Texas Instruments

INA133UA/2K5 - 1.5MHz Difference Amplifier | Texas Instruments

MPN: INA133UA/2K5 ✓ فعال
450 µV Vdss 8-pin SOIC (D) Package
حداقل سفارش: 1 |

INA133UA/2K5 نمای کلی

The Texas Instruments INA133UA/2K5 is a precision differential amplifier with a 1.5 MHz bandwidth, 450 µV input offset voltage, and 0.95 mA power consumption, housed in an 8-pin SOIC package. Its integrated precision resistor network supports accurate differential measurement while maintaining common-mode rejection and gain stability over temperature.

A difference amplifier is a specialized amplifier IC that subtracts two input voltages and amplifies the resulting differential signal. This category belongs to the wider amplifier hierarchy and is used to reject common-mode noise, monitor differential sensor outputs, and measure small voltage changes across high-potential or low-noise systems. The INA133 combines an internal amplifier with a trimmed resistor network to simplify high-accuracy gain configurations.

Principal features include a 1.5 MHz gain-bandwidth product, 450 µV offset specification, and very low 0.95 mA power draw. The /2K5 ordering option identifies the specified differential amplifier configuration, while the UA package designation provides an 8-pin SOIC implementation. These characteristics make the device useful where signal speed and low power must coexist with precision differential input handling.

The INA133 architecture uses laser-trimmed on-chip resistors with low temperature-coefficient tracking. This construction supports accurate gain and common-mode rejection across operating-temperature changes while eliminating the need for a discrete four-resistor subtraction network. Its bandwidth allows the amplifier to process signals beyond static bridge or sensor measurements, although practical usable frequency and accuracy also depend on source impedance, layout, and the required closed-loop response.

Typical applications include current-shunt monitoring, bridge-sensor signal conditioning, precision differential measurement, industrial instrumentation, and low-power sensor interfaces. The amplifier can also serve as the input stage for filtering, control, or conversion circuitry when its bandwidth, offset, supply range, and common-mode performance suit the signal chain.

When laying out the circuit, keep the differential input traces short, symmetric, and away from switching nodes. Resistor networks used to set input and output limits should be placed close to their associated pins, and bypass capacitance should follow the manufacturer’s recommended application circuit. Check input and output swing, common-mode range, and supply limits before adding gain.

This product page consolidates the manufacturer’s principal INA133 specifications with engineering guidance for differential measurement. It also organizes same-package alternatives, design considerations, application fit, and parameter comparisons so engineers can evaluate the INA133UA/2K5 against other precision amplifier implementations before laying out a board.

جایگزین‌های drop-in برای INA133UA/2K5 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

INA133UA/2K5E4

✅ جایگزین مستقیم
📦 8-pin SOIC (D)
Same INA133UA/2K5 electrical configuration and 8-pin SOIC footprint; E4 identifies a distinct ordering or qualification treatment.

📋 جایگزین مرجع (خارج از کاتالوگ)

INA133U/2K5E4

✅ جایگزین مستقیم
📦 8-pin SOIC (D)
Same 1.5 MHz INA133 architecture and 8-pin SOIC footprint; the U versus UA ordering suffix may change package or temperature treatment.

📋 جایگزین مرجع (خارج از کاتالوگ)

INA133U/2K5

✅ جایگزین مستقیم
📦 8-pin SOIC (D)
Same 1.5 MHz INA133 electrical family and 8-pin SOIC footprint; the U ordering suffix requires verification against the UA package and grade details.

📋 جایگزین مرجع (خارج از کاتالوگ)

INA133UA/2K5.A

✅ جایگزین مستقیم
📦 8-pin SOIC (D)
Same INA133UA/2K5 function and 8-pin SOIC footprint; the trailing A denotes a distinct ordering designation that requires qualification review.

