Silicon Labs

EFM32TG825F16-BGA48T - 32MHz Cortex-M3 16KB MCU | Silicon Labs

MPN: EFM32TG825F16-BGA48T ✗ پایان تولید
1.85 V to 3.8 V Vdss Approximately 1.0 µA at 3 V Id 48-BGA (4x4 mm) Package 32 MHz Speed 16KB (16K x 8) Memory
حداقل سفارش: 1 |

EFM32TG825F16-BGA48T نمای کلی

Silicon Labs EFM32TG825F16-BGA48T is a 32-bit Tiny Gecko microcontroller with a 32 MHz ARM Cortex-M3 core, 16KB flash memory, and a 48-BGA 4x4 mm package. Its 1.85 V to 3.8 V operating supply supports low-energy embedded systems, while the 48-ball package provides a compact option for space-constrained designs.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, RAM, and peripherals into one device. The EFM32 Tiny Gecko family belongs to the embedded microcontroller hierarchy, combining an ARM Cortex-M3 processor with energy-management peripherals designed for battery-operated and always-on products. The T suffix identifies the tape-and-reel ordering configuration for the EFM32TG825F16-BGA48 device.

The device combines a 32 MHz ARM Cortex-M3 core with 16KB of flash and low-power operating features. Its supply range of 1.85 V to 3.8 V accommodates common single-cell and low-voltage rails. Energy-conscious applications can use the MCU's deep-sleep capability, power-on reset, brown-out detection, and retained RAM or CPU state. The family documentation also identifies a deep-sleep current of approximately 1.0 µA at 3 V when the RTC and 32.768 kHz oscillator are included.

The Tiny Gecko architecture is intended for low-energy embedded control. Its 32-bit Cortex-M3 instruction set provides substantially greater arithmetic capability than an 8-bit controller while retaining a compact, deterministic embedded footprint. Integrated low-power peripherals allow firmware to spend more time in energy-saving states and return to active operation without requiring the application to recreate volatile state after every sleep cycle.

Typical uses include battery-powered sensor nodes, industrial condition-monitoring devices, compact energy-harvesting products, wearable accessories, and portable measurement equipment. The 16KB program memory suits applications with focused control logic, protocol handling, and modest local data processing. Firmware capacity should be checked against the final application code, protocol stacks, bootloader, and update mechanism.

Board design must follow the manufacturer package drawing and pin-description table, particularly for exposed-pad, ground-ball, and power-routing requirements. Place decoupling capacitors close to the supply pins, route sensitive inputs away from switching nodes, and provide a clean low-impedance ground reference. Confirm BGA assembly capability and ball-pitch constraints with the selected PCB manufacturer before committing the layout.

This product page combines the manufacturer's device characteristics with practical selection guidance, same-family drop-in alternatives, package information, power-budget considerations, and engineering-oriented comparisons. These resources help teams assess package complexity, memory requirements, lifecycle constraints, and low-power suitability before integrating the EFM32TG825F16-BGA48T into a new PCB.

جایگزین‌های drop-in برای EFM32TG825F16-BGA48T — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای EFM32TG825F16-BGA48T (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Flash Memory, Package, RAM, Product Type, Supply Voltage Range.

Silicon Labs
Flash Memory: 8 KB (8K x 8)
Package: 48-BGA (4 x 4 mm)
RAM: 2 KB (2K x 8)
مقایسه با EFM32TG825F16-BGA48T →
Silicon Labs
Flash Memory: 16 KB (16K x 8)
Package: 48-BGA (4 mm x 4 mm)
RAM: 4 KB
مقایسه با EFM32TG825F16-BGA48T →
Silicon Labs
Flash Memory: 32 KB (32K x 8)
Package: 48-BGA (4 x 4 mm)
RAM: 4 KB
مقایسه با EFM32TG825F16-BGA48T →
Silicon Labs
Flash Memory: 8 KB (8K x 8)
RAM: 2 KB
Product Type: 32-bit ARM Cortex-M3 microcontroller
مقایسه با EFM32TG825F16-BGA48T →

EFM32TG825F8-BGA48T

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Silicon Labs
📦 48-BGA (4x4 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · ARM Cortex-M3 · 32 MHz · 8 KB (8K x 8) · 2 KB · 37 pins · 2 x 16-bit timers

