Microchip Technology

ATSAMD21G17D-AF - 48MHz Cortex-M0+ MCU | Microchip

MPN: ATSAMD21G17D-AF ✓ فعال
1.6 V to 3.6 V Vdss 48-pin TQFP, 7 mm × 7 mm Package 48 MHz Speed 128 KB Memory
حداقل سفارش: 1 |

ATSAMD21G17D-AF نمای کلی

The Microchip Technology ATSAMD21G17D-AF is a 32-bit Arm Cortex-M0+ automotive microcontroller with a 48 MHz maximum operating frequency, 128 KB of embedded flash memory, and 16 KB of SRAM, supplied in a 48-pin TQFP package measuring 7 mm by 7 mm. The device supports a 1.6 V to 3.6 V operating range and is identified as an AEC-Q100 automotive-grade, functional-safety microcontroller.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, analog conversion functions, timers, and general-purpose input/output into one device. The Cortex-M0+ architecture provides compact, energy-efficient 32-bit processing, while the ATSAMD21G17D-AF places it in the hierarchy of embedded microcontroller, embedded processor, and programmable control IC. This combination suits systems that need deterministic control and mixed signal connectivity without a complex processor or external discrete components.

The ATSAMD21G17D-AF provides 128 KB of flash, 16 KB of SRAM, and 4 KB of read-while-write memory. According to the Microchip SAM D21/DA1 family datasheet DS40001882H, the family operates up to 48 MHz and reaches 2.46 CoreMark/MHz. The device also supports USB connectivity and integrates 12 DMA channels, nine timers, and six serial communication interfaces covering USART, SPI, I2C, I2S, and LIN functions.

Its peripheral set includes advanced analog and PWM resources, allowing the MCU to supervise external sensors, control actuators, sample analog signals, and generate precise timing signals without excessive external circuitry. The SAM D21 family supports pin-compatible migration paths between devices in the series, helping preserve PCB layouts when memory, temperature grade, qualification, or production configuration requirements change. Its linear address map and compatible peripheral architecture also simplify firmware migration within the family.

Typical uses include automotive control modules, home automation equipment, consumer products, metering systems, industrial controllers, and compact embedded control nodes. USB connectivity makes the device suitable for USB-connected configuration, diagnostics, or peripheral control, while the mixed analog and PWM resources benefit designs that combine sensing with real-time output control. The 48-TQFP package also provides a conventional leaded footprint suitable for manufacturing and inspection.

Design around the 1.6 V to 3.6 V operating range and verify the exact temperature grade, qualification, and factory-programming requirements for the selected ordering code. Decoupling, signal integrity, USB routing, and programming access require attention even though the device integrates many resources. Use the manufacturer pin-description table and family reference design when assigning tracks and programming tools.

This product overview consolidates the principal electrical, memory, package, peripheral, qualification, and sourcing information for ATSAMD21G17D-AF, then adds application guidance, drop-in alternatives, and engineering considerations that help engineers evaluate the MCU before schematic capture.

جایگزین‌های drop-in برای ATSAMD21G17D-AF — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATSAMD21G17D-AF (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, ADC, Operating Temperature, RoHS Status, DAC.

Microchip Technology
Package: 48-pin TQFP (7x7 mm)
ADC: 12-bit, up to 16 channels
Operating Temperature: -40 C to +85 C
مقایسه با ATSAMD21G17D-AF →
Microchip Technology
Package: 48-pin TQFP (7x7 mm)
ADC: 12-bit, up to 350 ksps
Operating Temperature: -40C to +125C (industrial)
مقایسه با ATSAMD21G17D-AF →
Microchip Technology
Package: 48-TQFP (7x7 mm)
ADC: 12-bit SAR, up to 20 channels, 350 ksps
Operating Temperature: -40C to +85C (Industrial)
مقایسه با ATSAMD21G17D-AF →