📋 جایگزین مرجع (خارج از کاتالوگ)

INA133UA/2K5 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Precision difference amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 1.5 MHz
Input Offset Voltage 450 µV
Power Consumption 0.95 mA
بسته‌بندی 8-pin SOIC (D)
تعداد پین‌ها 8 pins
ولتاژ تغذیه ±18 V maximum, 36 V total maximum
محدوده دمای کاری -55 °C to +125 °C
Input Configuration Differential input
پیکربندی خروجی Differential output
Integrated Resistor Network Laser-trimmed on-chip precision resistor network

راهنمای پیکربندی پین INA133UA/2K5 8-pin soic (d)

پیکربندی پین برای INA133UA/2K5 (پکیج 8-pin soic (d)). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin soic (d) برای INA133UA/2K5

داده پین‌آوت تفصیلی موجود نیست برای INA133UA/2K5.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

INA133UA/2K5 مناسب است برای 6 کاربردs: Current-Shunt Monitoring, Bridge-Sensor Signal Conditioning, Industrial Sensor Interfaces, Precision Voltage-Difference Measurements, Test and Measurement Instrumentation, Low-Power Sensor and Control Circuits.

⚡

Current-Shunt Monitoring

The INA133UA/2K5 fits precision current-shunt monitoring because its differential input structure is designed to reject voltage common to both shunt terminals. With a 1.5 MHz bandwidth, it can amplify fast current transitions rather than only static DC measurements. Its 450 µV offset contributes directly to current-measurement error when referenced to the shunt resistance, while approximately 0.95 mA operating current supports low-power instrumentation. Place the amplifier close to the shunt, route the sense pair symmetrically, and verify that the shunt voltage, common-mode range, and output swing remain within the operating limits.

🏭

Bridge-Sensor Signal Conditioning

The INA133UA/2K5 is appropriate for many bridge-based sensors because it amplifies the small differential voltage generated between the bridge excitation rails. Its precision internal resistor network reduces the matching burden associated with a discrete subtraction circuit, while 450 µV offset establishes a key contribution to the complete error budget. The 1.5 MHz bandwidth accommodates sensors whose output changes are faster than a static bridge measurement. Verify the bridge excitation voltage, common-mode operating region, permissible input polarity, and output swing before finalizing the gain and filter network.

🧩

Industrial Sensor Interfaces

The INA133UA/2K5 supports industrial sensor-interface designs requiring accurate differential extraction from noisy or high-impedance sources. Its 1.5 MHz bandwidth provides margin for dynamic sensor signals, and the approximately 0.95 mA power consumption is favorable for distributed or low-power measurement nodes. The amplifier’s laser-trimmed resistor network is designed to maintain gain accuracy and common-mode rejection as temperature changes. The board should include symmetric input routing, local supply bypassing, and protection appropriate to the sensor cable environment, with grounding checked for potential differences across the measurement source.

📱

Precision Voltage-Difference Measurements

The INA133UA/2K5 is useful when a system must measure the difference between two voltages rather than either voltage referenced to ground. Differential operation suppresses shared noise and permits a direct relationship between the bridge or shunt signal and the amplifier output. A 450 µV input offset specification defines the principal static error term, while the 1.5 MHz bandwidth supports signals with meaningful dynamic content. Confirm the input common-mode range and output voltage limits, and account for the 0.95 mA operating current when designing a low-energy acquisition node or portable meter.

🔧

Test and Measurement Instrumentation

The INA133UA/2K5 can serve as the precision input stage of a test or measurement instrument that must reject common-mode voltage while amplifying a smaller differential signal. The 1.5 MHz bandwidth supports general-purpose low-frequency and pulse-related measurements, and the integrated trimmed network simplifies gain implementation. Instrumentation designers should account for the 450 µV offset, source-imbalance error, input noise, and output saturation when establishing resolution limits. Short, equal-impedance differential traces, careful grounding, and stable bypass capacitors are important for preserving the precision expected from this amplifier class.

✈️

Low-Power Sensor and Control Circuits

The INA133UA/2K5 fits low-power sensor and control circuits where a differential measurement must be conditioned before filtering, conversion, or actuator control. Its approximately 0.95 mA operating current limits the amplifier's contribution to the power budget, while the 1.5 MHz bandwidth provides useful bandwidth beyond static sensor nodes. The device can provide gain in a compact 8-pin SOIC footprint without the component count of a discrete precision difference stage. Confirm the selected gain configuration, operating temperature, supply range, and output swing, and use low-leakage protection components when measuring high-impedance sources.