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

EFM32TG225F32-BGA48T

✅ جایگزین مستقیم
📦 48-BGA (4x4 mm)
32KB flash versus 16KB, a 100% increase; 32 MHz Cortex-M3 operating class and 48-BGA package retained

📋 جایگزین مرجع (خارج از کاتالوگ)

EFM32TG225F8-D-BGA48R

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Silicon Labs
📦 48-BGA (4x4 mm)
32-bit ARM Cortex-M3 Microcontroller · EFM32 Tiny Gecko · 32 MHz · 8 KB (8K x 8) · 2 KB (2K x 8) · ARM Cortex-M3, 32-bit single-core · 1.98 V to 3.8 V · 48-BGA (4 x 4 mm)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

EFM32TG825F32-BGA48T

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Silicon Labs
📦 48-BGA (4x4 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · ARM Cortex-M3, 32-bit RISC · 32 KB (32K x 8) · 4 KB · 1.85 V to 3.8 V · 48-BGA (4 x 4 mm)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

EFM32TG825F16-BGA48T حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 32-bit embedded microcontroller
Series EFM32 Tiny Gecko
Processor Core ARM Cortex-M3
CPU Speed 32 MHz
Flash Memory 16KB (16K x 8)
Supply Voltage Range 1.85 V to 3.8 V
Deep-Sleep Current Approximately 1.0 µA at 3 V
Deep-Sleep Configuration Includes RTC with 32.768 kHz oscillator
Power Management Features Output state retention, wake-up from Shutoff Mode, RAM retention, and CPU retention
Reset Features Power-on reset and brown-out detector
Architecture Single-core
بسته‌بندی 48-BGA (4x4 mm)
نوع نصب Surface mount
Ordering Suffix T tape-and-reel configuration

راهنمای پیکربندی پین EFM32TG825F16-BGA48T 48-bga (4x4 mm)

پیکربندی پین برای EFM32TG825F16-BGA48T (پکیج 48-bga (4x4 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 48-bga (4x4 mm) برای EFM32TG825F16-BGA48T

داده پین‌آوت تفصیلی موجود نیست برای EFM32TG825F16-BGA48T.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

EFM32TG825F16-BGA48T مناسب است برای 6 کاربردs: Battery-Powered Environmental Sensor Node, Industrial Condition Monitoring, Wearable Accessory Controller, Portable Medical Sensor Interface, Smart Home Sensor Hub, Energy-Harvesting Controller.

🧩

Battery-Powered Environmental Sensor Node

The EFM32TG825F16-BGA48T fits compact environmental sensors that periodically measure temperature, humidity, or air quality and then return to a low-power state. Its 32 MHz ARM Cortex-M3 core provides enough processing capability for local filtering and sensor compensation within a 16KB flash budget. The approximately 1.0 µA deep-sleep current at 3 V, together with RAM and CPU retention, can reduce the energy cost of inactive periods. Use a duty-cycled sampling strategy, retain calibration data in nonvolatile memory, and activate the radio only after measurement completion to maximize battery life.

🏭

Industrial Condition Monitoring

The EFM32TG825F16-BGA48T is suitable for factory equipment that monitors vibration, temperature, or machine state while avoiding a large wired controller. Its 32 MHz Cortex-M3 core can execute control logic, threshold checks, and a compact industrial communication routine, while the 48-BGA package limits board area. The device's 1.85 V to 3.8 V operating range supports regulated sensor and communication rails. For industrial deployments, design the power supply for the full temperature range, include brown-out monitoring, and isolate high-energy motor or relay switching from sensitive sensor inputs.

📱

Wearable Accessory Controller

The EFM32TG825F16-BGA48T can serve as the central controller in a compact wearable accessory where the application performs simple button, motion, or haptic logic rather than intensive data processing. Its 48-BGA 4x4 mm package supports dense board layouts, and the Cortex-M3 architecture provides 32-bit processing with a compact software footprint. The deep-sleep state, RTC support, and state-retention features are useful between user interactions. Care must be taken to match the MCU and radio supplies, place decoupling close to the device, and keep antenna and sensor routing away from noisy power paths.

