Microchip Technology

AT91SAM7L64-CU 36MHz ARM7 SAM7L 64KB Flash MCU | Microchip

MPN: AT91SAM7L64-CU ✓ فعال
2.5 V to 3.3 V Vdss 144-BGA (13 x 13 mm) Package 36 MHz Speed 64 KB Memory
حداقل سفارش: 1 |

AT91SAM7L64-CU نمای کلی

Microchip AT91SAM7L64-CU is a 16/32-bit ARM7 SAM7L microcontroller operating at 36 MHz with 64 KB of embedded Flash memory and 6 KB of SRAM, housed in a 144-BGA package measuring 13 x 13 mm. It is designed for compact embedded control systems requiring low-power operation, integrated serial interfaces, and a broad set of GPIO and peripheral resources.

The SAM7L family is an ARM Thumb-based microcontroller family intended for industrial, communications, consumer, and embedded control applications. The AT91SAM7L64-CU combines an ARM7TDMI processor with on-chip flash and SRAM, allowing firmware, configuration data, and application logic to be integrated into a compact device. Its 36 MHz operating frequency supports deterministic control and communication tasks while keeping the system footprint small.

Key characteristics include a 144-BGA package, 64 KB of Flash memory, 6 KB of RAM, and operation from a 2.5 V or 3.3 V supply, depending on the product configuration and operating condition. The device also provides a range of embedded resources commonly used in control products, including serial communication peripherals, timer and counter functions, and general-purpose input/output. These resources make the MCU suitable for connected peripherals, industrial controllers, interface modules, and compact embedded products.

The ARM7TDMI architecture uses a 32-bit instruction set with Thumb instruction support for code-density-oriented embedded applications. Flash memory supports in-system program updates when the application permits, while the integrated SRAM provides working memory for stacks, buffers, protocol handlers, and control algorithms. Peripheral integration reduces the number of external components needed for a basic control design and helps simplify PCB layout in space-constrained products.

Typical applications include industrial monitoring equipment, communications interfaces, embedded control modules, consumer peripherals, and compact automated products. Designers should confirm the exact peripheral set, pin multiplexing, electrical limits, and package dimensions against the manufacturer datasheet before finalizing a PCB layout. The 144-BGA package also requires careful escape-routing planning and adequate manufacturing capability.

For new designs, the AT91SAM7L64-CU should be selected when a compact ARM7 MCU with integrated Flash and SRAM is required. For an existing design, verify software compatibility, memory requirements, peripheral assignments, and timing behavior before substituting another controller. This product page combines the available technical specifications, sourcing information, application guidance, and design considerations into a concise engineering reference.

جایگزین‌های drop-in برای AT91SAM7L64-CU — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

AT91SAM7L128-CU

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 144-BGA (13 x 13 mm)
Flash increases from 64 KB to 128 KB (+100%); CPU speed and package remain comparable

📋 جایگزین مرجع (خارج از کاتالوگ)

AT91SAM7L256-CU

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 144-BGA (13 x 13 mm)
Flash increases from 64 KB to 256 KB (+300%); CPU speed and package remain comparable

📋 جایگزین مرجع (خارج از کاتالوگ)

AT91SAM7X128-CU

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 144-BGA (13 x 13 mm)
Flash increases from 64 KB to 128 KB (+100%) and SAM7X peripherals differ from SAM7L

📋 جایگزین مرجع (خارج از کاتالوگ)

AT91SAM7X256-CU

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 144-BGA (13 x 13 mm)
Flash increases from 64 KB to 256 KB (+300%) and SAM7X peripherals differ from SAM7L

📋 جایگزین مرجع (خارج از کاتالوگ)

AT91SAM7X512-CU

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 144-BGA (13 x 13 mm)
Flash increases from 64 KB to 512 KB (+700%) and SAM7X peripherals differ from SAM7L

📋 جایگزین مرجع (خارج از کاتالوگ)

AT91SAM7L64-CU حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type ARM7 SAM7L Microcontroller
Architecture ARM7TDMI with Thumb support
Instruction Set 16/32-bit
حداکثر فرکانس کلاک 36 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
SRAM 6 KB
ولتاژ تغذیه 2.5 V to 3.3 V
بسته‌بندی 144-BGA (13 x 13 mm)
نوع نصب Surface Mount
Temperature Grade Industrial temperature grade
Series SAM7L
Core ARM7TDMI
Manufacturer Microchip Technology
Green Compliance Green
Datasheet Package Description 144-LFBGA

راهنمای پیکربندی پین AT91SAM7L64-CU 144-lfbga

پیکربندی پین برای AT91SAM7L64-CU (پکیج 144-lfbga). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 144-lfbga برای AT91SAM7L64-CU

داده پین‌آوت تفصیلی موجود نیست برای AT91SAM7L64-CU.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

AT91SAM7L64-CU مناسب است برای 6 کاربردs: Industrial Monitoring and Control, Communications Interface Module, Compact Embedded Control Product, Consumer Peripheral and Interface Device, Data Acquisition Front End, Legacy Control-System Refresh.

