Analog Devices

ADSP-SC571CSWZ-3 Dual SHARC+ DSP | Analog Devices

MPN: ADSP-SC571CSWZ-3 ✓ فعال
176-LQFP exposed-pad, 24 x 24 mm Package 300 MHz per core Speed 768 KB per SHARC+ core Memory
حداقل سفارش: 1 |

ADSP-SC571CSWZ-3 نمای کلی

The Analog Devices ADSP-SC571CSWZ-3 is a heterogeneous fixed/floating-point digital signal processor combining two 300 MHz SHARC+ cores with an ARM Cortex-A5 core in a 176-LQFP exposed-pad package measuring 24 x 24 mm. It provides 768 KB of L1 memory per SHARC+ core, 1 MB of shared L2 memory, and approximately 1.768 MB of total on-chip RAM. The processor also integrates 10/100 Ethernet and interfaces including CAN, I2C, SPI, SPORT, UART/USART, USB OTG, DAI, EBI/EMI, and MMC/SD/SDIO.

A digital signal processor is a specialized semiconductor that executes mathematical operations in parallel and in real time. In the processor hierarchy, the ADSP-SC571 belongs to the SHARC+ digital signal processor family and combines DSP acceleration with an ARM control processor. This heterogeneous architecture separates deterministic signal-processing workloads from operating-system, networking, and control tasks while allowing software to integrate both execution environments.

The two SHARC+ cores provide parallel fixed/floating-point processing at 300 MHz, while the Cortex-A5 core supports control and application software. The ADSP-SC571CSWZ-3 combines 768 KB of L1 cache per SHARC+ core with 1 MB of shared L2 cache. Its integrated 10/100 Ethernet controller reduces external interface requirements, while the broad set of serial and external bus interfaces supports industrial control, communications, audio, and embedded signal-processing systems.

The -3 ordering code identifies the selected ADSP-SC571 product grade and configuration. The device operates in a -40°C to 100°C ambient-temperature range and is supplied in a tray-compatible 176-LQFP exposed-pad package. External memory is used for boot firmware, application code, and data that exceed the internal memory. The exposed thermal pad requires careful PCB layout and copper-based heat dissipation to preserve performance under sustained processing loads.

Typical applications include industrial motor and motion control, industrial Ethernet equipment, audio and video signal processing, communications infrastructure, test and measurement systems, and multichannel data-acquisition equipment. The Ethernet interface is particularly useful in networked industrial controllers, while the SHARC+ cores can accelerate filtering, FFT, modulation, and other real-time algorithms in parallel with the ARM-side software tasks.

Design the PCB with a continuous ground plane and connect the exposed pad to ground using the manufacturer's recommended via and copper-array pattern. Route high-speed memory, Ethernet, and serial interfaces away from noisy switching supplies and preserve the required input and output decoupling arrangement. Firmware, device drivers, peripheral configuration, and clock-tree implementation must be validated against the manufacturer hardware design guidance before production release.

This page combines the processor architecture, package characteristics, interface capabilities, ordering-code details, practical implementation guidance, and direct comparison points for engineers evaluating the ADSP-SC571 family in high-performance embedded signal-processing designs.

جایگزین‌های drop-in برای ADSP-SC571CSWZ-3 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ADSP-SC571CSWZ-3 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Maximum Clock Frequency, Processor Type.

Analog Devices
Package: 176-LQFP exposed-pad, 24 mm x 24 mm
Maximum Clock Frequency: 500 MHz
مقایسه با ADSP-SC571CSWZ-3 →
Analog Devices
Package: 176-LQFP-EP, 24 mm x 24 mm
Maximum Clock Frequency: 500 MHz
مقایسه با ADSP-SC571CSWZ-3 →
Analog Devices
Package: 176-LQFP-EP, 24 mm x 24 mm
Maximum Clock Frequency: 300 MHz
Processor Type: Fixed/Floating Point Digital Signal Processor
مقایسه با ADSP-SC571CSWZ-3 →

ADSP-SC571BSWZ-3

✅ جایگزین مستقیم
Analog Devices
📦 176-LQFP exposed-pad (24 x 24 mm)
Fixed/Floating-Point Digital Signal Processor · 300 MHz · 2x SHARC+ cores · Arm Cortex-A5 core · SHARC+ dual-core with Arm Cortex-A5 · Fixed-point and floating-point · 3.3 V and 1.10 V · 176-LQFP exposed-pad

