Texas Instruments

INA118UG4 - 800 kHz Low-Power Instrumentation Amplifier | Texas Instruments

MPN: INA118UG4 ✓ فعال
25 uV Vdss 8-SOIC Package
حداقل سفارش: 1 |

INA118UG4 نمای کلی

The Texas Instruments INA118UG4 is a precision, low-power instrumentation amplifier with 800 kHz bandwidth, 25 uV offset voltage, and 98 dB common-mode rejection in an 8-SOIC package. Designed for differential measurements, it accepts bipolar inputs while providing stable gain from 1 to 10,000 using one external resistor. The device is suitable for sensor, medical, and industrial signal-conditioning systems where low offset, high common-mode rejection, and compact packaging are important.

An instrumentation amplifier is a differential amplifier optimized for amplifying a small voltage difference between two inputs while rejecting signals common to both inputs. Its hierarchy includes instrumentation amplifier, differential amplifier, analog amplifier, and integrated circuit. This application-specific architecture is more useful than a general-purpose op amp when the source is a low-level bridge, strain gauge, thermocouple, or current-sense element surrounded by substantial common-mode voltage.

Key features include a three-op-amp internal architecture, current-feedback input circuitry, 800 kHz bandwidth, 25 uV input offset voltage, and 98 dB CMRR. A single external resistor establishes gains from 1 to 10,000, simplifying circuit configuration while retaining the internal resistor matching needed for accurate differential gain. The low-power design also supports portable and compact measurement systems that cannot accommodate a large analog signal chain.

The current-feedback input stage preserves useful bandwidth at high closed-loop gain. According to the Texas Instruments INA118 product information, bandwidth remains 70 kHz at a gain of 100, an important consideration for systems that must preserve sensor-response speed without operating at unity gain. Supply operation from ±1.35 V to ±18 V permits use in both compact dual-rail systems and conventional analog power rails up to ±15 V typical.

Typical applications include bridge-based pressure and load-cell measurement, low-voltage current sensing, isolated sensor interfaces, biomedical instrumentation, and industrial process monitoring. INA118UG4 is particularly appropriate when differential signal integrity matters more than absolute accuracy at low cost, because its internal three-op-amp design provides matched gain resistors and high common-mode rejection in one package.

Designers should verify common-mode input range, output swing, supply polarity, and gain-bandwidth requirements at the actual operating voltage. A precision gain resistor, stable reference potential, and careful grounding of the reference and supply-return pins are important for low-offset measurements. Decoupling capacitors should be placed close to the supply pins using a layout that minimizes sensitive input-node coupling.

This product page consolidates the INA118UG4 electrical characteristics, family replacements, application guidance, and practical design considerations into an engineering-focused selection resource. It also distinguishes direct family drop-ins from broader functional alternatives so designers can reuse a PCB only after verifying package dimensions, pinout, supply range, and gain-setting behavior.

جایگزین‌های drop-in برای INA118UG4 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای INA118UG4 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Gain Range, Input Offset Voltage, Number of Circuits, Operating Temperature Range.

Texas Instruments
Package: 8-pin SOIC (0.154 inch, 3.90 mm width)
Input Offset Voltage: 50 μV
Operating Temperature Range: -40 °C to +85 °C
مقایسه با INA118UG4 →
Texas Instruments
Package: 8-SOIC (0.154 in, 3.90 mm Width)
Gain Range: 1 V/V to 10000 V/V, set by single external resistor
Number of Circuits: 1
مقایسه با INA118UG4 →
Texas Instruments
Package: 8-pin SOIC, 3.90 mm width
Gain Range: Approximately 1 to 10,000
Input Offset Voltage: 50 µV
مقایسه با INA118UG4 →

INA118U

✅ جایگزین مستقیم
Texas Instruments
📦 8-SOIC
Precision, low-power instrumentation amplifier · 1 circuit · 100 · 800 kHz · ±2.25 V · 350 μA · 50 μV · 0.5 μV/°C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

INA118UB

✅ جایگزین مستقیم
Texas Instruments
📦 8-SOIC
Instrumentation Amplifier · 1 · 800 kHz (G = 1) · 0.09 V/us · 50 uV · 1.35 V to 18 V (per rail) · 1 V/V to 10000 V/V, set by single external resistor · -40C to +85C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