🏭

Industrial Monitoring and Control

The AT91SAM7L64-CU suits compact monitoring equipment that samples sensors, evaluates operating conditions, and controls local outputs. Its 36 MHz ARM7TDMI core provides more processing headroom than a simple state-machine controller, while 64 KB of Flash accommodates application firmware and 6 KB of SRAM supports protocol buffers and control variables. The industrial-temperature identification supports use in enclosed equipment where moderate thermal conditions are expected. Use the integrated timers and GPIO for acquisition timing and actuator control, while confirming peripheral multiplexing and electrical limits in the manufacturer datasheet before final PCB assignment.

🌐

Communications Interface Module

The AT91SAM7L64-CU can serve as the controller in a compact communications interface where protocol processing, status reporting, and local configuration must coexist. The 36 MHz ARM7 core supports responsive handling of serial traffic, and the 64 KB Flash capacity is suitable for embedded protocol code plus configuration storage. Its 6 KB of SRAM can hold receive and transmit buffers, although protocol-specific sizing must be checked during design. The 144-BGA footprint also helps limit board area in gateways or embedded communication accessories, provided the PCB has adequate BGA routing and assembly capability.

🔧

Compact Embedded Control Product

AT91SAM7L64-CU is appropriate for compact embedded products that combine local control, user interaction, and supervisory communications. The ARM7TDMI processor executes application logic at up to 36 MHz, while integrated Flash and SRAM avoid the need for external memory in moderate-complexity designs. GPIO, timers, and serial functions support key scanning, actuator timing, status indication, and external communications. Because the MCU uses a 13 x 13 mm 144-BGA package, designers should balance its small footprint against the complexity of escape routing and should follow the datasheet land pattern exactly.

📱

Consumer Peripheral and Interface Device

The AT91SAM7L64-CU can implement a small consumer peripheral that needs local logic, persistent firmware, and communication with a host system. Its 36 MHz ARM7TDMI core is suitable for responsive command handling, and 64 KB of Flash provides room for a complete embedded application without an external memory device. The microcontroller is useful where product size, low component count, and established ARM7 software support matter more than adoption of a newer high-performance core. Validate EMC, ESD, accessibility, and production-test requirements for the final enclosure and external interfaces.

🖥️

Data Acquisition Front End

AT91SAM7L64-CU is well matched to acquisition front ends that must coordinate sensors, timing, and host data transfer. Its 36 MHz core can execute sampling orchestration and buffering logic, while 6 KB of SRAM accommodates short working buffers before data is transferred or stored. The available GPIO and timer resources support trigger inputs, status LEDs, and peripheral control. Exact ADC capabilities, timer channels, and interrupt priorities must be checked in the complete manufacturer datasheet because the target device's published listing emphasizes its processor, memory, voltage, speed, and package rather than individual peripheral ratings.

🏭

Legacy Control-System Refresh

The AT91SAM7L64-CU can serve as a continuity choice when maintaining an ARM7 SAM7L-based control platform. Retaining the device limits changes to software, board interfaces, and qualification when the existing 36 MHz processing rate, 64 KB Flash, and 6 KB SRAM remain adequate. This is particularly useful for industrial equipment, interface modules, and specialized peripherals that have mature firmware. A replacement program should begin with a complete peripheral and pin-level review rather than relying only on processor speed or package dimensions, because architecture, interrupt behavior, peripherals, and memory organization affect software compatibility.

