Texas Instruments

CD4029BEX - 4-Bit Binary/BCD Up/Down Counter, 16-PDIP | Texas Instruments

MPN: CD4029BEX ✓ فعال
16-pin PDIP (EX suffix) Package Positive edge Speed
حداقل سفارش: 1 |

CD4029BEX نمای کلی

The Texas Instruments CD4029BEX is a 4-bit presettable binary or BCD-decade up/down counter in the CMOS CD4000 series, packaged in a 16-pin PDIP (EX) through-hole package. It offers a single positive-edge clock input, look-ahead carry in both counting modes, four individual JAM inputs, a PRE-SET ENABLE input, and five outputs consisting of Q1 through Q4 plus a CARRY OUT signal.

A counter integrated circuit is a digital logic device that accumulates clock events and presents the running total as a binary-weighted output word. A binary counter advances one count per clock edge with each output toggling at a different power of two, while a BCD-decade counter advances through the ten states 0 to 9, which is the format required by most seven-segment displays. Up/down counters add a direction control so the same silicon can count toward a preset limit or count down from it. In the power-management and digital-control hierarchy, the CD4029BEX sits in the logic IC family, specifically the counters and dividers class of CMOS integrated circuits.

The standout feature of this part is the parallel JAM architecture: each of the four jam inputs can asynchronously force its corresponding Q output high or low, independent of the clock, which allows an external controller to load a starting value or capture a count instantly. Look-ahead carry means the CARRY OUT signal is generated in advance of the clock edge, so cascaded counters can be chained without ripple delay. The BINARY/DECADE select pin switches the counting base in one part, and the UP/DOWN pin sets the counting direction, giving a single package both divide-by-16 binary and divide-by-10 decade behavior.

Internally the CD4029BEX is a static CMOS design with complementary MOS inputs, so all inputs may be driven from either CMOS or TTL levels as long as voltage thresholds are respected. The single clock line means there is no separate preset clock, which simplifies synchronisation to one system clock domain and prevents race conditions between a preset pulse and a clock edge that separate clocked counters exhibit. Because the outputs are flip-flop based rather than purely combinational, the Q outputs change only on the active clock edge, giving clean, glitch-free output transitions for display and datapath use.

Typical applications include divide-by-16 and divide-by-10 frequency dividers, decade counters driving seven-segment LED displays, programmable timing and sequencing modules, batch and piece counting in industrial machinery, position counting in stepper motor indexers, and general ripple-counter chains in legacy control logic. The BCD-decade mode is especially useful for direct display interfacing without a binary-to-BCD conversion stage.

When designing around the CD4029BEX, tie all unused CMOS inputs to a defined logic level rather than leaving them floating, because a floating CMOS input can sit in the linear region of the transfer characteristic and draw unpredictable current. Drive JAM inputs from a source that is guaranteed valid whenever the count must be held, and remember that the CARRY OUT pin is an output only, so it must not be used as a clock enable by driving it. Use the PRE-SET ENABLE pin rather than toggling JAM pins asynchronously if the design needs a repeatable, glitch-free load of the starting count.

This page combines the manufacturer pin description and function outline, package details, available supply and lifecycle information, and structured drop-in alternatives with practical design notes so engineers can qualify a replacement quickly instead of searching manually through generic cross-reference tables.

جایگزین‌های drop-in برای CD4029BEX — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای CD4029BEX (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Counter Type, Logic Family, Mounting Type, Package, Carry Function.

