Microchip Technology

KSZ8842-PMBL-AM - 2-Port 10/100 Ethernet Switch | Microchip

MPN: KSZ8842-PMBL-AM ✓ فعال
100-LFBGA, 9 x 9 mm Package 10/100 Base-T/TX Speed
حداقل سفارش: 1 |

KSZ8842-PMBL-AM نمای کلی

Microchip Technology KSZ8842-PMBL-AM is a fully managed, two-port Layer 2 Ethernet switch with a 32-bit, 33 MHz PCI processor interface, two 10/100 Base-T/TX ports, and a 100-LFBGA package measuring 9 x 9 mm. The device provides an industrial-temperature-grade option for embedded PCI networking systems requiring integrated switch management.

An Ethernet switch is a semiconductor that connects multiple Ethernet nodes while using Layer 2 media-access-control addresses to forward frames. The KSZ8842 belongs to the broader network-interface hierarchy: Ethernet controller, network interface IC, interface IC, and integrated circuit. It integrates two Fast Ethernet PHYs and switch functions, reducing the need for separate Ethernet controllers or physical-layer devices in compact embedded equipment.

The KSZ8842-PMBL-AM is based on Microchip's fourth-generation integrated Layer 2 switch architecture. Key features include two managed 10/100 ports, a 32-bit PCI interface operating at 33 MHz, IEEE 802.3u compliance, and an industrial-temperature-grade ordering option. Its small 100-LFBGA package supports space-constrained PCI host systems while exposing the complete two-port switching function on one device.

The PCI host interface provides a direct path for a processor or embedded controller to configure the switch, exchange packet data, and access switch management registers. This integration is particularly useful when an embedded system needs two Ethernet ports but has limited board area or component count. Exact register behavior, interrupt architecture, and management features should be confirmed from the manufacturer's KSZ8842-PMQL/PMBL datasheet before final software configuration.

Typical uses include industrial control systems, embedded routers, automated test equipment, POS terminals, and PCI-based communication appliances. In these applications, the two integrated Fast Ethernet ports can support a local equipment network, uplink, or network segmentation. The industrial-temperature designation makes the PMBL-AM version more appropriate for extended-temperature equipment than the standard PMBL ordering option.

PCB implementation requires careful review of the 100-LFBGA land pattern, power and ground distribution, clock requirements, and high-speed signal routing. The 9 x 9 mm package is not a leaded package, so assembly capability, solder-mask definition, stencil aperture design, and via-in-pad or thermal-via requirements must be coordinated with the board manufacturer before release.

This product analysis consolidates the manufacturer architecture description, package information, ordering distinctions, replacement considerations, and PCB implementation guidance into an engineering-focused resource for evaluating the KSZ8842-PMBL-AM in compact embedded Ethernet systems.

جایگزین‌های drop-in برای KSZ8842-PMBL-AM — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای KSZ8842-PMBL-AM (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Ethernet Speed, Host Interface, Product Type.

Microchip Technology
Ethernet Speed: 10/100 Base-T
Host Interface: Generic PCI interface
Product Type: Managed two-port Ethernet switch
مقایسه با KSZ8842-PMBL-AM →

KSZ8842-PMBL

✅ جایگزین مستقیم
Microchip Technology
📦 100-LFBGA (9x9)
Managed two-port Ethernet switch · 2 ports · 10/100 Base-T · Generic PCI interface · 32 bit · 33 MHz · Integrated Layer 2 switch · Integrated

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

KSZ8842-PMBL-AM حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Managed 2-port Layer 2 Ethernet switch
Number of Ethernet Ports 2 ports
Ethernet Speed 10/100 Base-T/TX
Host Interface 32-bit PCI
PCI Interface Clock 33 MHz
Network Standard IEEE 802.3u
Switch Architecture Fourth-generation integrated Layer 2 switch
Temperature Grade Industrial
بسته‌بندی 100-LFBGA, 9 x 9 mm
نوع نصب Surface mount
تعداد پایه 100 pins
Managed Switch Ports 2 ports
Physical Layer Functions Integrated 10/100 Base-T/TX PHYs

راهنمای پیکربندی پین KSZ8842-PMBL-AM 100-lfbga, 9 x 9 mm

پیکربندی پین برای KSZ8842-PMBL-AM (پکیج 100-lfbga, 9 x 9 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 100-lfbga, 9 x 9 mm برای KSZ8842-PMBL-AM

داده پین‌آوت تفصیلی موجود نیست برای KSZ8842-PMBL-AM.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

KSZ8842-PMBL-AM مناسب است برای 6 کاربردs: Embedded PCI Router, Industrial Control Gateway, Automated Test Equipment, Point-of-Sale Terminal, Embedded Communication Appliance, PCI Network Segmentation Controller.

