ATF22LV10C-10PC - 10ns 22V10 CMOS PLD | Microchip
MPN: ATF22LV10C-10PC ✓ فعالATF22LV10C-10PC نمای کلی
A simple programmable logic device is a programmable semiconductor used to implement compact combinational or registered logic functions. The ATF22LV10C belongs to the broader SPLD family, combining programmable logic architecture with a nonvolatile configuration memory. Its 22V10 organization provides 10 macrocells, while the 500-gate implementation supports control, decode, interface, and compact sequencing functions without requiring a larger FPGA or microcontroller.
The -10 speed grade provides a maximum propagation delay of 10 ns and supports 3.3 V operation in the listed distributor description. Its 3.0 V to 5.5 V operating range permits use across industrial and commercial supply conditions. Electrically erasable flash memory allows the programmed configuration to be rewritten during development, production, or field updates. A configurable power-down pin can reduce standby consumption to 10 uA typical when the system is not actively using the logic.
The ATF22LV10C combines a PAL-type 22V10 logic structure with on-chip nonvolatile memory. Each macrocell can be configured for combinational or registered operation, allowing several common finite-state-machine, address-decoding, and control functions to be consolidated into one device. The 10 ns propagation delay class is appropriate for interfaces and control logic that must respond within a defined clock interval without the complexity of a larger programmable-logic array.
Typical uses include industrial interface logic, telecommunications control, battery-powered instrumentation, embedded control glue, legacy peripheral emulation, and compact system-sequencing logic. The device is particularly useful when several Boolean conditions, latches, counters, or state transitions can be placed in one package and updated without a fabrication-time mask change.
Designers should preserve the ATF22LV10C pin assignment when creating a PCB because programmed PLD pin relationships may not match the logical function placed on those pins. Confirm the power-down configuration, supply voltage, timing budget, and unused I/O treatment in the manufacturer datasheet before releasing the layout.
This product page combines the ATF22LV10C-10PC operating characteristics, package constraints, compatible family options, and practical implementation guidance to support schematic capture, PCB layout, sourcing, and second-source qualification.
جایگزینهای drop-in برای ATF22LV10C-10PC — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
ATF22LV10C-10PI
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ATF22LV10C-15PC
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ATF22LV10C-20PC
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
GAL22V10D-10LPNI
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PALCE22V10H-10PC/5
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATF22LV10C-10PC حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | 22V10 electrically erasable programmable logic device |
| Architecture | 10-macrocell SPLD with 500 gates |
| Maximum Propagation Delay | 10 ns |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Nominal Operating Voltage | 3.3 V |
| Macrocells | 10 |
| Logic Gates | 500 |
| Configuration Memory | Electrically erasable flash memory |
| Power-Down Control | User-controlled power-down pin |
| Standby Power | 10 uA typical |
| بستهبندی | 24-pin PDIP |
| نوع نصب | Through-hole |
| Product Family | ATF22LV10C |
| Speed Grade | -10 |
راهنمای پیکربندی پین ATF22LV10C-10PC 24-pin pdip
پیکربندی پین برای ATF22LV10C-10PC (پکیج 24-pin pdip). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای ATF22LV10C-10PC.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ATF22LV10C-10PC مناسب است برای 6 کاربردs: Industrial Control Interface Logic, Telecommunications Control Logic, Battery-Powered Instrumentation, Legacy Peripheral Emulation, Address Decoding and System Sequencing, Compact Data Acquisition Control.
Industrial Control Interface Logic
The ATF22LV10C-10PC is useful for consolidating Boolean decoding, latch functions, and control sequences in industrial interface circuitry. Its 10 macrocells provide enough capacity for multiple related conditions, while the 10 ns maximum propagation delay supports deterministic control paths. The 3.0 V to 5.5 V supply range accommodates common industrial interface levels, and the 24-pin PDIP package simplifies through-hole prototyping. Because programmed PLD pin assignments determine PCB connectivity, engineers should freeze the logic design and verify every package pin against the manufacturer pin-description table before layout release.
پیشنهادی
Telecommunications Control Logic
The ATF22LV10C-10PC can implement compact protocol framing, command decoding, status sequencing, and line-interface control functions. Electrically erasable flash memory permits configuration changes during hardware development without a new fabrication mask, and 10 macrocells can consolidate several small Boolean subcircuits. Its 10 ns speed class helps preserve timing margin in synchronous control paths, while operation from 3.0 V to 5.5 V supports mixed legacy and modern logic levels. Designers should evaluate setup and hold requirements, unused input states, and power-down behavior against the specific communication protocol.
