Harris Corporation

CD4024BFX - 7-Bit Binary Counter, 14-CDIP | Harris Corporation

MPN: CD4024BFX ✗ پایان تولید
14-CDIP Package Negative edge Speed
حداقل سفارش: 1 |

CD4024BFX نمای کلی

Harris Corporation CD4024BFX is a 7-bit CMOS ripple-carry binary counter IC with one counting element, negative-edge triggering, and a 14-pin ceramic dual in-line package. The device is identified as military-grade and through-hole mounted, positioning it for legacy systems that require a 14-terminal rectangular DIP counter. Its principal electrical characteristics include a 7-bit counting capacity, binary counter organization, and a 14-CDIP package.

A binary counter is a sequential digital-logic component that advances through a defined sequence of states when it receives an active clock transition. The CD4024BFX belongs to the CD4000 CMOS logic family, whose hierarchy is binary counter → counter IC → logic IC → digital semiconductor. Unlike a free-running oscillator, it advances only in response to its clock input, allowing a system to divide an incoming frequency into a lower binary-coded rate.

The CD4024BFX provides one 7-bit counting element, negative-edge triggering, and a ripple-carry architecture. These features make it suitable for frequency division, modulo operation, event counting, timing intervals, and digital state sequencing. Its 14-CDIP construction also supports insertion into legacy sockets and hand-wired or stitched PCB assemblies. The manufacturer datasheet should be consulted for detailed electrical limits, setup timing, reset behavior, and environmental ratings before production use.

Because this is a ripple-carry counter, propagation delay accumulates through the internal stages. The longest delay occurs between the first clocked stage and the final carry output. This characteristic makes the device most appropriate where one carry output is needed and moderately cascaded timing is acceptable, rather than for applications demanding simultaneous high-speed outputs from multiple counter sections.

Typical uses include binary frequency division in industrial control equipment, pulse counting in test and measurement systems, programmable timing chains in legacy computing equipment, and sequential address or state generation. The negative-edge clock trigger allows the counter to change state on the falling transition of the clock waveform, which can simplify edge-sensitive interfacing with surrounding CMOS logic.

PCB integration requires the 14-CDIP footprint and attention to signal-integrity practices, including short clock and reset traces, adequate bypass capacitance, and protection from unused inputs. Designers should also account for the cumulative ripple delay when cascading multiple counters or deriving timing from the terminal carry output.

This product record combines package identification, counter characteristics, drop-in replacement considerations, comparison data, and practical implementation guidance. It is intended to support engineering selection and sourcing decisions for legacy Harris CD4024BFX assemblies rather than substituting a modern surface-mount design without appropriate timing, environmental, and lifecycle review.

جایگزین‌های drop-in برای CD4024BFX — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای CD4024BFX (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Counter Type, Logic Family, Package Type.

Texas Instruments
Counter Type: 7-stage ripple-carry binary counter/divider
Logic Family: CD4000-series CMOS
Package Type: 14-pin PDIP
مقایسه با CD4024BFX →

CD4024BE

✅ جایگزین مستقیم
Texas Instruments
📦 14-CDIP
7-stage ripple-carry binary counter/divider · 7 stages · 7 bits · 3 V to 18 V · Negative-edge triggered · High-level reset · CD4000-series CMOS · -55 °C to +125 °C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

CD4024BP

✅ جایگزین مستقیم
📦 14-CDIP
Retains the same 7-bit counter resolution and 14-terminal DIP arrangement, a 0-bit resolution difference, while differing in package temperature grade.

📋 جایگزین مرجع (خارج از کاتالوگ)

HCF4024BEY

✅ جایگزین مستقیم
📦 14-CDIP
Provides the same 7-bit binary-counter function with a 0-bit resolution difference; its stated -55°C to 125°C range broadens the alternative operating grade relative to the target's military designation.

📋 جایگزین مرجع (خارج از کاتالوگ)

JM38510/05655BCA

✅ جایگزین مستقیم
📦 14-CDIP
Implements the same 7-bit binary-counter resolution with a 0-bit resolution difference in a 14-terminal DIP package; qualification and screening differences must be checked against the original assembly.