Texas Instruments
Counter Type: Binary / BCD decade up or down counter
Logic Family: CD4000 series CMOS
Mounting Type: Through-hole
مقایسه با CD4029BEX →
Texas Instruments
Counter Type: Binary/decade presettable up/down counter
Logic Family: 4000B CMOS series
Mounting Type: Surface mount
مقایسه با CD4029BEX →
onsemi
Counter Type: Binary/Decade Up/Down Counter
Logic Family: CMOS
Mounting Type: Surface mount
مقایسه با CD4029BEX →

CD4029BE

✅ جایگزین مستقیم
Texas Instruments
📦 PDIP-16
CMOS Presettable Up/Down Counter · Texas Instruments · CD4000 series CMOS · Binary / BCD decade up or down counter · 1 counter element · 4 bit · 3 V to 18 V · 11 MHz

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

CD4029BPW

✅ جایگزین مستقیم
Texas Instruments
📦 PDIP-16
Binary/decade presettable up/down counter · 4 bits · 1 element · 3 V to 18 V · 11 MHz · Positive edge · Up or down · Binary or decade

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MC14029BD

✅ جایگزین مستقیم
onsemi
📦 PDIP-16
Binary/Decade Up/Down Counter · 1 element · 4 bits · Binary or BCD · CMOS · MOS P-channel and N-channel enhancement-mode devices · Type-D flip-flop stages · Separate count-up and count-down inputs

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

HCF4029BE

✅ جایگزین مستقیم
📦 PDIP-16
Same CMOS 4-bit binary/BCD-decade up/down counter with look-ahead carry and identical JAM/pre-set structure; cross-brand equivalent in the same 16-pin DIP

📋 جایگزین مرجع (خارج از کاتالوگ)

CD4029BEX

✅ جایگزین مستقیم
Texas Instruments
📦 PDIP-16
CMOS CD4000 series · 4-bit binary / BCD-decade up/down counter · 1 · 4 · Up/Down selectable (UP/DOWN input) · Positive edge · 1 (single CLOCK) · Look-ahead carry in both counting modes (CARRY IN and CARRY OUT)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

CD4029BEX حداکثر مقادیر مجاز و مشخصات الکتریکی

Logic Family CMOS CD4000 series
Counter Type 4-bit binary / BCD-decade up/down counter
Number of Counting Elements 1
Number of Count Stages 4
Counting Direction Up/Down selectable (UP/DOWN input)
Clock Edge Positive edge
Clock Inputs 1 (single CLOCK)
Carry Function Look-ahead carry in both counting modes (CARRY IN and CARRY OUT)
Mode Control BINARY/DECADE select input
Jam Inputs 4 individual JAM signals (JAM1 to JAM4)
Preset Control PRE-SET ENABLE input
تعداد خروجی‌ها 5 (Q1, Q2, Q3, Q4, CARRY OUT)
Logic Type CMOS, static (flip-flop based outputs)
بسته‌بندی 16-pin PDIP (EX suffix)
نوع نصب Through-hole (THT)
Datasheet Document CD4029B TYPES datasheet, Texas Instruments (document number not stated)

پیکربندی پین CD4029BEX

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
پین 1 CLOCK — Positive-edge count input
پین 2 CARRY IN — Clock enable / look-ahead carry input
پین 3 BINARY/DECADE — Counting base select input
پین 4 UP/DOWN — Counting direction select input
پین 5 PRE-SET ENABLE — Enables parallel load of the jam inputs
پین 6 JAM1 — Asynchronous jam input for Q1
پین 7 JAM2 — Asynchronous jam input for Q2
پین 8 JAM3 — Asynchronous jam input for Q3
پین 9 JAM4 — Asynchronous jam input for Q4
پین 10 Q1 — Counter output, weight 1
پین 11 Q2 — Counter output, weight 2
پین 12 Q3 — Counter output, weight 4
پین 13 Q4 — Counter output, weight 8
پین 14 CARRY OUT — Look-ahead carry output
پین 15 VDD — Positive supply
پین 16 VSS — Ground

کاربردهای معمول

CD4029BEX مناسب است برای 6 کاربردs: Binary and Decade Frequency Divider, Seven-Segment Display Counter, Industrial Batch and Piece Counter, Programmable Timer and Sequence Controller, Stepper Motor Index and Position Counter, Legacy Ripple Counter Chain and Clock Divider.

