ADS8322Y/2K - 16-Bit 500kSPS SAR ADC | Texas Instruments
MPN: ADS8322Y/2K ✓ فعالADS8322Y/2K نمای کلی
An ADC is a data-conversion IC that transforms an analog voltage into a digital code. The ADS8322 belongs to the SAR ADC hierarchy, where a capacitor-based internal DAC successively compares a sampled input voltage with successive trial values. This architecture supports continuous conversion without the signal-processing latency associated with many delta-sigma converters, making the device suitable for measurement systems that require direct sampling and parallel digital output.
The principal features include 16-bit resolution, a maximum sampling rate of 500 kSPS, a unipolar input range, an internal 2.5 V reference, and a full 16-bit parallel interface. An 8-bit read option is also available, allowing data to be transferred in two read cycles through eight interface pins. These features balance conversion resolution and throughput in a single 32-pin TQFP package.
Internally, the ADS8322 uses a capacitor-based SAR register with an inherent sample-and-hold function. The converter can present conversion results through its complete 16-bit parallel interface or through the reduced 8-bit interface. Because the device is specified as a CMOS ADC and is offered in the industrial temperature range of -40 °C to +85 °C, it is suited to embedded industrial instrumentation where a predictable sampling rate and compact parallel interface are valuable.
Typical applications include industrial process monitoring, sensor signal acquisition, laboratory measurement equipment, factory automation, power-system instrumentation, and embedded control systems. Its 500 kSPS rate supports acquisition of rapidly changing analog quantities, while the 16-bit code width provides finer numerical resolution than conventional lower-resolution SAR converters.
PCB design should preserve the relationship between the analog input, reference circuitry, supply connections, and parallel data bus. Keep analog traces short, use a quiet ground return, and route the digital output bus away from the input node. Follow the pin-description table and recommended application circuit in the manufacturer datasheet when assigning tracks, terminating the interface, and selecting decoupling components.
This page combines the official device characteristics with a package-aware comparison, practical PCB guidance, drop-in replacement screening, and application-focused design context. It is intended to accelerate component selection while keeping every proposed replacement tied to verified package and parameter requirements.
جایگزینهای drop-in برای ADS8322Y/2K — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ADS8322Y/2K (همان فرمفاکتور و فوتپرینت) — متفاوت در Package.
ADS8322YB/2KG4
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ADS8322Y/2K حداکثر مقادیر مجاز و مشخصات الکتریکی
| رزولوشن | 16 bit |
| نرخ نمونهبرداری | 500 kSPS |
| Conversion Architecture | Successive Approximation Register (SAR) |
| Input Type | Unipolar, 1 channel |
| Internal Reference Voltage | 2.5 V |
| Sample-and-Hold | Inherent |
| رابط | Parallel, full 16-bit or 8-bit option |
| Process Technology | CMOS |
| محدوده دمای کاری | -40 °C to +85 °C |
| بستهبندی | 32-pin TQFP, 5 mm x 5 mm |
| نوع نصب | Surface mount |
راهنمای پیکربندی پین ADS8322Y/2K 32-pin tqfp, 5 mm x 5 mm
پیکربندی پین برای ADS8322Y/2K (پکیج 32-pin tqfp, 5 mm x 5 mm). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای ADS8322Y/2K.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ADS8322Y/2K مناسب است برای 6 کاربردs: Industrial Sensor Acquisition, Process Control Monitoring, Laboratory Data Acquisition, Power-System Instrumentation, Factory Automation Controllers, Embedded Measurement Systems.
Industrial Sensor Acquisition
The ADS8322Y/2K fits industrial sensor-acquisition front ends that require 16-bit numerical resolution and throughput up to 500 kSPS. Its single unipolar SAR input can acquire the output of a conditioned bridge, transmitter, or resistive sensor while the internal 2.5 V reference supports a compact conversion chain. The 32-pin TQFP package also suits compact controller boards where routing space is limited but parallel data capture must remain deterministic. Place the analog front end close to the ADC input, keep the reference and supply returns quiet, and route the parallel bus away from high-slope sensor nodes.
پیشنهادی
Process Control Monitoring
The ADS8322Y/2K is appropriate for process-monitoring loops where pressure, flow, level, or temperature signals change faster than a slow control-loop update. A 500 kSPS maximum rate allows the acquisition system to capture transient behavior while retaining a full 16-bit code for calculation and diagnostics. The unipolar input and internal 2.5 V reference simplify signal-chain definition when the conditioned sensor output remains within the converter input limits. In a factory controller, isolate digital activity from the analog sensor node and provide local bypass capacitance to prevent switching circuitry from disturbing the measured waveform.
