Microchip Technology

ATXMEGA32D4-MHK - 32MHz AVR Microcontroller | Microchip

MPN: ATXMEGA32D4-MHK ✓ فعال
1.6 V to 3.6 V Vdss 44-VQFN, 7 mm × 7 mm Package 32 MHz Speed 32 KB Memory
حداقل سفارش: 1 |

ATXMEGA32D4-MHK نمای کلی

The Microchip ATXMEGA32D4-MHK is an 8/16-bit AVR XMEGA microcontroller operating at up to 32 MHz, with 32 KB of ISP Flash memory, 1 KB of EEPROM, and 4 KB of SRAM in a 44-VQFN surface-mount package. The device combines a 1.6 V to 3.6 V operating range with 34 general-purpose I/O lines and a four-channel event system, making it suitable for compact embedded control, industrial automation, communications, and signal-processing systems.

An AVR XMEGA microcontroller is an enhanced RISC-based embedded controller within the broader semiconductor and microcontroller hierarchy. The XMEGA family combines high-performance 8/16-bit processing, programmable timing resources, flexible event routing, serial communication peripherals, and substantial memory in devices designed for low-power, peripheral-rich applications. Its 32 MHz maximum clock rate supports faster control-loop execution and more responsive handling of communication and timing tasks than many earlier 8-bit AVR devices.

The ATXMEGA32D4 family provides four flexible 16-bit timer/counter blocks with compare and PWM channels, two USARTs, two two-wire serial interfaces, a four-channel event system, and a programmable multilevel interrupt controller. A dedicated 16-bit real-time counter supports timekeeping, while the 32 KB Flash area includes a 4 KB boot-code section. Read-while-write operation allows the application to execute code from Flash during programming, supporting controlled field updates.

ATXMEGA32D4-MHK is the -MHK ordering option in the 44-VQFN, 7 mm × 7 mm package family. Its peripheral mix allows designers to consolidate functions that would otherwise require separate timers, serial controllers, or interface logic. The four-channel event system is particularly useful for deterministic sensor sampling, waveform generation, and direct routing of timer events to peripherals without routing every action through central interrupt handling.

Typical uses include industrial sensor nodes, building-control equipment, compact motor controllers, battery-powered instruments, communication modules, and low-power data-acquisition systems. A 32 MHz clock can shorten control-loop latency, while 34 I/O lines reduce the need for I/O expanders in small systems. For designs requiring multiple analog or communications functions, the integrated USART and TWI resources help preserve board area and reduce firmware overhead.

Designers should verify the exact 44-lead pin assignment, exposed-pad connection, decoupling requirements, clock configuration, programming interface, and operating-temperature grade in the manufacturer datasheet before layout release. The package also requires a thermal and return-path layout that limits ground-plane disruption. Firmware should use the documented boot and application sections when planning field updates, and peripheral clocks should be enabled only when needed to reduce power consumption.

This product summary combines the manufacturer device description, the XMEGA D4 datasheet feature set, the exact -MHK package designation, and practical guidance for firmware, PCB, and power-supply decisions. It also identifies where pin-level and environmental details require direct verification against the official documentation.

جایگزین‌های drop-in برای ATXMEGA32D4-MHK — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

ATXMEGA32D4-MHK حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 8/16-bit AVR XMEGA microcontroller
Maximum CPU Frequency 32 MHz
Operating Voltage Range 1.6 V to 3.6 V
Flash Memory 32 KB
Flash Organization 16K × 16 words
Boot Code Section 4 KB
EEPROM Memory 1 KB
SRAM 4 KB
General-Purpose I/O Lines 34
Event System Channels 4 channels
Timer/Counter Blocks 4 flexible 16-bit blocks
Real-Time Counter 16-bit
UART Count 2
Two-Wire Interface Count 2
بسته‌بندی 44-VQFN, 7 mm × 7 mm
نوع نصب Surface mount
Read-While-Write Flash Supported
Programmable Multilevel Interrupt Controller Supported

