Texas Instruments

ADS8322Y/2K - 16-Bit 500kSPS SAR ADC | Texas Instruments

N.º da peça: ADS8322Y/2K ✓ Ativo
2.5 V Vdss 32-pin TQFP, 5 mm x 5 mm Package
MOQ: 1 |

ADS8322Y/2K Visão geral

The Texas Instruments ADS8322Y/2K is a 16-bit, 500 kSPS unipolar successive-approximation analog-to-digital converter in a 32-pin TQFP package. It includes an internal 2.5 V reference and an inherent sample-and-hold input, providing a compact single-channel conversion solution for industrial data-acquisition systems.

An ADC is a data-conversion IC that transforms an analog voltage into a digital code. The ADS8322 belongs to the SAR ADC hierarchy, where a capacitor-based internal DAC successively compares a sampled input voltage with successive trial values. This architecture supports continuous conversion without the signal-processing latency associated with many delta-sigma converters, making the device suitable for measurement systems that require direct sampling and parallel digital output.

The principal features include 16-bit resolution, a maximum sampling rate of 500 kSPS, a unipolar input range, an internal 2.5 V reference, and a full 16-bit parallel interface. An 8-bit read option is also available, allowing data to be transferred in two read cycles through eight interface pins. These features balance conversion resolution and throughput in a single 32-pin TQFP package.

Internally, the ADS8322 uses a capacitor-based SAR register with an inherent sample-and-hold function. The converter can present conversion results through its complete 16-bit parallel interface or through the reduced 8-bit interface. Because the device is specified as a CMOS ADC and is offered in the industrial temperature range of -40 °C to +85 °C, it is suited to embedded industrial instrumentation where a predictable sampling rate and compact parallel interface are valuable.

Typical applications include industrial process monitoring, sensor signal acquisition, laboratory measurement equipment, factory automation, power-system instrumentation, and embedded control systems. Its 500 kSPS rate supports acquisition of rapidly changing analog quantities, while the 16-bit code width provides finer numerical resolution than conventional lower-resolution SAR converters.

PCB design should preserve the relationship between the analog input, reference circuitry, supply connections, and parallel data bus. Keep analog traces short, use a quiet ground return, and route the digital output bus away from the input node. Follow the pin-description table and recommended application circuit in the manufacturer datasheet when assigning tracks, terminating the interface, and selecting decoupling components.

This page combines the official device characteristics with a package-aware comparison, practical PCB guidance, drop-in replacement screening, and application-focused design context. It is intended to accelerate component selection while keeping every proposed replacement tied to verified package and parameter requirements.

Alternativas drop-in para ADS8322Y/2K — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ADS8322Y/2K (mesmo formato e footprint) — diferindo em Package.

Texas Instruments
Package: 32-TQFP (5x5 mm)

ADS8322YB/2KG4

✅ Drop-In
Texas Instruments
📦 32-pin TQFP (PBS)
16 bit · 500 kSPS · SAR (Successive Approximation Register) · 1 · Unipolar · 2.5 V · 5 V (single supply) · Parallel (16-bit or 8-bit mode)

Consulte o preço

Ver ficha técnica →

ADS8322Y/2K Classificações máximas e características elétricas

Resolução 16 bit
Taxa de amostragem 500 kSPS
Conversion Architecture Successive Approximation Register (SAR)
Input Type Unipolar, 1 channel
Internal Reference Voltage 2.5 V
Sample-and-Hold Inherent
Interface Parallel, full 16-bit or 8-bit option
Process Technology CMOS
Faixa de temperatura de operação -40 °C to +85 °C
Encapsulamento 32-pin TQFP, 5 mm x 5 mm
Tipo de montagem Surface mount

Guia de Configuração de Pinos do ADS8322Y/2K 32-pin tqfp, 5 mm x 5 mm

Configuração de pinos para ADS8322Y/2K (pacote 32-pin tqfp, 5 mm x 5 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 32-pin tqfp, 5 mm x 5 mm para ADS8322Y/2K

Nenhum dado detalhado de pinagem disponível para ADS8322Y/2K.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADS8322Y/2K é adequado para 6 aplicaçãos: Industrial Sensor Acquisition, Process Control Monitoring, Laboratory Data Acquisition, Power-System Instrumentation, Factory Automation Controllers, Embedded Measurement Systems.

