ATF22LV10C-10PC - 10ns 22V10 CMOS PLD | Microchip
MPN: ATF22LV10C-10PC ✓ 啟用中ATF22LV10C-10PC 概覽
A simple programmable logic device is a programmable semiconductor used to implement compact combinational or registered logic functions. The ATF22LV10C belongs to the broader SPLD family, combining programmable logic architecture with a nonvolatile configuration memory. Its 22V10 organization provides 10 macrocells, while the 500-gate implementation supports control, decode, interface, and compact sequencing functions without requiring a larger FPGA or microcontroller.
The -10 speed grade provides a maximum propagation delay of 10 ns and supports 3.3 V operation in the listed distributor description. Its 3.0 V to 5.5 V operating range permits use across industrial and commercial supply conditions. Electrically erasable flash memory allows the programmed configuration to be rewritten during development, production, or field updates. A configurable power-down pin can reduce standby consumption to 10 uA typical when the system is not actively using the logic.
The ATF22LV10C combines a PAL-type 22V10 logic structure with on-chip nonvolatile memory. Each macrocell can be configured for combinational or registered operation, allowing several common finite-state-machine, address-decoding, and control functions to be consolidated into one device. The 10 ns propagation delay class is appropriate for interfaces and control logic that must respond within a defined clock interval without the complexity of a larger programmable-logic array.
Typical uses include industrial interface logic, telecommunications control, battery-powered instrumentation, embedded control glue, legacy peripheral emulation, and compact system-sequencing logic. The device is particularly useful when several Boolean conditions, latches, counters, or state transitions can be placed in one package and updated without a fabrication-time mask change.
Designers should preserve the ATF22LV10C pin assignment when creating a PCB because programmed PLD pin relationships may not match the logical function placed on those pins. Confirm the power-down configuration, supply voltage, timing budget, and unused I/O treatment in the manufacturer datasheet before releasing the layout.
This product page combines the ATF22LV10C-10PC operating characteristics, package constraints, compatible family options, and practical implementation guidance to support schematic capture, PCB layout, sourcing, and second-source qualification.
直接替換替代品,適用於 ATF22LV10C-10PC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
ATF22LV10C-10PI
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ATF22LV10C-15PC
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ATF22LV10C-20PC
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
GAL22V10D-10LPNI
✅ 直接替換📋 參考替代品(不在目錄中)
PALCE22V10H-10PC/5
✅ 直接替換📋 參考替代品(不在目錄中)
ATF22LV10C-10PC 最大額定值與電氣特性
| Device Type | 22V10 electrically erasable programmable logic device |
| Architecture | 10-macrocell SPLD with 500 gates |
| Maximum Propagation Delay | 10 ns |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Nominal Operating Voltage | 3.3 V |
| Macrocells | 10 |
| Logic Gates | 500 |
| Configuration Memory | Electrically erasable flash memory |
| Power-Down Control | User-controlled power-down pin |
| Standby Power | 10 uA typical |
| 封裝 | 24-pin PDIP |
| 安裝類型 | Through-hole |
| Product Family | ATF22LV10C |
| Speed Grade | -10 |
ATF22LV10C-10PC 24-pin pdip 腳位配置指南
ATF22LV10C-10PC(24-pin pdip 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATF22LV10C-10PC.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATF22LV10C-10PC 適用於 6 應用s: Industrial Control Interface Logic, Telecommunications Control Logic, Battery-Powered Instrumentation, Legacy Peripheral Emulation, Address Decoding and System Sequencing, Compact Data Acquisition Control.
Industrial Control Interface Logic
The ATF22LV10C-10PC is useful for consolidating Boolean decoding, latch functions, and control sequences in industrial interface circuitry. Its 10 macrocells provide enough capacity for multiple related conditions, while the 10 ns maximum propagation delay supports deterministic control paths. The 3.0 V to 5.5 V supply range accommodates common industrial interface levels, and the 24-pin PDIP package simplifies through-hole prototyping. Because programmed PLD pin assignments determine PCB connectivity, engineers should freeze the logic design and verify every package pin against the manufacturer pin-description table before layout release.
推薦
Telecommunications Control Logic
The ATF22LV10C-10PC can implement compact protocol framing, command decoding, status sequencing, and line-interface control functions. Electrically erasable flash memory permits configuration changes during hardware development without a new fabrication mask, and 10 macrocells can consolidate several small Boolean subcircuits. Its 10 ns speed class helps preserve timing margin in synchronous control paths, while operation from 3.0 V to 5.5 V supports mixed legacy and modern logic levels. Designers should evaluate setup and hold requirements, unused input states, and power-down behavior against the specific communication protocol.
