ATSAM4N8BA-MUR - 100MHz Cortex-M4 MCU 512KB Flash | Microchip
MPN: ATSAM4N8BA-MUR ✓ فعالATSAM4N8BA-MUR نمای کلی
A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest level of the embedded processing hierarchy: microcontroller unit (MCU) -> embedded processor -> microprocessor -> computing system. The SAM4N family belongs to Microchip's (formerly Atmel) SAM4 line of ARM Cortex-M4-based flash MCUs, targeting cost-sensitive embedded control applications that need 32-bit performance without floating-point heavy workloads.
Key features of the ATSAM4N8B device include six USARTs, three SPI interfaces, and three I2C/TWI interfaces for fast serial communication, plus a 10-channel 12-bit ADC, a 10-bit DAC, PWM channels, timers, and a real-time clock (RTC). The supply range of 1.62V to 3.6V allows direct battery operation from single-cell lithium chemistry or 3.3V industrial rails.
Architecturally, the ARM Cortex-M4 core at 100 MHz delivers approximately 125 DMIPS with single-cycle multiply and hardware division, while the 512KB single-cycle flash and 64KB SRAM support large protocol stacks and data buffers typical of industrial gateways and sensing nodes.
Typical applications include industrial automation nodes, motor control and PWM-driven power stages, sensor hubs using the 12-bit ADC, and building/HVAC controllers that rely on the RTC and multiple serial ports.
Design consideration: the QFN exposed pad is the main ground/thermal path and must be soldered to a solid ground pour; also budget supply decoupling across all VDD/VDDIO pairs given the multi-rail 1.62V to 3.6V architecture.
This page synthesizes distributor pricing (as of 2026-09-20), drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
جایگزین‌های drop-in برای ATSAM4N8BA-MUR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATSAM4N8BA-MUR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, RoHS Status, Flash Memory, Series, Maximum Clock Frequency.
ATSAM4N8BA-MU
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATSAM4N16BA-MU
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATSAM4N8AA-MUR
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
ATSAM4LC8BA-UUR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATSAM4LS8BA-AUR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATSAM4N8BA-MUR حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core | ARM Cortex-M4 |
| Core Size | 32-Bit |
| حداکثر فرکانس کلاک | 100 MHz |
| Flash Memory | 512KB (512K x 8) |
| SRAM | 64KB |
| Supply Voltage Range | 1.62 V to 3.6 V |
| USART Peripherals | 6 |
| SPI Peripherals | 3 |
| I2C Peripherals | 3 |
| ADC Resolution / Channels | 12-bit, 10 channels |
| DAC Resolution | 10-bit |
| Other Peripherals | PWM, timers, RTC |
| بسته‌بندی | 64-QFN (9x9 mm) with exposed pad |
| نوع نصب | Surface Mount |
| Temperature Grade | Industrial |
| وضعیت RoHS | Compliant (GREEN, per Mouser listing) |
| Packaging Code | MUR = Tape & Reel, MRL A |
راهنمای پیکربندی پین ATSAM4N8BA-MUR 64-qfn (9x9 mm) with exposed pad
پیکربندی پین برای ATSAM4N8BA-MUR (پکیج 64-qfn (9x9 mm) with exposed pad). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای ATSAM4N8BA-MUR.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
ATSAM4N8BA-MUR مناسب است برای 6 کاربردs: Industrial Automation Nodes, Motor Control and PWM Power Stages, Sensor Hubs and Data Acquisition, Building Automation and HVAC Controllers, Portable and Battery-Powered Instruments, IoT Edge Nodes and Networked Sensors.
Industrial Automation Nodes
The ATSAM4N8BA-MUR fits industrial automation nodes because its six USARTs and three SPI/I2C buses can service RS-485 fieldbus drops, isolated sensors, and local flash logging concurrently, while the 100 MHz Cortex-M4 core handles protocol stacks with margin. The industrial temperature grade and 1.62V to 3.6V supply tolerate noisy 3.3V industrial rails. Placed as the main controller, the MCU's PWM and timer resources drive actuators, and the 10-channel 12-bit ADC digitizes up to ten analog process signals without an external front-end, cutting BOM cost versus a smaller 8-bit MCU plus ADC solution.
پیشنهادی
Motor Control and PWM Power Stages
The ATSAM4N8BA-MUR suits PWM-driven motor and power stages because its hardware PWM channels and timers generate complementary drive signals without CPU intervention, and the 10-channel 12-bit ADC samples current and voltage feedback for closed-loop control at 100 MHz core speed. The 1.62V to 3.6V supply interfaces directly with gate-driver logic inputs at 3.3V. Firmware latency is predictable thanks to the Cortex-M4 deterministic interrupt architecture. Trade-off: the part lacks a floating-point unit benefit path for heavy FOC math, so fixed-point control or an external co-processor may be preferred for high-precision servo loops.
پیشنهادی
Sensor Hubs and Data Acquisition
The ATSAM4N8BA-MUR is a strong sensor-hub controller: its 10-channel 12-bit ADC digitizes analog sensors directly, the three I2C and three SPI ports aggregate digital sensors on separate buses to isolate fault domains, and 64KB SRAM buffers burst data before offloading over USART links. The 100 MHz Cortex-M4 executes filtering and averaging in real time. Powering the hub from a single 3.3V rail within the 1.62V to 3.6V range simplifies design, and the exposed-pad QFN grounds the analog reference plane for better ADC noise performance than plastic thin packages.