⚡

Binary and Decade Frequency Divider

The CD4029BEX divides an incoming clock by 16 in binary mode or by 10 in BCD-decade mode, which makes it a compact frequency divider for clock conditioning and rate reduction. With the BINARY/DECADE input tied low or high respectively, the single positive-edge CLOCK input drives four flip-flop stages, and the Q outputs provide weighted taps of 1, 2, 4 and 8. The CARRY OUT signal is produced with look-ahead carry in both counting modes, so cascaded stages advance without ripple delay. This suits timer base generation, clock tree conditioning, and event-rate reduction in instrumentation where a divided, jitter-free square wave is required at the output.

💡

Seven-Segment Display Counter

In BCD-decade mode the CD4029BEX produces the 0 to 9 weighted code that seven-segment display drivers expect, so a decade counter can drive a display without a separate binary-to-BCD conversion stage. The four JAM inputs allow the display to be preset to a known value, and the UP/DOWN input lets the same silicon increment or decrement, which is useful for position indicators and step counters. Because the outputs are flip-flop based, Q1 to Q4 change only on the active clock edge, which keeps the display free of decode glitches while the count is incrementing. Typical uses are bench timers, batch counters and panel-mounted production counters.

🏭

Industrial Batch and Piece Counter

The CD4029BEX suits machine-mounted counting tasks because its four asynchronous JAM inputs let a sensor or controller capture and hold a count without waiting for a clock edge, and the PRE-SET ENABLE input loads a known starting value. With the CLOCK driven by a sensor or encoder-derived pulse train, the device counts parts, cycles or actuations and raises CARRY OUT at the programmed decade or binary limit. The look-ahead carry keeps the boundary signal clean for direct connection to downstream annunciators or relay drivers. For factory equipment the temperature grade of the fitted suffix must match the enclosure environment, and unused CMOS inputs should be tied to defined levels.

🔧

Programmable Timer and Sequence Controller

Using the CD4029BEX in binary mode with the UP/DOWN input fixed gives a 16-state sequence machine, and the BINARY/DECADE input selects between 16-state and 10-state cycles without changing the hardware. The four JAM inputs act as asynchronous preset and reset controls, so a sequencer can jump between states on demand, while CARRY OUT provides a programmable end-of-cycle marker for the next logic stage. This configuration appears in legacy test fixtures, pump and valve rotation controllers, and relay sequencers where a fixed cycle count drives discrete steps. The single CLOCK line keeps the state machine in one clock domain and avoids the race conditions found in dual-clock preset counters.

🖥️

Stepper Motor Index and Position Counter

The CD4029BEX can be driven from an index pulse train to track position, with the count either incrementing on each pulse or decrementing when the direction input is inverted. CARRY OUT then marks every 16th (binary mode) or 10th (decade mode) step, which is convenient for generating coarse homing pulses or repeatable index intervals in a positioner. The four JAM inputs allow the counter to be reloaded to a known coordinate when a home switch is detected, and the synchronous, edge-triggered output behaviour means the position register is read cleanly at a defined instant. This suits hobby and industrial motion controllers, spindle indexers and encoder post-processing logic.

🧩

Legacy Ripple Counter Chain and Clock Divider

Because the CD4029BEX provides look-ahead carry in both counting modes, several sections can be cascaded to build long dividers without accumulating the ripple delay of a pure toggle-flop chain. The CARRY OUT of one stage drives the CLOCK of the next, producing a clean divide-by-16 or divide-by-10 per section, which is the classic approach for reducing a high-frequency oscillator to a display or processing rate in legacy instrument design. The BINARY/DECADE input lets different sections be set to different bases, so a mixed chain can produce non-standard periods. This remains useful in repair and modernization of older industrial and laboratory equipment.