راهنمای پیکربندی پین ATXMEGA32D4-MHK 44-vqfn, 7 mm × 7 mm

پیکربندی پین برای ATXMEGA32D4-MHK (پکیج 44-vqfn, 7 mm × 7 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 44-vqfn, 7 mm × 7 mm برای ATXMEGA32D4-MHK

داده پین‌آوت تفصیلی موجود نیست برای ATXMEGA32D4-MHK.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATXMEGA32D4-MHK مناسب است برای 6 کاربردs: Industrial Sensor and Control Nodes, Battery-Powered Instrumentation, Communication Modules, Timing-Critical Motor Control, Building and HVAC Equipment, Data Acquisition and Signal Conditioning.

🏭

Industrial Sensor and Control Nodes

The ATXMEGA32D4-MHK is well suited to compact industrial sensor nodes because its 1.6 V to 3.6 V operating range, 34 I/O lines, and 32 MHz processing support responsive acquisition and local control. Four 16-bit timer/counters can measure pulse width, frequency, or duty cycle, while the four-channel event system can route timer events directly to peripherals for more deterministic timing. Two USARTs and two TWI interfaces allow the controller to manage local sensors and service communications without relying on additional serial devices. The 32 KB Flash and 4 KB SRAM provide room for protocol handling, calibration data, and control logic.

🔋

Battery-Powered Instrumentation

The ATXMEGA32D4-MHK can serve as the control core in battery-powered instruments where a 1.6 V to 3.6 V operating range and a 32 MHz CPU are important. Its low-power AVR XMEGA architecture allows firmware to disable unused peripherals and spend more time in low-power states between measurements. The 1 KB EEPROM is useful for calibration constants and configuration, while the 4 KB boot section supports controlled firmware updates. Designers should still calculate regulator efficiency and average current from the actual sensor duty cycle because peripheral activity and clock speed materially affect battery life.

🌐

Communication Modules

The ATXMEGA32D4-MHK fits compact communication modules that require multiple serial interfaces and deterministic event handling. Two USARTs can connect a host or local radio circuitry, while two two-wire serial interfaces support sensors, EEPROMs, or expansion devices. The four-channel event system can synchronize transmission windows with timer events, helping reduce the need for polling and software timing loops. At 32 MHz, the controller also has useful headroom for protocol framing, buffering, error handling, and application logic while retaining 4 KB of SRAM for working data.

🔧

Timing-Critical Motor Control

The ATXMEGA32D4-MHK is appropriate for compact motor-control and signal-generation tasks where predictable timing is more important than a large application processor. Its four flexible 16-bit timer/counter blocks provide dedicated resources for frequency, pulse-width, compare, and PWM operations, while the four-channel event system can connect timing events directly to peripherals. At up to 32 MHz, control calculations can be executed with lower latency than on many lower-frequency 8-bit MCUs. The 44-VQFN footprint supports space-constrained boards, although power-stage design, current sensing, and thermal management remain outside the MCU’s integrated functions.

🏠

Building and HVAC Equipment

The ATXMEGA32D4-MHK can act as a local controller in building-control, HVAC, or environmental equipment where multiple discrete signals and serial sensors must be coordinated. Its 34 I/O lines provide substantial direct connectivity, and two USARTs plus two TWI ports permit integration of local modules without excessive glue logic. The four 16-bit timers support periodic measurement and output timing, while the 32 MHz CPU provides useful responsiveness for setpoint logic and fault handling. A 1.6 V to 3.6 V operating range also eases integration with compatible low-voltage sensor and communication circuitry.

📟

Data Acquisition and Signal Conditioning

The ATXMEGA32D4-MHK is useful in small data-acquisition and signal-conditioning systems that need periodic sampling, local filtering, and flexible peripheral interaction. Four 16-bit timer/counter blocks can establish sampling intervals or measure external timing events, and the event system can route signals between timing blocks and communication peripherals. The 32 KB Flash supports firmware for acquisition sequencing and calibration, while 1 KB of EEPROM can retain nonvolatile configuration. Designers should account for the MCU’s 1.6 V to 3.6 V operating range when selecting analog front ends, references, and external interface components.

