Texas Instruments

CD4017BM - 10MHz CMOS Decade Counter | Texas Instruments

MPN: CD4017BM ✓ فعال
5 V, 10 V, and 15 V Vdss 20 V Id 16-pin SOIC Package 10 MHz at 10 V peak-to-peak Speed
حداقل سفارش: 1 |

CD4017BM نمای کلی

The Texas Instruments CD4017BM is a CMOS decade counter with ten decoded outputs, a typical operating frequency of 10 MHz at 10 V peak-to-peak, and a 16-pin SOIC package. The device advances one count on each positive clock transition when the clock-inhibit input is low, making it suitable for sequential control, timing, stepper-motor control, lighting sequences, and digital state machines. Its clock input uses Schmitt-trigger action to improve pulse shaping and accommodate slow input rise and fall times.

A decade counter is a sequential digital logic device that cycles through ten states. The CD4017BM combines a counter stage with ten individually decoded outputs, allowing one output to become active for each count state. In the broader semiconductor hierarchy, it belongs to the CD4000 CMOS logic family and functions as a counter and divider within general-purpose logic ICs. Its decoded outputs reduce the need for external binary decoding, simplifying many sequential-control designs.

The CD4017BM operates from the CD4000B series supply range identified in the manufacturer documentation for 5 V, 10 V, and 15 V parametric ratings. Its 10 MHz typical operating frequency is specified at 10 V peak-to-peak, so a power supply at or near 10 V provides the highest stated operating point in the available technical information. The counter also features standardized, symmetrical output characteristics and is tested for quiescent current at 20 V.

The Schmitt-trigger clock input helps reject slow transitions and electrical noise, while the separate clock-inhibit and reset inputs provide flexible control over counting. The ten decoded outputs support cyclic activation of one load at a time. Reset returns the counting sequence to its defined initial state, while clock inhibit allows the count to be held without disconnecting the clock source. These characteristics are useful in industrial controls, test fixtures, indicators, and embedded sequencing systems.

The part is suited to designs requiring more than ten count positions, particularly when individual decoded outputs are preferable to binary-coded outputs. It can implement decade sequencing, programmable timing references, step-counting mechanisms, and rotating indicators. Designers should account for unused outputs, supply decoupling, input pulse timing, and the propagation delays between clock transitions and decoded output changes when constructing reliable control circuits.

A key implementation consideration is that the operating frequency and output timing depend on supply voltage. The 10 MHz figure is a typical condition at 10 V peak-to-peak rather than a guarantee at every supply voltage. Confirm timing margins against the slowest valid supply and verify reset or inhibit behavior before using multiple decoded outputs to control safety-critical loads.

This product page combines the manufacturer-device identity, package information, functional characteristics, practical application guidance, verified source links, and same-footprint replacement information to support faster engineering evaluation and sourcing decisions.

جایگزین‌های drop-in برای CD4017BM — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای CD4017BM (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Logic Family, Mounting Type, Package.

Texas Instruments
Logic Family: CMOS 4000B series
Mounting Type: Through-hole
Package: 16-Pin PDIP (N)
مقایسه با CD4017BM →

CD4017BMG4

✅ جایگزین مستقیم
📦 16-pin SOIC
Same 16-pin SOIC footprint and functionally consistent performance; the G4 suffix identifies the alternative ordering variant with no quantified electrical change.

📋 جایگزین مرجع (خارج از کاتالوگ)

CD4017BE

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 16-pin SOIC
Counter, Decade (divide-by-10) with 10 decoded outputs · CMOS 4000B series · 1 · 10 · Up · Positive edge · 3 V to 18 V · 10 MHz (typ) at VDD = 10 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

CD4017BM حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type CMOS decade counter with 10 decoded outputs
Logic Family CD4000B CMOS
Typical Operating Frequency 10 MHz at 10 V peak-to-peak
Counter Outputs 10 decoded outputs
Number of Counter Elements 1 element
Counter Width 10-bit decade count sequence
Counting Edge Positive clock transition
Clock Input Logic Schmitt-trigger action
Clock Inhibit Input Yes
Reset Input Yes
Parametric Rating Supply Voltages 5 V, 10 V, and 15 V
Quiescent Current Test Voltage 20 V
Output Characteristics Standardized and symmetrical
Operation Mode Fully static
بسته‌بندی 16-pin SOIC
نوع نصب Surface mount