ATSAMD21G17D-AFT

✅ جایگزین مستقیم
Microchip Technology
📦 48-pin TQFP (7 mm × 7 mm)
ARM Cortex-M0+ (v6-M) · 32-bit RISC · 48 MHz · 128 KB · 16 KB · 4 KB · 1.62 V to 3.63 V · -40C to +125C (industrial)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATSAMD21G17D-AUT

✅ جایگزین مستقیم
Microchip Technology
📦 48-pin TQFP (7 mm × 7 mm)
ARM Cortex-M0+ (32-bit, single-core) · SAM D21G (Functional Safety) · 48 MHz · 128 KB (128K x 8) · 16 KB · 4 KB · 48-TQFP (7x7 mm) · Surface Mount (Tape & Reel)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATSAMD21G17D-AZT

✅ جایگزین مستقیم
📦 48-pin TQFP (7 mm × 7 mm)
Same 48 MHz Cortex-M0+ SAM D21G electrical platform and 48-pin TQFP footprint; this option adds factory-programmable production configuration.

📋 جایگزین مرجع (خارج از کاتالوگ)

ATSAMC21G17A-AUT

✅ جایگزین مستقیم
Microchip Technology
📦 48-pin TQFP (7 mm × 7 mm)
ARM Cortex-M0+ · 32-bit · 48 MHz · 128 KB (128K x 8) · 16 KB · 4 KB (independent self-programmable) · 2.7 V to 5.5 V · -40 C to +85 C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATSAMD21G17D-AF حداکثر مقادیر مجاز و مشخصات الکتریکی

CPU Architecture 32-bit Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Core Performance 2.46 CoreMark/MHz
Program Flash Memory 128 KB
SRAM 16 KB
Read-While-Write Memory 4 KB
Operating Voltage Range 1.6 V to 3.6 V
Maximum Temperature 125 °C
بسته‌بندی 48-pin TQFP, 7 mm × 7 mm
نوع نصب Surface mount
DMA Channels 12 channels
Timers 9 timers
Serial Communication Interfaces 6 interfaces
Supported Serial Interfaces USART, SPI, I2C, I2S, and LIN
USB Connectivity Supported
Automotive Qualification AEC-Q100
Functional Safety Classification Functional Safety (FuSa)
وضعیت RoHS Unknown
REACH Status Unknown

راهنمای پیکربندی پین ATSAMD21G17D-AF 48-pin tqfp, 7 mm × 7 mm

پیکربندی پین برای ATSAMD21G17D-AF (پکیج 48-pin tqfp, 7 mm × 7 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 48-pin tqfp, 7 mm × 7 mm برای ATSAMD21G17D-AF

داده پین‌آوت تفصیلی موجود نیست برای ATSAMD21G17D-AF.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATSAMD21G17D-AF مناسب است برای 6 کاربردs: Automotive Control Modules, Industrial Metering and Sensing, Home Automation Controllers, USB-Connected Embedded Products, Precision Timing and PWM Control, Consumer and Utility Electronics.

🚗

Automotive Control Modules

The ATSAMD21G17D-AF fits compact vehicle control modules that combine low-power 32-bit processing with real-time peripherals. Its 48 MHz Cortex-M0+ core, 12 DMA channels, and nine timers support actuator control and periodic signal handling, while USART, SPI, I2C, I2S, and LIN interfaces connect vehicle networks and sensors. The AEC-Q100 identification is especially relevant for automotive qualification programs. Designers should use the 1.6 V to 3.6 V operating range to define the power architecture and verify the exact 125 °C ordering-code requirements.

🏭

Industrial Metering and Sensing

The ATSAMD21G17D-AF is appropriate for metering and industrial sensing nodes that must acquire analog information and report it through embedded communications. Its advanced analog resources, 12 DMA channels, and nine timers reduce the need for separate data-acquisition circuitry, while 128 KB of flash stores application code and 16 KB of SRAM supports working buffers. USB, USART, SPI, I2C, and LIN provide flexible links to host systems and field equipment. The small 7 mm × 7 mm TQFP package also suits densely populated instrument electronics.