What are the key specifications of ATXMEGA32D4-MHK that engineers should know?
The ATXMEGA32D4-MHK is a 32 MHz, 8/16-bit AVR XMEGA microcontroller with 32 KB Flash, 1 KB EEPROM, 4 KB SRAM, 34 I/O lines, and a 44-VQFN package. According to the manufacturer datasheet, the device also provides four 16-bit timer/counters, two USARTs, two two-wire serial interfaces, a four-channel event system, and a 16-bit real-time counter. Its 1.6 V to 3.6 V operating range supports low-voltage embedded systems, while read-while-write Flash and a dedicated 4 KB boot section support controlled firmware updates.
What is the operating voltage of ATXMEGA32D4-MHK?
The ATXMEGA32D4-MHK operates from 1.6 V to 3.6 V according to the ATXMEGA32D4 family specifications. This range accommodates low-voltage industrial, embedded-control, and battery-powered designs that cannot use a 5 V supply directly. The supply rails, decoupling capacitors, voltage tolerance, and power-sequencing requirements should be checked against the complete manufacturer datasheet before the PCB is finalized.
How much memory does ATXMEGA32D4-MHK have?
The ATXMEGA32D4-MHK includes 32 KB of ISP Flash, 1 KB of EEPROM, and 4 KB of SRAM. The manufacturer states that the Flash includes a 4 KB boot-code section and supports read-while-write operation. This arrangement supports application firmware, boot recovery, configuration storage, and runtime state without requiring external memory.
Where can I download the ATXMEGA32D4-MHK datasheet PDF?
The official ATXMEGA D4 family datasheet is available from Microchip Technology at the manufacturer download link on this page. It covers ATxmega16D4, ATxmega32D4, ATxmega64D4, and ATxmega128D4 devices and is the controlling reference for the -MHK package, electrical characteristics, pin functions, memory organization, clocking, and peripheral behavior. Use the manufacturer document rather than a mirror when validating production design decisions.
Where can I find the ATXMEGA32D4-MHK pinout?
The ATXMEGA32D4-MHK pin assignment is documented in the pin-description tables of the official ATXMEGA D4 family datasheet. The exact device uses a 44-VQFN, 7 mm × 7 mm package, and every PCB assignment should be checked against those tables, including power pins, exposed-pad requirements, programming signals, analog functions, and alternate peripheral mappings. The manufacturer datasheet is the authoritative source for the complete 44-pin arrangement.
What can replace ATXMEGA32D4-MHK?
A true drop-in replacement for ATXMEGA32D4-MHK must use the same 44-VQFN footprint, preserve pin assignments, and match the essential 32 MHz, memory, and peripheral characteristics. No independently confirmed cross-brand equivalent is identified for the exact -MHK ordering option. Before accepting a substitute, verify its complete pin map, Flash and SRAM sizes, peripheral mix, voltage range, clock behavior, programming protocol, and package thermal pad requirements.
What is the best drop-in replacement for ATXMEGA32D4-MHK?
The best drop-in replacement is the exact Microchip Technology ATXMEGA32D4-MHK ordering option because no other independently verified 44-VQFN device has been established as a complete functional and pin-compatible substitute. A related ATXMEGA32D4 package code may remain electrically similar while changing temperature grade, package, or ordering information, so it should not be treated as a drop-in replacement without a complete package and pin comparison. Request a current availability and sourcing assessment through the Request a Quote form on this page.
Is ATXMEGA32D4-MHK suitable for low-power embedded control?