🌐

Embedded PCI Router

The KSZ8842-PMBL-AM fits an embedded router that connects a host processor to two managed 10/100 Base-T/TX ports. Its 32-bit, 33 MHz PCI interface provides a direct host path for packet exchange and switch configuration, while the integrated Layer 2 engine reduces the need for separate Ethernet switch silicon. The 100-LFBGA, 9 x 9 mm package also supports compact embedded boards, although Ethernet magnetics, isolation, and connector implementation remain required.

🏭

Industrial Control Gateway

The KSZ8842-PMBL-AM is appropriate for an industrial control gateway requiring two managed Fast Ethernet connections and an industrial-temperature ordering option. The host processor can access both ports through the 32-bit, 33 MHz PCI interface, reducing component count compared with a separate Ethernet controller and switch combination. Design teams should use the manufacturer reference circuit for magnetics, termination, supply routing, and PCI signal layout.

🔧

Automated Test Equipment

A PCI-based automated test system can use the KSZ8842-PMBL-AM to provide two managed 10/100 network connections without adding a separate two-port switch. The 32-bit PCI host interface allows equipment firmware to exchange test data and monitor switching status through the device registers. Its 100-LFBGA package is small but requires assembly-process validation, controlled BGA layout, and careful separation between PCI, clock, and Ethernet-related routing.

🖥️

Point-of-Sale Terminal

The KSZ8842-PMBL-AM can serve a PCI point-of-sale terminal that needs separate network ports for a primary connection and local peripheral link. Two managed 10/100 ports provide Layer 2 switching in one device, while the PCI interface connects the network function to the host processor. The compact 9 x 9 mm LFBGA helps minimize board area, but power integrity, Ethernet magnetics, chassis grounding, and production stencil testing remain essential.

🧩

Embedded Communication Appliance

The KSZ8842-PMBL-AM is suitable for compact communication appliances that expose two managed Fast Ethernet ports through a PCI host bus. Integrating the PHYs and Layer 2 switch supports a simpler hardware architecture than a discrete controller-plus-switch design. Firmware should use the manufacturer register definitions for port configuration, status, interrupts, and address-table operation, while the PCB follows the reference layout for the 100-LFBGA device.

🖥️

PCI Network Segmentation Controller

The KSZ8842-PMBL-AM can implement a dedicated Layer 2 segmentation point between a PCI host and two 10/100 network segments. Its fully managed switch architecture allows host software to configure forwarding behavior through the PCI interface. The device is well suited to fixed-function embedded equipment where predictable wired connectivity is needed, but production designs should verify register behavior, reset requirements, clock topology, and thermal performance under sustained traffic.