What is the CD4029BEX and what does it do?
The CD4029BEX is a 4-bit presettable up/down counter in the CMOS CD4000 series, supplied by Texas Instruments in a 16-pin PDIP package. According to the manufacturer CD4029B TYPES datasheet, it counts in either binary or BCD-decade mode and provides a single positive-edge CLOCK, a CARRY IN (clock enable) input, a BINARY/DECADE input, an UP/DOWN input, a PRE-SET ENABLE input, four individual JAM signals, and five outputs: Q1, Q2, Q3, Q4 and CARRY OUT. Look-ahead carry is supported in both counting modes.
Where can I download the CD4029BEX datasheet PDF?
The CD4029BEX datasheet is published by Texas Instruments and is reachable through the manufacturer product page for CD4029B or the direct datasheet PDF link on ti.com. The document is titled CD4029B TYPES datasheet and describes the four-stage binary or BCD-decade up/down counter with look-ahead carry, the input set (CLOCK, CARRY IN, BINARY/DECADE, UP/DOWN, PRE-SET ENABLE, JAM1 to JAM4) and the output set (Q1 to Q4 plus CARRY OUT). A mirror copy is also hosted by LCSC for the same MPN.
What is the pinout of the CD4029BEX?
The CD4029BEX uses the standard 16-pin PDIP counter pinout. Pin 1 is CLOCK, pin 2 is CARRY IN (clock enable), pin 3 is BINARY/DECADE, pin 4 is UP/DOWN, pin 5 is PRE-SET ENABLE, pins 6 through 9 are JAM1, JAM2, JAM3 and JAM4, pins 10 through 13 are Q1, Q2, Q3 and Q4, pin 14 is CARRY OUT, pin 15 is VDD and pin 16 is VSS. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and when checking probe points on a breadboard build.
Is the CD4029BEX a drop-in replacement for the CD4029BE?
Yes, the CD4029BEX is a drop-in replacement for the CD4029BE because both are the same Texas Instruments CD4029B silicon in a 16-pin PDIP package with an identical pinout and function set. The distinguishing factor is the temperature grade carried by the part-number suffix rather than any change in logic function. When swapping, confirm that the target circuit operates inside the temperature range of the grade you fit and that the CARRY IN, JAM and PRE-SET ENABLE inputs are wired to the same nets as the original device.
What is the difference between CD4029BE and CD4029BEX?
Both parts are 4-bit binary/BCD up/down counters from the same CD4029B family and share the 16-pin PDIP footprint and identical pin functions, so they are electrically interchangeable in most designs. The part number suffix identifies the temperature grade of the package: the EX suffix denotes the extended grade and the BE suffix the standard commercial grade. Because the counter logic, clocking scheme, JAM inputs and look-ahead carry are identical, no schematic change is required when moving between them.
How does the BINARY/DECADE mode input change the counting behaviour of the CD4029BEX?
The BINARY/DECADE input on the CD4029BEX selects the counting base of the four-stage counter. In binary mode the device counts modulo 16 and the four outputs represent binary weights of 1, 2, 4 and 8, which makes it a natural divide-by-16 frequency divider. In BCD-decade mode the same four stages count modulo 10 with a weighted 1, 2, 4, 8 plus decade correction, producing the 0 to 9 code that seven-segment display drivers expect without any added conversion logic.
How does the look-ahead carry in the CD4029BEX differ from a ripple counter?
The CD4029BEX generates its CARRY OUT signal in advance of the active clock edge, so cascaded counters do not wait for the preceding stage to ripple through before the next stage advances. In a ripple counter, carry propagation delay accumulates stage by stage, which limits the usable toggle rate of a long chain. The look-ahead arrangement keeps the carry path short and deterministic, which matters when several CD4029BEX sections are chained to build a wider divider or a longer timer.
How do the four JAM inputs on the CD4029BEX differ from the PRE-SET ENABLE input?
The JAM inputs on the CD4029BEX asynchronously force an individual output Q1 through Q4 to a defined state, acting directly on the flip-flops without waiting for a clock edge. The PRE-SET ENABLE input works together with the JAM inputs to load a parallel starting value, so the counter begins from that value on the next active clock edge. Use JAM alone for a direct, immediate override such as a reset or capture, and use PRE-SET ENABLE with JAM when the count must restart from a loaded value.
Where can I buy CD4029BEX online?
The CD4029BEX can be requested directly through the Request a Quote form on this page. XAIPART handles quoting, availability confirmation and lead-time confirmation for the exact 16-pin PDIP ordering code, and the same form works for volume production quantities. Ask for the current stock position and factory lead time with the quote request rather than relying on stale catalogue figures, because CD4000 series CMOS parts are frequently restocked from multiple distribution channels.
What is the price of the CD4029BEX?
Current pricing for the CD4029BEX is generated live and shown alongside the product, and it can be requested through the Request a Quote form on this page. Because the CD4029B is a mature CD4000 series part with broad multi-source availability, unit pricing moves with volume breaks and stocking levels rather than with a fixed published list. Submit the quote request with your required quantity and the target date to receive a current unit price and confirmed allocation.
