DG406DJZ - 16:1 CMOS Analog Multiplexer | Renesas
MPN: DG406DJZ ✓ فعالDG406DJZ نمای کلی
A CMOS analog multiplexer is an interface IC that connects multiple signal paths to one shared internal node. Its position in the hierarchy is analog switch -> multiplexer -> interface IC -> semiconductor. Unlike a mechanical switch, the DG406DJZ changes channels electronically according to binary select inputs, allowing a microcontroller or other digital controller to scan sensors, measurements, or communication lines efficiently.
The DG406DJZ uses four binary select inputs to address 16 channels. Its enable function allows the selected device to be disabled while other multiplexers share the same system bus, which is useful in larger routing or measurement systems. The 100 ohm maximum on-state resistance and TTL/CMOS-compatible decoding simplify interface design in both legacy and modern control systems.
The monolithic CMOS implementation integrates 16 analog switches, address decoding, logic-threshold referencing, and enable control. According to the Renesas DG406 and DG407 datasheet, this device family was designed as a drop-in replacement for the popular DG506A and DG507A series. That heritage supports board-level modernization when existing multiplexer footprints must be retained.
Typical applications include data-acquisition systems, audio signal routing, test equipment, communication systems, sample-and-hold circuits, and guidance or control systems. The enable input is particularly useful when several multiplexers share a common output or when a system requires deliberate isolation of an inactive routing node.
When laying out a PCB, place the selected signal source and destination traces away from digital address and enable lines, and terminate unused channels according to the manufacturer's application guidance. Check the absolute maximum ratings, supply-voltage limits, and switch-state behavior in the datasheet before applying signals or changing the logic reference configuration.
This product page combines the manufacturer family documentation, verified distributor packaging information, a focused comparison of genuine 28-pin alternatives, and practical integration guidance for engineers evaluating the DG406DJZ as a retrofit or new-design multiplexer.
جایگزینهای drop-in برای DG406DJZ — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای DG406DJZ (همان فرمفاکتور و فوتپرینت) — متفاوت در Multiplexer Configuration.
DG406DJ+
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DG406DJ+
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DG406DJZ-E3
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
DG406DJ+
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DG406DJZ
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DG406DJZ مشخصات
| Product Type | 1 circuit IC switch |
| Multiplexer Configuration | 16:1 |
| Number of Channels | 16 channels |
| On-State Resistance | 100 ohm maximum |
| Number of Circuits | 1 circuit |
| بستهبندی | 28-pin PDIP |
| تعداد پایه | 28 pins |
| نوع نصب | Through-hole |
| Logic Compatibility | TTL and CMOS compatible |
| Enable Control | Yes |
| Logic Threshold Reference | Internal voltage reference |
| Lead-Free Status | Lead free |
| وضعیت RoHS | RoHS compliant |
راهنمای پیکربندی پین DG406DJZ 28-pin pdip
پیکربندی پین برای DG406DJZ (پکیج 28-pin pdip). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای DG406DJZ.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
DG406DJZ مناسب است برای 6 کاربردs: Multichannel Data Acquisition, Audio Signal Routing, Test and Measurement Systems, Communication Signal Multiplexing, Sample-and-Hold Signal Conditioning, Guidance and Control Systems.
Multichannel Data Acquisition
The DG406DJZ fits data-acquisition front ends that scan up to 16 analog inputs with one shared converter input. Four select lines address the channel while the enable input gives the controller a way to disable the device when multiple routing nodes coexist. Its 100 ohm maximum on-state resistance must be included in the acquisition-time calculation, particularly when driving a high-impedance ADC input. Keeping the multiplexed trace short helps prevent the added switch resistance and node capacitance from limiting settling accuracy. The 16:1 arrangement also reduces analog routing hardware compared with bringing every sensor channel directly to the converter.
پیشنهادی
Audio Signal Routing
The DG406DJZ can route one of 16 audio or control lines to a common amplifier, codec, or measurement input. Its monolithic CMOS implementation avoids the mechanical contact resistance and switching transients associated with traditional rotary selection. The 100 ohm maximum on-state resistance is acceptable for many line-level audio paths but can create excessive attenuation when combined with a high source impedance. Keep the selected trace away from digital address lines and use a low-impedance input stage when signal level and distortion requirements are tight.
