ATXMEGA32D4-MHK - 32MHz AVR Microcontroller | Microchip
料号: ATXMEGA32D4-MHK ✓ 量产中ATXMEGA32D4-MHK 概述
An AVR XMEGA microcontroller is an enhanced RISC-based embedded controller within the broader semiconductor and microcontroller hierarchy. The XMEGA family combines high-performance 8/16-bit processing, programmable timing resources, flexible event routing, serial communication peripherals, and substantial memory in devices designed for low-power, peripheral-rich applications. Its 32 MHz maximum clock rate supports faster control-loop execution and more responsive handling of communication and timing tasks than many earlier 8-bit AVR devices.
The ATXMEGA32D4 family provides four flexible 16-bit timer/counter blocks with compare and PWM channels, two USARTs, two two-wire serial interfaces, a four-channel event system, and a programmable multilevel interrupt controller. A dedicated 16-bit real-time counter supports timekeeping, while the 32 KB Flash area includes a 4 KB boot-code section. Read-while-write operation allows the application to execute code from Flash during programming, supporting controlled field updates.
ATXMEGA32D4-MHK is the -MHK ordering option in the 44-VQFN, 7 mm × 7 mm package family. Its peripheral mix allows designers to consolidate functions that would otherwise require separate timers, serial controllers, or interface logic. The four-channel event system is particularly useful for deterministic sensor sampling, waveform generation, and direct routing of timer events to peripherals without routing every action through central interrupt handling.
Typical uses include industrial sensor nodes, building-control equipment, compact motor controllers, battery-powered instruments, communication modules, and low-power data-acquisition systems. A 32 MHz clock can shorten control-loop latency, while 34 I/O lines reduce the need for I/O expanders in small systems. For designs requiring multiple analog or communications functions, the integrated USART and TWI resources help preserve board area and reduce firmware overhead.
Designers should verify the exact 44-lead pin assignment, exposed-pad connection, decoupling requirements, clock configuration, programming interface, and operating-temperature grade in the manufacturer datasheet before layout release. The package also requires a thermal and return-path layout that limits ground-plane disruption. Firmware should use the documented boot and application sections when planning field updates, and peripheral clocks should be enabled only when needed to reduce power consumption.
This product summary combines the manufacturer device description, the XMEGA D4 datasheet feature set, the exact -MHK package designation, and practical guidance for firmware, PCB, and power-supply decisions. It also identifies where pin-level and environmental details require direct verification against the official documentation.
直接替换替代料: ATXMEGA32D4-MHK ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料ATXMEGA32D4-MHK 最大额定值与电气特性
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Operating Voltage Range | 1.6 V to 3.6 V |
| Flash Memory | 32 KB |
| Flash Organization | 16K × 16 words |
| Boot Code Section | 4 KB |
| EEPROM Memory | 1 KB |
| SRAM | 4 KB |
| General-Purpose I/O Lines | 34 |
| Event System Channels | 4 channels |
| Timer/Counter Blocks | 4 flexible 16-bit blocks |
| Real-Time Counter | 16-bit |
| UART Count | 2 |
| Two-Wire Interface Count | 2 |
| 封装 | 44-VQFN, 7 mm × 7 mm |
| 安装类型 | Surface mount |
| Read-While-Write Flash | Supported |
| Programmable Multilevel Interrupt Controller | Supported |
ATXMEGA32D4-MHK 44-vqfn, 7 mm × 7 mm 引脚配置指南
ATXMEGA32D4-MHK(44-vqfn, 7 mm × 7 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATXMEGA32D4-MHK.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATXMEGA32D4-MHK 适用于 6 应用s: Industrial Sensor and Control Nodes, Battery-Powered Instrumentation, Communication Modules, Timing-Critical Motor Control, Building and HVAC Equipment, Data Acquisition and Signal Conditioning.
Industrial Sensor and Control Nodes
The ATXMEGA32D4-MHK is well suited to compact industrial sensor nodes because its 1.6 V to 3.6 V operating range, 34 I/O lines, and 32 MHz processing support responsive acquisition and local control. Four 16-bit timer/counters can measure pulse width, frequency, or duty cycle, while the four-channel event system can route timer events directly to peripherals for more deterministic timing. Two USARTs and two TWI interfaces allow the controller to manage local sensors and service communications without relying on additional serial devices. The 32 KB Flash and 4 KB SRAM provide room for protocol handling, calibration data, and control logic.
推荐
Battery-Powered Instrumentation
The ATXMEGA32D4-MHK can serve as the control core in battery-powered instruments where a 1.6 V to 3.6 V operating range and a 32 MHz CPU are important. Its low-power AVR XMEGA architecture allows firmware to disable unused peripherals and spend more time in low-power states between measurements. The 1 KB EEPROM is useful for calibration constants and configuration, while the 4 KB boot section supports controlled firmware updates. Designers should still calculate regulator efficiency and average current from the actual sensor duty cycle because peripheral activity and clock speed materially affect battery life.