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADSP-SC571CSWZ-5

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Analog Devices
📦 176-LQFP exposed-pad (24 x 24 mm)
Fixed/Floating-Point Digital Signal Processor · 2 cores · Arm Cortex-A5 core · 500 MHz · 768 KB · 1 MB · 10/100 Ethernet · 176-LQFP-EP, 24 mm x 24 mm

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADSP-SC571BSWZ-5

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Analog Devices
📦 176-LQFP exposed-pad (24 x 24 mm)
Fixed/Floating-Point Digital Signal Processor · Dual-core SHARC+ with Arm Cortex-A5 · 500 MHz · 2 cores · 1 Arm Cortex-A5 core · 768 KB · 1 MB · 10/100 Ethernet

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADSP-SC571BSWZ-2

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 176-LQFP exposed-pad (24 x 24 mm)
Same 176-LQFP exposed-pad footprint and 300 MHz dual-SHARC+ architecture; -2 versus -3 ordering grade changes the defined grade, while core frequency changes by 0%.

📋 جایگزین مرجع (خارج از کاتالوگ)

ADSP-SC571CSWZ-2

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 176-LQFP exposed-pad (24 x 24 mm)
Same 176-LQFP exposed-pad footprint and 300 MHz dual-SHARC+ architecture; -2 versus -3 ordering grade changes the defined grade, while core frequency changes by 0%.

📋 جایگزین مرجع (خارج از کاتالوگ)

ADSP-SC571CSWZ-3 مشخصات

Processor Type Fixed/Floating-Point Digital Signal Processor
DSP Core Count 2 SHARC+ cores
Control Processor ARM Cortex-A5 core
SHARC+ Core Clock Rate 300 MHz per core
L1 Memory 768 KB per SHARC+ core
Shared L2 Memory 1 MB
Total On-Chip RAM 1.768 MB
Non-Volatile Memory External
Ethernet Interface 10/100 Ethernet
Serial and Control Interfaces CAN, EBI/EMI, DAI, I2C, MMC/SD/SDIO, SPI, SPORT, UART/USART, USB OTG
بسته‌بندی 176-LQFP exposed-pad, 24 x 24 mm
نوع نصب Surface Mount
Operating Ambient Temperature -40°C to 100°C
Manufacturing Status Active
Packaging Type Tray

راهنمای پیکربندی پین ADSP-SC571CSWZ-3 176-lqfp exposed-pad, 24 x 24 mm

پیکربندی پین برای ADSP-SC571CSWZ-3 (پکیج 176-lqfp exposed-pad, 24 x 24 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 176-lqfp exposed-pad, 24 x 24 mm برای ADSP-SC571CSWZ-3

داده پین‌آوت تفصیلی موجود نیست برای ADSP-SC571CSWZ-3.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ADSP-SC571CSWZ-3 مناسب است برای 6 کاربردs: Industrial Motor and Motion Control, Industrial Ethernet Control Equipment, Audio and Video Signal Processing, Communications Infrastructure, Test and Measurement Equipment, Machine Vision and Inspection.

🏭

Industrial Motor and Motion Control

The ADSP-SC571CSWZ-3 fits motion-control systems that need deterministic signal processing alongside a separate control environment. Its two 300 MHz SHARC+ cores can execute filtering, feedback loops, and sensor fusion in parallel, while the ARM Cortex-A5 core manages control logic and communications. The -40°C to 100°C ambient range supports industrial equipment, and the 10/100 Ethernet interface allows the controller to participate in networked motion systems. In a motor drive, the exposed-pad package still requires a thermal-conscious PCB with a connected copper ground array and carefully routed high-current power stage.

🌐

Industrial Ethernet Control Equipment

The ADSP-SC571CSWZ-3 is appropriate for industrial Ethernet controllers that combine network management with time-sensitive signal analysis. Its integrated 10/100 Ethernet interface provides the foundation for wired industrial communications, while the dual 300 MHz SHARC+ cores perform filtering, spectrum analysis, or condition monitoring without monopolizing the ARM Cortex-A5 control core. A 1 MB shared L2 cache and 768 KB of L1 memory per SHARC+ core support real-time working sets. The 176-LQFP exposed-pad package provides adequate board area for thermal management and decoupling in compact industrial controllers.

