AT91SAM7L64-CU 36MHz ARM7 SAM7L 64KB Flash MCU | Microchip
MPN: AT91SAM7L64-CU ✓ ActiveAT91SAM7L64-CU Overview
The SAM7L family is an ARM Thumb-based microcontroller family intended for industrial, communications, consumer, and embedded control applications. The AT91SAM7L64-CU combines an ARM7TDMI processor with on-chip flash and SRAM, allowing firmware, configuration data, and application logic to be integrated into a compact device. Its 36 MHz operating frequency supports deterministic control and communication tasks while keeping the system footprint small.
Key characteristics include a 144-BGA package, 64 KB of Flash memory, 6 KB of RAM, and operation from a 2.5 V or 3.3 V supply, depending on the product configuration and operating condition. The device also provides a range of embedded resources commonly used in control products, including serial communication peripherals, timer and counter functions, and general-purpose input/output. These resources make the MCU suitable for connected peripherals, industrial controllers, interface modules, and compact embedded products.
The ARM7TDMI architecture uses a 32-bit instruction set with Thumb instruction support for code-density-oriented embedded applications. Flash memory supports in-system program updates when the application permits, while the integrated SRAM provides working memory for stacks, buffers, protocol handlers, and control algorithms. Peripheral integration reduces the number of external components needed for a basic control design and helps simplify PCB layout in space-constrained products.
Typical applications include industrial monitoring equipment, communications interfaces, embedded control modules, consumer peripherals, and compact automated products. Designers should confirm the exact peripheral set, pin multiplexing, electrical limits, and package dimensions against the manufacturer datasheet before finalizing a PCB layout. The 144-BGA package also requires careful escape-routing planning and adequate manufacturing capability.
For new designs, the AT91SAM7L64-CU should be selected when a compact ARM7 MCU with integrated Flash and SRAM is required. For an existing design, verify software compatibility, memory requirements, peripheral assignments, and timing behavior before substituting another controller. This product page combines the available technical specifications, sourcing information, application guidance, and design considerations into a concise engineering reference.
Drop-in alternatives for AT91SAM7L64-CU — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
AT91SAM7L128-CU
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
AT91SAM7L256-CU
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
AT91SAM7X128-CU
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
AT91SAM7X256-CU
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
AT91SAM7X512-CU
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
AT91SAM7L64-CU Maximum Ratings & Electrical Characteristics
| Product Type | ARM7 SAM7L Microcontroller |
| Architecture | ARM7TDMI with Thumb support |
| Instruction Set | 16/32-bit |
| Maximum Clock Frequency | 36 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| SRAM | 6 KB |
| Supply Voltage | 2.5 V to 3.3 V |
| Package | 144-BGA (13 x 13 mm) |
| Mounting Type | Surface Mount |
| Temperature Grade | Industrial temperature grade |
| Series | SAM7L |
| Core | ARM7TDMI |
| Manufacturer | Microchip Technology |
| Green Compliance | Green |
| Datasheet Package Description | 144-LFBGA |
AT91SAM7L64-CU 144-lfbga Pin Configuration Guide
Pin configuration for AT91SAM7L64-CU (144-lfbga package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for AT91SAM7L64-CU.
Refer to the datasheet for full pin configuration.
Typical Applications
AT91SAM7L64-CU is suitable for 6 applications: Industrial Monitoring and Control, Communications Interface Module, Compact Embedded Control Product, Consumer Peripheral and Interface Device, Data Acquisition Front End, Legacy Control-System Refresh.
Industrial Monitoring and Control
The AT91SAM7L64-CU suits compact monitoring equipment that samples sensors, evaluates operating conditions, and controls local outputs. Its 36 MHz ARM7TDMI core provides more processing headroom than a simple state-machine controller, while 64 KB of Flash accommodates application firmware and 6 KB of SRAM supports protocol buffers and control variables. The industrial-temperature identification supports use in enclosed equipment where moderate thermal conditions are expected. Use the integrated timers and GPIO for acquisition timing and actuator control, while confirming peripheral multiplexing and electrical limits in the manufacturer datasheet before final PCB assignment.
Recommended
Communications Interface Module
The AT91SAM7L64-CU can serve as the controller in a compact communications interface where protocol processing, status reporting, and local configuration must coexist. The 36 MHz ARM7 core supports responsive handling of serial traffic, and the 64 KB Flash capacity is suitable for embedded protocol code plus configuration storage. Its 6 KB of SRAM can hold receive and transmit buffers, although protocol-specific sizing must be checked during design. The 144-BGA footprint also helps limit board area in gateways or embedded communication accessories, provided the PCB has adequate BGA routing and assembly capability.