📋 جایگزین مرجع (خارج از کاتالوگ)

CD4024BHSR

✅ جایگزین مستقیم
Renesas Electronics
📦 14-CDIP
Binary Ripple Counter · 7 bit · 1 · 12 MHz · Negative Edge · Asynchronous · 3 V to 18 V · -55C to +125C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

CD4024BFX حداکثر مقادیر مجاز و مشخصات الکتریکی

Counter Type Binary counter
Number of Counting Elements 1 element
Counter Resolution 7 bit
Clock Edge Negative edge
Logic Family CMOS CD4000 series
Architecture Ripple-carry binary counter
Package Type 14-CDIP
Number of Terminals 14 terminals
سبک نصب Through-hole
Package Shape Rectangular DIP
Temperature Grade Military

راهنمای پیکربندی پین CD4024BFX rectangular dip

پیکربندی پین برای CD4024BFX (پکیج rectangular dip). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج rectangular dip برای CD4024BFX

داده پین‌آوت تفصیلی موجود نیست برای CD4024BFX.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

CD4024BFX مناسب است برای 6 کاربردs: Industrial Frequency Divider, Pulse and Event Counter, Legacy Timing Chain, Digital State Sequencer, Test and Measurement Equipment, Aerospace and Defense Retrofit.

🏭

Industrial Frequency Divider

The CD4024BFX suits legacy industrial timing circuits that divide a clock into a lower binary-coded frequency. Its 7-bit counter provides 128 states, while the negative-edge trigger establishes a deterministic state transition. The 14-CDIP package also allows reuse of an existing through-hole controller board. The principal design consideration is ripple delay: timing from the first output to the terminal carry accumulates across the internal stages. Confirm maximum clock frequency and output transition limits in the manufacturer datasheet, and route the clock away from sensitive analog sections.

🔧

Pulse and Event Counter

CD4024BFX can count incoming pulses in legacy instrumentation when a system requires binary event totals rather than a display-oriented counter IC. The single 7-bit counting element produces a modulo-128 count, and the negative-edge clock trigger can be aligned with a pulse source. Engineers should verify the allowable input pulse width and setup time before using it directly with slow or noisy mechanical contacts. Debouncing, conditioning, and clock-schmitt design remain external concerns because the CD4024BFX does not eliminate input-contact bounce.

⏱️

Legacy Timing Chain

The CD4024BFX is appropriate for programmable timing and delayed-event circuits built around older CMOS control logic. Its 7-bit count permits binary tap selection, while the 14-CDIP package simplifies replacement in through-hole equipment. Designers should not assume that the terminal carry arrives simultaneously with lower-order outputs because the ripple architecture introduces cumulative propagation delay. Use the manufacturer timing characteristics to establish setup and hold margins, and avoid using a near-terminal carry as an edge-sensitive clock without sufficient margin.

🖥️

Digital State Sequencer

CD4024BFX can serve as the modulo-128 element in a legacy digital sequencer that advances through binary states after each active clock edge. The counter outputs provide a compact state vector for combinational decoding, while the negative-edge transition gives designers a defined update point. Because only one counting element is present, cascaded devices are required for wider state spaces. The design must include analysis of cumulative ripple delay and must use the datasheet pin-description table to avoid assigning reserved or duplicated outputs incorrectly.

📟

Test and Measurement Equipment

The CD4024BFX can support frequency division and event-counting functions in legacy test and measurement equipment that uses through-hole CMOS logic. A 7-bit counter divides a periodic input into a lower-rate binary sequence, which may feed display, trigger, or control logic. Keep the clock path short and isolate the counter from high-impedance analog nodes to reduce coupling. The military-grade target is relevant when the original equipment specifies a qualified counter for extended environmental operation, while lower-grade alternatives require a separate operating-temperature review.

✈️

Aerospace and Defense Retrofit

CD4024BFX is suited to maintaining legacy aerospace, defense, or other high-reliability through-hole systems whose original schematics call for a military-grade CD4000-series counter. The 14-CDIP format allows socketed implementation, and the 7-bit counter architecture preserves legacy binary-count behavior. Substitution should be treated as a controlled qualification exercise: compare operating-temperature grade, timing, radiation or screening expectations, and provenance requirements. Because the binary-counter function matches, the decisive engineering issue is qualification rather than state resolution.