推薦
Battery-Powered Instrumentation
The ATF22LV10C-10PC fits low-duty-cycle instrumentation where the main system spends significant time between active measurement events. The configurable power-down function provides 10 uA typical standby power according to the Microchip manufacturer datasheet, allowing the control logic to enter a lower-consumption state between operations. During active intervals, the 10 ns propagation-delay class can implement sequencers, sampling controls, and alarm conditions. The 24-pin PDIP package is practical for through-hole prototypes and repairable assemblies, while the 3.0 V to 5.5 V operating range supports regulated battery-derived supplies.
推薦
Legacy Peripheral Emulation
The ATF22LV10C-10PC is applicable when a modern controller must reproduce a small legacy PLA, PAL, or address-decoder interface. Ten configurable macrocells and 500 gates provide capacity for combinational equations, registered outputs, and short state machines without replacing the control subsystem with a larger FPGA. Electrically erasable flash memory supports iteration when discovering undocumented interface behavior, and the 10 ns class provides additional timing margin over slower family options. Pinout reuse must be validated carefully because logical functions can be assigned differently among compatible SPLD devices.
推薦
Address Decoding and System Sequencing
The ATF22LV10C-10PC can combine address decode, chip-select generation, reset sequencing, and mode-control signals in a single programmable device. This consolidation reduces the need for separate AND gates, flip-flops, and counter logic while retaining a 10 ns maximum propagation delay. The 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V system logic, and the 24-pin PDIP package is convenient for through-hole industrial controls. Engineers should establish propagation budgets for every decoded path and review whether the selected speed grade maintains adequate setup margin at the system clock.
推薦
Compact Data Acquisition Control
The ATF22LV10C-10PC can coordinate sample sequencing, range selection, trigger gating, and status outputs in compact data-acquisition systems. Ten macrocells allow related control equations to be consolidated, while the 10 ns propagation delay supports short synchronous delays between acquisition events. The device operates from 3.0 V to 5.5 V and can be placed beside legacy analog interface circuitry without requiring a modern FPGA. For dependable measurement results, the control outputs must remain stable for the full acquisition period, and unused inputs should be assigned definite states in the final programmed configuration.
推薦
推薦產品摘要
工程參考資料,適用於 ATF22LV10C-10PC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATF22LV10C-10PI | ATF22LV10C-15PC | ATF22LV10C-20PC | GAL22V10D-10LPNI | PALCE22V10H-10PC/5 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-pin PDIP | 24-pin PDIP - same | 24-pin PDIP - same | 24-pin PDIP - same | 24-pin PDIP - same | 24-pin PDIP - same |
| Device Type | 22V10 electrically erasable SPLD | 22V10 electrically erasable SPLD | 22V10 electrically erasable SPLD | 22V10 electrically erasable SPLD | 22V10-style programmable logic device | 22V10-style programmable logic device |
| Speed Designation | 10 ns | 10 ns | 15 ns | 20 ns | 10 ns | 10 ns |
主要差異化特點
- Faster propagation-delay grade within the same ATF22LV10C family (對比ATF22LV10C-20PC)
- Commercial-temperature configuration with the same 10 ns speed class (對比ATF22LV10C-10PI)
- Slower alternatives retain the 10-macrocell, 500-gate architecture (對比ATF22LV10C-15PC)
設計說明
Do not assume that a 22V10-family socket substitution is automatically functional. Programmed PLD devices can assign different Boolean terms to the same physical pins. Compare the final fuse or flash configuration, input and output polarity, register clock arrangement, power-down behavior, and unused-pin states before approving a replacement.
Use the manufacturer power-down procedure when low standby consumption is required. The ATF22LV10C power-down pin is identified as pin 4 for DIP and SOIC packages, and the manufacturer datasheet states a 10 uA typical standby condition. Confirm the voltage and logic state applied to that pin during normal operation, reset, programming, and power removal.
Keep the 24-pin PDIP footprint tied to the exact package drawing and pin numbering used by the programmed design. Maintain short paths for clock and control signals, provide a low-impedance supply and ground connection, and decouple the supply near the device. Avoid relying solely on a family-level schematic symbol because package-specific power, ground, and configuration pins must match the physical layout.
Build the timing budget using the maximum propagation delay of the selected ATF22LV10C speed grade, including setup, hold, skew, and external clock uncertainty. The 10 ns device provides more timing margin than the 15 ns and 20 ns family variants, but that margin does not correct an unstable clock, overloaded output, or incorrect registered-output configuration.
合規資訊
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code. AEC-Q100 qualification is not stated; the available suffix information identifies commercial and industrial temperature grades.