💊

Portable Medical Sensor Interface

The EFM32TG825F16-BGA48T is appropriate for a portable sensing accessory that handles acquisition control, signal conditioning supervision, and low-power data buffering. Its 32 MHz Cortex-M3 core supports deterministic digital filtering and device-state management, while 16KB of flash can hold a focused firmware image when code size is carefully managed. The low-power shutdown and wake-up behavior can support a duty-cycled acquisition system. Use the exact pin assignments, medical-device risk controls, calibration strategy, and isolation requirements applicable to the finished product; the MCU qualification status itself is not established.

🏠

Smart Home Sensor Hub

The EFM32TG825F16-BGA48T can manage a small collection of low-power sensors in a smart-home endpoint, coordinating measurements and communicating status over a compact serial link. The 32 MHz Cortex-M3 core handles protocol framing and local logic, while the 48-BGA footprint supports dense multi-sensor boards. Its deep-sleep current of approximately 1.0 µA at 3 V helps when the endpoint spends most of its time inactive. Choose an appropriate communication companion, maintain deterministic timing for sensor updates, and include brown-out recovery so intermittent power faults do not corrupt device configuration.

⚡

Energy-Harvesting Controller

The EFM32TG825F16-BGA48T is suited to energy-harvesting endpoints that store limited harvested energy and operate only when sufficient voltage is available. Its 1.85 V to 3.8 V supply range, low-power modes, and approximately 1.0 µA deep-sleep current help reduce continuous energy demand. The 16KB flash allocation is adequate for focused energy-management, sampling, and state-machine firmware when code size is controlled. A practical design should measure the real harvester output, regulate it for the MCU rail, account for capacitor leakage, and prevent writes to nonvolatile memory from occurring more frequently than the harvested energy budget can support.

