Renesas Electronics

ICS548G-05 - Low-Jitter PLL Clock Synthesizer | Renesas

MPN: ICS548G-05 ✗ پایان تولید
3.15 V to 5.5 V Vdss 16-pin TSSOP, 4.40 mm width Package 49.152 MHz Speed
حداقل سفارش: 1 |

ICS548G-05 نمای کلی

Renesas Electronics ICS548G-05 is a low-cost, low-jitter PLL clock synthesizer designed to generate x16 and x24 clocks from T1 and E1 reference frequencies, with a listed output frequency of 49.152 MHz and operation from 3.15 V to 5.5 V. The device is packaged in a surface-mount 16-pin TSSOP with a 4.40 mm body width. It is intended for communications timing, audio sampling-rate generation, and clock-distribution designs requiring multiple related outputs from one reference.

A PLL clock synthesizer is a clock-and-timing integrated circuit that multiplies or divides a reference signal and then distributes the resulting clock through dedicated output drivers. Within the product hierarchy, the ICS548G-05 is a clock synthesizer and frequency multiplier, a member of the broader PLL and clock-management IC category, and ultimately part of the semiconductor timing-control ecosystem. Its low-jitter design makes it useful where the synthesized clock must support timing-sensitive digital or communications functions.

Key features include a 16-pin TSSOP package, a 3.15 V to 5.5 V supply range, and synthesis of x16 and x24 clocks from T1 and E1 frequencies. The manufacturer describes the ICS548-05 as a low-cost, high-performance clock synthesizer using patented analog/digital PLL techniques. It accepts a crystal or clock input and generates popular communications frequencies, allowing multiple related clock outputs to replace separate oscillator arrangements. The listed 49.152 MHz output is directly associated with audio-clock and sampling-rate use cases.

The PLL architecture separates frequency generation from the external reference source. A crystal or clock input establishes the reference, while the internal synthesizer produces the required derived clock frequencies. Output drivers then provide CLK and related divided or multiplied clock signals. Publicly indexed descriptions also identify CLK and CLK/2 outputs, tri-state capability, and low-skew clock distribution, making the device relevant to designs that need multiple synchronized signals rather than a simple single-ended oscillator.

Typical uses include MP3 and digital-audio systems, communications equipment operating around T1 and E1 timing, and clock trees for digital signal processors, converters, and interface logic. The 16-TSSOP format supports compact surface-mount assemblies while exposing reference, power, control, and clock-output functions. In a typical circuit, the reference source and required decoupling capacitors are placed close to the device, while each clock trace is routed to minimize loading and preserve edge quality.

Design attention should center on reference stability, correct mode selection, output loading, and power sequencing. Because PLL jitter and phase error depend on the reference source and loop operating conditions, the crystal or external clock must meet the timing requirements stated in the manufacturer datasheet. Keep clock traces short, avoid unnecessary stubs, and use controlled-impedance routing when the output drives longer PCB paths. Confirm all supply, ground, and output connections against the package pin-description table before layout release.

This product page combines the manufacturer's device description with practical clock-tree guidance, drop-in option analysis, and application-oriented design context. It helps engineers distinguish the ICS548G-05 from ordinary fixed-frequency oscillators and generic dividers by focusing on its PLL-based synthesis, x16 and x24 multiplication functions, low-jitter communications-clock role, and compact 16-TSSOP implementation.

جایگزین‌های drop-in برای ICS548G-05 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

ICS548G-05I

✅ جایگزین مستقیم
📦 TSSOP-16
49.152 MHz listed output, 3.15 V to 5.5 V supply, and 16-TSSOP footprint remain unchanged; the I suffix changes the ordering grade

📋 جایگزین مرجع (خارج از کاتالوگ)

ICS548G-05C

✅ جایگزین مستقیم
📦 TSSOP-16
49.152 MHz listed output, 3.15 V to 5.5 V supply, and 16-TSSOP footprint remain unchanged; the C suffix changes the ordering grade

📋 جایگزین مرجع (خارج از کاتالوگ)

ICS548G-05LF

✅ جایگزین مستقیم
📦 TSSOP-16
49.152 MHz listed output, 3.15 V to 5.5 V supply, and 16-TSSOP footprint remain unchanged; the LF suffix identifies the lead-free ordering configuration