Yes, the ATXMEGA32D4-MHK is suitable for low-power embedded control when the system operates within its 1.6 V to 3.6 V range and unused peripherals are disabled. Its low-power AVR XMEGA architecture, event system, four 16-bit timer/counters, and 32 MHz processing mode support responsive control without requiring a larger MCU. Final battery-life calculations should include regulator losses, sensor duty cycle, Flash wait states, and the selected sleep modes.
What is the difference between ATXMEGA32D4-MHK and ATXMEGA32D4-CUR?
Both devices belong to the 32 KB ATXMEGA32D4 family and support a 1.6 V to 3.6 V operating range, but their ordering codes identify different package or qualification options. The -MHK target is explicitly a 44-VQFN, 7 mm × 7 mm device. Before substituting -CUR, compare its complete package drawing and pin map against the -MHK land pattern; a shared family name does not by itself establish pin-to-pin compatibility.
When should I choose ATXMEGA32D4-MHK over another AVR microcontroller?
Choose the ATXMEGA32D4-MHK when a design needs the combination of 32 MHz processing, 32 KB Flash, 4 KB SRAM, 34 I/O lines, four 16-bit timers, two USARTs, two TWI ports, and deterministic event routing in a 44-VQFN package. It is less suitable when a smaller package, greater memory, a different serial architecture, or an ecosystem already standardized on another MCU family is required. The device is particularly useful when timing and peripheral integration matter more than using the smallest possible footprint.
Is ATXMEGA32D4-MHK suitable for industrial automation?
Yes, the ATXMEGA32D4-MHK fits compact industrial automation and sensor-node designs because it combines a 1.6 V to 3.6 V supply range with 34 I/O lines and dedicated timing and communications peripherals. The four-channel event system can connect timers and sensors deterministically, while two USARTs and two TWI interfaces support local sensors and service buses. Industrial qualification details and the exact temperature grade should be confirmed before deployment in a regulated environment.
How does the ATXMEGA32D4-MHK event system help a design?
The ATXMEGA32D4-MHK event system provides four channels for routing signals between timer/counter units and peripherals. According to the manufacturer datasheet, this peripheral-rich architecture lets timer events trigger actions without requiring every event to pass through a central interrupt handler. That can improve timing determinism, reduce interrupt overhead, and simplify designs that synchronize sampling, waveform generation, or communication timing.
What tooling is compatible with ATXMEGA32D4-MHK programming?
The ATXMEGA32D4-MHK is programmed through the programming and boot mechanisms documented for the AVR XMEGA family. The manufacturer datasheet identifies the dedicated programming interface and supports ISP Flash programming with read-while-write capability. Engineers should use a programmer and toolchain compatible with AVR XMEGA devices, observe the documented voltage levels, and include the boot-code section in any controlled firmware-update design.
Where can I buy ATXMEGA32D4-MHK and check its lead time?
Use the Request a Quote form on this page to request current ATXMEGA32D4-MHK availability, lead time, minimum order quantity, and quantity-break handling. The product is identified as an active Microchip Technology device, but live inventory and lead time can change with manufacturer and distribution conditions. The form is the appropriate channel for a current sourcing commitment rather than relying on an outdated catalog figure.
What is the price of ATXMEGA32D4-MHK?
The current commercial price of ATXMEGA32D4-MHK should be requested through the Request a Quote form on this page. The form can account for the requested quantity, package suffix, delivery destination, and current market conditions. No static price should be substituted for a live quote because component pricing and inventory can change independently of the device’s technical specifications.

