C8051F504-IM - 50MHz 8051 MCU with 32KB Flash | Silicon Labs
MPN: C8051F504-IM ✓ فعالC8051F504-IM نمای کلی
A mixed-signal microcontroller combines a digital processor, analog measurement circuitry, and communications interfaces in one device. The C8051F50x family provides up to 50 MIPS of performance and integrates a 12-bit ADC within packages ranging from 32 to 48 pins. This combination allows automotive and industrial equipment designers to reduce component count while retaining dedicated communication channels for distributed control systems.
Key features include 50 MHz operation, 32 KB of Flash memory, 4.25 KB of RAM, a 32-channel 12-bit ADC, and operating-voltage options identified as 2.5 V, 3.3 V, and 5 V. The device also supports CAN 2.0, LIN 2.1, SPI, UART, and I2C. Silicon Labs describes pin-for-pin compatibility across the C8051F50x, C8051F51x, and C8051F58x/59x families, subject to the availability of matching package variants.
The C8051F50x architecture is designed for compact, high-performance embedded systems where communications and analog acquisition are both important. Its 50 MHz execution rate supports time-sensitive control tasks, while the mixed-signal resources allow direct connection of analog sensors without requiring a separate high-resolution converter. The 48-QFN format also keeps the PCB footprint relatively compact.
Typical uses include automotive body and chassis controllers, industrial automation equipment, CAN-based node controllers, LIN sub-networks, sensor-acquisition modules, motor-control subsystems, and compact communications gateways. The family is particularly suitable where several serial interfaces and one or more analog channels must coexist in a space-constrained assembly.
Layout should account for the exposed pad, analog ground and supply connections, high-speed clock routing, and communication signal integrity. Before replacing a device in an existing PCB, verify the exact suffix, package, exposed-pad connection, pin multiplexing, and firmware requirements rather than relying only on the C8051F50x family name.
This page combines device specifications, interface and package guidance, verified family compatibility information, and practical selection criteria. It also distinguishes exact drop-in candidates from variants that differ in package or ordering suffix, helping engineers shorten replacement evaluation without overlooking PCB or firmware compatibility.
جایگزینهای drop-in برای C8051F504-IM — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای C8051F504-IM (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, RAM, Programming Interface, ADC Resolution, CAN Interface.
C8051F501-IM
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
C8051F500-IM
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←C8051F504-IM حداکثر مقادیر مجاز و مشخصات الکتریکی
| Microcontroller Family | C8051F50x mixed-signal Flash MCU family |
| Processor Core | 8-bit 8051 CISC core |
| حداکثر فرکانس کلاک | 50 MHz |
| Maximum Performance | 50 MIPS |
| Flash Program Memory | 32 KB (32K x 8) |
| RAM | 4.25 KB |
| ADC Resolution | 12 bits |
| ADC Channels | 32 channels |
| CAN Interface | CAN 2.0 |
| LIN Interface | LIN 2.1 |
| Serial Interfaces | SPI, UART, and I2C |
| Supply Voltage Options | 2.5 V, 3.3 V, and 5 V |
| بستهبندی | 48-QFN (7 x 7 mm) |
| Automotive Qualification | AEC-Q100 qualified |
| Maximum Operating Temperature | 125 °C |
| نوع نصب | Surface mount |
| Programming Interface | In-system programming |
راهنمای پیکربندی پین C8051F504-IM 48-qfn (7 x 7 mm)
پیکربندی پین برای C8051F504-IM (پکیج 48-qfn (7 x 7 mm)). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای C8051F504-IM.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
C8051F504-IM مناسب است برای 6 کاربردs: Automotive CAN Controller, LIN Automotive Sub-Network Node, Industrial Sensor Acquisition Module, CAN-Based Automation Node, Motor and Actuator Control Subsystem, Compact Communications Gateway.
Automotive CAN Controller
The C8051F504-IM fits an automotive CAN controller because it combines a 50 MHz 8051 core, 32 KB Flash, 4.25 KB of RAM, and a CAN 2.0 interface in a 48-QFN package. Its 12-bit, 32-channel ADC can acquire sensor inputs while the processor handles message routing, diagnostics, and control logic. Designers should add the appropriate CAN transceiver, protection network, reference design, and firmware initialization. Verify the exact pin multiplexing and automotive qualification requirements before releasing a production design.