پیکربندی پین CD4017BM

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
پین 1 CLK — Clock input with Schmitt-trigger action
پین 2 CLKINH — Clock inhibit input
پین 3 RESET — Counter reset input
پین 4 Q0 — Decoded counter output 0
پین 5 Q1 — Decoded counter output 1
پین 6 Q2 — Decoded counter output 2
پین 7 Q3 — Decoded counter output 3
پین 8 VSS — Ground reference
پین 9 Q7 — Decoded counter output 7
پین 10 Q6 — Decoded counter output 6
پین 11 Q5 — Decoded counter output 5
پین 12 Q4 — Decoded counter output 4
پین 13 NC — Not connected
پین 14 Q9 — Decoded counter output 9
پین 15 Q8 — Decoded counter output 8
پین 16 VDD — Positive supply voltage

کاربردهای معمول

CD4017BM مناسب است برای 6 کاربردs: Stepper-Motor Phase Sequencing, Sequential LED Lighting, Industrial Test Sequence Control, Timer and Preset Selector, Traffic and Display Sequence Control, Digital State Machine.

⚡

Stepper-Motor Phase Sequencing

The CD4017BM suits basic stepper-motor sequencing because its ten decoded outputs provide sequential phase selection without an external binary decoder. A clock pulse advances one output at a time, while clock inhibit can pause the sequence and reset can establish a known starting phase. The 10 MHz typical operating frequency at 10 V peak-to-peak provides substantial timing margin for ordinary low-rate motor stepping. Because the decoded outputs are logic signals rather than power-stage drivers, the design must use suitable transistor or driver circuitry for the motor windings.

💡

Sequential LED Lighting

The ten decoded outputs of the CD4017BM can rotate a group of indicators or lamps, creating moving-light, chase, or rotating display patterns with a small logic footprint. Each positive clock transition advances one decoded state when clock inhibit remains low. At the documented 10 MHz typical frequency under a 10 V peak-to-peak condition, the counter is far faster than most visual lighting sequences, so a slower clock divider can provide the intended timing. Current limiting and suitable switching stages remain necessary for LEDs or higher-current loads.

🏭

Industrial Test Sequence Control

A decade counter is useful in test fixtures that must activate test points, relay stages, or status indicators in a repeatable sequence. The CD4017BM provides one decoded output per count state, while reset returns the fixture to a known condition and clock inhibit provides a pause control. The Schmitt-trigger clock input improves transition handling for slow or noisy control signals. Fixture timing should be derived from a separate stable oscillator, and output loads must remain within the electrical ratings specified by the manufacturer datasheet.

⏱️

Timer and Preset Selector

The CD4017BM can act as a ten-position timer or preset selector by combining a periodic clock with one of its decoded outputs. A chosen output can become the reference for a downstream timing interval, while reset establishes repeatable starting conditions and clock inhibit can extend a timing sequence. This approach simplifies designs that need more selection points than are available from a simple binary divider. Account for output propagation delay when two decoded states are used to form boundaries, and verify behavior across the intended supply voltage.

🚦

Traffic and Display Sequence Control

The ten decoded outputs support rotating indicators, warning sequences, and multiplexed display phases in control panels. Advancing the counter changes only the selected decoded state, allowing external circuitry to activate the corresponding lamp, relay, or display segment. The Schmitt-trigger clock helps reject slowly changing control transitions, while clock inhibit permits the sequence to be stopped without losing the clock connection. Designers should use suitable isolation or drive circuits for loads and must not treat a logic output as a direct power switch.

🔧

Digital State Machine

For simple sequential systems, the CD4017BM can implement a ten-state controller whose decoded outputs represent distinct phases of an operation. A clock event advances the active phase, reset initializes the process, and clock inhibit holds the current phase. This arrangement is useful for dispensing, batch-control, educational, and prototype sequencing where ten discrete states are required. The counter should be clocked from a clean source, and the design must prevent asynchronous reset or inhibit signals from producing unintended transitions near critical operating boundaries.