🎧

Audio and Video Signal Processing

The ADSP-SC571CSWZ-3 can divide real-time multimedia workloads between its SHARC+ cores and ARM control processor. Two 300 MHz DSP cores support parallel audio filtering, FFT-based analysis, mixing, equalization, or video-processing functions, while the Cortex-A5 core can manage control software and external-device coordination. The approximately 1.768 MB total on-chip RAM reduces some external-memory traffic for active working sets, and the DAI interface supports digital audio connectivity. The LQFP exposed-pad package must be paired with controlled-return layouts to prevent processor self-heating from degrading adjacent signal paths.

🌐

Communications Infrastructure

The ADSP-SC571CSWZ-3 is suitable for embedded communications equipment requiring parallel DSP performance and network connectivity. Its two 300 MHz SHARC+ cores can implement filtering, modulation, demodulation, equalization, or packet-processing kernels, while the Cortex-A5 core handles protocol software and system management. Ethernet, USB OTG, UART/USART, SPI, I2C, CAN, and SPORT provide multiple paths for network, storage, transceiver, and control connectivity. In a communications enclosure, place the 10/100 Ethernet PHY, isolation components, and switching supplies away from sensitive DSP routing to minimize conducted and radiated interference.

🖥️

Test and Measurement Equipment

The ADSP-SC571CSWZ-3 can serve as the real-time processing core in analyzers, condition-monitoring systems, and high-speed data-acquisition instruments. Two 300 MHz SHARC+ cores allow concurrent processing of multiple channels or stages of an FFT, digital filter, or demodulation chain, and the ARM Cortex-A5 core can coordinate acquisition, storage, and user interfaces. External non-volatile memory accommodates firmware and large test configurations. The -40°C to 100°C range is useful for laboratory and light-industrial equipment, but precision analog and high-speed memory interfaces still require grounded, impedance-controlled routing and effective thermal management.

🎥

Machine Vision and Inspection

The ADSP-SC571CSWZ-3 is compatible with machine-vision and automated inspection controllers that combine high-throughput image processing with deterministic control functions. The two 300 MHz SHARC+ cores can execute separable filters, feature transforms, or motion-detection operations concurrently, while the ARM Cortex-A5 core handles camera control, configuration, diagnostics, and network services. Ethernet supports camera or inspection-station connectivity, and the SPORT, SPI, I2C, and DAI interfaces support sensors and converters. Keep high-speed image-data routing away from switching-regulator paths and provide a solid ground reference around the 176-LQFP exposed pad.