What are the key specifications of EFM32TG825F16-BGA48T that engineers should know?
The EFM32TG825F16-BGA48T combines a 32 MHz ARM Cortex-M3 core, 16KB of flash, and a 1.85 V to 3.8 V supply in a 48-BGA package. According to the EFM32TG825 datasheet, the device also supports deep-sleep operation, output-state retention, wake-up from Shutoff Mode, RAM retention, CPU retention, power-on reset, and brown-out detection. These characteristics position it as a compact low-power MCU for focused embedded-control tasks.
What is the operating voltage of EFM32TG825F16-BGA48T?
The EFM32TG825F16-BGA48T operates from 1.85 V to 3.8 V. According to the Silicon Labs EFM32TG825 technical documentation, this range supports low-voltage embedded systems operating from common single-cell energy sources and regulated 3.3 V rails. The peripheral configuration and clock tree must remain within the datasheet limits at both the lower and upper supply boundaries.
Where can I download the EFM32TG825F16-BGA48T datasheet PDF?
The EFM32TG825F16-BGA48T datasheet PDF is available through the manufacturer-linked document at the datasheet URL on this page. The document covers the EFM32TG825 family and includes electrical characteristics, low-power behavior, package information, and device pin descriptions. Use the EFM32TG825-specific tables and the exact BGA48 drawing when assigning signals and designing the PCB.
Where can I find the EFM32TG825F16-BGA48T pinout?
The EFM32TG825F16-BGA48T pinout is defined in the pin-description table and package drawing within the EFM32TG825 datasheet. The device uses a 48-BGA, 4x4 mm package with 48 ball positions. Use those documents for complete ball assignments, power pins, ground connections, and exposed-pad requirements rather than relying on a generic BGA drawing.
What can replace EFM32TG825F16-BGA48T?
The closest same-family drop-in candidates are other EFM32TG825 and EFM32TG225 devices configured in the 48-BGA package, including EFM32TG825F8-BGA48T and EFM32TG225F32-BGA48T. Their flash capacities differ from the target's 16KB, so hardware compatibility does not automatically guarantee firmware compatibility. Confirm the complete pin table, peripheral mapping, memory requirement, and software configuration before replacing the device.
Is EFM32TG825F16-BGA48T the same as EFM32TG225F32-BGA48T?
No, the EFM32TG225F32-BGA48T is not identical to the EFM32TG825F16-BGA48T. Both belong to the Tiny Gecko family and use a 48-BGA package, but the latter has 32KB of flash compared with the target's 16KB and belongs to the TG225 device group. Use it as a potential hardware drop-in only after checking every ball assignment and validating the application firmware.
EFM32TG825F16-BGA48T vs EFM32TG225F32-BGA48T: which is better for a compact sensor node?
Choose the EFM32TG225F32-BGA48T when a compatible 48-BGA layout needs twice the flash of the EFM32TG825F16-BGA48T, while retaining the target's 32 MHz Cortex-M3 operating class. The EFM32TG825F16-BGA48T may be preferable when its established firmware and 16KB memory budget are sufficient. The decision should also consider device status, peripheral configuration, and long-term availability.
When should I choose EFM32TG825F16-BGA48T over EFM32TG225F32-BGA48T?
Choose the EFM32TG825F16-BGA48T when an existing design, verified board, or approved firmware depends specifically on the TG825 device behavior and its 16KB flash allocation is adequate. Choose the EFM32TG225F32-BGA48T when the 48-BGA footprint is reusable and the larger flash requirement justifies a family change. Either choice requires validation of power management, clocking, peripherals, and software support.
Is EFM32TG825F16-BGA48T suitable for battery-powered sensor applications?
Yes, the EFM32TG825F16-BGA48T is suitable for battery-powered sensing when the design uses its low-power modes appropriately. The family documentation reports approximately 1.0 µA deep-sleep current at 3 V with the RTC and 32.768 kHz oscillator included, along with RAM and CPU state retention. Actual battery life also depends on sensor duty cycle, active-current demand, regulator efficiency, and wake-up frequency.
How much power does EFM32TG825F16-BGA48T consume in deep-sleep mode?
The EFM32TG825F16-BGA48T can reach approximately 1.0 µA at a 3 V supply in the documented deep-sleep configuration that includes the RTC and a 32.768 kHz oscillator. This figure describes a specific low-power state rather than continuous operating consumption. Evaluate the complete duty cycle, including sensor sampling, radio activity, and regulator quiescent current, when calculating runtime.
Where to buy EFM32TG825F16-BGA48T online?
Use the Request a Quote form on this page to request EFM32TG825F16-BGA48T availability, current lead time, and minimum order quantity. The EFM32TG825F16-BGA48T is identified as discontinued in comparison data, so availability should be confirmed before committing a new production design. Request the exact tape-and-reel suffix and any required traceability information with the quotation.
What is the price of EFM32TG825F16-BGA48T?
Submit the EFM32TG825F16-BGA48T part number through the Request a Quote form on this page for current pricing and quantity-break terms. Because this device is discontinued, the commercial result can depend on lot traceability, remaining inventory, and packaging configuration. Do not substitute an unverified price from a different package, temperature grade, or EFM32 family member.
What is the lead time and stock status for EFM32TG825F16-BGA48T?
Request current stock, lead time, and minimum order quantity through the Request a Quote form on this page. The EFM32TG825F16-BGA48T is listed as discontinued, so no manufacturing lead time should be assumed for new production quantities. A quotation request should also confirm whether any available material is factory packaged, traceable, and suitable for the intended assembly process.
What is the lifecycle status of EFM32TG825F16-BGA48T?
The EFM32TG825F16-BGA48T is listed as discontinued and not for new designs in comparison data. New-product teams should generally avoid creating a fresh base design around this device unless lifecycle risk is explicitly accepted and a supply plan is secured. Existing products may require a redesign using a supported MCU with suitable package, memory, peripheral, and software compatibility.
Are EFM32TG825F16-BGA48T and EFM32TG225F8-D-BGA48R RoHS compliant?
The RoHS status cannot be confirmed from the available product listing, so it should be treated as unknown until checked in the manufacturer compliance documentation for the exact orderable MPN. The EFM32TG825F16-BGA48T and EFM32TG225F8-D-BGA48R are related Tiny Gecko devices, but a family-level statement does not automatically establish compliance for a specific package and ordering suffix. Request the material declaration or product-compliance record before production release.

داده‌های مرجع مهندسی برای EFM32TG825F16-BGA48T — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the EFM32TG825F16-BGA48T for an existing Tiny Gecko design that specifically depends on the TG825 configuration, requires the 16KB flash allocation, and operates from a 1.85 V to 3.8 V rail. Its 32 MHz Cortex-M3 core and low-power retention features suit compact sensor nodes, industrial monitors, and battery-operated accessories. Choose EFM32TG825F8-BGA48T only when 8KB is sufficient and lower memory use is useful. Choose EFM32TG225F32-BGA48T when the 48-BGA footprint can be reused and 32KB of flash simplifies firmware expansion. Choose EFM32TG225F8-D-BGA48R for a lower-flash Tiny Gecko option. In every case, compare the exact pin table, peripheral configuration, startup code, and lifecycle status; a shared package does not by itself guarantee drop-in firmware compatibility.