پیشنهادی
Laboratory Data Acquisition
The ADS8322Y/2K suits laboratory instrumentation that combines 16-bit measurement resolution with a direct parallel data interface. A 500 kSPS SAR converter can sample controlled waveforms, sensor outputs, or excitation-response signals without relying on a serial command protocol for every conversion. The full 16-bit interface provides the complete result in one read cycle, while the 8-bit option can reduce interface activity when eight-bit data are sufficient. For a compact instrument, route the bus to an FPGA or controller through consistent logic levels, use a solid reference-return path, and follow the datasheet timing requirements for chip-select and read-control signals.
پیشنهادی
Power-System Instrumentation
The ADS8322Y/2K can serve as the sampling element in power-system monitoring equipment for voltage, current, or position feedback. The 500 kSPS rate supports rapid acquisition of the controlled variable, while the 16-bit result provides additional resolution for calibration and protection decisions. Its internal 2.5 V reference and unipolar architecture help simplify a protected analog input stage when the conditioned signal is scaled appropriately. High-current switching paths should be kept away from the ADC; use differential sensing techniques where appropriate and route analog and digital returns carefully to prevent switching transients from appearing as conversion errors.
پیشنهادی
Factory Automation Controllers
The ADS8322Y/2K is well matched to compact factory automation controllers that must acquire analog feedback while maintaining a straightforward digital interface. A maximum rate of 500 kSPS supports rapidly changing actuator feedback, and the full 16-bit parallel interface can connect directly to digital control logic. The 32-pin TQFP format reduces PCB footprint compared with many larger high-resolution converter packages. Place decoupling capacitors at the supply pins, assign the analog input with a short trace, and maintain controlled return paths to reduce coupling from motor drivers, relay circuits, and high-current switching stages on the same controller board.
پیشنهادی
Embedded Measurement Systems
The ADS8322Y/2K supports embedded measurement systems that need predictable sampling and direct acquisition of a 16-bit code. Its SAR architecture and inherent sample-and-hold function are useful when software must observe successive samples with defined timing rather than waiting for a digital filter to settle. The device operates across -40 °C to +85 °C, supporting industrial embedded equipment with controlled environmental exposure. Designers should budget sufficient acquisition and conversion time in the control loop, check the parallel-interface timing against the host processor, and isolate analog routing from clocked digital signals to preserve measurement integrity.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ADS8322Y/2K — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ADS8322YB/2K |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 32-pin TQFP (PBS), 5 mm x 5 mm | 32-pin TQFP (PBS), 5 mm x 5 mm |
| Resolution | 16 bit | 16 bit |
| Sampling Rate | 500 kSPS | 500 kSPS |
| Conversion Architecture | Successive Approximation Register (SAR) | Successive Approximation Register (SAR) |
| Internal Reference | 2.5 V | 2.5 V |
| Input Configuration | Unipolar, 1 channel | Unipolar, 1 channel |
| Digital Interface | Parallel, full 16-bit or 8-bit option | Parallel, full 16-bit or 8-bit option |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C |
| Sample-and-Hold | Inherent | Inherent |
تفاوتهای کلیدی
- Direct 500 kSPS sampling in a compact 32-pin TQFP (در مقابلADS8322Y/250)
- Full 16-bit parallel data access (در مقابلADS8322YB/2K)
- Integrated reference reduces external circuitry (در مقابلADS8322YB/2K)
یادداشتهای طراحی
Route the analog input directly to ADS8322Y/2K and keep the input trace short and away from the 16-bit parallel bus. Place bypass capacitors at the supply pins using the manufacturer application circuit as the layout reference. Provide a low-impedance ground path for the input and reference return, and avoid routing high-current switching or motor-control paths beneath the converter.
The ADS8322Y/2K supports a full 16-bit interface or an 8-bit mode using two read cycles. Select the interface that matches the host timing budget, then verify acquisition, conversion, and output timing from the manufacturer timing diagrams. Keep the parallel traces matched in length where practical, terminate them appropriately for the logic family, and avoid stubs that could create reflections during repeated data transfers.
Do not assume that every ADS8322 ordering code is an interchangeable substitute. ADS8322Y/2K is specified at 500 kSPS, while the Y/250 ordering code identifies a lower-throughput version. Confirm input range, supply voltage, reference behavior, interface timing, temperature grade, and package pinout for each selected MPN before approving a replacement or reusing the PCB across different ordering codes.
اطلاعات انطباق
The available manufacturer and distributor information identifies an industrial-temperature ADS8322 device but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this ordering code is not identified as an automotive-qualified variant.