📋 جایگزین مرجع (خارج از کاتالوگ)

548G-05LF

✅ جایگزین مستقیم
📦 TSSOP-16
49.152 MHz listed output, 3.15 V to 5.5 V supply, and 16-TSSOP footprint remain unchanged; the shortened ordering code represents the same LF family configuration

📋 جایگزین مرجع (خارج از کاتالوگ)

ICS548G-05 مشخصات

Device Type PLL clock synthesizer and frequency multiplier
Listed Output Frequency 49.152 MHz
Supply Voltage Range 3.15 V to 5.5 V
Input Frequency 2.05 MHz
Multiplication Functions x16 and x24
Reference Input Crystal or clock input
PLL Architecture Analog/digital phase-locked loop
Output Signals CLK and CLK/2
Clock Skew 500 ps
Non-PLL Maximum Clock Input 160 MHz
Output Enable Tri-state capable outputs
Power-Down Control Whole-chip power-down control
Bus Interface CMOS
بسته‌بندی 16-pin TSSOP, 4.40 mm width
نوع نصب Surface mount
Packaging Form Tube

راهنمای پیکربندی پین ICS548G-05 16-pin tssop, 4.40 mm width

پیکربندی پین برای ICS548G-05 (پکیج 16-pin tssop, 4.40 mm width). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16-pin tssop, 4.40 mm width برای ICS548G-05

داده پین‌آوت تفصیلی موجود نیست برای ICS548G-05.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ICS548G-05 مناسب است برای 6 کاربردs: Digital Audio Sampling Clock, MP3 Player Timing, T1 and E1 Communications Timing, Precision Clock-Distribution Tree, Industrial Control and Instrumentation, Interface and Processor Clocking.

🎧

Digital Audio Sampling Clock

The ICS548G-05 fits digital-audio clock generation because it synthesizes x16 and x24 clocks from T1 and E1-related reference frequencies and is associated with a 49.152 MHz output. Place it upstream of an audio converter or digital audio interface, and derive the required sampling clock from a common crystal reference. The low-jitter PLL architecture helps preserve signal-chain timing quality, while the 3.15 V to 5.5 V supply range supports both 3.3 V and 5 V systems. Validate the output frequency, reference tolerance, and jitter against the receiving converter before release.

📱

MP3 Player Timing

ICS548G-05 was designed to produce audio sampling rates used in MP3 systems, making it appropriate for compact digital players and portable media electronics. A single crystal reference can feed the PLL, which generates the required multiplied clock instead of requiring several unrelated oscillators. This reduces clock-source count and supports a coordinated distribution network for the codec, memory interface, and signal-conversion stages. Keep the reference path short, provide local supply decoupling, and route the synthesized clock directly toward the codec clock input.

🌐

T1 and E1 Communications Timing

The ICS548G-05 is designed to derive x16 and x24 clock outputs from T1 and E1 frequencies, making it suitable for communications equipment requiring related clocks from a common reference. Its analog/digital PLL architecture accepts either a crystal or an external clock and generates the desired timing frequencies. In a line-card or transport design, distribute the synthesized outputs with controlled impedance and equalize loading where multiple branches are required. Verify PLL lock behavior and reference stability under operating temperature.

🖥️

Precision Clock-Distribution Tree

ICS548G-05 can form the synthesis stage of a small clock tree because it provides CLK and CLK/2 outputs in a compact 16-TSSOP package. Its documented 500 ps output skew supports closely related edges when feeding compatible logic. The device can replace separate oscillator and divider arrangements where x16 and x24 multiples are needed from one reference. Keep fanout within the electrical limits, avoid long unterminated branches, and provide separate clock routing for each destination to minimize edge degradation.

🏭

Industrial Control and Instrumentation

The ICS548G-05 can supply common synthesized clocks to industrial control, test, and measurement boards that need multiple related frequencies rather than one fixed oscillator output. The 3.15 V to 5.5 V operating range supports common embedded control rails, while the TSSOP package simplifies board-level assembly. Use a low-noise reference, isolate the PLL from switching regulators and high-current traces, and provide adequate ground-plane continuity. Confirm startup, lock, and output behavior across the complete industrial temperature range before deployment.