پیشنهادی
Building Automation and HVAC Controllers
HVAC and building controllers benefit from the ATSAM4N8BA-MUR's real-time clock for scheduled operation, six USARTs for multi-zone communication (BACnet/Modbus style multi-drop over RS-485), and the 12-bit ADC for temperature, humidity, and pressure sensor integration. The 512KB flash holds protocol stacks plus web-style configuration interfaces, and the industrial temperature grade suits rooftop and mechanical-room environments. The 100 MHz core keeps control loops and communication simultaneous without task starvation, and the wide 1.62V to 3.6V supply rides brownouts from shared 3.3V rails with simple decoupling.
پیشنهادی
Portable and Battery-Powered Instruments
Handheld instruments use the ATSAM4N8BA-MUR because its 1.62V to 3.6V supply runs directly from two-cell alkaline or single-cell lithium sources, and its sleep modes preserve battery life between measurements. The 10-bit DAC generates test/reference stimuli, the 12-bit ADC captures responses, and the Cortex-M4 core performs DSP-style filtering on the 100 MHz pipeline. The 64-QFN 9x9 mm footprint keeps the PCB compact for enclosure-constrained products. Designers should budget the exposed pad as the thermal return path and use the MCU's low-power modes plus RTC wake for months-long field operation between battery changes.
پیشنهادی
IoT Edge Nodes and Networked Sensors
For IoT edge nodes, the ATSAM4N8BA-MUR provides the local intelligence: 512KB flash stores MQTT/CoAP stacks and OTA-capable bootloaders, the multiple USART/SPI/I2C ports link radios (Wi-Fi, LoRa, BLE modules) and sensors simultaneously, and the RTC timestamps events. The 100 MHz Cortex-M4 handles TLS-adjacent pre-processing and payload framing deterministically. Its 1.62V to 3.6V input pairs naturally with 3.3V radio modules on a shared rail. Firmware headroom is the key consideration: with 64KB SRAM, keep TLS buffers lean or select the 1MB ATSAM4N16BA-MU drop-in sibling if protocol growth is expected over the product lifetime.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای ATSAM4N8BA-MUR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | ATSAM4N8BA-MU | ATSAM4N16BA-MU | ATSAM4N8AA-MUR | ATSAM4LC8BA-UUR | ATSAM4LS8BA-AUR |
|---|---|---|---|---|---|---|
| Package | 64-QFN (9x9 mm), EP | 64-QFN (9x9 mm) - same | 64-pin package - same family footprint | 64-QFN (9x9 mm) - same | 64-QFN | 64-QFN |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Clock | ARM Cortex-M4, 100 MHz | ARM Cortex-M4, 100 MHz | ARM Cortex-M4, 100 MHz | ARM Cortex-M4, 100 MHz | ARM Cortex-M4, lower-power implementation | ARM Cortex-M4, lower-power implementation |
| Flash Memory | 512KB | 512KB | 1MB | 256KB | 512KB class | 512KB class |
| SRAM | 64KB | 64KB | 128KB | 64KB | 64KB class | 64KB class |
| Serial Peripherals | 6 USART, 3 SPI, 3 I2C | 6 USART, 3 SPI, 3 I2C | similar SAM4N peripheral set | similar SAM4N peripheral set | SAM4L peripheral set (different mux) | SAM4L peripheral set (different mux) |
| Packaging | Tape & Reel (MUR) | Tray (MU) | Tray (MU) | Tape & Reel (MUR) | Tape & Reel (UUR) | Tape & Reel (AUR) |
تفاوت‌های کلیدی
- Best memory/price balance in the 64-QFN SAM4N lineup (در مقابلATSAM4N16BA-MU)
- Twelve serial peripherals for multi-bus designs (در مقابلATSAM4LC8BA-UUR)
- Full 512KB at 100 MHz without a family downgrade (در مقابلATSAM4N8AA-MUR)
یادداشت‌های طراحی
The 64-QFN 9x9 mm exposed pad is the primary ground and thermal connection. Design a 3x3 or larger array of thermal vias under the pad to a solid internal ground plane, and ensure the stencil applies 50-70% paste coverage to avoid voiding during reflow. All VDD and VDDIO pairs need a 100 nF ceramic capacitor within 2 mm of each pin pair, plus one bulk 4.7-10 uF capacitor per rail. Follow Microchip's SAM4N datasheet layout section for the NRST pull-up and SWD debug header placement.
Supply range is 1.62V to 3.6V. In mixed systems with a 5V rail, use a 3.3V LDO and confirm no external peripheral drives MCU I/O above 3.6V; series resistors or level shifters protect the inputs. For battery designs, monitor the brown-out reset threshold against the battery discharge curve so the MCU does not write to flash near the minimum supply. Estimated: a node sleeping most of the time with periodic 100 MHz bursts benefits greatly from configuring sleep modes and gating unused peripheral clocks, since active-mode current scales with clock frequency.
When migrating between SAM4N memory-density variants (ATSAM4N8AA / 8BA / 16BA), the linker script flash and RAM sizes must be updated and the pin multiplexing re-verified against the correct datasheet table - pin functions differ subtly across package options. When considering a cross-family swap to SAM4L parts (ATSAM4LC8BA-UUR, ATSAM4LS8BA-AUR), note that the peripheral architecture, clock tree, and pinout differ from SAM4N despite the similar 64-QFN footprint; budget PCB and firmware rework. Always program the flash via a verified SWD image before mass production.
اطلاعات انطباق
Mouser lists the part as QFN, GREEN, IND TEMP, MRL A - GREEN denotes Microchip's RoHS-compliant, halogen-free designation. REACH and conflict-minerals status should be confirmed via Microchip's official material declarations.