خلاصه محصولات پیشنهادی

ADSP-SC571BSWZ-3 Analog Devices استفاده‌شده در: Industrial Motor and Motion Control, Machine Vision and Inspection ADSP-CM408BSWZ-AF Related Analog Devices high-performance embedded processor family استفاده‌شده در: Industrial Motor and Motion Control, Communications Infrastructure ADZS-SC573-EZLITE SHARC+ and Cortex-A5 evaluation platform for software bring-up استفاده‌شده در: Industrial Ethernet Control Equipment, Audio and Video Signal Processing, Test and Measurement Equipment, Machine Vision and Inspection ADSP-SC573 Related SHARC+ processor for evaluation and architecture comparison استفاده‌شده در: Industrial Ethernet Control Equipment, Audio and Video Signal Processing, Test and Measurement Equipment ADSP-SC571CSWZ-5 Analog Devices استفاده‌شده در: Communications Infrastructure
What is ADSP-SC571CSWZ-3?
The ADSP-SC571CSWZ-3 is a fixed/floating-point digital signal processor from Analog Devices. It combines two 300 MHz SHARC+ DSP cores with an ARM Cortex-A5 control core, integrates 768 KB of L1 memory per SHARC+ core and 1 MB of shared L2 memory, and uses a 176-LQFP exposed-pad package. The Analog Devices product page identifies the ADSP-SC57x family as members of the SHARC processor family.
What are the key specifications of ADSP-SC571CSWZ-3 that engineers should know?
The ADSP-SC571CSWZ-3 combines two 300 MHz SHARC+ cores with one ARM Cortex-A5 core and provides approximately 1.768 MB of total on-chip RAM. Its 10/100 Ethernet interface and CAN, I2C, SPI, SPORT, UART/USART, USB OTG, DAI, EBI/EMI, and MMC/SD/SDIO interfaces support embedded communications and real-time signal processing. The device is packaged in a 24 x 24 mm, 176-LQFP exposed-pad package.
How many cores are in ADSP-SC571CSWZ-3?
The ADSP-SC571CSWZ-3 contains three processing cores: two 300 MHz SHARC+ digital signal processors and one ARM Cortex-A5 control processor. The SHARC+ cores execute fixed- and floating-point signal-processing algorithms, while the Cortex-A5 core handles control-plane software. According to the Analog Devices product description, the ADSP-SC57x processors are based on the SHARC+ dual-core and ARM Cortex-A5 architecture.
What memory is available in ADSP-SC571CSWZ-3?
ADSP-SC571CSWZ-3 provides 768 KB of L1 memory for each SHARC+ core, 1 MB of shared L2 memory, and approximately 1.768 MB of total on-chip RAM. Non-volatile storage is external rather than integrated. This memory hierarchy supports deterministic algorithms, working data, networking software, and control code while leaving external memory available for boot firmware, larger applications, and nonvolatile assets.
Where can I download the ADSP-SC571CSWZ-3 datasheet PDF?
The official ADSP-SC571 product page at Analog Devices is the primary starting point for the ADSP-SC571CSWZ-3 datasheet PDF, hardware manual, errata, and supporting documentation. Use the documentation links associated with the ADSP-SC571 product page to select the correct processor revision and ordering code. The manufacturer ADSP-SC571 documentation should control pin assignments, clocking, memory, electrical limits, and PCB implementation.
Where can I find the ADSP-SC571CSWZ-3 pinout and package drawing?
The ADSP-SC571CSWZ-3 pinout and mechanical package drawing are documented in the manufacturer ADSP-SC571 hardware documentation and datasheet package information. The device uses a 176-LQFP exposed-pad package with a 24 x 24 mm body. Use the official pin-description table when assigning signals and the package drawing when defining PCB land patterns, solder masks, and the exposed-pad thermal array.
What interfaces does ADSP-SC571CSWZ-3 support?
The ADSP-SC571CSWZ-3 supports CAN, EBI/EMI, Ethernet, DAI, I2C, MMC/SD/SDIO, SPI, SPORT, UART/USART, and USB OTG. Its Ethernet controller supports 10/100 operation, while the other interfaces connect external transceivers, memories, sensors, audio codecs, storage devices, and industrial peripherals. Exact muxing and electrical limits must be confirmed in the manufacturer pin and peripheral documentation.
Is ADSP-SC571CSWZ-3 suitable for industrial applications?
The ADSP-SC571CSWZ-3 is suitable for many industrial applications because it combines real-time DSP performance, an ARM Cortex-A5 control core, 10/100 Ethernet, and numerous serial interfaces. Its documented operating ambient-temperature range is -40°C to 100°C. For deployments with conductive dust, long cable runs, extended temperature requirements, or functional-safety obligations, evaluate the complete enclosure, protection circuitry, and applicable certification requirements.
Where can I buy ADSP-SC571CSWZ-3 online?
Use the Request a Quote form on this page to request ADSP-SC571CSWZ-3 pricing, stock confirmation, and lead time. The exact ordering code includes the 176-LQFP exposed-pad package, -40°C to 100°C temperature grade, and -3 configuration. Confirm the complete MPN, tray packaging, quantities, and date code with the supplier before placing a production order.
What is the price of ADSP-SC571CSWZ-3?
Request current ADSP-SC571CSWZ-3 pricing through the Request a Quote form on this page. Pricing depends on order quantity, packaging, date code, market availability, and supply status. The form allows the exact MPN and required quantities to be included in the inquiry, avoiding ambiguity with other ADSP-SC571 package or ordering-code variants.
What is the lead time for ADSP-SC571CSWZ-3?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, procurement schedule, packaging, and market supply. Include your required quantity, target date, delivery location, and approved-source requirements in the request so procurement can confirm the most relevant commitment for the ADSP-SC571CSWZ-3.
Is ADSP-SC571CSWZ-3 in stock?
Check current availability by submitting the exact ADSP-SC571CSWZ-3 MPN through the Request a Quote form on this page. Inventory status should be confirmed for the requested quantity and packaging configuration before committing a build schedule. The manufacturer lists the ADSP-SC571CSWZ-3 as an active product, but project-specific availability still requires a supply confirmation.
What can replace ADSP-SC571CSWZ-3?
The closest same-footprint replacement candidates are other verified ADSP-SC571 ordering variants that retain the 176-LQFP exposed-pad layout, including ADSP-SC571BSWZ-3 and ADSP-SC571CSWZ-5. Their grade codes must be checked against temperature, qualification, and firmware requirements before substitution. No cross-manufacturer processor was confirmed as pin-compatible, so a board redesign is required when changing processor vendors.
Is ADSP-SC571CSWZ-3 the same as ADSP-SC571BSWZ-3?
ADSP-SC571CSWZ-3 and ADSP-SC571BSWZ-3 share the 176-LQFP exposed-pad package and 300 MHz dual-SHARC+ processor architecture, but their ordering codes identify different product grades. The 300 MHz core frequency is unchanged, while the grade designation affects the exact environmental or qualification requirements. Confirm the ordering-code definition in the manufacturer product table before treating the B and C variants as interchangeable.
What is the best cross-brand equivalent for ADSP-SC571CSWZ-3?
No cross-brand, pin-compatible drop-in equivalent was confirmed for the ADSP-SC571CSWZ-3. Its combination of two SHARC+ cores, ARM Cortex-A5 control core, memory architecture, boot environment, peripherals, and 176-LQFP exposed-pad pinout is highly vendor-specific. An alternative DSP may provide similar signal-processing capability, but it should be treated as a redesign unless its complete electrical interface, software, and pin definitions are proven equivalent.
When should I choose ADSP-SC571CSWZ-3 instead of another ADSP-SC571 variant?
Choose ADSP-SC571CSWZ-3 when the design requires the -3 ordering configuration, a -40°C to 100°C ambient range, two 300 MHz SHARC+ cores, an ARM Cortex-A5 core, and the 176-LQFP exposed-pad footprint. Compare other ADSP-SC571 variants only when their grade code changes temperature limits, qualification, or ordering eligibility in a way that materially benefits the product. Software and peripheral behavior may remain closely related, but board production should follow the exact selected MPN.
ADSP-SC571CSWZ-3 vs ADSP-SC571CSWZ-5: which is better?
ADSP-SC571CSWZ-3 and ADSP-SC571CSWZ-5 share the ADSP-SC571 architecture, 300 MHz processing rate, and 176-LQFP exposed-pad format, while their grade codes differ. ADSP-SC571CSWZ-3 is identified with a -40°C to 100°C operating range, making it appropriate for many industrial environments. Select the -5 variant only when its documented grade and environmental requirements better match the target product qualification and operating conditions.

