
نوع نصب Through-hole
Number of Terminals 28
Integrated Reference Yes
Integrated Clock Yes
Sample-and-Hold Circuit Integrated
Output Driver Type Three-state output drivers
Temperature Grade Industrial
Technology CMOS

راهنمای پیکربندی پین ADS7804PB 28-pin pdip

پیکربندی پین برای ADS7804PB (پکیج 28-pin pdip). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 28-pin pdip برای ADS7804PB

داده پین‌آوت تفصیلی موجود نیست برای ADS7804PB.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ADS7804PB مناسب است برای 6 کاربردs: Industrial Process Monitoring, Data Acquisition Systems, Digital Panel Meters, Embedded Control and Instrumentation, Test and Measurement Equipment, Power and Battery Monitoring.

🏭

Industrial Process Monitoring

The ADS7804PB fits industrial process-monitoring systems that periodically measure a single analog pressure, temperature, or level signal. Its 12-bit resolution provides 4,096 digital codes, while the 100 kSPS sampling rate is more than adequate for many slow-changing process variables. Place the converter behind the appropriate sensor-conditioning network, use the manufacturer-specified reference and decoupling arrangement, and route the parallel output to a host processor or bus interface. The 28-pin PDIP package also simplifies assembly on through-hole industrial controller boards. Designers should confirm the allowable analog input range, acquisition interval, and calibration method in the Texas Instruments ADS7804 datasheet before finalizing the signal chain.

📟

Data Acquisition Systems

The ADS7804PB is suitable for moderate-speed data-acquisition front ends that digitize one analog channel for storage or real-time analysis. At 12 bits and 100 kSPS, it provides a practical balance between measurement resolution, conversion speed, and interface simplicity. The capacitor-based SAR conversion uses an integrated sample-and-hold stage, while the internal reference and clock reduce external component count. For a complete acquisition card, decouple the 5 V supply as specified, isolate the analog input from digital switching paths, and implement the host handshake around the three-state parallel outputs. If the system needs simultaneous channels, higher resolution, or a serial interface, use a different converter architecture rather than expanding beyond the ADS7804PB's single-channel design.

📺

Digital Panel Meters

The ADS7804PB can serve as the analog measurement element in a digital panel meter for industrial displays. A 12-bit converter is appropriate when the instrument must show a stable numerical value rather than capture a fast transient, and the 100 kSPS rate allows frequent refresh with averaging or filtering. The microprocessor-compatible parallel interface can feed a controller that performs scaling, calibration, and display formatting. Keep sensitive analog traces away from display-driver and switching-supply nodes, provide the recommended reference and bypass capacitors, and account for the ADC input acquisition interval in the measurement timing. The through-hole PDIP format is especially convenient for panel-meter boards assembled with conventional through-hole components.

🔧

Embedded Control and Instrumentation

The ADS7804PB fits embedded instrumentation that periodically evaluates an analog feedback signal for a control loop. Its 8 microsecond conversion time and 100 kSPS maximum sampling rate support timely updates, while 12-bit resolution can represent control variables with adequate granularity. The parallel output supports direct connection to suitable microprocessor input circuitry, and three-state drivers permit controlled bus sharing where the system architecture supports it. In a control application, define the complete signal scaling, offset, and gain-calibration procedure, and use software filtering or hardware averaging when the measured signal contains noise. Check the analog input range and operating temperature limits against the manufacturer datasheet before assigning the converter to safety-critical or precision control functions.

🖥️

Test and Measurement Equipment

The ADS7804PB is appropriate for compact test and measurement equipment that converts a calibrated input into a digital result. Its 12-bit resolution, industrial temperature range, and single-sample SAR operation make it suitable for bench instruments and production test fixtures that do not require simultaneous sampling. The internal reference and clock support a straightforward analog front end, while the parallel output can feed a controller for calibration, limits checking, and result logging. Use the datasheet's offset and full-scale calibration procedure with the specified fixed resistors to establish repeatable measurements. Protect the analog input from external transients, maintain the specified supply bypassing, and verify the exact acquisition timing when testing rapidly changing signals.

⚡

Power and Battery Monitoring

The ADS7804PB can digitize a scaled voltage from a power supply, battery pack, or energy-storage system when the application requires a basic measurement of one analog rail. The 5 V supply operation is convenient for conventional control electronics, and the 100 kSPS rate can capture current and voltage trends during load transitions. Place the converter on the measurement side of the power system with input filtering, limiting, and scaling designed for its absolute input range. The three-state parallel outputs allow bus sharing where the host design includes appropriate output-enable control. This use should not replace a dedicated battery-management IC when accurate coulomb counting, protection, or cell balancing is required; the ADS7804PB is best used for supervisory measurement and diagnostics.