What is the Microchip AT91SAM7L64-CU?
The Microchip AT91SAM7L64-CU is a 16/32-bit ARM7 SAM7L microcontroller with a 36 MHz maximum clock, 64 KB of Flash memory, and 6 KB of SRAM in a 144-BGA package. According to the manufacturer-related product information, it uses an ARM7TDMI core and is designed for compact embedded control systems requiring integrated memory, serial peripherals, timers, and GPIO resources. Its 13 x 13 mm BGA package supports space-constrained industrial, communications, and consumer equipment.
What are the key specifications of AT91SAM7L64-CU that engineers should know?
The AT91SAM7L64-CU combines a 36 MHz ARM7TDMI core, 64K x 8-bit Flash, 6 KB SRAM, a 2.5 V to 3.3 V supply range, and a 144-BGA package measuring 13 x 13 mm. The manufacturer-related product information identifies it as a 16/32-bit SAM7L industrial-temperature microcontroller. These figures define its core performance, memory limits, power domain, and PCB land-pattern requirements for new designs.
What is the operating voltage of AT91SAM7L64-CU?
The AT91SAM7L64-CU operates from a 2.5 V to 3.3 V supply according to the available manufacturer-related specifications. The device includes an ARM7TDMI core, 64 KB of Flash, and 6 KB of SRAM. Before implementation, verify the exact operating limits, decoupling requirements, and I/O voltage relationships in the manufacturer datasheet, particularly for mixed-voltage peripherals.
How much memory does the AT91SAM7L64-CU have?
The AT91SAM7L64-CU contains 64 KB of Flash memory organized as 64K x 8 bits and 6 KB of SRAM. The manufacturer-related product information identifies the device as a 36 MHz SAM7L microcontroller. The Flash store supports firmware and nonvolatile data, while SRAM provides working memory for stacks, buffers, communication handlers, and real-time control routines.
What package does the AT91SAM7L64-CU use?
The AT91SAM7L64-CU is supplied in a 144-BGA package measuring 13 x 13 mm, also described in the available product information as a 144-LFBGA. The BGA construction reduces board area compared with a leaded package but requires fine-pitch routing and a manufacturing process capable of handling the land pattern. Use the package drawing and pin-definition tables for layout.
Where can I find the AT91SAM7L64-CU pinout?
The AT91SAM7L64-CU pinout is found in the package drawing and pin-description tables in the manufacturer datasheet. The available product page confirms a 144-BGA package, but it does not provide a complete numbered pin list suitable for reproducing the package diagram. Use the datasheet pin table to assign power, ground, reset, debug, peripheral, and GPIO functions before routing the board.
Where can I download the AT91SAM7L64-CU datasheet PDF?
The AT91SAM7L64-CU datasheet PDF can be reached through the product's datasheet listing and from the manufacturer documentation archive. The available results identify the document as the ATMEL AT91SAM7L64-CU data sheet and describe it as a 48-page document. Download the manufacturer document and confirm its revision before using electrical limits, timing, or pin information in a production design.
What can replace the AT91SAM7L64-CU?
A drop-in replacement for the AT91SAM7L64-CU must use the same 144-BGA 13 x 13 mm footprint and remain pin-to-pin compatible at the software and peripheral levels. The available cross-reference results identify comparable devices but do not establish five qualified same-footprint substitutes. Treat another microcontroller as a redesign candidate unless its datasheet, pin table, memory map, peripheral assignments, and electrical characteristics have all been verified.
Is the AT91SAM7L64-CU the same as an STM32L151 controller?
No. The AT91SAM7L64-CU uses a 36 MHz ARM7TDMI core with 64 KB of Flash in a 144-BGA package, while the compared STM32L151 options use a different MCU architecture and package. They may serve similar embedded-control roles, but the processor core, memory map, peripherals, software ecosystem, and footprint differ. A board change and firmware review are required before substitution.
AT91SAM7L64-CU versus EFM32WG295F64-BGA120T: which is better for a new design?
The AT91SAM7L64-CU is preferable when an existing design requires the SAM7L architecture, 36 MHz ARM7TDMI performance, 64 KB of Flash, and a 144-BGA footprint. The EFM32WG295F64-BGA120T is a different 120-BGA device with its own core, peripherals, and software ecosystem, so it is not a drop-in match. For a new design, choose according to application requirements and perform a complete hardware and firmware comparison.
When should I choose the AT91SAM7L64-CU over another MCU?
Choose the AT91SAM7L64-CU when preserving an ARM7 SAM7L design is valuable, the 36 MHz operating point is sufficient, and the 144-BGA 13 x 13 mm package fits the mechanical plan. Its 64 KB of Flash and 6 KB of SRAM make it appropriate for compact embedded-control tasks. Select a newer MCU instead when the legacy peripheral set, software ecosystem, or package escape-routing burden outweigh compatibility benefits.
Is the AT91SAM7L64-CU suitable for industrial control applications?
The AT91SAM7L64-CU is identified as an industrial-temperature SAM7L microcontroller with a 36 MHz ARM7TDMI core, 64 KB of Flash, and 6 KB of SRAM. It can serve industrial control, monitoring, communications, and compact interface applications where those resources are adequate. Validate temperature behavior, EMC requirements, peripheral timing, and long-term availability against the complete system requirements.
Where can I buy AT91SAM7L64-CU online?
Use the Request a Quote form on this page to request current AT91SAM7L64-CU availability, lead time, and ordering information. The verified product listings confirm exact-MPN availability references and identify the part as a Microchip Technology 36 MHz, 64 KB Flash, 144-BGA microcontroller. The Request a Quote workflow provides a current response without embedding a static price that may change.
What is the price of the AT91SAM7L64-CU?
Current AT91SAM7L64-CU price and quantity availability should be requested through the Request a Quote form on this page. The available product listings do not print qualifying quantity-break prices for this exact MPN, so no static price figure is stated. The form lets you confirm unit pricing, order multiples, current inventory, and shipping requirements for the 144-BGA package.
What is the lead time and stock status for AT91SAM7L64-CU?
Request the current lead time and stock status for AT91SAM7L64-CU using the Request a Quote form on this page. The verified listings describe the part as available for ordering, but they do not provide a stable stock quantity or guaranteed delivery interval. A current quotation is appropriate for production planning, especially when validating the exact 144-BGA ordering code and reel or tray requirements.
Does the AT91SAM7L64-CU meet RoHS and AEC-Q100 requirements?
The available product information identifies the AT91SAM7L64-CU as a green industrial-temperature component, but it does not explicitly state RoHS, REACH, AEC-Q100, lead-free, or conflict-minerals status. Those compliance fields therefore remain unknown. Request the current manufacturer declarations or material compliance documentation before using the part in regulated consumer, automotive, or export-controlled production.