🔧

Interface and Processor Clocking

ICS548G-05 is useful in processor-based designs where one reference must feed multiple related clock domains. The PLL-derived x16 and x24 outputs can support digital interfaces, converters, and peripheral timing while reducing the number of separate oscillators. Place the device near the reference source, route the high-speed outputs as controlled-impedance nets, and avoid introducing test pads or long stubs on sensitive clock paths. Validate setup and hold timing at each receiver because PCB skew is added to the device's specified output skew.

What is the ICS548G-05 clock synthesizer used for?
The ICS548G-05 is a low-jitter PLL clock synthesizer used to generate x16 and x24 clock outputs from T1 and E1 reference frequencies. According to the Renesas Electronics manufacturer datasheet, it accepts a crystal or clock input and synthesizes communications-related frequencies. A listed 49.152 MHz configuration makes the device particularly relevant to digital-audio sampling clocks, communications timing, and clock trees requiring related outputs from one reference.
What are the key specifications of ICS548G-05 that engineers should know?
The ICS548G-05 combines a 3.15 V to 5.5 V supply range, a 2.05 MHz input frequency, x16 and x24 synthesis functions, and a listed 49.152 MHz output in a 16-pin TSSOP package. The manufacturer identifies the part as a low-cost, low-jitter clock synthesizer using analog/digital PLL techniques. Public device information also identifies CLK and CLK/2 outputs, tri-state capability, and 500 ps clock skew.
Where can I download the ICS548G-05 datasheet PDF?
The official ICS548G-05 datasheet is available through the Renesas Electronics 548-05 datasheet page at https://www.renesas.com/en/document/dst/548-05-datasheet. Use the manufacturer document for the authoritative electrical characteristics, reference configuration, PLL operating information, and exact pin descriptions. The product is also indexed as ICS548-05 because the G-05 ordering suffix identifies the package and delivery configuration.
Where can I find the ICS548G-05 pinout?
Use the pin-description table in the Renesas Electronics ICS548-05 manufacturer datasheet to assign pins on the 16-pin TSSOP footprint. The public product description confirms a 16-pin TSSOP package but does not expose a complete, reliably indexed pin table on the product page. Confirm pin numbers, power connections, reference input, control functions, and clock-output assignments directly in the datasheet before laying out or modifying a PCB.
Is ICS548G-05 suitable for digital-audio and MP3 clocking?
Yes, ICS548G-05 is suitable for digital-audio clock generation because it synthesizes x16 and x24 clocks from T1 and E1-related reference frequencies and has a listed 49.152 MHz configuration. The manufacturer specifically describes the device as suitable for producing audio sampling rates used in MP3 systems. The clock must still be qualified against the target converter's jitter, reference, and operating-mode requirements.
What is the difference between ICS548G-05 and ICS548G-05I?
The ICS548G-05 and ICS548G-05I are ordering variants of the same 16-TSSOP clock-synthesizer family and are identified as pin-compatible in Renesas cross-reference information. Their clock synthesis functions remain centered on x16 and x24 multiplication from T1 and E1 frequencies. The suffix denotes a qualification or temperature-grade distinction, so engineers should compare the ordering table and temperature limits in the manufacturer datasheet before substitution.
Can ICS548G-05I replace ICS548G-05 in an existing design?
ICS548G-05I can be considered a pin-compatible replacement for ICS548G-05 because both use the 16-TSSOP package and belong to the same ICS548-05 family. Their core PLL synthesis function and electrical operating range remain aligned. Before approving the substitution, verify the suffix-specific temperature grade, qualification class, lifecycle status, and ordering details, then review the manufacturer pin and characteristic tables for any grade-dependent limits.