🧩

Home Automation Controllers

The ATSAMD21G17D-AF can serve as the local control hub in a home automation system that coordinates sensors, relays, lighting, and communications. Its low-power Cortex-M0+ architecture supports responsive embedded control, and the six serial interfaces allow SPI, I2C, USART, and other protocol peripherals to share the device. Nine timers support dimming, pulse generation, and periodic tasks, while 4 KB of read-while-write memory allows selected data regions to be updated without stopping instruction execution from that area.

🖥️

USB-Connected Embedded Products

The ATSAMD21G17D-AF is well suited to compact USB-connected products requiring configuration, diagnostics, or data exchange with a host. Its USB connectivity operates alongside 12 DMA channels for efficient data movement, while the 48 MHz Cortex-M0+ core handles protocol and application tasks. The 128 KB flash and 16 KB SRAM provide a practical balance for embedded firmware, and the 48-pin TQFP footprint simplifies assembly into industrial, consumer, and instrumentation boards.

💡

Precision Timing and PWM Control

The ATSAMD21G17D-AF fits motor, lighting, and signal-generation subsystems that require several independent timing functions. Its nine timers support PWM generation, capture, periodic interrupts, and timing references, while the 48 MHz Cortex-M0+ processor performs supervisory control. Twelve DMA channels can move timing and peripheral data with reduced processor intervention. For power conversion or LED systems, designers should review timer trigger paths and pin multiplexing in the manufacturer datasheet before assigning outputs.

🔧

Consumer and Utility Electronics

The ATSAMD21G17D-AF can support programmable control, user interfaces, and communications in consumer and utility equipment. Its 48 MHz Cortex-M0+ core offers responsive control without a high-power application processor, and the integrated analog, timer, and serial resources reduce board area. USB provides a convenient local connection to configuration tools or accessories, while the 1.6 V to 3.6 V supply range enables integration with common low-voltage power systems. Firmware designers should use the pin table to share peripheral functions without electrical conflicts.