داده‌های مرجع مهندسی برای AT91SAM7L64-CU — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the AT91SAM7L64-CU when an existing ARM7 SAM7L platform must be maintained, its 36 MHz processing rate is sufficient, and the 64 KB Flash and 6 KB SRAM meet application needs. Its 144-BGA package is appropriate for compact boards with mature BGA assembly capability. Select another MCU for a new platform only after comparing processor architecture, peripheral set, memory map, software tools, electrical characteristics, and footprint; similar advertised Flash capacity is not evidence of drop-in compatibility. For legacy refreshes, retaining the MCU reduces firmware and board risk. For new designs without an established codebase, a newer family may offer a longer roadmap, denser pinout, or simpler assembly, but it represents a deliberate redesign rather than a replacement.

مقایسه با جایگزین‌ها

پارامتر این محصول
Package 144-BGA (13 x 13 mm)
Brand Microchip Technology
Core ARM7TDMI
Maximum Clock Frequency 36 MHz
Flash Memory 64 KB
SRAM 6 KB
Supply Voltage 2.5 V to 3.3 V
Temperature Grade Industrial
Instruction Set 16/32-bit with Thumb support
Mounting Type Surface Mount

یادداشت‌های طراحی

Plan the 144-BGA escape routing before committing the board outline. Maintain the datasheet land pattern, solder-mask and copper-pad definitions, and package-specific assembly allowances. Route high-speed or sensitive signals as required by the complete peripheral list, and provide adequate via access beneath the device for inspection and rework. A compact 13 x 13 mm footprint does not eliminate the manufacturing complexity of a 144-ball package.

Design the 2.5 V or 3.3 V supply network around the exact operating configuration confirmed in the manufacturer datasheet. Place required bulk and decoupling capacitance close to the associated power and ground balls, and provide clean return paths beneath active circuitry. Review all peripheral I/O voltage limits before connecting external signals, particularly where 5 V tolerance or mixed-voltage interfaces are relevant.

Do not select a replacement based only on clock speed, Flash capacity, or package dimensions. The ARM7TDMI core, peripheral mapping, interrupt architecture, memory organization, boot behavior, and development-tool support must also match the firmware and PCB. For legacy designs, perform GPIO, UART, timer, debug, reset, and power-ball comparisons against the official pin table before releasing a substitute to production.

Route clocks, reset, debug signals, and communication interfaces away from noisy switching nodes and maintain continuous ground references beneath their paths. Use the manufacturer’s recommended external component values for oscillators, reset circuitry, and interface support components. If the MCU operates near high-current switching converters, verify return-current paths and supply-noise sensitivity in system-level testing rather than relying only on schematic connectivity.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The product listing identifies the component as green and industrial-temperature grade but does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance. Current manufacturer declarations should be obtained before regulated production release.

جستجوهای مرتبط

AT91SAM7L64-CU datasheet AT91SAM7L64-CU specifications AT91SAM7L64-CU pinout AT91SAM7L64-CU datasheet PDF AT91SAM7L64-CU 144 BGA Microchip AT91SAM7L64-CU AT91SAM7L64-CU equivalent AT91SAM7L64-CU replacement AT91SAM7L64-CU cross reference AT91SAM7L64-CU price AT91SAM7L64-CU stock AT91SAM7L64-CU application circuit AT91SAM7L64-CU ARM7TDMI AT91SAM7L64-CU 36 MHz 64KB

قطعات و اصطلاحات مرتبط

Microchip Technology AT91SAM7L64-CU SAM7L ARM7TDMI ARM7 Thumb instruction set microcontroller embedded processor integrated circuit semiconductor 36 MHz 64 KB Flash 6 KB SRAM 144-BGA 13 x 13 mm package BGA surface mount 2.5 V 3.3 V industrial microcontroller industrial control communications interface data acquisition GPIO serial peripheral
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