خلاصه محصولات پیشنهادی

ADS7804PB Texas Instruments استفاده‌شده در: Industrial Process Monitoring, Data Acquisition Systems, Digital Panel Meters, Embedded Control and Instrumentation, Test and Measurement Equipment, Power and Battery Monitoring ADS7804UB ADS7804 family comparison candidate استفاده‌شده در: Industrial Process Monitoring, Digital Panel Meters, Test and Measurement Equipment ADS8504IBDW Parallel-output SAR ADC comparison candidate استفاده‌شده در: Data Acquisition Systems, Embedded Control and Instrumentation, Power and Battery Monitoring
What is the ADS7804PB used for?
The ADS7804PB is a 12-bit, 100 kSPS SAR analog-to-digital converter for converting a single analog input into a digital measurement. According to the Texas Instruments ADS7804 datasheet, it includes a sample-and-hold circuit, internal reference, clock, microprocessor-compatible interface, and three-state output drivers. It is suited to industrial instrumentation, process monitoring, data acquisition, and embedded control systems.
What is the sampling rate of ADS7804PB?
The ADS7804PB has a 100 kSPS sampling rate, also described as a 0.1 MHz sample rate in the technical listing. The manufacturer ADS7804 datasheet identifies a maximum conversion time of 8 microseconds for this 12-bit SAR converter. Use the sampling rate to determine whether the input bandwidth and required measurement latency fit the intended signal.
What is the resolution of ADS7804PB?
The ADS7804PB provides 12-bit resolution, producing 4,096 digital codes for a full conversion range. The listed endpoint error is 0.011%, and the output uses a 2's complement binary format. According to the Texas Instruments ADS7804 datasheet, the converter is a capacitor-based SAR ADC with an integrated sample-and-hold circuit and internal reference.
What is the supply voltage of ADS7804PB?
The ADS7804PB operates from a 5 V supply. The Partstack technical listing identifies the same 5 V operating condition and an operating temperature range of -40 °C to +85 °C. The manufacturer datasheet should be used for the complete absolute maximum ratings, decoupling requirements, reference accuracy, and analog input limits.
Where can I find the ADS7804PB datasheet PDF?
The official ADS7804PB datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads7804.pdf. The document covers the 12-bit, 10 microsecond sampling CMOS analog-to-digital converter, including the SAR architecture, calibration method, electrical characteristics, and application information.
What package does ADS7804PB use?
The ADS7804PB uses a 28-pin PDIP package with through-hole terminals. Distributor and technical listings identify a rectangular DIP package with 28 terminals. The matching package diagram key is dip-28, and the device is intended for through-hole PCB layouts rather than a surface-mount land pattern.
Where can I find the ADS7804PB pinout?
The ADS7804PB pin assignment is shown in the pin-configuration section of the Texas Instruments ADS7804 datasheet. Use the package drawing and pin-description table together when assigning the 28 PDIP terminals. The device includes parallel output signals, power pins, ground pins, analog input connections, reference connections, and control signals, so correct pin identification is essential before layout release.
Is ADS7804PB suitable for industrial applications?
The ADS7804PB is suitable for many industrial measurement applications because it is specified as an industrial-temperature device from -40 °C to +85 °C. Its single 12-bit SAR channel, 100 kSPS rate, and 5 V operation fit process monitoring, panel instrumentation, and moderate-speed data-acquisition systems.
What can replace ADS7804PB?
A true drop-in replacement should use the same 28-pin PDIP footprint, provide compatible power, reference, input, control, and parallel-output signals, and remain close to the 12-bit, 100 kSPS operating limits. The available cross-reference material identifies ADS7804UB and ADS8504IBDW as comparison candidates, but their package and interface details must be checked before treating either as a direct replacement.
ADS7804PB vs ADS7804UB - which is better?
The ADS7804PB should be preferred when the PCB requires the 28-pin PDIP package and the system is specified around the PB ordering option. ADS7804UB is identified as a comparison candidate, but its package suffix and pin configuration must be confirmed against the ADS7804 datasheet before substitution. The correct choice is determined by footprint, temperature grade, interface, and electrical limits rather than by the base ADC family name alone.
When should I choose ADS7804PB over another 12-bit ADC?
Choose ADS7804PB when the design specifically needs a 28-pin PDIP, 12-bit SAR conversion, a 5 V supply, and a 100 kSPS sampling rate. It is particularly practical for through-hole industrial instrumentation where the parallel interface and three-state outputs suit the host bus. Do not choose it for high-speed waveform capture or mixed-signal designs requiring more channels, differential inputs, or a serial interface.
What are the key specifications of ADS7804PB that engineers should know?
The key ADS7804PB specifications are 12-bit resolution, one analog input, 100 kSPS conversion rate, 8 microsecond conversion time, 5 V supply, 0.011% listed endpoint error, and operation from -40 °C to +85 °C. The device is a CMOS SAR ADC in a 28-pin PDIP package with a parallel microprocessor-compatible output and three-state output drivers.
Is ADS7804PB in stock?
Current stock status can change rapidly and should be checked through the Request a Quote form on this page. The product listing identifies the ADS7804PB as a 12-bit, one-input SAR ADC in a 28-pin PDIP package. For production planning, request the current lead time, minimum order quantity, and tube or other available shipment configuration with the quote request.
How much does ADS7804PB cost?
The current unit price is not published in the available product records because no qualifying quantity-break table is present. Use the Request a Quote form on this page for current pricing, volume availability, and lead time. The structured price field is intentionally omitted from customer-facing technical explanations so that purchasing data is not presented as a fixed or stale quotation.
What is the lead time for ADS7804PB?
The current lead time should be requested through the Request a Quote form on this page because the available product records do not state a production allocation date or a fixed manufacturing lead time. When requesting a quote, identify the required quantity, tube quantity, and target delivery date so the supplier can confirm the appropriate schedule.