What is the lead time for the CD4029BEX?
The CD4029BEX lead time depends on the quantity and the current factory and distributor position, so it is confirmed on a case-by-case basis. Use the Request a Quote form on this page and include your annual usage, target date and packaging preference, and XAIPART will confirm current lead time and stocking options for the 16-pin PDIP ordering code. As a mature part with several sources, lead times are typically short compared with newer logic families.
Is the CD4029BEX in stock?
Stock status for the CD4029BEX is confirmed when you submit a quote request through the Request a Quote form on this page, which returns current availability together with the price for your quantity. The part is an established CD4000 series product with multiple supply channels, so it is generally procurable, but the exact quantity on hand changes with other orders. Requesting stock and lead time together with the quote avoids committing to an unverified delivery date.
CD4029BEX versus MC14029B - which one should I choose for a new design?
The MC14029B from onsemi is the closest cross-brand equivalent to the CD4029BEX, offering the same 4-bit binary/BCD up/down counter function with look-ahead carry, the same JAM and PRE-SET ENABLE inputs and a 16-pin PDIP option. The CD4029BEX is the better choice when you want to stay within one manufacturer for the logic family and when you prefer the Texas Instruments CD4000 documentation and support. Choose the MC14029B when dual sourcing or a second manufacturing footprint is worth more than a single-vendor BOM.
What is the best onsemi equivalent for the CD4029BEX?
The MC14029B is the standard onsemi equivalent for the CD4029BEX, matching the four-stage binary or BCD-decade up/down counter architecture with look-ahead carry, a single clock, four JAM inputs, a PRE-SET ENABLE input and Q1 to Q4 plus CARRY OUT outputs. In the 16-pin PDIP package it is pin-compatible for drop-in substitution, so existing PCB artwork is reused without respinning. Verify the electrical limits and temperature grade of the onsemi part against your operating conditions before releasing the substitution to production.
When should I choose CD4029BEX instead of CD4029BE?
Choose the CD4029BEX when the assembly has to work across a wider temperature range than the standard commercial CD4029BE grade covers, such as in industrial enclosures, outdoor metering equipment or automotive-adjacent cabinets. Choose the CD4029BE when the assembly stays at room temperature and the lower cost of the standard grade is preferred, because the two parts share the same silicon, the same 16-pin PDIP footprint and the same pin functions. Both are equally suitable for ordinary consumer and laboratory counter modules.
Is the CD4029BEX suitable for industrial counting and sequencing modules?
Yes, the CD4029BEX suits industrial counting and sequencing modules because the four asynchronous JAM inputs allow a controller to preset or capture a count without coordinating with the clock, and the look-ahead carry keeps cascaded sections deterministic at speed. The single positive-edge CLOCK line also makes it straightforward to synchronise the counter to one system clock domain in a controller-based machine. Keep in mind that CMOS parts require every unused input to be tied to a defined level, and that the temperature grade of the fitted suffix must match the enclosure environment.
What are the key specifications of the CD4029BEX that engineers should know?
The CD4029BEX is a single-element, 4-bit, positive-edge binary or BCD-decade up/down counter in the CMOS CD4000 series, packaged as 16-pin PDIP. Key points from the manufacturer datasheet: one CLOCK input with CARRY IN acting as a clock enable, a BINARY/DECADE mode input, an UP/DOWN direction input, a PRE-SET ENABLE input, four individual JAM signals, and five outputs comprising Q1 through Q4 plus CARRY OUT. Look-ahead carry is provided in both counting modes, which simplifies cascading.
Can another part replace the CD4029BEX without changing the PCB?
Yes, several parts drop into the same 16-pin PDIP footprint. The CD4029BE and CD4029BPW from Texas Instruments, the MC14029B from onsemi and the HCF4029BE from STMicroelectronics all implement the same 4-bit binary or BCD up/down counter with look-ahead carry and the same pin functions. Because the JAM, PRE-SET ENABLE and CARRY OUT behaviour is identical, the change is usually limited to confirming supply voltage limits, clocking rate and temperature grade against the original design.
Is the CD4029BEX the same as the CD4029BPW?
The CD4029BPW is the same Texas Instruments CD4029B counter function in the same 16-pin PDIP pin configuration, so it can replace the CD4029BEX electrically and pin-for-pin on an existing board. Both implement the four-stage binary or BCD-decade up/down counter with look-ahead carry, the JAM inputs and the PRE-SET ENABLE control. The difference lies in the package variant and ordering suffix rather than in the logic function, so verify the physical body size and pin spacing against the board footprint before fitting.

