CY8C3445LTI-087 - 8-Bit 50MHz 32KB Flash MCU | Infineon
MPN: CY8C3445LTI-087 ✓ فعالCY8C3445LTI-087 نمای کلی
A microcontroller is the central processing element of an embedded control system. It combines a CPU core, program memory, data memory, peripheral blocks, and I/O in one integrated circuit. An 8051 MCU belongs to the 8-bit microcontroller class, with an internal architecture designed for efficient control loops, human-interface input handling, and communication tasks. In the Infineon product hierarchy, the CY8C3445LTI-087 sits within the PSoC 3 CY8C34 family of mixed-signal embedded controllers.
Principal features include operation up to 50 MHz, 32 KB of flash organized as 32K x 8, an 8-bit processor architecture, and a 12-bit ADC capability associated with the CY8C34 family. The wide 1.71 V to 5.5 V supply range supports both low-voltage digital systems and conventional 5 V equipment. The 48-QFN exposed-pad package reduces footprint compared with larger leaded or fine-pitch packages while improving heat spreading when correctly bonded to PCB copper.
The PSoC architecture combines digital control with programmable analog and digital resources, allowing designs to use dedicated timers, serial interfaces, analog conversion, and general-purpose I/O instead of relying exclusively on discrete peripheral chips. The 8051 core provides a familiar programming model for cost-sensitive embedded products, while the 50 MHz clock rate gives designers additional performance margin for protocol handling and multi-peripheral coordination.
Typical applications include industrial control panels, compact sensor-hub controllers, digital thermometers, building equipment interfaces, low-cost data-acquisition modules, and embedded human-interface systems. It is particularly suitable where a 48-QFN footprint, low-voltage operation, and flash-resident control firmware are required. Designers should confirm startup behavior, clock configuration, peripheral routing, and programming requirements against the manufacturer datasheet before releasing a PCB.
For PCB design, follow the datasheet land pattern exactly and provide the exposed pad with a solder mask opening and copper pours on all layers. Keep decoupling capacitors close to the supply and ground pins, route sensitive analog signals away from high-current switching nodes, and verify thermal performance at the highest expected ambient temperature. Confirm the exact exposed-pad connection and pin functions in the pin-description table before assigning PCB nets.
جایگزینهای drop-in برای CY8C3445LTI-087 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای CY8C3445LTI-087 (همان فرمفاکتور و فوتپرینت) — متفاوت در Package.
CY8C3445LTI-078
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
CY8C3445LTI-081
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←CY8C3445LTI-087 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | 8-Bit Microcontroller |
| Product Family | PSoC 3 CY8C34xx |
| Processor Core | 8051 |
| حداکثر فرکانس کلاک | 50 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Supply Voltage Range | 1.71 V to 5.5 V |
| ADC Resolution | 12-bit |
| بستهبندی | 48-QFN (7 x 7 mm) |
| Package Type | 48-VFQFN with Exposed Pad |
| نوع نصب | Surface Mount |
| Programming Interface | ISP-SWD |
راهنمای پیکربندی پین CY8C3445LTI-087 48-vfqfn with exposed pad
پیکربندی پین برای CY8C3445LTI-087 (پکیج 48-vfqfn with exposed pad). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای CY8C3445LTI-087.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
CY8C3445LTI-087 مناسب است برای 6 کاربردs: Industrial Control Panel Controller, Low-Voltage Sensor Hub, Digital Thermometer and Environmental Monitor, Building Equipment Interface Module, Compact Data-Acquisition Module, Programmable Logic Controller.
Industrial Control Panel Controller
The CY8C3445LTI-087 suits a compact industrial control panel that coordinates button inputs, status indicators, timers, and a serial connection to a downstream controller. Its 50 MHz 8051 core provides ample processing margin for debouncing, menu logic, and communication routines, while 32 KB of flash holds panel firmware. The 1.71 V to 5.5 V operating range accommodates regulated 5 V panel rails. A 48-QFN footprint reduces board area, but the exposed pad must be tied and thermally coupled according to the manufacturer land pattern.
پیشنهادی
Low-Voltage Sensor Hub
The CY8C3445LTI-087 is appropriate for a distributed sensor hub that digitizes analog inputs and reports measurements over a serial bus. Its 12-bit ADC capability supports measurement channels, and the 50 MHz 8051 processor can handle sampling control, filtering, diagnostics, and communication framing. Operation down to 1.71 V allows use with low-energy sensors and modern digital power rails. Place input filtering and the ADC reference network away from fast-switching circuitry, then follow the exposed-pad thermal layout in the 7 x 7 mm QFN package.