مقایسه با جایگزین‌ها

پارامتر این محصول EFM32TG825F8-BGA48T EFM32TG225F32-BGA48T EFM32TG225F8-D-BGA48R EFM32TG825F32-BGA48T
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 48-BGA (4x4 mm) 48-BGA (4x4 mm) 48-BGA (4x4 mm) 48-BGA (4x4 mm) 48-BGA (4x4 mm)
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
CPU Speed 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 16KB 8KB 32KB 8KB 32KB
Core Architecture Tiny Gecko Tiny Gecko Tiny Gecko Tiny Gecko Tiny Gecko
Low-Power Features Output-state retention, wake-up from Shutoff Mode, RAM retention, CPU retention, RTC, power-on reset, and brown-out detection Tiny Gecko low-power feature set Tiny Gecko low-power feature set Tiny Gecko low-power feature set Tiny Gecko low-power feature set

تفاوت‌های کلیدی

  • Balanced memory configuration within the Tiny Gecko family (در مقابلEFM32TG825F8-BGA48T)
  • Lower memory footprint than the 32KB family option (در مقابلEFM32TG225F32-BGA48T)
  • Defined low-power behavior for duty-cycled products (در مقابلEFM32TG225F8-D-BGA48R)

یادداشت‌های طراحی

Use the manufacturer BGA48 land pattern and pin-description table rather than a generic 48-ball library. Place all decoupling capacitors directly between the appropriate supply and ground balls with very short traces. Confirm the board's ball-pitch support, solder-mask and paste design, via-in-pad policy, and assembly capability before release because the 4x4 mm BGA package is sensitive to coplanarity and reflow-profile variation.

Estimated: a 3.0 V supply operating at 1.85 V with an active-state current of 10 mA would dissipate approximately 11.5 mW in the MCU, calculated as (3.0 V - 1.85 V) × 10 mA. This example excludes board-level regulator losses and does not represent a datasheet operating point. Select the supply rail and regulator according to peak active current, wake-up demand, peripheral load, and the battery's usable voltage range.

Keep the 32.768 kHz crystal and its supporting components close to the designated oscillator balls, with short, symmetrical traces and a quiet ground return. Avoid routing the RTC oscillator beneath or beside noisy switching converters and high-current LED paths. Follow the manufacturer's recommended load capacitance and grounding arrangement; incorrect PCB capacitance can change startup behavior, clock accuracy, and power consumption.

Do not treat a package-compatible family alternative as firmware-compatible. Flash size, peripheral availability, interrupt mapping, startup code, and device-specific configuration can differ even when the processor class and BGA outline match. Build each replacement with the appropriate Silicon Labs device headers, verify the complete pin table, run boundary tests at 1.85 V and 3.8 V, and validate low-power wake-up behavior before production use.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance attributes were not identified in the available manufacturer or distributor records. Confirm the exact orderable MPN with the manufacturer compliance documentation before production release.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

EFM32TG825F16-BGA48T datasheet EFM32TG825F16-BGA48T pinout EFM32TG825F16-BGA48T datasheet pdf EFM32TG825F16-BGA48T specifications EFM32TG825F16-BGA48T equivalent EFM32TG825F16-BGA48T replacement EFM32TG825F16-BGA48T vs EFM32TG225F32-BGA48T EFM32TG825F16-BGA48T footprint EFM32TG825F16-BGA48T price EFM32TG825F16-BGA48T stock Silicon Labs EFM32TG825F16-BGA48T EFM32TG825F16 48 BGA pinout

قطعات و اصطلاحات مرتبط

Silicon Labs EFM32TG825F16-BGA48T EFM32TG825F8-BGA48T EFM32TG225F32-BGA48T EFM32TG225F8-D-BGA48R EFM32TG825F32-BGA48T EFM32 Tiny Gecko ARM Cortex-M3 embedded microcontroller 32-bit microcontroller microcontroller hierarchy low-power MCU deep-sleep mode Shutoff Mode output-state retention RAM retention CPU retention real-time clock 32.768 kHz oscillator brown-out detector power-on reset 1.85 V to 3.8 V supply 16KB flash 48-BGA 4x4 mm BGA
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