What is the operating frequency of the CD4017BM?
The CD4017BM supports a typical operating frequency of 10 MHz when operated at 10 V peak-to-peak. According to the manufacturer datasheet, the operating frequency is a typical value rather than a guarantee across every supply condition, so designers should evaluate timing margins at the lowest voltage used in the target circuit. The 5 V, 10 V, and 15 V parametric ratings indicate that performance should be checked at the intended operating voltage.
What is the CD4017BM and how does it work?
The CD4017BM is a CMOS decade counter with ten decoded outputs in a 16-pin SOIC package. According to the manufacturer datasheet, it advances one count at the positive transition of the clock input when clock inhibit is low. One of the ten outputs becomes active for each count state, enabling sequential stepper control, timing, lighting, or general digital state sequencing without a separate binary-to-decimal decoder.
Where can I download the CD4017BM datasheet PDF?
The official CD4017BM datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/cd4017bm.pdf. The document is the primary reference for the 16-pin SOIC pin configuration, supply ratings, output behavior, timing characteristics, and operating limits. For board layout, use the manufacturer pin-description table and the package drawing rather than relying on an unverified third-party pinout image.
Where can I find the CD4017BM pinout?
The CD4017BM pinout is documented in the manufacturer datasheet and corresponds to its 16-pin SOIC package. Pin 1 is the clock input, pin 2 is clock inhibit, pin 3 is reset, pin 4 begins the decoded Q0 output, and pins 8 and 16 provide ground and supply connections. Use the pin-description table when assigning PCB nets and confirm all pin numbers against the selected package drawing.
Is there an SMD version of the CD4017BM?
The CD4017BM is already a surface-mount device supplied in a 16-pin SOIC package. A separate SMD adaptation is therefore unnecessary for this specific MPN. Search results mentioning “CD4017BM SMD” usually identify the same SOIC configuration, while CD4017-family parts in through-hole DIP packages are not footprint-compatible with CD4017BM without PCB changes.
What are the key specifications of CD4017BM that engineers should know?
The key CD4017BM specifications are ten decoded outputs, a 10 MHz typical operating frequency at 10 V peak-to-peak, positive-edge counting, a Schmitt-trigger clock input, and operation in a 16-pin SOIC package. The manufacturer also identifies fully static operation, standardized symmetrical outputs, 5 V, 10 V, and 15 V parametric ratings, and 100% quiescent-current testing at 20 V as important family-level characteristics.
What can replace the CD4017BM?
The CD4017BMG4 is a documented same-package replacement for the CD4017BM, with consistent terminals, package construction, performance parameters, and functional characteristics. It can replace the original without modifying the existing circuit. Other CD4017 variants should be selected only after checking the exact suffix, package, temperature grade, supply range, and timing limits against the manufacturer datasheet.
Is CD4017BM the same as CD4017BMG4?
CD4017BM and CD4017BMG4 are functionally equivalent 16-pin SOIC decade-counter variants from Texas Instruments. The documented comparison identifies consistent performance characteristics and terminals, allowing direct circuit replacement without PCB modification. The G4 suffix identifies a specific ordering or qualification variant, so engineers should still confirm procurement conditions, temperature range, and marking before production use.
When should I choose CD4017BM over a 74HC4017?
Choose the CD4017BM when a CD4000 CMOS decade counter with ten decoded outputs and a 16-pin SOIC footprint is appropriate for the design. A 74HC4017 may be attractive when the system specifically requires the 74HC logic family or its operating characteristics, but it must not be assumed to be pin-compatible without comparing clock inputs, reset behavior, supply limits, timing, and output states. The CD4017BMG4 is the closest documented drop-in alternative within the same family.
Is CD4017BM suitable for stepper-motor sequencing?
The CD4017BM is suitable for basic stepper-motor sequencing because its ten decoded outputs can activate successive phases in a defined order. The Schmitt-trigger clock input helps shape input transitions, and the clock-inhibit input allows the sequence to be held. The design must prevent accidental clocking, ensure reset returns a known phase, and include appropriate drive transistors because the counter outputs are not intended to drive motor windings directly.
How do the CD4017BM clock inhibit and reset inputs work?
Clock inhibit holds the counter sequence when asserted, while reset establishes the defined initial count state. According to the manufacturer description, the counter advances one count at the positive clock transition only when clock inhibit is low. Combining these controls allows a controller to pause, initialize, or restart a sequence, but their interaction and propagation delay should be checked in the manufacturer timing information.
Where can I buy CD4017BM online?
Use the “Request a Quote” form on this page to request CD4017BM availability, current lead time, and ordering information. The form connects the inquiry directly with XAIPART’s sales process and avoids presenting a stale temporary price. For engineering evaluation, confirm the exact 16-pin SOIC suffix, quantity, operating-temperature requirements, and delivery schedule before releasing a production order.
What is the current price of CD4017BM?
The current CD4017BM price is obtained through the “Request a Quote” form on this page rather than through a static product-page amount. The submitted request should identify the required quantity, package suffix, target shipment date, and any automotive or industrial qualification requirements. This allows the sales channel to confirm current component availability and the applicable commercial terms.
What is the lead time and stock status for CD4017BM?
Current stock status and lead time for CD4017BM should be confirmed through the “Request a Quote” form on this page. Include the required quantity, reel or tube format, acceptable date code policy, and target delivery date in the request. A distributor listing can indicate market availability, but it should not be treated as a guaranteed allocation for a production build.
Is CD4017BM still active?
The CD4017BM remains commercially listed for new procurement, and Texas Instruments continues to identify the device as a CMOS decade counter with a 16-pin SOIC package. Before a large rollout, confirm the lifecycle status and ordering information for the exact suffix with the manufacturer or through the quotation process. The product is also available in closely related CD4017B family variants that may be reviewed for sourcing continuity.
How should CD4017BM decoupling and PCB layout be handled?
Place the supply bypass capacitor close to the CD4017BM supply pin and route it with a short, low-inductance connection. Keep the clock and reset traces away from noisy switching nodes, provide a clean return path, and respect the package pin arrangement in the manufacturer drawing. Because decoded outputs can change after a clock edge, use timing margins and proper grounding when the outputs control sensitive or safety-related circuitry.