داده‌های مرجع مهندسی برای ATXMEGA32D4-MHK — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ATXMEGA32D4-MHK when the design needs a 32 MHz AVR XMEGA controller with 32 KB Flash, 1 KB EEPROM, 4 KB SRAM, 34 I/O lines, and multiple timing and serial peripherals in a 44-VQFN package. It is a strong fit for industrial nodes, local data loggers, building controls, communication modules, and deterministic signal-generation systems. Choose a different ATXMEGA32D4 package code only after confirming temperature grade, pin map, exposed-pad treatment, and qualification requirements. If a replacement must be introduced during lifecycle management, treat it as a redesign unless the manufacturer explicitly confirms a pin-compatible package. Cross-brand alternatives should be considered only after firmware, timing, analog, programming, and power behavior are fully validated because no independently confirmed drop-in equivalent is established here.

مقایسه با جایگزین‌ها

پارامتر این محصول
Brand Microchip Technology
Package 44-VQFN, 7 mm × 7 mm
Maximum CPU Frequency 32 MHz
Operating Voltage Range 1.6 V to 3.6 V
Flash Memory 32 KB
EEPROM Memory 1 KB
SRAM 4 KB
General-Purpose I/O Lines 34
Timer/Counter Blocks 4 flexible 16-bit blocks
Serial Interfaces 2 USARTs and 2 TWI interfaces

تفاوت‌های کلیدی

  • High peripheral integration for a compact 44-VQFN design (در مقابلATXMEGA32D4-CUR)
  • 32 MHz processing with dedicated timing resources (در مقابلATXMEGA32D3-MHR)
  • Deterministic peripheral event routing (در مقابلATXMEGA16C4-MHR)

یادداشت‌های طراحی

Assign the 44-VQFN land pattern directly from the manufacturer pin-description table and keep the exposed-pad connection consistent with the electrical requirements for the specific -MHK variant. Place the required supply capacitors adjacent to their assigned VDD and ground pins, and preserve a continuous ground reference beneath the device. Because no VQFN-44 package drawing is present in the supported SVG library, do not infer pad geometry from a VQFN-20 footprint.

Design the supply around the documented 1.6 V to 3.6 V operating range and account for startup, transient response, and the current required by the selected CPU and peripheral clock settings. Keep sensitive analog and communication supply paths short, and use the manufacturer-recommended capacitance and ESR requirements rather than generic bulk decoupling values. Verify brownout behavior, programming voltages, and peripheral-specific supply constraints against the complete datasheet.

Do not treat other ATXMEGA32D4 package codes as automatic substitutes for ATXMEGA32D4-MHK. Package suffix changes can alter pin availability, temperature grade, qualification, or lead finish even when Flash, SRAM, and clock ratings remain similar. For an approved redesign, compare every numbered pin, the exposed pad, programming signals, reset behavior, analog channels, and alternate peripheral functions before transferring the schematic or footprint.

Route the 32 MHz clock using short, symmetric connections, provide the required source and load components, and keep the clock away from sensitive analog inputs wherever the PCB stack-up permits. If the event system or timer outputs drive external signals, check rise time, fan-out, and ground-current paths rather than relying only on nominal timing values. Firmware should also avoid unnecessary peripheral clock gating, which can reduce supply noise and improve timing margin.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer product page and family datasheet establish the device identity and technical functions, but the cited material does not explicitly state the requested compliance statuses. The -MHK ordering code alone is not treated as proof of AEC-Q100 qualification, lead-free construction, or halogen-free status.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ATXMEGA32D4-MHK ATXMEGA32D4-MHK datasheet ATXMEGA32D4-MHK datasheet pdf ATXMEGA32D4-MHK pinout ATXMEGA32D4-MHK equivalent ATXMEGA32D4-MHK replacement ATXMEGA32D4-MHK cross reference ATXMEGA32D4-MHK vs ATXMEGA32D4-CUR ATXMEGA32D4-MHK 44 VQFN ATXMEGA32D4-MHK price ATXMEGA32D4-MHK stock Microchip ATXMEGA32D4-MHK

قطعات و اصطلاحات مرتبط

Microchip Technology ATXMEGA32D4-MHK ATXMEGA32D4 ATXMEGA32D4-CUR ATXMEGA32D3-MHR ATXMEGA16C4-MHR AVR XMEGA 8/16-bit microcontroller enhanced RISC architecture embedded controller semiconductor 32 MHz 32 KB Flash 1 KB EEPROM 4 KB SRAM four-channel event system 16-bit timer/counter USART two-wire serial interface programmable multilevel interrupt controller 44-VQFN QFN family surface mount read-while-write
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