🏭

Industrial Sensor Acquisition

The ADS8322Y/2K fits industrial sensor-acquisition front ends that require 16-bit numerical resolution and throughput up to 500 kSPS. Its single unipolar SAR input can acquire the output of a conditioned bridge, transmitter, or resistive sensor while the internal 2.5 V reference supports a compact conversion chain. The 32-pin TQFP package also suits compact controller boards where routing space is limited but parallel data capture must remain deterministic. Place the analog front end close to the ADC input, keep the reference and supply returns quiet, and route the parallel bus away from high-slope sensor nodes.

⚡

Process Control Monitoring

The ADS8322Y/2K is appropriate for process-monitoring loops where pressure, flow, level, or temperature signals change faster than a slow control-loop update. A 500 kSPS maximum rate allows the acquisition system to capture transient behavior while retaining a full 16-bit code for calculation and diagnostics. The unipolar input and internal 2.5 V reference simplify signal-chain definition when the conditioned sensor output remains within the converter input limits. In a factory controller, isolate digital activity from the analog sensor node and provide local bypass capacitance to prevent switching circuitry from disturbing the measured waveform.

📺

Laboratory Data Acquisition

The ADS8322Y/2K suits laboratory instrumentation that combines 16-bit measurement resolution with a direct parallel data interface. A 500 kSPS SAR converter can sample controlled waveforms, sensor outputs, or excitation-response signals without relying on a serial command protocol for every conversion. The full 16-bit interface provides the complete result in one read cycle, while the 8-bit option can reduce interface activity when eight-bit data are sufficient. For a compact instrument, route the bus to an FPGA or controller through consistent logic levels, use a solid reference-return path, and follow the datasheet timing requirements for chip-select and read-control signals.

🔧

Power-System Instrumentation

The ADS8322Y/2K can serve as the sampling element in power-system monitoring equipment for voltage, current, or position feedback. The 500 kSPS rate supports rapid acquisition of the controlled variable, while the 16-bit result provides additional resolution for calibration and protection decisions. Its internal 2.5 V reference and unipolar architecture help simplify a protected analog input stage when the conditioned signal is scaled appropriately. High-current switching paths should be kept away from the ADC; use differential sensing techniques where appropriate and route analog and digital returns carefully to prevent switching transients from appearing as conversion errors.

🏭

Factory Automation Controllers

The ADS8322Y/2K is well matched to compact factory automation controllers that must acquire analog feedback while maintaining a straightforward digital interface. A maximum rate of 500 kSPS supports rapidly changing actuator feedback, and the full 16-bit parallel interface can connect directly to digital control logic. The 32-pin TQFP format reduces PCB footprint compared with many larger high-resolution converter packages. Place decoupling capacitors at the supply pins, assign the analog input with a short trace, and maintain controlled return paths to reduce coupling from motor drivers, relay circuits, and high-current switching stages on the same controller board.

🧩

Embedded Measurement Systems

The ADS8322Y/2K supports embedded measurement systems that need predictable sampling and direct acquisition of a 16-bit code. Its SAR architecture and inherent sample-and-hold function are useful when software must observe successive samples with defined timing rather than waiting for a digital filter to settle. The device operates across -40 °C to +85 °C, supporting industrial embedded equipment with controlled environmental exposure. Designers should budget sufficient acquisition and conversion time in the control loop, check the parallel-interface timing against the host processor, and isolate analog routing from clocked digital signals to preserve measurement integrity.