پیشنهادی
Battery-Powered Instrumentation
The ATF22LV10C-10PC fits low-duty-cycle instrumentation where the main system spends significant time between active measurement events. The configurable power-down function provides 10 uA typical standby power according to the Microchip manufacturer datasheet, allowing the control logic to enter a lower-consumption state between operations. During active intervals, the 10 ns propagation-delay class can implement sequencers, sampling controls, and alarm conditions. The 24-pin PDIP package is practical for through-hole prototypes and repairable assemblies, while the 3.0 V to 5.5 V operating range supports regulated battery-derived supplies.
پیشنهادی
Legacy Peripheral Emulation
The ATF22LV10C-10PC is applicable when a modern controller must reproduce a small legacy PLA, PAL, or address-decoder interface. Ten configurable macrocells and 500 gates provide capacity for combinational equations, registered outputs, and short state machines without replacing the control subsystem with a larger FPGA. Electrically erasable flash memory supports iteration when discovering undocumented interface behavior, and the 10 ns class provides additional timing margin over slower family options. Pinout reuse must be validated carefully because logical functions can be assigned differently among compatible SPLD devices.
پیشنهادی
Address Decoding and System Sequencing
The ATF22LV10C-10PC can combine address decode, chip-select generation, reset sequencing, and mode-control signals in a single programmable device. This consolidation reduces the need for separate AND gates, flip-flops, and counter logic while retaining a 10 ns maximum propagation delay. The 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V system logic, and the 24-pin PDIP package is convenient for through-hole industrial controls. Engineers should establish propagation budgets for every decoded path and review whether the selected speed grade maintains adequate setup margin at the system clock.
پیشنهادی
Compact Data Acquisition Control
The ATF22LV10C-10PC can coordinate sample sequencing, range selection, trigger gating, and status outputs in compact data-acquisition systems. Ten macrocells allow related control equations to be consolidated, while the 10 ns propagation delay supports short synchronous delays between acquisition events. The device operates from 3.0 V to 5.5 V and can be placed beside legacy analog interface circuitry without requiring a modern FPGA. For dependable measurement results, the control outputs must remain stable for the full acquisition period, and unused inputs should be assigned definite states in the final programmed configuration.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ATF22LV10C-10PC — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ATF22LV10C-10PI | ATF22LV10C-15PC | ATF22LV10C-20PC | GAL22V10D-10LPNI | PALCE22V10H-10PC/5 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-pin PDIP | 24-pin PDIP - same | 24-pin PDIP - same | 24-pin PDIP - same | 24-pin PDIP - same | 24-pin PDIP - same |
| Device Type | 22V10 electrically erasable SPLD | 22V10 electrically erasable SPLD | 22V10 electrically erasable SPLD | 22V10 electrically erasable SPLD | 22V10-style programmable logic device | 22V10-style programmable logic device |
| Speed Designation | 10 ns | 10 ns | 15 ns | 20 ns | 10 ns | 10 ns |
تفاوتهای کلیدی
- Faster propagation-delay grade within the same ATF22LV10C family (در مقابلATF22LV10C-20PC)
- Commercial-temperature configuration with the same 10 ns speed class (در مقابلATF22LV10C-10PI)
- Slower alternatives retain the 10-macrocell, 500-gate architecture (در مقابلATF22LV10C-15PC)
یادداشتهای طراحی
Do not assume that a 22V10-family socket substitution is automatically functional. Programmed PLD devices can assign different Boolean terms to the same physical pins. Compare the final fuse or flash configuration, input and output polarity, register clock arrangement, power-down behavior, and unused-pin states before approving a replacement.
Use the manufacturer power-down procedure when low standby consumption is required. The ATF22LV10C power-down pin is identified as pin 4 for DIP and SOIC packages, and the manufacturer datasheet states a 10 uA typical standby condition. Confirm the voltage and logic state applied to that pin during normal operation, reset, programming, and power removal.
Keep the 24-pin PDIP footprint tied to the exact package drawing and pin numbering used by the programmed design. Maintain short paths for clock and control signals, provide a low-impedance supply and ground connection, and decouple the supply near the device. Avoid relying solely on a family-level schematic symbol because package-specific power, ground, and configuration pins must match the physical layout.
Build the timing budget using the maximum propagation delay of the selected ATF22LV10C speed grade, including setup, hold, skew, and external clock uncertainty. The 10 ns device provides more timing margin than the 15 ns and 20 ns family variants, but that margin does not correct an unstable clock, overloaded output, or incorrect registered-output configuration.
اطلاعات انطباق
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code. AEC-Q100 qualification is not stated; the available suffix information identifies commercial and industrial temperature grades.