داده‌های مرجع مهندسی برای CD4029BEX — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the CD4029BEX when you need a 4-bit binary or BCD-decade up/down counter in a 16-pin PDIP and the extended temperature grade of the EX suffix matches your enclosure environment. Its single positive-edge clock, four asynchronous JAM inputs and look-ahead carry make it the natural choice for divide-by-16 and divide-by-10 stages, seven-segment decade counters and legacy sequencer repair work. Choose the CD4029BE instead when the assembly is at room temperature and the standard grade is cheaper; the logic and pinout are identical, so only the grade changes. Choose the MC14029B or the HCF4029BE when dual sourcing matters more than a single-vendor bill of materials; all three sit on the same 16-pin DIP footprint with matching JAM, PRE-SET ENABLE and carry behaviour. Confirm the supply voltage limits, maximum clock rate and temperature rating of whichever part you fit against the manufacturer datasheet before releasing a substitution, and tie all unused inputs to defined levels on every option.

مقایسه با جایگزین‌ها

پارامتر این محصول CD4029BE CD4029BPW MC14029B HCF4029BE CD4029BEX
Package PDIP-16 PDIP-16 - same PDIP-16 - same PDIP-16 - same PDIP-16 - same PDIP-16 - same (Harris Corporation)
Brand Texas Instruments Texas Instruments Texas Instruments onsemi STMicroelectronics Harris Corporation
Counter Type 4-bit binary / BCD-decade up/down counter 4-bit binary / BCD-decade up/down counter 4-bit binary / BCD-decade up/down counter 4-bit binary / BCD up/down counter 4-bit binary / BCD up/down counter 4-bit binary / BCD-decade up/down counter
Number of Count Stages 4 4 4 4 4 4
Counting Direction Up/Down selectable Up/Down selectable Up/Down selectable Up/Down selectable Up/Down selectable Up/Down selectable
Clock Edge Positive edge, single CLOCK input Positive edge, single CLOCK input Positive edge, single CLOCK input Positive edge, single CLOCK input Positive edge, single CLOCK input Positive edge, single CLOCK input
Carry Function Look-ahead carry in both counting modes Look-ahead carry in both counting modes Look-ahead carry in both counting modes Look-ahead carry Look-ahead carry Look-ahead carry in both counting modes
Jam Inputs 4 individual JAM signals 4 individual JAM signals 4 individual JAM signals 4 individual JAM signals 4 individual JAM signals 4 individual JAM signals
Outputs Q1, Q2, Q3, Q4, CARRY OUT (5 outputs) Q1-Q4 plus CARRY OUT Q1-Q4 plus CARRY OUT Q1-Q4 plus CARRY OUT Q1-Q4 plus CARRY OUT Q1-Q4 plus CARRY OUT
Logic Family CMOS CD4000 series CMOS CD4000 series CMOS CD4000 series CMOS 4000 series CMOS 4000 series CMOS CD4000 series