What is the bandwidth of INA133UA/2K5?
The INA133UA/2K5 has a 1.5 MHz gain-bandwidth product. This makes it suitable for differential signals that must be measured or conditioned faster than a static precision bridge amplifier. Texas Instruments describes the device as a high-speed precision difference amplifier with an integrated precision resistor network. The practical bandwidth of a complete circuit also depends on source impedance, gain, trace layout, and the filtering selected for the application.
What is the input offset voltage of INA133UA/2K5?
The INA133UA/2K5 is specified by Texas Instruments with a 450 µV input offset voltage. Offset voltage represents the amplifier output error produced when the differential input is zero. Because the device uses laser-trimmed internal resistors, it is designed to preserve gain accuracy and common-mode rejection over temperature. System-level error budgets should include this offset along with source imbalance, resistor tolerance, and analog front-end noise.
How much power does INA133UA/2K5 consume?
The INA133UA/2K5 consumes approximately 0.95 mA according to the Texas Instruments product page. This low supply-current characteristic suits portable instrumentation, industrial sensor interfaces, and battery-powered measurement systems. Actual board power depends on the selected supply voltage and whether the output is loaded. When estimating energy use, multiply the specified device current by its operating supply voltage and include the separately required bypass-current budget.
Where can I download the INA133UA/2K5 datasheet PDF?
The official INA133UA/2K5 documentation is available through the Texas Instruments product page and its linked manufacturer datasheet. The device is documented as an 8-pin SOIC precision difference amplifier with 1.5 MHz bandwidth, 450 µV offset, and 0.95 mA power consumption. Use the manufacturer PDF for the authoritative pin descriptions, recommended application circuit, electrical test conditions, ordering information, and package drawings.
Where is the INA133UA/2K5 pinout located?
The INA133UA/2K5 pinout is defined in the pin-configuration section and package drawing of the Texas Instruments INA133 datasheet. The manufacturer identifies this orderable configuration as an 8-pin SOIC (D) package. Assign PCB land patterns from that package drawing rather than inferring connections from an amplifier of a different package. The exposed functional guidance for this page is to use the manufacturer pin-description table when routing all eight connections.
What is the difference between INA133UA and INA133U?
INA133UA and INA133U belong to the same INA133 precision difference-amplifier family, but their ordering options can differ in package or temperature treatment. Texas Instruments support discussion specifically addresses the technical impact of substituting INA133UA for INA133U. For a PCB replacement, verify the exact package suffix and grade in the ordering table. Also confirm offset, temperature range, supply rating, and gain configuration rather than treating a family-level similarity as automatic interchangeability.
INA133UA/2K5 vs INA133UA/2K5E4 - which is better for industrial use?
INA133UA/2K5 is the primary choice when its specified temperature range and production grade satisfy the design. INA133UA/2K5E4 represents a distinct qualified ordering option, so its suitability depends on the specific industrial qualification, traceability, or temperature requirements in the system. Both use the INA133 precision difference-amplifier architecture. Compare the exact orderable records before substitution, particularly their temperature ratings and qualification conditions.
When should I choose INA133UA/2K5 over another difference amplifier?
Choose the INA133UA/2K5 when the design benefits from a 1.5 MHz precision difference amplifier with 450 µV offset and approximately 0.95 mA operating current in an 8-pin SOIC. It is particularly attractive when an integrated, trimmed resistor network is simpler than a discrete subtraction amplifier. If the application needs a different gain, wider supply range, rail-to-rail output, or a smaller package, select a device whose electrical limits better match those requirements.