داده‌های مرجع مهندسی برای ADS7804PB — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ADS7804PB for a through-hole design that needs one 12-bit analog channel, a 5 V supply, and conversion capability up to 100 kSPS. Its 28-pin PDIP format, integrated reference and clock, parallel microprocessor-compatible output, and three-state drivers are useful in industrial instrumentation, data acquisition, panel meters, and supervisory power monitoring. Consider ADS7804UB first when it is confirmed to provide the same required suffix, footprint, pinout, electrical limits, and temperature grade. Treat ADS8504IBDW as a design-review candidate rather than an automatic substitution because the available records do not establish its exact sampling-rate relationship to the ADS7804PB. None of these choices is appropriate when simultaneous sampling, higher resolution, differential conversion, or a serial interface is required.

مقایسه با جایگزین‌ها

پارامتر این محصول ADS7804UB ADS8504IBDW
Package 28-pin PDIP 28-pin PDIP comparison candidate 28-pin PDIP comparison candidate
Brand Texas Instruments Texas Instruments Texas Instruments
Resolution 12 bits 12 bits 12 bits
Input Channel Count 1 channel 1 channel family rating 1 channel
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C family rating -40 °C to +85 °C
Output Interface Parallel microprocessor-compatible output Parallel family interface Parallel microprocessor interface

تفاوت‌های کلیدی

  • Matches a through-hole single-channel measurement architecture (در مقابلADS8504IBDW)
  • Uses the same 12-bit, 100 kSPS ADS7804 family performance target (در مقابلADS7804UB)
  • Combines an internal reference, clock, and sample-and-hold circuit (در مقابلADS8504IBDW)

یادداشت‌های طراحی

Follow the manufacturer datasheet for input, reference, and supply bypass-capacitor placement, and place each capacitor directly beside its associated device pin. Keep the analog input trace short and physically separated from digital output and switching-supply paths. The ADS7804PB uses a 28-pin PDIP footprint, so verify the hole pattern and pin-1 orientation on the PCB rather than assuming compatibility with a SOIC package.

Allow the full sample-and-hold acquisition interval and the specified 8 microsecond conversion time when defining the timing between input settling and digital readback. Account for the host bus setup and hold requirements of the 12-bit parallel outputs, and control the three-state output enable so adjacent devices do not contend on shared bus lines. Add digital filtering only after confirming that filtering delay is acceptable for the control loop.

Do not assume that a converter with the same base family name is automatically a drop-in substitute. Confirm the suffix-specific package, pin assignment, electrical limits, reference arrangement, output coding, and temperature grade against the manufacturer datasheet. For ADS7804UB and ADS8504IBDW, verify the complete pin list and timing behavior before revising an existing PCB.

Use the documented offset and full-scale calibration method, including the specified fixed resistors, when calibrating the measurement path. Endpoint error and resolution alone do not establish the complete accuracy of the external analog front end. Sensor excitation, reference drift, analog filtering, grounding, and PCB leakage can dominate the final measurement result and should be evaluated as part of system calibration.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No specific environmental or material-compliance declarations for ADS7804PB are identified in the available manufacturer and distributor records. The industrial temperature specification does not by itself establish AEC-Q100 qualification.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ADS7804PB datasheet ADS7804PB pinout ADS7804PB datasheet pdf ADS7804PB specifications ADS7804PB 12 bit ADC ADS7804PB 100 kSPS ADS7804PB PDIP ADS7804PB application circuit ADS7804PB equivalent ADS7804PB replacement ADS7804PB vs ADS7804UB Texas Instruments ADS7804PB ADS7804PB price ADS7804PB stock

قطعات و اصطلاحات مرتبط

Texas Instruments ADS7804PB ADS7804UB ADS8504IBDW analog-to-digital converter ADC successive-approximation ADC SAR ADC sample-and-hold circuit single-ended analog input parallel output interface three-state output driver internal reference internal clock 12-bit resolution 100 kSPS sampling rate 5 V supply 28-pin PDIP through-hole package industrial temperature range offset calibration full-scale calibration CMOS semiconductor data acquisition
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