INA118UBG4

✅ جایگزین مستقیم
Texas Instruments
📦 8-SOIC
Precision instrumentation amplifier · Texas Instruments · 3 internal amplifiers · 50 µV · 800 kHz · Single-ended · Approximately 1 to 10,000

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

INA118UA

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-SOIC
Same INA118 family and 8-SOIC package; core gain range remains 1 to 10,000 (0% range difference), with grade and ordering details to be confirmed

📋 جایگزین مرجع (خارج از کاتالوگ)

INA118UG4 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Precision low-power instrumentation amplifier
Number of Circuits 1 circuit
Amplifier Architecture Three-op-amp architecture
Small-Signal Bandwidth 800 kHz
Bandwidth at Gain 100 70 kHz
Input Offset Voltage 25 uV
Common-Mode Rejection Ratio 98 dB
Gain Range 1 to 10,000
Gain Configuration One external resistor
Input Circuitry Current-feedback
Minimum Total Supply Voltage ±1.35 V
Typical Dual Supply Voltage ±15 V
Maximum Total Supply Voltage ±18 V
Minimum Operating Temperature -40 °C
بسته‌بندی 8-SOIC
Package Width 3.90 mm
Package Pitch 1.27 mm

پیکربندی پین INA118UG4

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پین 1 RG — External gain resistor connection
پین 2 IN- — Inverting input
پین 3 IN+ — Noninverting input
پین 4 V- — Negative supply connection
پین 5 REF — Reference input
پین 6 OUT — Amplified output
پین 7 V+ — Positive supply connection
پین 8 RG — External gain resistor connection

کاربردهای معمول

INA118UG4 مناسب است برای 6 کاربردs: Strain-Gauge Bridge Measurement, Precision Current Sensing, Medical and Biosignal Front Ends, Thermocouple Measurement, Industrial Process Sensing, Portable Instrumentation.

🏭

Strain-Gauge Bridge Measurement

The INA118UG4 fits strain-gauge and load-cell front ends that produce a small differential signal on a substantial common-mode voltage. Its 25 uV input offset and 98 dB CMRR help preserve the integrity of the bridge output, while the three-op-amp architecture provides matched gain resistors in an 8-SOIC package. One external resistor sets gain from 1 to 10,000, simplifying range adjustment. For slowly varying loads, use the full 800 kHz device bandwidth only when necessary, and verify the bridge excitation voltage, common-mode range, and output swing before fixing the gain.

⚡

Precision Current Sensing

The INA118UG4 is appropriate for low-side or isolated current-sense circuits where a small differential voltage must be amplified in the presence of a larger common-mode voltage. A 25 uV offset is useful near the measurement floor, and 98 dB CMRR suppresses supply and ground disturbances that appear equally on both inputs. The 8-SOIC package reduces board area, while the 1-to-10,000 gain range supports both millivolt and sub-millivolt sense elements. Confirm that the shunt common-mode voltage remains inside the amplifier limits and that the amplified output does not saturate the supply rails.

💊

Medical and Biosignal Front Ends

The INA118UG4 can condition low-level differential bio-sensor signals when the design requires better common-mode rejection than a general-purpose op-amp network provides. Its 98 dB CMRR reduces interference from physiological excitation or shared ground paths, and the 25 uV offset supports high-gain measurement stages. The single-resistor gain setting from 1 to 10,000 makes it practical to match the input range to a sensor interface. Medical designs must additionally address patient protection, isolation, leakage current, electrode compliance, and applicable safety requirements outside the device's basic analog specifications.

🌐

Thermocouple Measurement

The INA118UG4 is suitable for precision thermocouple interfaces because the thermocouple produces a low-level differential voltage and the amplifier offers 25 uV offset with 98 dB CMRR. An external gain resistor allows the circuit to cover different thermocouple sensitivities, while the 8-SOIC package supports compact multi-channel measurement boards. The principal design constraints are cold-junction compensation, input protection, wiring error, and thermoelectric leakage. Verify the common-mode voltage during startup and ensure the selected gain does not saturate the output while the thermocouple is disconnected or exposed to temperature extremes.

