ADSP-SC571KSWZ-3 - Dual-Core SHARC+ DSP | Analog Devices
MPN: ADSP-SC571KSWZ-3 ✓ فعالADSP-SC571KSWZ-3 نمای کلی
A digital signal processor is a specialized semiconductor that executes filtering, modulation, FFT, waveform-generation, and control algorithms efficiently. The ADSP-SC571 belongs to the SHARC processor hierarchy and adds heterogeneous processing through the SHARC+ and Arm Cortex-A5 cores. This architecture separates real-time signal-processing workloads from control-plane or network-oriented software, allowing concurrent execution without requiring multiple discrete processors.
Key features include two SHARC+ processing cores, an Arm Cortex-A5 core, parallel data channels, DMA data transfer, zero-overhead looping, circular-buffer support, and cooperative multicore processing. The processor also provides interfaces for Ethernet, CAN, I2C, SPI, SPORT, UART/USART, USB OTG, external bus interfaces, digital audio, and ADC/DAC integration. Secure storage and protection capabilities support connected industrial and communications equipment.
The SHARC+ architecture uses a single-instruction, multiple-data-oriented execution model optimized for real-time signal processing. Fixed-point and floating-point pipelines can handle high-throughput filtering and spectral analysis, while the shared cache and coherent interconnect support coordinated access to memory. The Arm Cortex-A5 core supports supervisory software, networking stacks, control functions, and external interfaces, providing a more conventional processor environment for system-level tasks.
Typical applications include industrial Ethernet gateways, audio and media processing, communications infrastructure, motor and motion control, instrumentation, and embedded network equipment. The 10/100 Ethernet interface is particularly useful when a system must acquire or transport real-time data without requiring a separate network controller. The integrated ADC interface and digital audio interfaces can also simplify signal-chain designs that otherwise need multiple external components.
PCB implementation requires careful attention to the exposed thermal pad, multilayer-board thermal design, high-speed clock routing, decoupling, and differential or high-speed interface layout. The exposed pad should be connected to the appropriate ground plane with multiple short thermal vias, while sensitive analog, digital, and power-return paths should be separated where the board stackup permits. Firmware, bootloader, Ethernet driver, and board-support decisions must be evaluated before committing to the processor platform.
This product page combines manufacturer architecture information with distributor availability, package details, cache configuration, interface coverage, and engineering-oriented replacement analysis. It also organizes the available pin-compatible ADSP-SC571 ordering variants so design teams can distinguish clock-grade, temperature-grade, and package-footprint considerations before schematic capture.
جایگزینهای drop-in برای ADSP-SC571KSWZ-3 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ADSP-SC571KSWZ-3 (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Maximum Clock Frequency, Processor Type, Control Core, Product Type.
ADSP-SC571BSWZ-3
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ADSP-SC571CSWZ-3
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ADSP-SC571ASWZ-3
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ADSP-SC571JSWZ-3
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ADSP-SC571KSWZ-3 مشخصات
| Processor Type | Fixed/Floating Point Digital Signal Processor |
| SHARC+ Core Count | 2 cores |
| Arm Core | 1 Arm Cortex-A5 core |
| حداکثر فرکانس کلاک | 300 MHz |
| L1 Cache | 768 KB |
| Shared L2 Cache | 1 MB |
| Ethernet | 10/100 Ethernet |
| بستهبندی | 176-LQFP-EP, 24 mm x 24 mm |
| نوع نصب | Surface Mount |
| Parallel Data Channel | Supported |
| DMA | Supported |
| High-Speed Peripheral Interface | Supported |
| Integrated ADC Interface | Supported |
| Zero-Overhead Loop | Supported |
| Circular Buffer | Supported |
| Multicore Processing | Multi-core cooperative processing |
| Secure Storage and Protection | Supported |
راهنمای پیکربندی پین ADSP-SC571KSWZ-3 176-lqfp-ep, 24 mm x 24 mm
پیکربندی پین برای ADSP-SC571KSWZ-3 (پکیج 176-lqfp-ep, 24 mm x 24 mm). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای ADSP-SC571KSWZ-3.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ADSP-SC571KSWZ-3 مناسب است برای 6 کاربردs: Industrial Ethernet Gateway, Audio Signal Processing, Industrial Motor Control, Instrumentation and Test Equipment, Communications Infrastructure, Connected Sensor Node.
Industrial Ethernet Gateway
The ADSP-SC571KSWZ-3 is well suited to an industrial Ethernet gateway because it combines integrated 10/100 Ethernet with two 300 MHz SHARC+ cores and an Arm Cortex-A5 core. Real-time streams can be processed on the SHARC+ side while the Arm core manages protocol software, device management, and control tasks. DMA, parallel data channels, and circular buffers help move sampled data without excessive processor intervention. Using the integrated Ethernet interface can also reduce board complexity compared with a processor-only design that requires a separate network controller.
پیشنهادی
Audio Signal Processing
The ADSP-SC571KSWZ-3 can implement demanding audio pipelines because its two SHARC+ cores operate at 300 MHz and support fixed-point as well as floating-point arithmetic. The processor's zero-overhead loops, circular-buffer support, DMA channels, and integrated ADC interface are useful for continuous sampling, filtering, mixing, and spectral processing. The Arm Cortex-A5 core can handle configuration and supervisory functions while the SHARC+ cores execute latency-sensitive DSP tasks, allowing a unified implementation for audio gateways, conferencing equipment, and professional sound systems.