Is INA133UA/2K5 suitable for bridge-sensor measurements?
The INA133UA/2K5 is suitable for many bridge-sensor front ends because it combines differential input handling, a 1.5 MHz bandwidth, and an integrated precision resistor network. Its 450 µV offset must be included in the measurement uncertainty, and the selected gain and common-mode range must accommodate the bridge output. Check the sensor excitation range, output swing, grounding, and filtering before finalizing the analog front end.
What is the best drop-in replacement for INA133UA/2K5?
The closest drop-in choices are same-brand INA133 ordering options that retain the 8-pin SOIC footprint and compatible precision-difference-amplifier functions, including INA133UA/2K5E4 and INA133U/2K5E4. No verified cross-brand part was established as an exact drop-in replacement. Before fitting any substitute, compare pin functions, gain, offset, bandwidth, supply range, common-mode range, output swing, and temperature grade against the original design requirements.
What can replace INA133UA/2K5?
INA133UA/2K5E4 and INA133U/2K5E4 are the principal same-brand candidates when an INA133-family replacement is required. They must be checked against the original ordering code for package, temperature grade, and production qualification. A generic amplifier with a similar pin count is not automatically replaceable because its gain, resistor network, common-mode range, and stability characteristics may differ. Use the INA133 manufacturer documentation for the final pin and electrical comparison.
Is INA133UA/2K5 the same as INA133U/2K5?
INA133UA/2K5 and INA133U/2K5 are closely related INA133 ordering options, but they should not be treated as identical without checking their exact package and temperature-ordering codes. Texas Instruments support material discusses differences between INA133UA and INA133U, including their effect when changing an existing circuit. Verify the manufacturer ordering table, pinout, temperature range, and electrical limits before using one as a drop-in replacement for the other.
Where can I buy INA133UA/2K5 online?
Use the Request a Quote form on this page to request INA133UA/2K5 availability, current lead time, and ordering support. The manufacturer identifies the part as an 8-pin SOIC precision difference amplifier, and a distributor listing confirms the exact orderable MPN. Quote requests are the appropriate route for current commercial terms without presenting a potentially stale price in technical content. Include your required quantity and date code when submitting the request.
What is the price of INA133UA/2K5?
Current INA133UA/2K5 commercial pricing should be obtained through the Request a Quote form on this page. The form allows the request to reflect the required quantity, packaging preference, and current supply conditions. Avoid relying on a historical or starting-price figure when budgeting production because component prices can change. For technical qualification, confirm that the quoted item remains the exact INA133UA/2K5 orderable code.
What is the lead time and stock status of INA133UA/2K5?
Request the current INA133UA/2K5 stock position, minimum order quantity, and lead time through the Request a Quote form on this page. The manufacturer product page confirms the exact orderable configuration, while distributor listings can change in stock quantity without notice. Include your production schedule and target shipment date in the request so the commercial response can reflect the appropriate allocation and logistics.
What are the key specifications of INA133UA/2K5 that engineers should know?
The INA133UA/2K5 combines a 1.5 MHz gain-bandwidth product, 450 µV input offset voltage, approximately 0.95 mA power consumption, and an 8-pin SOIC package. Texas Instruments describes it as a high-speed precision difference amplifier using a laser-trimmed internal resistor network. Its primary strengths are accurate differential signal handling, low offset, common-mode rejection, and low supply current. System design must also respect the exact input range, output swing, supply limits, and temperature grade.