Recommended
Compact Embedded Control Product
AT91SAM7L64-CU is appropriate for compact embedded products that combine local control, user interaction, and supervisory communications. The ARM7TDMI processor executes application logic at up to 36 MHz, while integrated Flash and SRAM avoid the need for external memory in moderate-complexity designs. GPIO, timers, and serial functions support key scanning, actuator timing, status indication, and external communications. Because the MCU uses a 13 x 13 mm 144-BGA package, designers should balance its small footprint against the complexity of escape routing and should follow the datasheet land pattern exactly.
Recommended
Consumer Peripheral and Interface Device
The AT91SAM7L64-CU can implement a small consumer peripheral that needs local logic, persistent firmware, and communication with a host system. Its 36 MHz ARM7TDMI core is suitable for responsive command handling, and 64 KB of Flash provides room for a complete embedded application without an external memory device. The microcontroller is useful where product size, low component count, and established ARM7 software support matter more than adoption of a newer high-performance core. Validate EMC, ESD, accessibility, and production-test requirements for the final enclosure and external interfaces.
Recommended
Data Acquisition Front End
AT91SAM7L64-CU is well matched to acquisition front ends that must coordinate sensors, timing, and host data transfer. Its 36 MHz core can execute sampling orchestration and buffering logic, while 6 KB of SRAM accommodates short working buffers before data is transferred or stored. The available GPIO and timer resources support trigger inputs, status LEDs, and peripheral control. Exact ADC capabilities, timer channels, and interrupt priorities must be checked in the complete manufacturer datasheet because the target device's published listing emphasizes its processor, memory, voltage, speed, and package rather than individual peripheral ratings.
Recommended
Legacy Control-System Refresh
The AT91SAM7L64-CU can serve as a continuity choice when maintaining an ARM7 SAM7L-based control platform. Retaining the device limits changes to software, board interfaces, and qualification when the existing 36 MHz processing rate, 64 KB Flash, and 6 KB SRAM remain adequate. This is particularly useful for industrial equipment, interface modules, and specialized peripherals that have mature firmware. A replacement program should begin with a complete peripheral and pin-level review rather than relying only on processor speed or package dimensions, because architecture, interrupt behavior, peripherals, and memory organization affect software compatibility.
Recommended
Recommended Products Summary
Engineering reference data for AT91SAM7L64-CU — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Package | 144-BGA (13 x 13 mm) |
| Brand | Microchip Technology |
| Core | ARM7TDMI |
| Maximum Clock Frequency | 36 MHz |
| Flash Memory | 64 KB |
| SRAM | 6 KB |
| Supply Voltage | 2.5 V to 3.3 V |
| Temperature Grade | Industrial |
| Instruction Set | 16/32-bit with Thumb support |
| Mounting Type | Surface Mount |
Design Notes
Plan the 144-BGA escape routing before committing the board outline. Maintain the datasheet land pattern, solder-mask and copper-pad definitions, and package-specific assembly allowances. Route high-speed or sensitive signals as required by the complete peripheral list, and provide adequate via access beneath the device for inspection and rework. A compact 13 x 13 mm footprint does not eliminate the manufacturing complexity of a 144-ball package.
Design the 2.5 V or 3.3 V supply network around the exact operating configuration confirmed in the manufacturer datasheet. Place required bulk and decoupling capacitance close to the associated power and ground balls, and provide clean return paths beneath active circuitry. Review all peripheral I/O voltage limits before connecting external signals, particularly where 5 V tolerance or mixed-voltage interfaces are relevant.
Do not select a replacement based only on clock speed, Flash capacity, or package dimensions. The ARM7TDMI core, peripheral mapping, interrupt architecture, memory organization, boot behavior, and development-tool support must also match the firmware and PCB. For legacy designs, perform GPIO, UART, timer, debug, reset, and power-ball comparisons against the official pin table before releasing a substitute to production.
Route clocks, reset, debug signals, and communication interfaces away from noisy switching nodes and maintain continuous ground references beneath their paths. Use the manufacturer’s recommended external component values for oscillators, reset circuitry, and interface support components. If the MCU operates near high-current switching converters, verify return-current paths and supply-noise sensitivity in system-level testing rather than relying only on schematic connectivity.
Compliance Information
The product listing identifies the component as green and industrial-temperature grade but does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance. Current manufacturer declarations should be obtained before regulated production release.