پیشنهادی
LIN Automotive Sub-Network Node
The C8051F504-IM is appropriate for a compact LIN node that must combine communication and local signal acquisition. Its LIN 2.1 interface handles low-cost vehicle-network communication, while the integrated 12-bit ADC supports pressure, temperature, position, and other sensor inputs. The 50 MHz core provides performance headroom for diagnostics and application logic. Implementation still requires a suitable LIN transceiver, correct termination, filtering, and a validated mapping between firmware and the device pin-multiplexing options.
پیشنهادی
Industrial Sensor Acquisition Module
The C8051F504-IM suits an industrial sensor-acquisition module because its 32-channel, 12-bit ADC reduces the need for a separate converter, while 32 KB Flash and 4.25 KB RAM accommodate application code and local buffering. SPI, UART, and I2C provide flexible links to sensors, signal conditioners, and host processors. At 50 MHz, the 8051 core can service time-critical sampling tasks. Validate the analog input range, acquisition timing, reference accuracy, grounding, and channel multiplexing in the target environment.
پیشنهادی
CAN-Based Automation Node
The C8051F504-IM works well in a CAN-based industrial automation node because it combines CAN 2.0, a 50 MHz processing core, and integrated analog conversion in one 48-QFN device. A compact controller can acquire local process signals and publish them over a CAN network while retaining SPI, UART, or I2C for local expansion. Use an external transceiver and protection components on the bus. The choice is especially attractive when space, mixed-signal integration, and deterministic control matter more than a software ecosystem change.
پیشنهادی
Motor and Actuator Control Subsystem
The C8051F504-IM can support a motor or actuator-control subsystem when the design requires fast control computation alongside analog feedback. Its 50 MHz 8051 core executes control logic, the 12-bit ADC measures position, current, or voltage, and CAN 2.0 or LIN 2.1 communicates with wider vehicle or machine networks. The 32 KB Flash and 4.25 KB RAM are adequate for embedded control firmware, but the designer must add appropriate power-stage drivers, current sensing, protection, and safe-state behavior.
پیشنهادی
Compact Communications Gateway
The C8051F504-IM is suitable for a compact communications gateway that must bridge serial interfaces and collect analog status data. Its 50 MHz core and 32 KB Flash can manage protocol conversion, while CAN 2.0, LIN 2.1, SPI, UART, and I2C provide multiple external connection options. The integrated 12-bit ADC can monitor local supply, temperature, or sensor channels without a separate converter. The 48-QFN package helps reduce board area, although EMC, thermal, and long-term availability requirements should be reviewed before deployment.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای C8051F504-IM — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | C8051F501-IM | C8051F500-IM |
|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) |
| Processor Core | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz |
تفاوتهای کلیدی
- High-speed 8051 processing with integrated mixed-signal conversion (در مقابلC8051F501-IM)
- Native CAN 2.0 and LIN 2.1 connectivity (در مقابلC8051F500-IM)
- Automotive-oriented 48-QFN integration (در مقابلC8051F504-IMR)
یادداشتهای طراحی
Use the exposed-pad land pattern and paste volume specified by Silicon Labs rather than treating the 48-QFN as a generic leadless package. The exposed pad is central to thermal performance and may also be tied to a supply or ground net. Preserve the manufacturer-recommended copper and solder-mask geometry, and check assembly capability because the 7 x 7 mm QFN is fine-pitch and sensitive to solder voiding.
Separate analog and digital returns carefully and place the MCU, analog input components, and external decoupling close to their associated pins. Keep the 50 MHz clock route short and away from CAN, LIN, and other high-current switching nodes. Route communication interfaces away from the exposed-pad thermal area where practical, and use the datasheet pin-description table to determine which pins can be multiplexed for analog, digital, or alternate peripheral functions.
Do not treat all C8051F50x suffixes as interchangeable. Confirm the QFN package, exposed-pad connection, temperature grade, AEC-Q100 qualification, Flash configuration, and peripheral differences for the exact replacement. A family-level statement of pin-for-pin compatibility does not guarantee identical behavior when pin multiplexing, clock sources, ADC channels, or legacy firmware depend on device-specific options.
اطلاعات انطباق
The C8051F504-IM is described as AEC-Q100 qualified and tested for enhanced temperature operation up to 125 °C. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product declaration.