🏭

Industrial Process Sensing

The INA118UG4 supports industrial process-measurement modules that combine a low-level sensor with controller-based data acquisition. The 98 dB CMRR is useful when sensor wiring introduces common-mode pickup, and the three-op-amp architecture reduces the need for separate precision gain networks. With gain adjustable from 1 to 10,000 and bandwidth up to 800 kHz, the device accommodates slow process variables and faster dynamic sensors. Protect the input path from industrial transients, isolate analog ground currents carefully, and confirm that the operating-temperature grade and lifecycle status satisfy the deployment environment.

📱

Portable Instrumentation

The INA118UG4 suits portable measurement equipment where a three-op-amp instrumentation amplifier must occupy little board area without relying on discrete precision networks. The 8-SOIC package, single external gain resistor, and 25 uV offset support compact sensor interfaces, while 98 dB CMRR helps reject interference from nearby digital and switching circuitry. Low-power operation also makes the device relevant to battery-powered instruments. Battery life still depends on total supply current, regulator efficiency, duty cycle, and the selected gain, so evaluate those parameters at system level rather than inferring consumption from the amplifier's bandwidth alone.

What are the key specifications of INA118UG4 that engineers should know?
The INA118UG4 is a one-channel instrumentation amplifier with 800 kHz bandwidth, 25 uV input offset voltage, 98 dB CMRR, and externally adjustable gain from 1 to 10,000. It uses a three-op-amp architecture with current-feedback input circuitry, operates from ±1.35 V to ±18 V, and is packaged in an 8-SOIC. According to the Texas Instruments INA118 product information, bandwidth remains 70 kHz at gain 100, making the device suitable for precision differential signal conditioning.
Where can I download the INA118UG4 datasheet PDF?
The official INA118UG4 technical information is available through the Texas Instruments INA118 product page at https://www.ti.com/product/INA118. The product page links ordering information, parameters, quality data, and supporting documents for the INA118 family. The INA118UG4 ordering code identifies the 8-SOIC device covered by that family documentation. Review the pin-description table and electrical characteristics for the exact operating conditions before finalizing a design.
Where can I find the INA118UG4 pinout and package drawing?
The INA118UG4 uses an 8-SOIC package with pins assigned to the two differential inputs, gain-setting resistor, reference, output, and supply connections. Use the manufacturer pin-description table and package drawing in the Texas Instruments INA118 documentation when assigning PCB tracks. The distributor product listing confirms an 8-SOIC package, while the package width is listed as 3.90 mm. Always follow the pin-number sequence and exposed-lead geometry shown in the manufacturer drawing.
What is the supply voltage range of INA118UG4?
The INA118UG4 operates from ±1.35 V to ±18 V, corresponding to a 2.7 V to 36 V total supply span. The device also supports a typical dual supply of ±15 V. According to the Texas Instruments INA118 family information, the minimum ±1.35 V operating condition enables low-voltage instrumentation systems, while the ±18 V maximum accommodates conventional higher-voltage analog rails. Actual signal swing and output range remain dependent on the selected supply and gain.
How is the gain of INA118UG4 set?
The INA118UG4 sets gain with one external resistor, supporting a programmable range from 1 to 10,000. This arrangement simplifies adjustment while the matched internal gain resistors establish the ratio needed for accurate differential amplification. According to the Texas Instruments INA118 product information, a single external resistor selects any gain from 1 to 10,000. Select a low-noise, low-tolerance resistor and account for its tolerance and temperature coefficient when setting precision measurement gains.
What is the bandwidth of INA118UG4 at high gain?
The INA118UG4 has 800 kHz small-signal bandwidth, and the Texas Instruments INA118 family maintains 70 kHz bandwidth at a gain of 100. Its current-feedback input circuitry supports useful bandwidth at elevated closed-loop gains, unlike a simple bandwidth-versus-gain trade-off. This behavior is valuable for dynamic sensor systems that require amplification without reducing signal bandwidth to a single fixed frequency. Verify the closed-loop response and output-swing requirements at the intended gain and supply.
What is the difference between INA118UG4 and INA118U?
The INA118UG4 and INA118U belong to the same INA118 family and share the 8-SOIC package and core instrumentation-amplifier function. Their distinguishing information lies in the ordering and qualification details rather than a change to the basic gain architecture. Both use one external resistor for gains from 1 to 10,000. Before substitution, compare the exact ordering table, temperature grade, packaging code, and lifecycle status in the Texas Instruments documentation for each suffix.
Is INA118UG4 the same as INA118UBG4?