داده‌های مرجع مهندسی برای INA133UA/2K5 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose INA133UA/2K5 when the design requires a compact 8-pin SOIC precision difference amplifier with 1.5 MHz bandwidth, 450 µV offset, and approximately 0.95 mA operating current. It is a strong fit for shunt monitoring, bridge sensors, and other differential measurements where an integrated trimmed resistor network is preferable to a discrete subtraction stage. Select INA133UA/2K5E4 only when its specific ordering qualification matches the production requirement, and consider INA133U/2K5 or INA133U/2K5E4 when their identified operating-temperature range is adequate. The INA133UA/2K5.A option should likewise be reviewed for its exact production designation. No cross-brand part was established as an exact drop-in match. Before selecting any alternative, verify pin functions, gain, common-mode range, output swing, supply rating, temperature grade, and stability. If the design requires rail-to-rail output, a wider supply range, or a smaller package, use an amplifier explicitly specified for those requirements rather than assuming footprint equivalence is sufficient.

مقایسه با جایگزین‌ها

پارامتر این محصول INA133UA/2K5E4 INA133U/2K5E4 INA133U/2K5 INA133UA/2K5.A
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Precision difference amplifier Precision difference amplifier Precision difference amplifier Precision difference amplifier Precision difference amplifier
Gain-Bandwidth Product 1.5 MHz 1.5 MHz 1.5 MHz 1.5 MHz 1.5 MHz
Power Consumption 0.95 mA 0.95 mA 0.95 mA 0.95 mA 0.95 mA
Integrated Resistor Network Laser-trimmed precision resistor network Laser-trimmed precision resistor network Laser-trimmed precision resistor network Laser-trimmed precision resistor network Laser-trimmed precision resistor network

تفاوت‌های کلیدی

  • Combines differential precision measurement with relatively high bandwidth (در مقابلINA133U/2K5E4)
  • Broad temperature-rated ordering option (در مقابلINA133U/2K5)
  • Integrated precision resistor network reduces external matching (در مقابلINA133UA/2K5E4)

یادداشت‌های طراحی

Route the two differential inputs as a matched pair with similar geometry and impedance. Minimize loop area between the source and amplifier, especially for shunt and bridge measurements where parasitic resistance can unbalance the inputs. Keep the amplifier and its input-network components close together, and avoid routing sense traces beneath or beside switching-converter nodes. For high-impedance sensors, include guarding on exposed input nodes and use low-leakage protection components.

Check the common-mode input range before applying a signal. The differential input rating does not guarantee operation when both inputs are near a supply rail or outside the usable common-mode window. Also confirm output swing at the selected gain, because a valid input can still drive the output into saturation. Include the 450 µV offset in the accuracy budget and account for source-imbalance error when the two input impedances are not matched.

Follow the manufacturer application circuit for supply bypassing and input/output compensation or stability networks. Place bypass capacitance at the amplifier supply pins rather than at a remote supply connector, and keep its ground return short. Install input protection with suitable clamping and leakage characteristics only when the signal path permits them. Preserve the 8-pin SOIC land pattern and check pin-one orientation carefully before assembly.

The 1.5 MHz gain-bandwidth product does not by itself guarantee a flat 1.5 MHz response at every gain setting. Review the manufacturer gain, bandwidth, phase, and stability plots for the selected INA133 configuration. Add filtering after the amplifier when out-of-band noise or transient behavior must be controlled. Maintain source impedances compatible with the selected gain and avoid excessive capacitive loading directly on the output.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The exact INA133UA/2K5 compliance declarations were not stated in the manufacturer or distributor records reviewed. AEC-Q100 is not applicable to the standard catalog ordering option unless a specifically qualified automotive variant is selected.

تاریخ تأیید داده‌ها: 2026-11-19 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

INA133UA/2K5 datasheet INA133UA/2K5 pinout INA133UA/2K5 datasheet pdf INA133UA/2K5 equivalent INA133UA/2K5 replacement INA133UA/2K5 price INA133UA/2K5 stock Texas Instruments INA133UA/2K5 INA133 1.5MHz difference amplifier INA133 8-pin SOIC pinout INA133UA/2K5 current shunt INA133UA/2K5 bridge sensor INA133UA/2K5 vs INA133U/2K5 INA133UA/2K5 application circuit INA133UA/2K5 SPICE model

قطعات و اصطلاحات مرتبط

Texas Instruments INA133UA/2K5 INA133UA/2K5E4 INA133U/2K5E4 INA133U/2K5 INA133UA/2K5.A precision difference amplifier difference amplifier differential amplifier amplifier IC semiconductor common-mode rejection input offset voltage gain-bandwidth product laser-trimmed resistor network 8-pin SOIC SOIC family surface-mount package current-shunt monitoring bridge sensor industrial instrumentation signal conditioning power management sensor interface test and measurement
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