ATSAMD21G17D-AF - 48MHz Cortex-M0+ MCU | Microchip
MPN: ATSAMD21G17D-AF ✓ ActiveATSAMD21G17D-AF Overview
A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, analog conversion functions, timers, and general-purpose input/output into one device. The Cortex-M0+ architecture provides compact, energy-efficient 32-bit processing, while the ATSAMD21G17D-AF places it in the hierarchy of embedded microcontroller, embedded processor, and programmable control IC. This combination suits systems that need deterministic control and mixed signal connectivity without a complex processor or external discrete components.
The ATSAMD21G17D-AF provides 128 KB of flash, 16 KB of SRAM, and 4 KB of read-while-write memory. According to the Microchip SAM D21/DA1 family datasheet DS40001882H, the family operates up to 48 MHz and reaches 2.46 CoreMark/MHz. The device also supports USB connectivity and integrates 12 DMA channels, nine timers, and six serial communication interfaces covering USART, SPI, I2C, I2S, and LIN functions.
Its peripheral set includes advanced analog and PWM resources, allowing the MCU to supervise external sensors, control actuators, sample analog signals, and generate precise timing signals without excessive external circuitry. The SAM D21 family supports pin-compatible migration paths between devices in the series, helping preserve PCB layouts when memory, temperature grade, qualification, or production configuration requirements change. Its linear address map and compatible peripheral architecture also simplify firmware migration within the family.
Typical uses include automotive control modules, home automation equipment, consumer products, metering systems, industrial controllers, and compact embedded control nodes. USB connectivity makes the device suitable for USB-connected configuration, diagnostics, or peripheral control, while the mixed analog and PWM resources benefit designs that combine sensing with real-time output control. The 48-TQFP package also provides a conventional leaded footprint suitable for manufacturing and inspection.
Design around the 1.6 V to 3.6 V operating range and verify the exact temperature grade, qualification, and factory-programming requirements for the selected ordering code. Decoupling, signal integrity, USB routing, and programming access require attention even though the device integrates many resources. Use the manufacturer pin-description table and family reference design when assigning tracks and programming tools.
This product overview consolidates the principal electrical, memory, package, peripheral, qualification, and sourcing information for ATSAMD21G17D-AF, then adds application guidance, drop-in alternatives, and engineering considerations that help engineers evaluate the MCU before schematic capture.
Drop-in alternatives for ATSAMD21G17D-AF — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ATSAMD21G17D-AF (same form factor and footprint) — differing in Package, ADC, Operating Temperature, RoHS Status, DAC.
ATSAMD21G17D-AFT
✅ Drop-InContact for price
View Datasheet →ATSAMD21G17D-AUT
✅ Drop-InContact for price
View Datasheet →ATSAMD21G17D-AZT
✅ Drop-In📋 Reference alternative (not in catalog)
ATSAMC21G17A-AUT
✅ Drop-InContact for price
View Datasheet →ATSAMD21G17D-AF Maximum Ratings & Electrical Characteristics
| CPU Architecture | 32-bit Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Core Performance | 2.46 CoreMark/MHz |
| Program Flash Memory | 128 KB |
| SRAM | 16 KB |
| Read-While-Write Memory | 4 KB |
| Operating Voltage Range | 1.6 V to 3.6 V |
| Maximum Temperature | 125 °C |
| Package | 48-pin TQFP, 7 mm × 7 mm |
| Mounting Type | Surface mount |
| DMA Channels | 12 channels |
| Timers | 9 timers |
| Serial Communication Interfaces | 6 interfaces |
| Supported Serial Interfaces | USART, SPI, I2C, I2S, and LIN |
| USB Connectivity | Supported |
| Automotive Qualification | AEC-Q100 |
| Functional Safety Classification | Functional Safety (FuSa) |
| RoHS Status | Unknown |
| REACH Status | Unknown |
ATSAMD21G17D-AF 48-pin tqfp, 7 mm × 7 mm Pin Configuration Guide
Pin configuration for ATSAMD21G17D-AF (48-pin tqfp, 7 mm × 7 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for ATSAMD21G17D-AF.
Refer to the datasheet for full pin configuration.
Typical Applications
ATSAMD21G17D-AF is suitable for 6 applications: Automotive Control Modules, Industrial Metering and Sensing, Home Automation Controllers, USB-Connected Embedded Products, Precision Timing and PWM Control, Consumer and Utility Electronics.
Automotive Control Modules
The ATSAMD21G17D-AF fits compact vehicle control modules that combine low-power 32-bit processing with real-time peripherals. Its 48 MHz Cortex-M0+ core, 12 DMA channels, and nine timers support actuator control and periodic signal handling, while USART, SPI, I2C, I2S, and LIN interfaces connect vehicle networks and sensors. The AEC-Q100 identification is especially relevant for automotive qualification programs. Designers should use the 1.6 V to 3.6 V operating range to define the power architecture and verify the exact 125 °C ordering-code requirements.