خلاصه محصولات پیشنهادی

CD4024BE Texas Instruments استفاده‌شده در: Industrial Frequency Divider, Legacy Timing Chain, Test and Measurement Equipment HCF4024BEY Extended-temperature 14-DIP counter alternative استفاده‌شده در: Industrial Frequency Divider, Digital State Sequencer, Aerospace and Defense Retrofit CD4024BP 14-DIP binary-counter alternative استفاده‌شده در: Pulse and Event Counter, Digital State Sequencer CD4024B Same-family binary-counter alternative استفاده‌شده در: Pulse and Event Counter, Test and Measurement Equipment JM38510/05655BCA Qualified DIP counter alternative استفاده‌شده در: Legacy Timing Chain, Aerospace and Defense Retrofit
What is the CD4024BFX?
The CD4024BFX is a Harris Corporation 7-bit CMOS ripple-carry binary counter IC with one counting element, negative-edge triggering, and a 14-pin ceramic DIP package. According to the CD4024BFX product datasheet, it is designed for binary counting and frequency-divider functions in through-hole military-grade equipment.
How many bits can the CD4024BFX count?
The CD4024BFX counts in 7-bit binary, allowing 128 coded states before overflow. According to the CD4024BFX manufacturer datasheet, the device contains one counting element and uses a negative-edge-triggered clock. The exact output timing and reset behavior should be taken from the datasheet timing tables.
What package does the CD4024BFX use?
The CD4024BFX uses a 14-CDIP package with through-hole mounting and 14 terminals. According to the CD4024BFX product datasheet, the package is rectangular and intended for insertion into a compatible dual in-line socket or through-hole PCB footprint.
Where can I download the CD4024BFX datasheet PDF?
The CD4024BFX datasheet and technical-information page is available at the manufacturer-linked source URL shown on this product page. According to that datasheet, the device is a 7-bit binary counter with one element, negative-edge triggering, and a 14-CDIP package. Verify the electrical limits and pin description before schematic release.
Where can I find the CD4024BFX pinout?
The CD4024BFX pinout is defined in the pin-description table of the manufacturer datasheet. According to the CD4024BFX product documentation, the device has 14 terminals in a ceramic DIP package. Use that table when assigning clock, reset, counter outputs, and supply pins in the PCB schematic.
Is the CD4024BFX a ripple-carry counter?
Yes, the CD4024BFX is a CMOS ripple-carry binary counter. According to the CD4024BFX manufacturer datasheet, its internal counter stages operate as a ripple chain, so transition delay accumulates toward the terminal carry output. Account for this cumulative delay when cascaded timing must meet a narrow hold window.
What clock edge triggers the CD4024BFX?
The CD4024BFX advances on the negative edge of its clock input. According to the CD4024BFX manufacturer datasheet, the part is identified as a negative-edge-triggered binary counter. This behavior should be considered when designing clock-crossing circuits or circuits in which another device changes state on the same falling transition.
Where can I buy CD4024BFX?
Use the Request a Quote form on this page to request CD4024BFX availability, current pricing, and lead time. The part is a legacy 14-CDIP military-grade Harris device, so package condition and sourcing traceability may be important. The form connects the request directly with the XAIPART supply team.
What is the price of CD4024BFX?
Current CD4024BFX pricing depends on package condition, quantity, and supply status and is not fixed on this page. Use the Request a Quote form on this page for the applicable unit and volume pricing. Because CD4024BFX is a legacy military-grade CD4000-series device, request lot-level traceability and inspection details with the quotation.
What is the lead time for CD4024BFX?
The current CD4024BFX lead time should be requested through the Request a Quote form on this page. Lead time can depend on available inventory, test traceability, and whether new or previously manufactured ceramic-DIP parts are required. Provide the target quantity and acceptable provenance when submitting the request.
Is CD4024BFX in stock?
Stock status for CD4024BFX should be confirmed through the Request a Quote form on this page. The part is a legacy military-grade 14-CDIP counter, and availability may vary with condition, packaging, and lot requirements. Submit the required quantity and inspection criteria for an availability response.
What is the best drop-in replacement for CD4024BFX?
The closest documented replacement candidates are the DIP-14 CD4024B family devices, including CD4024BE, CD4024BP, HCF4024BEY, and JM38510/05655BCA, but each must be checked for operating-temperature grade, timing, and environmental requirements. According to the CD4024 cross-reference information, these devices implement the same 7-bit binary-counter function.
Can HCF4024BEY replace CD4024BFX?
HCF4024BEY is a documented 7-bit binary-counter equivalent in the 14-terminal DIP class, and its published operating-temperature limits are -55°C to 125°C. According to the CD4024 comparison and cross-reference information, it is electrically positioned as an alternative, but input thresholds, timing, and grade requirements should be reviewed before substitution.
CD4024BFX versus CD4024BE: which is better for legacy systems?
CD4024BFX is identified as military-grade, while CD4024BE is the plastic commercial-grade member of the same 7-bit counter family. Both use a 14-terminal DIP arrangement according to the manufacturer and cross-reference information. CD4024BFX is preferable when the original equipment requires military temperature qualification; otherwise, CD4024BE may fit lower-temperature requirements.
When should I choose CD4024BFX instead of CD4024BE?
Choose CD4024BFX when a legacy design specifies a military-grade 7-bit counter and requires the CD4024B ceramic-DIP qualification class. CD4024BE is the commercial-temperature counterpart and may be appropriate for ordinary indoor equipment. According to the CD4024BFX datasheet and comparison information, both retain the same 7-bit counting resolution.
Is CD4024BFX suitable for frequency division?
Yes, CD4024BFX is suitable for frequency division when the accumulated ripple delay remains acceptable for the system timing budget. According to the CD4024BFX manufacturer datasheet, the device is a 7-bit binary ripple-carry counter. Divide by 128 through the terminal outputs while accounting for the delay from the first output to the final carry.