داده‌های مرجع مهندسی برای ADSP-SC571CSWZ-3 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ADSP-SC571CSWZ-3 when the product requires two 300 MHz SHARC+ DSP cores, an ARM Cortex-A5 control core, approximately 1.768 MB of on-chip RAM, and a -40°C to 100°C ambient range in a 176-LQFP exposed-pad package. ADSP-SC571BSWZ-3 can serve as a same-footprint planning alternative when the B grade better matches qualification requirements. ADSP-SC571CSWZ-5, ADSP-SC571BSWZ-5, ADSP-SC571BSWZ-2, and ADSP-SC571CSWZ-2 are same-family ordering alternatives whose grade codes must be checked against environmental and qualification needs. No cross-brand drop-in replacement was confirmed because the core architecture, peripheral set, memory interface, software environment, and pinout are tightly integrated. If the exact -3 grade is approved and available, retaining it generally minimizes software, qualification, and board-qualification risk.

مقایسه با جایگزین‌ها

پارامتر این محصول ADSP-SC571BSWZ-3 ADSP-SC571CSWZ-5 ADSP-SC571BSWZ-5 ADSP-SC571BSWZ-2 ADSP-SC571CSWZ-2
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 176-LQFP exposed-pad, 24 x 24 mm 176-LQFP exposed-pad, 24 x 24 mm 176-LQFP exposed-pad, 24 x 24 mm 176-LQFP exposed-pad, 24 x 24 mm 176-LQFP exposed-pad, 24 x 24 mm 176-LQFP exposed-pad, 24 x 24 mm
DSP Core Count 2 SHARC+ cores 2 SHARC+ cores 2 SHARC+ cores 2 SHARC+ cores 2 SHARC+ cores 2 SHARC+ cores
DSP Clock Rate 300 MHz per SHARC+ core 300 MHz per SHARC+ core 300 MHz per SHARC+ core 300 MHz per SHARC+ core 300 MHz per SHARC+ core 300 MHz per SHARC+ core
Control Processor ARM Cortex-A5 ARM Cortex-A5 ARM Cortex-A5 ARM Cortex-A5 ARM Cortex-A5 ARM Cortex-A5
L1 Memory 768 KB per SHARC+ core 768 KB per SHARC+ core 768 KB per SHARC+ core 768 KB per SHARC+ core 768 KB per SHARC+ core 768 KB per SHARC+ core
Shared L2 Memory 1 MB 1 MB 1 MB 1 MB 1 MB 1 MB
Ethernet 10/100 Ethernet 10/100 Ethernet 10/100 Ethernet 10/100 Ethernet 10/100 Ethernet 10/100 Ethernet
Ordering Grade C grade, -3 B grade, -3 C grade, -5 B grade, -5 B grade, -2 C grade, -2