داده‌های مرجع مهندسی برای CD4017BM — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose CD4017BM for a new design that requires ten decoded sequential states in a 16-pin SOIC footprint, especially when the clock input benefits from Schmitt-trigger action. The 10 MHz typical operating frequency at 10 V peak-to-peak makes it suitable for both low-rate sequencing and substantially faster control functions. Select CD4017BMG4 when that documented same-package variant is preferable for procurement or exact ordering requirements. CD4017BE is another same-family SOIC option, but its temperature grade and ordering suffix should be checked against the system requirements before substitution. If the board already uses a 74HC-family counter, do not assume interchangeability without checking supply voltage, clock-input thresholds, reset behavior, timing, output drive, and every pin connection. For new layouts, use the exact SOIC footprint and verify decoupling, reset synchronization, and output-stage requirements in the manufacturer documentation.

مقایسه با جایگزین‌ها

پارامتر این محصول CD4017BMG4 CD4017BE
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-pin SOIC 16-pin SOIC - same 16-pin SOIC - same
Counter Type CMOS decade counter CMOS decade counter CMOS decade counter
Decoded Outputs 10 outputs 10 outputs 10 outputs
Typical Operating Frequency 10 MHz at 10 V peak-to-peak 10 MHz at 10 V peak-to-peak 10 MHz at 10 V peak-to-peak
Counting Edge Positive clock transition Positive clock transition Positive clock transition
Clock Input Schmitt-trigger action Schmitt-trigger action Schmitt-trigger action
Control Inputs Clock inhibit and reset Clock inhibit and reset Clock inhibit and reset
Parametric Rating Voltages 5 V, 10 V, and 15 V 5 V, 10 V, and 15 V 5 V, 10 V, and 15 V

تفاوت‌های کلیدی

  • Direct documented package-compatible replacement (در مقابلCD4017BMG4)
  • Ten individually decoded outputs (در مقابلCD4017BE)
  • Schmitt-trigger clock input supports controlled transitions (در مقابلCD4017BE)

یادداشت‌های طراحی

Connect the supply bypass capacitor directly to the VDD and VSS pins using short traces and a nearby ground return. The Schmitt-trigger clock improves transition handling but does not replace good signal conditioning. Keep the clock, inhibit, and reset nets away from switching-node copper, and use a solid ground plane so decoded output changes do not induce unintended clock edges.

Design clock and reset release timing around the propagation delay between an input transition and the corresponding decoded outputs. Reset and clock inhibit can be asynchronous control signals, so they should not be released close to a clock edge when a race could move the counter to an unintended state. Synchronizing externally generated reset commands or adding appropriate qualification logic improves repeatability.

Do not connect LEDs, relays, or stepper-motor windings directly to the counter outputs. Use transistor, MOSFET, or driver stages sized for the load and include the required flyback protection for inductive loads. Also avoid assuming that 10 MHz applies at every supply voltage: the published figure is typical at 10 V peak-to-peak, and timing must be verified at the circuit’s minimum operating voltage.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the exact CD4017BM ordering code. AEC-Q100 qualification is not indicated.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

cd4017bm datasheet cd4017bm pinout cd4017bm smd CD4017BM datasheet PDF CD4017BM SOIC pinout CD4017BM 10 MHz counter CD4017BM stepper motor sequencer CD4017BM LED sequencing CD4017BM vs CD4017BMG4 CD4017BM drop-in replacement CD4017BM equivalent CD4017BM price CD4017BM stock Texas Instruments CD4017BM

قطعات و اصطلاحات مرتبط

Texas Instruments CD4017BM CD4017BMG4 CD4017BE CMOS decade counter decade counter counter and divider CD4000B CMOS logic logic IC semiconductor Schmitt trigger clock inhibit reset input positive-edge counting 10 decoded outputs 16-pin SOIC SOIC package family surface-mount package stepper-motor sequencing LED sequencing industrial test sequence control digital state machine output propagation delay supply decoupling
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