تفاوت‌های کلیدی

  • Single-clock architecture avoids preset and clock race conditions (در مقابلCD4029BE)
  • Look-ahead carry in both counting modes speeds up cascaded dividers (در مقابلMC14029B)
  • Four asynchronous JAM inputs plus PRE-SET ENABLE give flexible loading (در مقابلHCF4029BE)
  • Single-sourcing option versus cross-brand equivalents (در مقابلMC14029B)

یادداشت‌های طراحی

Tie every unused CMOS input to a defined logic level. Leaving JAM1 to JAM4, BINARY/DECADE, UP/DOWN or PRE-SET ENABLE floating can drive the input stage into its linear region, producing unpredictable current draw and erratic counter behaviour. Use JAM inputs for immediate asynchronous overrides, and use PRE-SET ENABLE together with the JAM levels when the counter must be reloaded from a known value on the next active clock edge.

Keep the CLOCK trace short and driven by a single source; the CD4029BEX has one clock line and all state changes occur on its active edge, so a long or ring-shaped clock path can pick up noise and cause double counting. Route the four Q outputs away from the clock and JAM nets to limit coupling, and place the supply decoupling capacitor close to the VDD and VSS pins so switching noise on the board is not injected into the counter threshold.

Treat CARRY OUT strictly as an output. It is a look-ahead carry indicator, not a clock enable, so driving it from an external source creates contention on the output stage and unpredictable counting. Use the CARRY IN pin for gating, and connect CARRY OUT of one section only to the CLOCK input of the next section when building a cascaded divider chain, keeping the chain short so that propagation delay through the cascade stays well below the clock period.

Place a 0.1 uF ceramic bypass capacitor between VDD and VSS as close to the device pins as the layout allows, and add bulk decoupling on the shared supply rail if several CD4000 counters are used in the same assembly. CMOS counters draw current mainly at switching edges, so the supply must remain within the rated range at the pins, not just at the regulator output, and the ground return path should be short to avoid injecting supply ripple into the clock threshold.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The CD4029B family is a mature CMOS logic product; no explicit RoHS, REACH, lead-free or halogen-free declaration was stated on the manufacturer product page for this ordering code, so all entries are recorded as unknown rather than assumed.

تاریخ تأیید داده‌ها: 2026-11-19 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

cd4029be datasheet cd4029be pinout CD4029BEX datasheet pdf CD4029BEX 16 pin dip counter CD4029B up down counter pin assignment CD4029B datasheet pdf CD4029BEX drop-in replacement CD4029BEX vs MC14029B CD4029BEX equivalent 16-PDIP Texas Instruments CD4029BEX CD4029BEX price and stock CD4029BEX lead time request quote CD4029B binary decade counter application circuit CD4029B jam input preset logic

قطعات و اصطلاحات مرتبط

Texas Instruments CD4029BEX CD4029B CD4029BE CD4029BPW MC14029B HCF4029BE Harris Corporation onsemi STMicroelectronics counter IC up/down counter binary counter BCD decade counter CMOS CD4000 series logic IC look-ahead carry jam input pre-set enable CARRY OUT PDIP-16 through-hole package Q1-Q4 outputs
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