داده‌های مرجع مهندسی برای CD4024BFX — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose CD4024BFX when maintaining a legacy system that specifically calls for a military-grade Harris 14-CDIP counter, especially when provenance, qualification, or environmental requirements rule out commercial-grade devices. Its 7-bit resolution and negative-edge ripple-counter architecture make it suitable for frequency division, pulse counting, and modular timing. CD4024BE or CD4024BP may be practical for indoor commercial equipment because they retain the same counter resolution and DIP footprint, but their lower temperature grade is the key tradeoff. HCF4024BEY is worth considering when a documented -55°C to 125°C operating range is beneficial and its electrical timing is acceptable. JM38510/05655BCA is more appropriate when screened or qualified sourcing is required. In every case, verify the pinout, supply range, timing limits, and qualification requirements before approving a substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول CD4024BE CD4024BP HCF4024BEY JM38510/05655BCA CD4024B
Package 14-CDIP 14-CDIP 14-CDIP 14-DIP 14-DIP 14-CDIP
Brand Harris Corporation Texas Instruments Texas Instruments STMicroelectronics Microchip Technology Texas Instruments
Counter Resolution 7 bit 7 bit 7 bit 7 bit 7 bit 7 bit
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

تفاوت‌های کلیدی

  • Military-grade CD4024B qualification (در مقابلCD4024BE)
  • Wide stated operating range in an equivalent DIP device (در مقابلHCF4024BEY)
  • Exact binary-counter architecture preserved (در مقابلJM38510/05655BCA)
  • Socket-compatible 14-terminal ceramic DIP construction (در مقابلCD4024BP)

یادداشت‌های طراحی

Do not treat the CD4024BFX as a synchronous counter. The lower-order outputs change before the terminal carry because propagation delay accumulates through the ripple chain. Use the manufacturer timing characteristics to establish the interval between the first output transition and the final carry. If another device samples the carry on the same clock edge, add sufficient delay or redesign the timing chain so the sampling edge occurs after the worst-case ripple delay.

Preserve a conventional 14-pin DIP land pattern with 300 mil row spacing and 100 mil pitch. Keep the clock route short, connect the supply pins to a low-impedance plane, and place the required bypass capacitor close to the device. When upgrading a legacy board, inspect socket tension, pin oxidation, solder bridging, and lead-frame alignment; these mechanical conditions can matter more than the nominal logic function in a long-lived assembly.

Do not switch the CD4024BFX clock directly from a noisy mechanical contact or a slow-changing analog node. Use a conditioned clock with adequate rise and fall times and ensure that reset inputs cannot float. Review every input for voltage levels compatible with the CD4000-series supply range. For cascaded counters, route the terminal carry to the next clock with enough trace isolation to prevent simultaneous switching noise from disturbing the source device.

CD4024BFX is a low-power logic counter rather than a power-conversion component, but environmental qualification still governs its use. The target is identified as military-grade, while the suitable operating-temperature range is not stated in the available product listing. Verify the datasheet limits and system ambient temperature before installation. If a substitute offers a wider stated range, confirm that its input thresholds, timing, and supply limits remain compatible with the original circuit.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The available product information identifies the CD4024BFX as a military-grade Harris Corporation CMOS counter but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the part is not identified as an automotive-qualified device.

جستجوهای مرتبط

CD4024BFX datasheet CD4024BFX specifications CD4024BFX pinout CD4024BFX datasheet pdf CD4024BFX equivalent CD4024BFX replacement CD4024BFX cross reference CD4024BFX vs CD4024BE CD4024BFX price CD4024BFX stock Harris Corporation CD4024BFX CD4024 14-CDIP binary counter CD4024 7-bit frequency divider CD4024BFX schematic

قطعات و اصطلاحات مرتبط

Harris Corporation CD4024BFX CD4024BE CD4024BP HCF4024BEY JM38510/05655BCA CD4024B binary counter ripple-carry counter counter IC logic IC digital semiconductor CMOS CD4000 series negative-edge trigger 7-bit counter frequency divider pulse counting 14-CDIP DIP package family through-hole technology military-grade component power supply decoupling ripple propagation delay
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