تفاوت‌های کلیدی

  • Three-core heterogeneous processing architecture (در مقابلADSP-SC571BSWZ-3)
  • Documented -40°C to 100°C ambient operation (در مقابلADSP-SC571CSWZ-5)
  • Broad integrated communications and control interface set (در مقابلADSP-CM408BSWZ-AF)

یادداشت‌های طراحی

Treat the exposed pad as both an electrical connection and a primary thermal path. Follow the manufacturer land-pattern guidance and place multiple ground vias within or immediately beneath the exposed-pad area while maintaining clearance from sensitive routing. Monitor junction temperature under worst-case simultaneous SHARC+ activity, external-memory traffic, Ethernet activity, and elevated ambient temperature. A large uninterrupted ground plane generally improves heat spreading, but the final via arrangement must also comply with the package drawing and assembly requirements.

Separate the processor's high-speed memory and Ethernet routing from switching supplies, inductors, and digital clocks. Route memory interfaces over a continuous reference plane, keep via transitions symmetric where practical, and preserve the manufacturer-defined keepouts around clock, power, and exposed-pad connections. Place input and output decoupling close to the associated pins, with the smallest capacitance values serving the highest-frequency transient demands. Validate the final layer stack and interface timing using the manufacturer hardware design guide.

Design the core and I/O supplies independently so that processor activity does not disturb clocking, Ethernet, external memory, or sensitive converters. Verify startup sequencing, current limits, voltage tolerances, and power-supply droop at the package pins rather than relying only on load-current estimates. External memory transients can coincide with DSP bursts, so include adequate local bulk capacitance and verify that the selected memory and PHY devices remain stable under the processor's worst-case operating pattern.

Do not substitute the processor solely because two ordering codes share the same 176-LQFP body. Confirm the grade definition, temperature range, qualification status, boot configuration, supported firmware, and exact package drawing before releasing a replacement. Also avoid assuming that the exposed pad can be connected arbitrarily: use the manufacturer-prescribed ground and via pattern. A software image built for one supported processor grade should be deployed only after Analog Devices confirms its applicability to the selected ordering code.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The ADSP-SC571CSWZ-3 is listed as active. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the available product information. The -3 ordering-code qualification should be confirmed with Analog Devices before selecting a grade for regulated production.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ADSP-SC571CSWZ-3 ADSP-SC571CSWZ-3 datasheet ADSP-SC571CSWZ-3 datasheet pdf ADSP-SC571CSWZ-3 pinout ADSP-SC571CSWZ-3 specifications ADSP-SC571CSWZ-3 replacement ADSP-SC571CSWZ-3 equivalent ADSP-SC571CSWZ-3 cross reference ADSP-SC571CSWZ-3 footprint ADSP-SC571CSWZ-3 price ADSP-SC571CSWZ-3 stock Analog Devices ADSP-SC571CSWZ-3 ADSP-SC571CSWZ-3 vs ADSP-SC571CSWZ-5 176-LQFP ADSP-SC571 pinout ADSP-SC571 industrial Ethernet DSP

قطعات و اصطلاحات مرتبط

Analog Devices ADSP-SC571CSWZ-3 ADSP-SC571BSWZ-3 ADSP-SC571CSWZ-5 ADSP-SC571BSWZ-5 ADSP-SC571BSWZ-2 ADSP-SC571CSWZ-2 ADSP-SC573 ADZS-SC573-EZLITE SHARC+ ARM Cortex-A5 digital signal processor DSP fixed-point arithmetic floating-point arithmetic heterogeneous processor 176-LQFP exposed-pad package LQFP surface-mount package 768 KB L1 memory 1 MB shared L2 cache 1.768 MB on-chip RAM 10/100 Ethernet industrial Ethernet real-time signal processing industrial control USB OTG CAN SPI I2C SPORT UART/USART DAI EBI/EMI MMC/SD/SDIO motor control machine vision test and measurement
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