خلاصه محصولات پیشنهادی

ATSAMD21G17D-AUT Microchip Technology استفاده‌شده در: Automotive Control Modules, Home Automation Controllers, Precision Timing and PWM Control, Consumer and Utility Electronics ATSAMC21G17A-AUT Microchip Technology استفاده‌شده در: Automotive Control Modules ATSAMD21G17 Base SAM D21 family device for the same core and peripheral architecture استفاده‌شده در: Industrial Metering and Sensing, Home Automation Controllers, Precision Timing and PWM Control ATSAMD21G17D-AZT Factory-programmable option for managed production builds استفاده‌شده در: Industrial Metering and Sensing, USB-Connected Embedded Products, Consumer and Utility Electronics ATSAMD21G17D-AFT Microchip Technology استفاده‌شده در: USB-Connected Embedded Products
What are the key specifications of ATSAMD21G17D-AF that engineers should know?
The ATSAMD21G17D-AF is a 32-bit Arm Cortex-M0+ microcontroller operating up to 48 MHz with 128 KB of flash, 16 KB of SRAM, and 4 KB of read-while-write memory. It is packaged in a 48-pin, 7 mm × 7 mm TQFP and operates from 1.6 V to 3.6 V. According to the Microchip SAM D21/DA1 family datasheet DS40001882H, the family achieves 2.46 CoreMark/MHz and supports pin-compatible migration paths within the series.
What is the ATSAMD21G17D-AF used for?
The ATSAMD21G17D-AF is designed for automotive, industrial, home automation, consumer, and metering applications that require embedded control with mixed analog and digital functions. Its 48 MHz Cortex-M0+ core, 12 DMA channels, nine timers, USB, and six serial interfaces support real-time control, data acquisition, communications, and actuator management. Microchip identifies the device as an AEC-Q100 automotive and functional-safety microcontroller for designs requiring qualified control electronics.
Where can I download the ATSAMD21G17D-AF datasheet PDF?
The ATSAMD21G17D-AF datasheet PDF is available through the Microchip SAM D21/DA1 family data sheet, document DS40001882H. Use that document for the complete register descriptions, pin definitions, electrical characteristics, clocking system, peripheral operation, and recommended application circuits. The manufacturer product page for ATSAMD21G17 is also the appropriate starting point for selecting the correct package, temperature grade, and ordering code.
Where can I find the ATSAMD21G17D-AF pinout?
The ATSAMD21G17D-AF pinout is found in the pin-description table of the Microchip SAM D21/DA1 family datasheet DS40001882H. Use the 48-pin TQFP drawing associated with the target ordering code to map PA and PB port signals, power pins, clock inputs, communication interfaces, analog inputs, and programming pins. Because adjacent pins can carry multiple peripheral functions, assign the required function through the device configuration registers after checking the complete pin table.
What is the difference between ATSAMD21G17D-AF and ATSAMD21G17D-AUT?
ATSAMD21G17D-AF and ATSAMD21G17D-AUT are both listed as 48 MHz Cortex-M0+ SAM D21G devices with 128 KB of flash and a 48-pin, 7 mm × 7 mm TQFP package. Their ordering codes represent different production variants, but the public listing excerpts do not expose every qualification or commercial attribute. According to Microchip’s ATSAMD21G17 product page, both belong to a family offering 16 KB of SRAM and 4 KB of read-while-write memory.
Can ATSAMD21G17D-AFT replace ATSAMD21G17D-AF on the same PCB?
ATSAMD21G17D-AFT can serve as a board-level alternative to ATSAMD21G17D-AF because both are identified as the same 48 MHz Cortex-M0+ SAM D21G microcontroller with 128 KB of flash in a 48-pin TQFP package. The primary distinction is the ordering and packaging format, with AFT identified as tape-and-reel. Before substitution, confirm temperature grade, qualification, pin configuration, firmware support, and the exact electrical limits in the Microchip ordering information.
What is the best drop-in replacement for ATSAMD21G17D-AF?
ATSAMD21G17D-AFT is the closest published drop-in alternative for ATSAMD21G17D-AF because both use the same 48-pin TQFP footprint and share the 48 MHz Cortex-M0+ core, 128 KB flash, and 16 KB SRAM configuration. ATSAMD21G17D-AUT is another same-package option, while ATSAMD21G17D-AZT adds factory-programmable production support. Firmware, qualification, temperature, programming method, and availability should be checked before final substitution.
When should I choose ATSAMD21G17D-AF over another SAM D21 option?
Choose ATSAMD21G17D-AF when the design specifically calls for the automotive, AEC-Q100, functional-safety ATSAMD21G17D configuration in a 48-pin TQFP package with 128 KB of flash and 16 KB of SRAM. Select ATSAMD21G17D-AZT when factory programming is required, or another family member when memory or package requirements differ. Microchip states that the SAM D21 family provides identical peripheral modules and pin-compatible migration paths for supported devices.