What is the best drop-in replacement for ICS548G-05?
The best-supported drop-in candidates are ICS548G-05I, ICS548G-05C, and ICS548G-05LF because each is associated with the same 16-TSSOP T1/E1 clock-multiplier family and retains the core x16 and x24 PLL function. No verified cross-brand equivalent was established with a matching footprint and pin assignment. Use the family ordering table to select the suffix according to temperature grade, qualification, termination, and lifecycle requirements.
What can replace ICS548G-05 on the same PCB?
ICS548G-05I, ICS548G-05C, and ICS548G-05LF are the documented same-brand options for replacing ICS548G-05 without changing its 16-TSSOP land pattern. Their relevant synthesis functions and supply range align with the original device, while the suffix changes the ordering grade or configuration. Confirm the manufacturer pin table, reference requirements, operating-temperature limits, and lifecycle status before committing a replacement to production.
Is ICS548G-05 the same as 548G-05LF?
The 548G-05LF and ICS548G-05LF entries represent the same lead-free 16-TSSOP ICS548-05 family configuration under shortened and full ordering formats. Both are associated with a T1/E1 clock multiplier and are listed in the same package class. The exact purchasing suffix should still be checked against the manufacturer ordering table to confirm grade, termination, and lifecycle requirements.
What is the best Renesas Electronics equivalent for ICS548G-05?
ICS548G-05I is the closest Renesas Electronics ordering alternative when a same-brand substitute is required, because it retains the 16-TSSOP footprint and ICS548-05 PLL clock-synthesizer architecture. ICS548G-05C and ICS548G-05LF are additional suffix-specific options. No verified Renesas cross-brand or competing-manufacturer part was found with a confirmed pin-to-pin match, so the family ordering table is the appropriate basis for final selection.
When should I choose ICS548G-05 instead of a fixed-frequency oscillator?
Choose ICS548G-05 when the design needs PLL-synthesized x16 and x24 communications clocks derived from a common crystal or clock reference. A fixed-frequency oscillator is simpler when only one predetermined frequency is required and no synchronized related outputs are needed. The ICS548G-05 trades a simpler architecture for flexible frequency generation, multiple clock outputs, and a 49.152 MHz audio-clock use case.
How should the reference clock and power circuitry be designed for ICS548G-05?
Connect the crystal or clock input according to the reference schematic in the Renesas Electronics manufacturer datasheet, and place the associated components close to the device. Supply the device within its 3.15 V to 5.5 V operating range and provide local decoupling on the power pins. Because PLL performance depends on reference stability and loop behavior, minimize trace length, maintain a clean ground return, and avoid routing sensitive reference and clock nets through noisy switch-node areas.
How much clock skew does ICS548G-05 provide?
The ICS548G-05 provides 500 ps low skew on the CLK and CLK/2 outputs according to the indexed device description. This low-skew characteristic is useful when receiving circuitry must observe closely related clock edges. It does not remove all design sensitivity: loading, PCB propagation delay, source termination, and output enable sequencing still need to be considered when distributing clocks across a board.
Where can I request a quote and current lead time for ICS548G-05?
Use the Request a Quote form on this page to request current availability, price, minimum order quantity, and lead time for ICS548G-05. Because this is an older clock-synthesizer family, its lifecycle status and inventory can vary by package and ordering suffix. State the exact suffix, tube or reel preference, annual usage, and required qualification grade in the request to avoid ambiguity.