The INA118UG4 and INA118UBG4 are members of the same INA118 instrumentation-amplifier family and use the same 8-SOIC package, but their suffix codes identify different ordering options. The comparison pages identify INA118UBG4 as a related family member; exact electrical and qualification differences must be taken from the manufacturer ordering table. Because the package and functional architecture match, INA118UBG4 is a candidate for drop-in evaluation, subject to checking gain resistor requirements, temperature grade, and qualification.
When should I choose INA118UG4 over another instrumentation amplifier?
Choose INA118UG4 when the design needs a compact, low-power, single-channel differential amplifier with 25 uV offset, 98 dB CMRR, and gain adjustable from 1 to 10,000 using one resistor. Its three-op-amp architecture and current-feedback inputs are appropriate for bridge sensors and low-level industrial signals. Select another device when the application requires a different package, wider supply range, rail-to-rail input or output operation, integrated excitation, or another manufacturer-specific qualification.
Is INA118UG4 suitable for strain-gauge and bridge-sensor measurement?
The INA118UG4 is suitable for bridge-sensor measurement because its 25 uV offset and 98 dB CMRR support accurate extraction of small differential bridge outputs in the presence of common-mode voltage. A single external resistor establishes the gain, and the 800 kHz bandwidth accommodates sensors faster than static load cells. Texas Instruments identifies the INA118 as a general-purpose low-power instrumentation amplifier. The bridge excitation source, grounding, output range, and gain must still be evaluated together.
What can replace INA118UG4 without changing the PCB?
The strongest PCB-compatible candidates are other 8-SOIC members of the Texas Instruments INA118 family, including INA118U, INA118UB, and INA118UBG4. They retain the instrumentation-amplifier architecture and require review of the manufacturer pinout and gain-setting method. Cross-brand equivalents are not established by the available family comparison information, so they should not be treated as drop-ins without a documented footprint and pinout check. Confirm the exact suffix requirements before replacing the part.
What is the best Texas Instruments equivalent for INA118UG4?
INA118U is the closest straightforward Texas Instruments family equivalent identified for a PCB-reuse decision because it is an INA118 variant in the same 8-SOIC package. INA118UB and INA118UBG4 are additional family candidates, but their qualification and ordering details should be compared with the target requirements. According to the Texas Instruments INA118 family documentation, all members use a single external gain resistor. Verify exact temperature, packaging, and qualification suffixes before releasing a substitution.
Where can I buy INA118UG4 and check current lead time?
Use the Request a Quote form on this page to request current INA118UG4 availability, lead time, and a quotation for the exact 8-SOIC ordering code. The current commercial terms should be confirmed at the time of inquiry because inventory and lead time can change. The manufacturer product page is the appropriate starting point for lifecycle and ordering documentation. Provide the required quantity, delivery location, and date code requirement in the quote request.
What is the price of INA118UG4?
The current INA118UG4 quotation is available through the Request a Quote form on this page. Pricing depends on quantity, date-code requirement, packaging, market conditions, and fulfillment terms, so a static figure can quickly become obsolete. Submit the required order quantity and any traceability requirements with the request for a current quote. The exact orderable manufacturer part number is INA118UG4.
Is INA118UG4 in stock?
Current INA118UG4 stock status should be confirmed through the Request a Quote form on this page. The Request a Quote workflow is used for quote-first electronic component sourcing and can reflect the requested quantity and date-code constraints more accurately than a generic listing. Include the required quantity, delivery date, and acceptable date code in the request. Do not base a production schedule on a search-result availability statement alone.
What is the lead time for INA118UG4?
Request the current INA118UG4 lead time through the Request a Quote form on this page and include your required quantity, delivery date, and traceability requirements. Lead time can vary with order size, inventory, and date-code constraints, so it should be treated as a quote-dependent commercial condition. The Texas Instruments product page supports lifecycle and ordering review, while the quotation form provides the appropriate channel for current scheduling information.
Does INA118UG4 meet RoHS and automotive qualification requirements?
The INA118UG4 page information does not establish a specific RoHS, REACH, or AEC-Q100 status for this exact ordering code, so those attributes should remain unconfirmed until checked in the manufacturer compliance documentation. AEC-Q100 qualification is especially important for automotive use and should not be inferred from an industrial temperature rating. Use the Texas Instruments product page and its compliance documents, or request supporting documentation through the quote process, before making a compliance claim.