Is ATSAMD21G17D-AF suitable for industrial control and metering applications?
The ATSAMD21G17D-AF is suitable for compact control and metering systems that need low-power embedded processing, accurate timing, analog measurement, and multiple communication standards. The device supports 12 DMA channels, nine timers, USB, USART, SPI, I2C, I2S, and LIN, while its 128 KB flash and 16 KB SRAM are adequate for coordinated control firmware. Its AEC-Q100 designation is also relevant when the end equipment has automotive or high-reliability requirements.
How much power supply voltage does ATSAMD21G17D-AF require?
The ATSAMD21G17D-AF operates from 1.6 V to 3.6 V. According to the Microchip SAM D21/DA1 family datasheet DS40001882H, the device includes power-management features and a maximum operating frequency of 48 MHz. Supply design should account for the voltage, decoupling, startup, and peripheral current requirements listed for the exact ordering code, rather than treating the full 3.6 V limit as the only design condition.
What programming tools are compatible with ATSAMD21G17D-AF?
ATSAMD21G17D-AF is supported by programming solutions that recognize the SAM D21/ATSAMD21G17D device family, including the Elnec ATSAMD21G17D ISP programmer specification listed for the device. The manufacturer’s programming and debug documentation should identify supported debugger, flash-programming, and production-programming interfaces. Configuration protection, boot options, factory programming, and fuse settings must match the product requirements before programming is released to manufacturing.
Is ATSAMD21G17D-AF RoHS and REACH compliant?
The ATSAMD21G17D-AF is associated with an AEC-Q100 automotive qualification, but the published product excerpts do not explicitly state its RoHS, REACH, lead-free, or halogen-free status. Confirm those declarations on the current Microchip product page and the relevant material declaration for the exact ordering code. Do not infer general regulatory compliance solely from the automotive qualification, because RoHS, REACH, and AEC-Q100 address different requirements.
What is the lifecycle status of ATSAMD21G17D-AF?
ATSAMD21G17D-AF is currently presented as an orderable Microchip Technology microcontroller, with active manufacturer and distributor product listings and factory-programmable ordering information for the family. Current production status should still be confirmed for the exact suffix before a long-running program begins, particularly when automotive qualification, traceability, or a fixed procurement window is required. Request the current lifecycle and lead-time confirmation through the Request a Quote form on this page.
Where can I buy ATSAMD21G17D-AF online and what is its lead time?
ATSAMD21G17D-AF can be requested through the Request a Quote form on this page, where the exact suffix, quantity, packaging, delivery schedule, and inspection requirements can be reviewed. Current supplier listings show the part in the market, but availability and lead time can vary with production allocation and order quantity. Use the quote form for current unit availability, lot traceability, and a confirmed delivery schedule instead of relying on a temporary distributor stock count.
What is the price of ATSAMD21G17D-AF?
The current commercial price for ATSAMD21G17D-AF should be confirmed through the Request a Quote form on this page because pricing depends on quantity, shipment method, lot requirements, and current production allocation. The structured offer information on this page reflects the latest extractable pricing state, while the quote form provides the appropriate purchasing channel for a firm order. Engineers comparing commercial options should request quotes using identical quantities and delivery terms.
Is ATSAMD21G17D-AF in stock?
ATSAMD21G17D-AF has current market listings, but a definitive stock commitment requires confirmation through the Request a Quote form on this page. The quote process can establish the requested quantity, packaging, date code, traceability, and expected shipment timing. For automotive production, also request lot and quality-document information because nominal channel inventory does not by itself confirm suitability for the intended qualification or traceability requirements.
What is the best Microchip equivalent for ATSAMD21G17D-AF?
The closest Microchip options listed for ATSAMD21G17D-AF are ATSAMD21G17D-AFT, ATSAMD21G17D-AUT, and factory-programmable ATSAMD21G17D-AZT. Each is associated with the same 48 MHz Cortex-M0+ SAM D21G architecture and 128 KB flash configuration, and the first two use the 48-pin TQFP package. ATSAMD21G17D-AZT is especially relevant when factory programming is required. Microchip’s family datasheet confirms that supported SAM D21 devices offer pin-compatible migration paths.