پیشنهادی
Industrial Motor Control
The ADSP-SC571KSWZ-3 fits industrial motor-control systems that require deterministic signal analysis alongside network management. Two 300 MHz SHARC+ cores can execute feedback algorithms, transformations, and other time-critical computations, while the Arm Cortex-A5 core can run higher-level control and communications software. Its DMA and parallel data channels support high-rate sensor ingestion and actuator data movement. For servo drives and condition-monitoring equipment, this mixed architecture can consolidate real-time control and connectivity without requiring separate processors.
پیشنهادی
Instrumentation and Test Equipment
The ADSP-SC571KSWZ-3 can serve as the real-time processing core in measurement instruments because its two SHARC+ cores support parallel numerical work at 300 MHz. The architecture is suitable for waveform acquisition, digital filtering, calibration routines, FFT-based analysis, and complex sensor fusion. Integrated ADC interfaces and DMA reduce the processing burden associated with continuous data transfer, while the Arm Cortex-A5 core supports user-interface logic, remote control, and data handling. The processor's serial interfaces also allow connection to displays, storage devices, and external converters.
پیشنهادی
Communications Infrastructure
The ADSP-SC571KSWZ-3 is applicable to communications infrastructure equipment that must combine network connectivity with real-time baseband or packet processing. Its integrated 10/100 Ethernet interface supports network attachment, while dual SHARC+ cores can accelerate filtering, transforms, modulation support, and traffic processing. The Arm Cortex-A5 core is suited to protocol stacks and operating-system functions, creating a cooperative processing environment. Cooperative multicore support, secure storage, DMA, and configurable serial interfaces strengthen the fit for gateways, protocol converters, and embedded communications nodes.
پیشنهادی
Connected Sensor Node
The ADSP-SC571KSWZ-3 can support connected sensor nodes that perform local analysis before transmitting results over Ethernet. Two 300 MHz SHARC+ cores can execute filters, feature extraction, and event-detection algorithms close to the sensor source, while the Cortex-A5 core manages network traffic, configuration, and device management. DMA and circular buffers help sustain continuous sensor acquisition, and secure storage provides a basis for protecting configuration data and code. This division of labor makes the processor appropriate for smart industrial sensing and edge-processing systems.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ADSP-SC571KSWZ-3 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ADSP-SC571BSWZ-3 | ADSP-SC571CSWZ-3 | ADSP-SC571ASWZ-3 | ADSP-SC571JSWZ-3 |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 176-LQFP-EP (24x24) | 176-LQFP-EP (24x24) | 176-LQFP-EP (24x24) | 176-LQFP-EP (24x24) | 176-LQFP-EP (24x24) |
| Maximum Clock Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
| Processor Family | ADSP-SC571 | ADSP-SC571 | ADSP-SC571 | ADSP-SC571 | ADSP-SC571 |
| Processor Type | Fixed/Floating Point DSP | Fixed/Floating Point DSP | Fixed/Floating Point DSP | Fixed/Floating Point DSP | Fixed/Floating Point DSP |
| Ethernet | 10/100 Ethernet | 10/100 Ethernet | 10/100 Ethernet | 10/100 Ethernet | 10/100 Ethernet |
| Core Configuration | Dual SHARC+ plus Arm Cortex-A5 | Dual SHARC+ plus Arm Cortex-A5 | Dual SHARC+ plus Arm Cortex-A5 | Dual SHARC+ plus Arm Cortex-A5 | Dual SHARC+ plus Arm Cortex-A5 |
| Grade Code | K | B | C | A | J |
| Ordering Suffix | -3 | -3 | -3 | -3 | -3 |
تفاوتهای کلیدی
- Integrated network connectivity reduces processor-board complexity (در مقابلADSP-SC571BSWZ-3)
- Three-core heterogeneous processing architecture (در مقابلADSP-SC571CSWZ-3)
- Deterministic real-time data movement (در مقابلADSP-SC571ASWZ-3)
- Package-compatible family substitution path (در مقابلADSP-SC571JSWZ-3)
یادداشتهای طراحی
Treat the exposed pad as a required thermal and electrical structure rather than an optional bottom feature. Connect it to the designated ground plane with multiple short vias placed within the manufacturer-recommended land pattern, and provide uninterrupted copper beneath the package where the board design permits. Use the datasheet thermal model and actual board stackup to estimate junction temperature; processor activity, Ethernet operation, I/O loading, and ambient temperature all affect the result.
Route clocks and high-speed signals on controlled-impedance layers with short returns and minimal vias. Separate switching supplies, high-current Ethernet routing, clock distribution, and sensitive analog inputs to minimize coupling into the processor and integrated converters. Match interface topology and impedance to the Analog Devices hardware-design guidance for the selected Ethernet, USB, serial, and memory connections. Validate the final layer stack with the board manufacturer before high-volume production.
Partition the processor rails according to the manufacturer power-supply and decoupling recommendations, including any required sequencing between core, I/O, and external peripherals. Place bulk and high-frequency decoupling capacitors at the relevant power pins with short ground paths, and verify capacitor voltage and DC-bias derating. Do not infer permissible rail tolerances from the processor clock rating; use the electrical-characteristics tables for nominal, minimum, and maximum supply requirements.
A shared package does not by itself guarantee that every ADSP-SC571 ordering grade is a production substitute. Confirm boot configuration, clock options, pin multiplexing, voltage limits, temperature range, qualification requirements, and firmware support for each alternate MPN. The -3 ordering suffix identifies a processor speed class, while the middle grade code can carry distinct environmental or qualification requirements; review both before changing the BOM.
اطلاعات انطباق
Compliance was not explicitly stated in the manufacturer or distributor results. The ordering-grade requirements must be checked in the official ADSP-SC571 documentation before production release.