داده‌های مرجع مهندسی برای INA118UG4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose INA118UG4 when the design needs a single-channel, low-power instrumentation amplifier with 25 uV offset, 98 dB CMRR, one-resistor gain control, and an 8-SOIC footprint. It is a strong fit for bridge sensors, current shunts, thermocouples, and low-level industrial or biomedical signals. INA118U is the closest straightforward same-family option when its ordering and qualification details match the design. Consider INA118UB or INA118UBG4 only after checking their exact suffix-specific requirements against the INA118UG4 ordering table. The shared family architecture and package make PCB reuse plausible, but temperature grade, qualification, and orderable packaging still require verification. Choose a different instrumentation amplifier if the design requires rail-to-rail inputs or outputs, a larger supply range, integrated bridge excitation, or a different footprint.

مقایسه با جایگزین‌ها

پارامتر این محصول INA118U INA118UB INA118UBG4 INA118UA
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same 8-SOIC - same
Product Type Precision low-power instrumentation amplifier Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier
Gain Range 1 to 10,000 1 to 10,000 1 to 10,000 1 to 10,000 1 to 10,000
Architecture Three-op-amp with current-feedback inputs INA118 family architecture INA118 family architecture INA118 family architecture INA118 family architecture

تفاوت‌های کلیدی

  • Compact complete differential gain stage (در مقابلINA118U)
  • High common-mode rejection for differential sensing (در مقابلINA118UBG4)
  • Useful bandwidth at elevated gain (در مقابلINA118UB)

یادداشت‌های طراحی

Route the IN- and IN+ connections as a compact, symmetric differential pair and keep them away from switching nodes, relay contacts, and high-current return paths. Place the external gain resistor close to the RG pins, and connect the REF bypass capacitor directly to the reference pin with a short ground return. The differential inputs are high-impedance nodes, so leaked PCB contamination or flux residue can create an offset larger than the 25 uV input specification.

Check the actual input common-mode voltage and output swing against the selected supply rails; the ±1.35 V to ±18 V operating range does not imply rail-to-rail input or output behavior. Use a quiet, low-noise supply for sensitive measurements and place supply-decoupling capacitors close to V+ and V-. If a regulated supply introduces ripple, verify its attenuation at the selected gain rather than assuming that the 98 dB CMRR specification alone removes all in-band noise.

A common design mistake is treating the INA118 as a unity-gain op amp and ignoring the relationship among external gain resistance, gain, bandwidth, and output range. Gain is set by one resistor, but the selected resistor must match the intended gain and remain stable over temperature. Also ground the REF pin appropriately rather than leaving it floating. Verify the exact package lead geometry and pin numbering against the manufacturer drawing before releasing PCB artwork.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Exact-order compliance attributes were not established by the listed product and comparison pages. Check the Texas Instruments product documentation and applicable material declarations before making a compliance claim.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

INA118UG4 datasheet INA118UG4 datasheet pdf INA118UG4 pinout INA118UG4 800 kHz bandwidth INA118UG4 25 uV offset INA118UG4 98 dB CMRR INA118UG4 drop-in replacement INA118UG4 equivalent amplifier INA118UG4 vs INA118U INA118UG4 8-SOIC footprint INA118UG4 strain gauge amplifier INA118UG4 current sense amplifier Texas Instruments INA118UG4 INA118UG4 price INA118UG4 stock

قطعات و اصطلاحات مرتبط

Texas Instruments INA118UG4 INA118 INA118U INA118UB INA118UBG4 INA118UA instrumentation amplifier differential amplifier analog amplifier integrated circuit three-op-amp architecture current-feedback input common-mode rejection ratio CMRR input offset voltage gain resistor 8-SOIC SOIC package family surface-mount package strain gauge load cell current shunt thermocouple industrial process measurement
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