What are the key specifications of ADS8322Y/2K that engineers should know?
The ADS8322Y/2K is a 16-bit, 500 kSPS, unipolar SAR ADC with an internal 2.5 V reference and a parallel interface in a 32-pin TQFP package. According to the Texas Instruments ADS8322 product page, the capacitor-based SAR core includes inherent sample-and-hold and supports either a full 16-bit interface or an 8-bit two-cycle read option. The industrial temperature range is -40 °C to +85 °C.
What is the conversion rate of ADS8322Y/2K?
The ADS8322Y/2K performs conversions at up to 500 kSPS. This figure is the maximum throughput stated for the Texas Instruments 16-bit SAR converter family. The device uses a capacitor-based successive-approximation register with inherent sample-and-hold, allowing rapid acquisition of changing analog inputs while retaining a direct parallel-output interface.
Does ADS8322Y/2K include an internal voltage reference?
Yes, the ADS8322Y/2K includes an internal 2.5 V reference. This integration simplifies the analog front end by reducing the number of external reference components required for basic operation. The Texas Instruments product information also identifies the converter as unipolar, with a 16-bit resolution and a maximum sampling rate of 500 kSPS.
Where can I download the ADS8322Y/2K datasheet PDF?
The official ADS8322 product page provides the manufacturer datasheet and supporting technical information for the ADS8322Y/2K. The device-specific ordering information is also available on the Texas Instruments part-details page for ADS8322Y/2K. Use the manufacturer datasheet as the authority for the complete pin descriptions, electrical characteristics, timing diagrams, and recommended application circuit.
Where is the ADS8322Y/2K pinout and package information?
The ADS8322Y/2K uses a 32-pin TQFP package measuring 5 mm by 5 mm. The complete pin-number-to-signal mapping appears in the pin-description section of the Texas Instruments ADS8322 datasheet. Use that table when assigning the analog input, power, reference, control, and parallel data-bus nets to the PCB footprint.
What is the difference between ADS8322Y/2K and ADS8322YB/2K?
The verified device descriptions identify both ADS8322Y/2K and ADS8322YB/2K as 16-bit, single-input SAR ADCs in the 32-pin TQFP package. The available family information identifies no resolution, sampling-rate, package, or temperature-range difference, so ADS8322YB/2K is the closest confirmed ordering-code alternative. Confirm purchasing, qualification, and lifecycle details against the manufacturer before substitution.
When should I choose ADS8322Y/2K over a lower-speed ADS8322 variant?
Choose ADS8322Y/2K when the acquisition path must support up to 500 kSPS while retaining 16-bit resolution. A lower-speed ADS8322 variant may be appropriate for slower signals or power-constrained designs, but changing throughput can also alter acquisition timing and system bandwidth requirements. The manufacturer part details should be checked for exact ordering-code and electrical differences.
Is ADS8322Y/2K suitable for industrial sensor measurement?
Yes, ADS8322Y/2K is suitable for industrial measurement systems requiring a 16-bit, 500 kSPS ADC. The device is specified for -40 °C to +85 °C and uses a parallel interface for direct digital-data transfer. Its unipolar input architecture and internal 2.5 V reference make it useful for sensor-conditioning systems whose analog outputs remain within the device's specified input range.
What can replace ADS8322Y/2K without changing the PCB footprint?
ADS8322YB/2K is the only confirmed pin-compatible ordering-code alternative identified for the ADS8322Y/2K, and it retains the 16-bit, 500 kSPS, 32-pin TQFP configuration. A smaller number of confirmed drop-in options means that a PCB redesign should not be assumed for other family members. Validate every signal, timing condition, and qualification requirement before replacing the installed device.
Is ADS8322Y/2K the same as ADS8322Y/250?
No, ADS8322Y/2K and ADS8322Y/250 are not equivalent in conversion throughput. The Y/2K version is specified at 500 kSPS, while the Y/250 ordering code is associated with a lower sampling-rate version. Because the 250 kSPS device is 50% slower, it does not meet the 30% parameter-proximity threshold required for a drop-in alternative in this listing.
How should an ADS8322Y/2K parallel data bus be routed on a PCB?
Route the 16-bit parallel bus as a short, continuous group away from the analog input and reference nodes. Keep the analog input trace compact, provide a direct ground return for analog currents, and place bypass capacitors close to the relevant supply pins. Although the interface can operate in an 8-bit mode using two read cycles, use the full interface when throughput or update timing requires it.
What is the best Analog Devices equivalent for ADS8322Y/2K?
The verified search did not identify a cross-manufacturer ADC that can be confirmed as both pin-to-pin compatible and within the required parameter-match threshold. Analog Devices parts such as AD7472 may share the broader 16-bit SAR ADC category, but category similarity does not prove a drop-in replacement. Use the manufacturer cross-reference process or validate a specific candidate against the ADS8322Y/2K pinout, interface timing, supply requirements, and package.
How much power does ADS8322Y/2K consume?
The manufacturer describes ADS8322 as a micropower sampling ADC, but the exact supply voltage and operating-current figures are not reproduced in the available product summary. Use the electrical-characteristics table in the Texas Instruments ADS8322 datasheet for input current, supply current, reference current, and power consumption at the selected conversion rate. Those operating conditions determine the thermal and power-budget comparison with alternatives.
Where can I buy ADS8322Y/2K and check its availability?
Use the Request a Quote form on this page to request ADS8322Y/2K pricing, current availability, lead time, and order quantities. The request should specify the exact ADS8322Y/2K ordering code, the required quantity, and the desired TQFP delivery format. A confirmed order commitment is more useful than a general stock indicator because component availability can change by package and lot.
What is the lead time for ADS8322Y/2K?
Current production lead time for ADS8322Y/2K should be obtained through the Request a Quote form on this page. Include the required quantity and intended delivery date so the supplier can confirm the actual schedule rather than return a generic availability statement. For scheduled production, plan the request early enough to account for manufacturing, inspection, and shipment time.