داده‌های مرجع مهندسی برای ATSAMD21G17D-AF — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ATSAMD21G17D-AF for a 48-pin TQFP automotive design that specifically requires the published AEC-Q100 and functional-safety configuration of the ATSAMD21G17D family. Choose ATSAMD21G17D-AFT when the electrical design is unchanged and tape-and-reel production is preferred; choose ATSAMD21G17D-AUT when that ordering configuration satisfies the program’s qualification and supply requirements. ATSAMD21G17D-AZT is the preferred alternative when factory programming must embed production-specific settings. ATSAMC21G17A-AUT provides another Microchip option identified as AEC-Q100 Grade 1 and SAM D21 drop-in compatible, but its firmware target, memory details, and qualification documentation should be reviewed. In every case, verify the exact pin assignment, temperature grade, USB configuration, programming method, and lifecycle commitment before releasing the PCB design.

مقایسه با جایگزین‌ها

پارامتر این محصول ATSAMD21G17D-AFT ATSAMD21G17D-AUT ATSAMD21G17D-AZT ATSAMC21G17A-AUT
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 48-pin TQFP (7 mm × 7 mm) 48-pin TQFP (7 mm × 7 mm) 48-pin TQFP (7 mm × 7 mm) 48-pin TQFP (7 mm × 7 mm) 48-pin TQFP option
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum Frequency 48 MHz 48 MHz 48 MHz 48 MHz Up to 48 MHz

تفاوت‌های کلیدی

  • Automotive-grade ordering option with functional-safety positioning (در مقابلATSAMD21G17D-AUT)
  • Manufacturing-ready tape-and-reel option (در مقابلATSAMD21G17D-AF)
  • Factory-programmable production path (در مقابلATSAMD21G17D-AF)
  • Automotive Grade 1 family alternative (در مقابلATSAMD21G17D-AF)

یادداشت‌های طراحی

Design the supply network for the full 1.6 V to 3.6 V operating range and place the required local decoupling capacitors close to the corresponding power pins. Review the exact pin names and capacitor values in the SAM D21/DA1 family datasheet because VDD, VDDCORE, and any externally supplied reference or I/O rails may have different bypass requirements. Keep switching converters and inductors away from sensitive analog and clock routing, and verify startup behavior across all power states.

Follow the manufacturer 48-pin TQFP land pattern and pin-1 orientation rather than constructing the footprint from dimensions alone. Preserve clear copper around the exposed ground structure if the selected package option requires a thermal or electrical pad, and route high-current ground returns without splitting the ground plane unnecessarily. USB, oscillator, and high-speed serial lines should use short paths, continuous reference planes, and no abrupt stubs, with test points placed where they will not disturb signal integrity.

Do not assume that every 48-pin SAM D21 ordering code is a production drop-in equivalent. ATSAMD21G17D-AFT, ATSAMD21G17D-AUT, and ATSAMD21G17D-AZT differ in ordering or production configuration, so verify temperature grade, qualification, factory programming, reel or tray format, firmware, and ordering restrictions before substitution. Also check every multiplexed peripheral function against the pin table; two peripherals may appear electrically compatible while assigning the same pin.

Keep clock and serial traces short, provide continuous return paths beneath them, and avoid routing high-speed signals across split power or ground planes. The 48 MHz Cortex-M0+ core permits deterministic embedded timing, but external oscillator, USB, and communications routing still require controlled impedance and minimized loop area. Validate edge rates, loading, and peripheral timing at the system level rather than relying only on the nominal 48 MHz clock frequency.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The part is identified as AEC-Q100 automotive-grade. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not explicitly stated and therefore remain unknown.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

atsamd21g17d azvao ATSAMD21G17D-AF datasheet ATSAMD21G17D-AF pinout ATSAMD21G17D datasheet pdf ATSAMD21G17D-AF equivalent ATSAMD21G17D-AF replacement ATSAMD21G17D-AF cross reference ATSAMD21G17D-AF footprint ATSAMD21G17D-AF price ATSAMD21G17D-AF stock Microchip ATSAMD21G17D-AF ATSAMD21G17D 48 TQFP pinout ATSAMD21G17D application circuit ATSAMD21G17D-AF vs ATSAMD21G17D-AFT 48MHz Cortex-M0+ 128KB flash TQFP

قطعات و اصطلاحات مرتبط

Microchip Technology ATSAMD21G17D-AF ATSAMD21G17 ATSAMD21G17D-AFT ATSAMD21G17D-AUT ATSAMD21G17D-AZT ATSAMC21G17A-AUT Arm Cortex-M0+ 32-bit microcontroller embedded microcontroller embedded processor programmable control IC SAM D21 TQFP-48 TQFP package family surface-mount package 128 KB flash memory 16 KB SRAM 4 KB read-while-write memory 48 MHz AEC-Q100 Functional Safety USB DMA PWM
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