推荐
Communication Modules
The ATXMEGA32D4-MHK fits compact communication modules that require multiple serial interfaces and deterministic event handling. Two USARTs can connect a host or local radio circuitry, while two two-wire serial interfaces support sensors, EEPROMs, or expansion devices. The four-channel event system can synchronize transmission windows with timer events, helping reduce the need for polling and software timing loops. At 32 MHz, the controller also has useful headroom for protocol framing, buffering, error handling, and application logic while retaining 4 KB of SRAM for working data.
推荐
Timing-Critical Motor Control
The ATXMEGA32D4-MHK is appropriate for compact motor-control and signal-generation tasks where predictable timing is more important than a large application processor. Its four flexible 16-bit timer/counter blocks provide dedicated resources for frequency, pulse-width, compare, and PWM operations, while the four-channel event system can connect timing events directly to peripherals. At up to 32 MHz, control calculations can be executed with lower latency than on many lower-frequency 8-bit MCUs. The 44-VQFN footprint supports space-constrained boards, although power-stage design, current sensing, and thermal management remain outside the MCU’s integrated functions.
推荐
Building and HVAC Equipment
The ATXMEGA32D4-MHK can act as a local controller in building-control, HVAC, or environmental equipment where multiple discrete signals and serial sensors must be coordinated. Its 34 I/O lines provide substantial direct connectivity, and two USARTs plus two TWI ports permit integration of local modules without excessive glue logic. The four 16-bit timers support periodic measurement and output timing, while the 32 MHz CPU provides useful responsiveness for setpoint logic and fault handling. A 1.6 V to 3.6 V operating range also eases integration with compatible low-voltage sensor and communication circuitry.
推荐
Data Acquisition and Signal Conditioning
The ATXMEGA32D4-MHK is useful in small data-acquisition and signal-conditioning systems that need periodic sampling, local filtering, and flexible peripheral interaction. Four 16-bit timer/counter blocks can establish sampling intervals or measure external timing events, and the event system can route signals between timing blocks and communication peripherals. The 32 KB Flash supports firmware for acquisition sequencing and calibration, while 1 KB of EEPROM can retain nonvolatile configuration. Designers should account for the MCU’s 1.6 V to 3.6 V operating range when selecting analog front ends, references, and external interface components.
推荐
推荐产品汇总
工程参考数据: ATXMEGA32D4-MHK ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Microchip Technology |
| Package | 44-VQFN, 7 mm × 7 mm |
| Maximum CPU Frequency | 32 MHz |
| Operating Voltage Range | 1.6 V to 3.6 V |
| Flash Memory | 32 KB |
| EEPROM Memory | 1 KB |
| SRAM | 4 KB |
| General-Purpose I/O Lines | 34 |
| Timer/Counter Blocks | 4 flexible 16-bit blocks |
| Serial Interfaces | 2 USARTs and 2 TWI interfaces |
关键差异点
- High peripheral integration for a compact 44-VQFN design (对比 ATXMEGA32D4-CUR)
- 32 MHz processing with dedicated timing resources (对比 ATXMEGA32D3-MHR)
- Deterministic peripheral event routing (对比 ATXMEGA16C4-MHR)
设计说明
Assign the 44-VQFN land pattern directly from the manufacturer pin-description table and keep the exposed-pad connection consistent with the electrical requirements for the specific -MHK variant. Place the required supply capacitors adjacent to their assigned VDD and ground pins, and preserve a continuous ground reference beneath the device. Because no VQFN-44 package drawing is present in the supported SVG library, do not infer pad geometry from a VQFN-20 footprint.
Design the supply around the documented 1.6 V to 3.6 V operating range and account for startup, transient response, and the current required by the selected CPU and peripheral clock settings. Keep sensitive analog and communication supply paths short, and use the manufacturer-recommended capacitance and ESR requirements rather than generic bulk decoupling values. Verify brownout behavior, programming voltages, and peripheral-specific supply constraints against the complete datasheet.
Do not treat other ATXMEGA32D4 package codes as automatic substitutes for ATXMEGA32D4-MHK. Package suffix changes can alter pin availability, temperature grade, qualification, or lead finish even when Flash, SRAM, and clock ratings remain similar. For an approved redesign, compare every numbered pin, the exposed pad, programming signals, reset behavior, analog channels, and alternate peripheral functions before transferring the schematic or footprint.
Route the 32 MHz clock using short, symmetric connections, provide the required source and load components, and keep the clock away from sensitive analog inputs wherever the PCB stack-up permits. If the event system or timer outputs drive external signals, check rise time, fan-out, and ground-current paths rather than relying only on nominal timing values. Firmware should also avoid unnecessary peripheral clock gating, which can reduce supply noise and improve timing margin.
合规信息
The manufacturer product page and family datasheet establish the device identity and technical functions, but the cited material does not explicitly state the requested compliance statuses. The -MHK ordering code alone is not treated as proof of AEC-Q100 qualification, lead-free construction, or halogen-free status.