Recommended
Industrial Metering and Sensing
The ATSAMD21G17D-AF is appropriate for metering and industrial sensing nodes that must acquire analog information and report it through embedded communications. Its advanced analog resources, 12 DMA channels, and nine timers reduce the need for separate data-acquisition circuitry, while 128 KB of flash stores application code and 16 KB of SRAM supports working buffers. USB, USART, SPI, I2C, and LIN provide flexible links to host systems and field equipment. The small 7 mm × 7 mm TQFP package also suits densely populated instrument electronics.
Recommended
Home Automation Controllers
The ATSAMD21G17D-AF can serve as the local control hub in a home automation system that coordinates sensors, relays, lighting, and communications. Its low-power Cortex-M0+ architecture supports responsive embedded control, and the six serial interfaces allow SPI, I2C, USART, and other protocol peripherals to share the device. Nine timers support dimming, pulse generation, and periodic tasks, while 4 KB of read-while-write memory allows selected data regions to be updated without stopping instruction execution from that area.
Recommended
USB-Connected Embedded Products
The ATSAMD21G17D-AF is well suited to compact USB-connected products requiring configuration, diagnostics, or data exchange with a host. Its USB connectivity operates alongside 12 DMA channels for efficient data movement, while the 48 MHz Cortex-M0+ core handles protocol and application tasks. The 128 KB flash and 16 KB SRAM provide a practical balance for embedded firmware, and the 48-pin TQFP footprint simplifies assembly into industrial, consumer, and instrumentation boards.
Recommended
Precision Timing and PWM Control
The ATSAMD21G17D-AF fits motor, lighting, and signal-generation subsystems that require several independent timing functions. Its nine timers support PWM generation, capture, periodic interrupts, and timing references, while the 48 MHz Cortex-M0+ processor performs supervisory control. Twelve DMA channels can move timing and peripheral data with reduced processor intervention. For power conversion or LED systems, designers should review timer trigger paths and pin multiplexing in the manufacturer datasheet before assigning outputs.
Recommended
Consumer and Utility Electronics
The ATSAMD21G17D-AF can support programmable control, user interfaces, and communications in consumer and utility equipment. Its 48 MHz Cortex-M0+ core offers responsive control without a high-power application processor, and the integrated analog, timer, and serial resources reduce board area. USB provides a convenient local connection to configuration tools or accessories, while the 1.6 V to 3.6 V supply range enables integration with common low-voltage power systems. Firmware designers should use the pin table to share peripheral functions without electrical conflicts.
Recommended
Recommended Products Summary
Engineering reference data for ATSAMD21G17D-AF — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ATSAMD21G17D-AFT | ATSAMD21G17D-AUT | ATSAMD21G17D-AZT | ATSAMC21G17A-AUT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-pin TQFP (7 mm × 7 mm) | 48-pin TQFP (7 mm × 7 mm) | 48-pin TQFP (7 mm × 7 mm) | 48-pin TQFP (7 mm × 7 mm) | 48-pin TQFP option |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | Up to 48 MHz |
Key Differentiators
- Automotive-grade ordering option with functional-safety positioning (vs ATSAMD21G17D-AUT)
- Manufacturing-ready tape-and-reel option (vs ATSAMD21G17D-AF)
- Factory-programmable production path (vs ATSAMD21G17D-AF)
- Automotive Grade 1 family alternative (vs ATSAMD21G17D-AF)
Design Notes
Design the supply network for the full 1.6 V to 3.6 V operating range and place the required local decoupling capacitors close to the corresponding power pins. Review the exact pin names and capacitor values in the SAM D21/DA1 family datasheet because VDD, VDDCORE, and any externally supplied reference or I/O rails may have different bypass requirements. Keep switching converters and inductors away from sensitive analog and clock routing, and verify startup behavior across all power states.
Follow the manufacturer 48-pin TQFP land pattern and pin-1 orientation rather than constructing the footprint from dimensions alone. Preserve clear copper around the exposed ground structure if the selected package option requires a thermal or electrical pad, and route high-current ground returns without splitting the ground plane unnecessarily. USB, oscillator, and high-speed serial lines should use short paths, continuous reference planes, and no abrupt stubs, with test points placed where they will not disturb signal integrity.
Do not assume that every 48-pin SAM D21 ordering code is a production drop-in equivalent. ATSAMD21G17D-AFT, ATSAMD21G17D-AUT, and ATSAMD21G17D-AZT differ in ordering or production configuration, so verify temperature grade, qualification, factory programming, reel or tray format, firmware, and ordering restrictions before substitution. Also check every multiplexed peripheral function against the pin table; two peripherals may appear electrically compatible while assigning the same pin.
Keep clock and serial traces short, provide continuous return paths beneath them, and avoid routing high-speed signals across split power or ground planes. The 48 MHz Cortex-M0+ core permits deterministic embedded timing, but external oscillator, USB, and communications routing still require controlled impedance and minimized loop area. Validate edge rates, loading, and peripheral timing at the system level rather than relying only on the nominal 48 MHz clock frequency.
Compliance Information
The part is identified as AEC-Q100 automotive-grade. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not explicitly stated and therefore remain unknown.