پیشنهادی
Test and Measurement Systems
The DG406DJZ is useful in test equipment that must connect one of 16 sources to a common instrument input. Digital channel selection permits repeatable matrix-style routing, while enable control supports systems containing more than one multiplexer. The 100 ohm maximum on-state resistance contributes to source loading, so the test plan should include the impedance of the source, cable, and measurement input. For high-frequency or low-amplitude measurements, verify settling behavior and channel matching in the manufacturer electrical-characteristics tables before using the device as a precision scanner.
پیشنهادی
Communication Signal Multiplexing
The DG406DJZ can select among 16 communication or line-level inputs for centralized monitoring. TTL- and CMOS-compatible decoding makes the address interface practical for common digital controllers, while the enable function helps isolate inactive devices on a shared bus. Designers should not interpret the 100 ohm maximum on-state resistance as suitable for every communications standard; impedance, logic levels, insertion loss, and crosstalk requirements depend on the line being routed. A controlled ground-plane layout and short analog paths will reduce coupling from the rapidly changing select signals.
پیشنهادی
Sample-and-Hold Signal Conditioning
The DG406DJZ can present one selected input to a sample-and-hold or acquisition circuit, making it appropriate for sequential signal conditioning. Four binary select inputs define the active source, and enable provides an additional control point for system sequencing. The switch's 100 ohm maximum on-state resistance must be combined with source impedance and acquisition capacitance to estimate settling performance. Keep the multiplexer close to the sampling node, use a defined return path, and confirm that no selected channel can exceed the applicable analog signal limits.
پیشنهادی
Guidance and Control Systems
The DG406DJZ supports guidance and control systems that monitor multiple analog feedback channels using a shared controller. Sixteen channels provide useful consolidation when sensors are slower than the digital control loop, and the enable input helps coordinate multiple multiplexers during mode changes. The maximum on-state resistance of 100 ohm can affect sensor loading or amplifier headroom, so each channel should be evaluated for bias current, impedance, and fault current. The controller should also enforce defined states on the address and enable lines to prevent unintended routing during reset or startup.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای DG406DJZ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | DG406DJ | DG406DJ+ | DG406DJZ-E3 | DG406DJ | DG406DJZ |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Vishay Intertechnology | Renesas Electronics | Vishay Intertechnology | Analog Devices | Intersil Corporation |
| Package | 28-pin PDIP | 28-pin PDIP - same | 28-pin PDIP - same | 28-pin PDIP - same | 28-pin PDIP - same | 28-pin PDIP - same |
| Multiplexer Configuration | 16:1 | 16:1 | 16:1 | 16:1 | 16:1 | 16:1 |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
| Number of Channels | 16 channels | 16 channels | 16 channels | 16 channels | 16 channels | 16 channels |
تفاوتهای کلیدی
- Maintains the established 28-pin PDIP routing architecture (در مقابلDG406DN+)
- Provides the full 16-channel single-ended mux function (در مقابلDG407DJZ)
- Uses a standard 100 ohm maximum on-state resistance (در مقابلDG406DJ)
یادداشتهای طراحی
Route the common analog node and selected channel traces as short, direct paths, and place the DG406DJZ near the source or destination that imposes the tighter impedance and settling requirements. Keep the four select inputs and enable line away from sensitive analog traces because their switching transitions can couple into the multiplexed node. A continuous ground plane and a short return path for digital control signals will reduce susceptibility to channel crosstalk.
Do not select a replacement from package appearance alone. Confirm the complete 28-pin PDIP pin assignment, 16:1 configuration, logic levels, enable truth table, supply limits, analog signal range, and maximum on-state resistance. The DG406DJ and DG406DJ+ share the principal architecture, but manufacturer-specific timing and absolute-maximum-rating differences can still affect an existing board revision.
Include the 100 ohm maximum on-state resistance, source impedance, capacitance, and acquisition time when evaluating settling error. For a high-impedance sensor or ADC input, the mux resistance can dominate the charging network and cause incomplete settling between channel changes. Increase the available acquisition interval or use a lower-impedance buffer, then verify the result against the manufacturer's switching and channel-matching characteristics.
Define valid logic states for all select and enable inputs during reset, power-up, and firmware faults. Floating control inputs can create unintended channel transitions or uncertain device-enable behavior. Use the datasheet truth table, pull resistors where appropriate, and controller initialization that writes a known address and enable state before the analog system begins acquisition.
اطلاعات انطباق
The DG406DJZ is identified as lead free and RoHS compliant. It is not identified as an AEC-Q100 qualified automotive component.