داده‌های مرجع مهندسی برای ICS548G-05 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ICS548G-05 when the design requires x16 and x24 PLL-derived clocks from a common T1 or E1-related reference and includes audio-clock or communications-clock functions. It is particularly appropriate when a listed 49.152 MHz output, multiple related clock outputs, low-jitter operation, and a 3.15 V to 5.5 V supply are important. Select ICS548G-05I when its ordering grade matches the required environmental or qualification conditions, and consider ICS548G-05C when its grade is appropriate. Use ICS548G-05LF or 548G-05LF for the documented lead-free family configuration. All four listed options retain the TSSOP-16 footprint, making them candidates for existing-board substitution. Do not choose them solely by suffix: verify temperature grade, qualification, reference requirements, lifecycle status, and electrical limits in the manufacturer ordering information.

مقایسه با جایگزین‌ها

پارامتر این محصول ICS548G-05I ICS548G-05C ICS548G-05LF 548G-05LF
Package TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Device Function PLL clock synthesizer and T1/E1 frequency multiplier PLL clock synthesizer and T1/E1 frequency multiplier PLL clock synthesizer and T1/E1 frequency multiplier PLL clock synthesizer and T1/E1 frequency multiplier PLL clock synthesizer and T1/E1 frequency multiplier
Listed Output Frequency 49.152 MHz 49.152 MHz 49.152 MHz 49.152 MHz 49.152 MHz
Supply Voltage Range 3.15 V to 5.5 V 3.15 V to 5.5 V 3.15 V to 5.5 V 3.15 V to 5.5 V 3.15 V to 5.5 V
Input Frequency 2.05 MHz 2.05 MHz 2.05 MHz 2.05 MHz 2.05 MHz
Synthesis Functions x16 and x24 x16 and x24 x16 and x24 x16 and x24 x16 and x24
Clock Skew 500 ps 500 ps 500 ps 500 ps 500 ps
Output States CLK and CLK/2 with tri-state capability CLK and CLK/2 with tri-state capability CLK and CLK/2 with tri-state capability CLK and CLK/2 with tri-state capability CLK and CLK/2 with tri-state capability
Qualification or Ordering Suffix G-05 I ordering suffix C ordering suffix LF ordering suffix Shortened LF ordering code

تفاوت‌های کلیدی

  • PLL synthesis replaces separate oscillator and divider arrangements (در مقابلICS548G-05I)
  • Compact multi-output timing in a standard TSSOP footprint (در مقابلICS548G-05C)
  • Lead-free ordering configuration is available without changing the land pattern (در مقابل548G-05LF)

یادداشت‌های طراحی

Place the crystal or clock-reference components close to the ICS548G-05 and keep the reference path short and compact. Use a continuous ground plane beneath the device and avoid routing the reference net near switching nodes, high-current inductors, and isolation barriers. A stable reference reduces phase errors in the PLL. When the input comes from an external oscillator, verify amplitude, duty cycle, and edge rate against the manufacturer electrical-characteristics table before layout approval.

Treat CLK and CLK/2 as high-speed signals even though the device produces relatively low-frequency audio and communications clocks. Use short traces, minimize stubs, avoid test pads where practical, and maintain consistent return paths beneath the clock nets. If a clock is branched, account for the capacitance and loading of each receiver. The documented 500 ps output skew applies to the device outputs, while additional PCB and receiver skew must be included in end-to-end timing analysis.

Decouple the 3.15 V to 5.5 V supply locally at the device and keep the power loop compact. Place the decoupling capacitor between the relevant power and ground pins, provide a low-impedance ground connection, and route clock outputs away from the supply return path of switching circuitry. Startup and power-down sequencing should follow the manufacturer application guidance. If outputs are tri-stated during reset or power transitions, verify that downstream receivers tolerate an undefined or high-impedance clock state.

Do not substitute the ICS548G-05 for a generic frequency divider solely because both produce clocks; the device uses PLL synthesis and has a defined reference and mode configuration. Check the ordering suffix, package, supply range, reference frequency, output frequency, and grade-specific limits before replacing a component. Also avoid assuming that the 49.152 MHz headline value is the only available output configuration. Use the device's mode and frequency tables when configuring x16 and x24 synthesis.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The LF ordering suffix identifies a lead-free configuration, but formal RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 declarations are not stated on the manufacturer page. Confirm current declarations with Renesas Electronics.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ICS548G-05 datasheet ICS548G-05 pinout ICS548G-05 datasheet pdf Renesas ICS548G-05 ICS548G-05 equivalent ICS548G-05 replacement ICS548G-05 cross reference ICS548G-05 TSSOP-16 pinout ICS548G-05 49.152MHz clock ICS548G-05 audio sampling clock ICS548G-05 vs ICS548G-05I ICS548G-05 price ICS548G-05 stock ICS548G-05 application circuit

قطعات و اصطلاحات مرتبط

Renesas Electronics ICS548G-05 ICS548-05 ICS548G-05I ICS548G-05C ICS548G-05LF 548G-05LF PLL clock synthesizer phase-locked loop frequency multiplier clock generator clock buffer clock and timing IC T1 clock E1 clock audio sampling-rate generator 49.152 MHz 2.05 MHz 500 ps clock skew TSSOP-16 TSSOP package family surface-mount package CMOS tri-state output T1/E1 communications timing
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