پیشنهادی
Digital Thermometer and Environmental Monitor
A digital thermometer can use the CY8C3445LTI-087 to manage sensor sampling, temperature conversion, display updates, and alarm thresholds. The 8051 core provides an economical control path for a device that must run continuously without a high-power processor, while the 32 KB flash provides room for calibration tables and firmware. Its low-voltage capability supports compact battery-operated products, although the final power budget depends on the selected sensor and display. Confirm ADC accuracy and reference requirements against the manufacturer electrical characteristics.
پیشنهادی
Building Equipment Interface Module
The CY8C3445LTI-087 can serve as the communications and logic controller in a building-equipment interface module. Its programmable peripherals can coordinate timers, serial links, status inputs, and actuator outputs while the 50 MHz 8051 core executes protocol handling. The wide operating-voltage range supports 5 V controller boards and lower regulated rails where appropriate. For equipment connected to external wiring, add galvanic isolation or surge protection as required by the installation environment, and keep those protection paths separate from sensitive analog traces.
پیشنهادی
Compact Data-Acquisition Module
A compact data-acquisition module can use the CY8C3445LTI-087 for analog-to-digital conversion, sample timing, scaling, and host communication. The 12-bit ADC provides sufficient resolution for many industrial monitoring and process-control signals, while the 50 MHz 8051 core handles buffer management and command processing. Thirty-two kilobytes of embedded flash supports a self-contained application with calibration and configuration storage. Designers should use short analog traces, a quiet reference arrangement, and grounding that avoids shared return paths with switching loads.
پیشنهادی
Programmable Logic Controller
The CY8C3445LTI-087 is suitable for a small programmable logic controller that executes deterministic input scanning, output timing, and interlock logic. The 8051 core and 32 KB flash provide an economical platform for repeatable control tasks, while programmable PSoC blocks can implement additional timing and interface functions. The compact QFN package is useful in densely populated control boards. Firmware scheduling, watchdog behavior, and I/O drive limits must be validated against the datasheet, especially for inductive loads connected to the controller outputs.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای CY8C3445LTI-087 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | CY8C3445LTI-078 | CY8C3445LTI-081 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 48-QFN (7 x 7 mm) with Exposed Pad | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) |
| Product Family | PSoC 3 CY8C34xx | PSoC 3 CY8C34 Family | CY8C34xx |
تفاوتهای کلیدی
- Closest documented same-family alternative with matching core and clock (در مقابلCY8C3445LTI-078)
- Exact manufacturer listing for the required orderable code (در مقابلCY8C3445LTI-078)
- Compact exposed-pad package supports dense control boards (در مقابلCY8C3445LTI-081)
یادداشتهای طراحی
Use the manufacturer land pattern for the 48-VFQFN exposed-pad package without altering pad dimensions. Provide the specified solder-mask opening and route the exposed pad to its documented electrical connection. Distribute thermal vias within and around the pad according to the recommended pattern, and confirm the PCB fabricator can maintain the required hole tolerances. A short return path to the ground plane improves both power integrity and heat spreading.
Place the required bypass capacitors immediately adjacent to the device power and ground pins, with the shortest possible loop between supply, capacitor, and package pins. Follow the manufacturer recommendation for capacitor type, voltage rating, and quantity. Because the device operates from 1.71 V to 5.5 V, confirm the regulator output tolerance and startup ramp at the minimum operating voltage before finalizing the power tree.
Separate analog inputs and references from digital clock lines and switching-node return currents. Use a quiet reference region with a dedicated ground connection where the datasheet layout permits, and keep the ADC routing compact. Avoid routing programming signals near sensitive analog inputs when alternative routing is available. Validate threshold timing, ADC noise, and clock margins on the first prototypes because the small QFN footprint can make rework difficult.
Do not infer full pin compatibility from the CY8C34 family name alone. Ordering suffixes can select different package, temperature, or qualification options, and exposed-pad construction must match the PCB land pattern. Before releasing a substitution, compare the complete ordering tables, pin descriptions, electrical limits, startup characteristics, and programming configuration. Also confirm that the existing firmware does not rely on a feature removed or changed by the alternative suffix.
اطلاعات انطباق
Compliance declarations and automotive qualification status are not stated in the manufacturer-page or distributor excerpts for this exact ordering code. Review the current Infineon product documentation and declarations before production release.