Dados de referência de engenharia para ADS8322Y/2K — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose ADS8322Y/2K when the design needs a 16-bit unipolar SAR ADC with throughput up to 500 kSPS, an internal 2.5 V reference, and a parallel interface in a 32-pin TQFP package. It is well suited to industrial instrumentation, process monitoring, factory automation, and embedded measurement systems that can accommodate the converter's specified input and supply conditions. ADS8322YB/2K is the closest confirmed drop-in ordering-code option because the available family information shows the same resolution, throughput, temperature range, and package; confirm purchasing and qualification details before substitution. ADS8322Y/250 should not be treated as a drop-in choice when the 500 kSPS rate is required because its 250 kSPS throughput is 50% lower. No cross-manufacturer part is presented as a direct replacement because package, pinout, interface timing, and electrical compatibility were not confirmed together.

Comparação com alternativas

Parâmetro Este produto ADS8322YB/2K
Brand Texas Instruments Texas Instruments
Package 32-pin TQFP (PBS), 5 mm x 5 mm 32-pin TQFP (PBS), 5 mm x 5 mm
Resolution 16 bit 16 bit
Sampling Rate 500 kSPS 500 kSPS
Conversion Architecture Successive Approximation Register (SAR) Successive Approximation Register (SAR)
Internal Reference 2.5 V 2.5 V
Input Configuration Unipolar, 1 channel Unipolar, 1 channel
Digital Interface Parallel, full 16-bit or 8-bit option Parallel, full 16-bit or 8-bit option
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C
Sample-and-Hold Inherent Inherent

Principais diferenciais

  • Direct 500 kSPS sampling in a compact 32-pin TQFP (vs ADS8322Y/250)
  • Full 16-bit parallel data access (vs ADS8322YB/2K)
  • Integrated reference reduces external circuitry (vs ADS8322YB/2K)

Notas de projeto

Route the analog input directly to ADS8322Y/2K and keep the input trace short and away from the 16-bit parallel bus. Place bypass capacitors at the supply pins using the manufacturer application circuit as the layout reference. Provide a low-impedance ground path for the input and reference return, and avoid routing high-current switching or motor-control paths beneath the converter.

The ADS8322Y/2K supports a full 16-bit interface or an 8-bit mode using two read cycles. Select the interface that matches the host timing budget, then verify acquisition, conversion, and output timing from the manufacturer timing diagrams. Keep the parallel traces matched in length where practical, terminate them appropriately for the logic family, and avoid stubs that could create reflections during repeated data transfers.

Do not assume that every ADS8322 ordering code is an interchangeable substitute. ADS8322Y/2K is specified at 500 kSPS, while the Y/250 ordering code identifies a lower-throughput version. Confirm input range, supply voltage, reference behavior, interface timing, temperature grade, and package pinout for each selected MPN before approving a replacement or reusing the PCB across different ordering codes.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The available manufacturer and distributor information identifies an industrial-temperature ADS8322 device but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this ordering code is not identified as an automotive-qualified variant.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ADS8322Y/2K datasheet ADS8322Y/2K datasheet pdf ADS8322Y/2K pinout ADS8322Y/2K specifications ADS8322Y/2K equivalent ADS8322Y/2K replacement ADS8322Y/2K cross reference ADS8322Y/2K vs ADS8322YB/2K Texas Instruments ADS8322Y/2K ADS8322 16 bit 500 kSPS ADC ADS8322 TQFP-32 pinout ADS8322 industrial sensor acquisition ADS8322Y/2K price ADS8322Y/2K stock

Componentes & termos relacionados

Texas Instruments ADS8322Y/2K ADS8322YB/2K ADS8322Y/250 ADS8322 Analog-to-digital converter ADC Successive Approximation Register SAR ADC Capacitor-based DAC Inherent sample-and-hold Unipolar ADC 16-bit resolution 500 kSPS sampling rate Internal 2.5 V reference Parallel data interface 32-pin TQFP TQFP package family Surface-mount package CMOS Industrial temperature range Process monitoring Sensor signal acquisition Factory automation
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