خلاصه محصولات پیشنهادی

KSZ8842-PMBL Microchip Technology استفاده‌شده در: Embedded PCI Router, Industrial Control Gateway, Automated Test Equipment, Point-of-Sale Terminal, Embedded Communication Appliance, PCI Network Segmentation Controller KSZ8842-PMBL-AM-TR Same-family PMBL ordering option استفاده‌شده در: Embedded PCI Router, Industrial Control Gateway, Automated Test Equipment, Point-of-Sale Terminal, Embedded Communication Appliance, PCI Network Segmentation Controller
What is the KSZ8842-PMBL-AM?
The KSZ8842-PMBL-AM is a fully managed, two-port Layer 2 Ethernet switch with a 32-bit, 33 MHz PCI processor interface. According to the Microchip KSZ8842-PMQL/PMBL datasheet, it combines two 10/100 Base-T/TX ports in a 100-LFBGA package measuring 9 x 9 mm. It is intended for embedded systems that need compact, integrated PCI Ethernet connectivity.
How many Ethernet ports does the KSZ8842-PMBL-AM provide?
The KSZ8842-PMBL-AM provides two integrated 10/100 Base-T/TX Ethernet ports. The manufacturer describes it as a fully managed two-port switch with an integrated Layer 2 forwarding engine. This allows a PCI host processor to manage both ports through one network-interface device rather than requiring separate switch or physical-layer components.
What interface does the KSZ8842-PMBL-AM use?
The KSZ8842-PMBL-AM uses a 32-bit PCI processor interface operating at 33 MHz. According to the Microchip KSZ8842-PMQL/PMBL datasheet, the KSZ8842-PMBL variant is specifically associated with the PCI CPU interface. The host processor uses this interface for packet transfer and switch-management access.
What package does the KSZ8842-PMBL-AM use?
The KSZ8842-PMBL-AM uses a 100-LFBGA package measuring 9 x 9 mm. Product listings identify this package for the PMBL version, while the manufacturer datasheet distinguishes PMBL from the PQFP-packaged PMQL variant. Because the LFBGA is a fine-pitch surface-mount package, the PCB land pattern and assembly process must support 100-contact BGA soldering.
Is the KSZ8842-PMBL-AM suitable for industrial equipment?
The KSZ8842-PMBL-AM is the industrial-temperature-grade ordering option for the PMBL package. Microchip identifies the PMQLI and PMBL AM variants as industrial-temperature-grade versions of the KSZ8842-PMQL/PMBL family. Confirm the exact minimum and maximum operating temperatures in the device ordering information before deployment.
Where can I download the KSZ8842-PMBL-AM datasheet PDF?
The KSZ8842-PMBL-AM datasheet can be downloaded from the official Microchip KSZ8842 document link on this page. The document covers the KSZ8842-PMQL/PMBL family and distinguishes the PQFP PMQL package from the LFBGA PMBL package. Use the pin-description and ordering-information tables for PCB and assembly decisions.
Where can I find the KSZ8842-PMBL-AM pinout?
The KSZ8842-PMBL-AM pinout is located in the pin-description table of the Microchip KSZ8842-PMQL/PMBL datasheet. The component uses a 100-LFBGA package, so the package drawing and land pattern must be used together with the electrical pin table. Do not infer BGA assignments from another package in the KSZ8842 family.
What is the difference between KSZ8842-PMBL-AM and KSZ8842-PMBL?
The primary documented distinction is the temperature grade: KSZ8842-PMBL-AM is the industrial-temperature option, while KSZ8842-PMBL is the standard PMBL ordering option. Both use the 100-LFBGA, 9 x 9 mm package and provide the same two-port 10/100 switch with a 32-bit, 33 MHz PCI interface. Verify device revision and qualification requirements before substitution.
Can KSZ8842-PMBL-AM replace KSZ8842-PMBL?
KSZ8842-PMBL-AM can serve as a functional replacement for KSZ8842-PMBL when the PCB accepts the same 100-LFBGA land pattern and the industrial-temperature grade is acceptable. Both parts are associated with the two-port PCI Ethernet switch and 9 x 9 mm PMBL package. Confirm the exact pinout, ordering information, and operating-temperature requirements before production use.
What is the best drop-in replacement for KSZ8842-PMBL-AM?
KSZ8842-PMBL is the closest documented same-package replacement because both use the 100-LFBGA, 9 x 9 mm PMBL package and implement the same two-port 10/100 PCI Ethernet switch architecture. The trade-off is temperature grade: PMBL-AM is the industrial-temperature ordering option. No independently verified cross-brand drop-in replacement was identified for this exact 100-LFBGA device.
When should I choose KSZ8842-PMBL-AM over KSZ8842-PMBL?
Choose KSZ8842-PMBL-AM when the equipment requires the documented industrial-temperature ordering option and uses the 100-LFBGA, 9 x 9 mm PMBL footprint. Choose KSZ8842-PMBL for standard-temperature requirements where that grade is sufficient. Both provide two managed 10/100 ports and a 32-bit, 33 MHz PCI processor interface.
Is the KSZ8842-PMBL-AM suitable for an embedded PCI router?
The KSZ8842-PMBL-AM is suitable for an embedded PCI router that needs two managed Fast Ethernet ports in a compact board area. Its 32-bit, 33 MHz PCI interface supports host packet transfer, while the integrated Layer 2 switch manages the two 10/100 ports. Media transformers or suitable Ethernet magnetics still need to be incorporated according to the reference design.
Is there a Microchip equivalent to the KSZ8842-PMBL-AM?
KSZ8842-PMBL is the closest same-package Microchip option, but it differs in temperature grade rather than providing a fully identical ordering code. The KSZ8842-PMBL-AM combines the PMBL package with the industrial-temperature designation. Cross-brand alternatives require independent verification of the 100-LFBGA land pattern, PCI interface, management registers, and electrical behavior.
Where can I buy KSZ8842-PMBL-AM and check its lead time?
Use the Request a Quote form on this page to request KSZ8842-PMBL-AM availability, current lead time, and an order quotation. The manufacturer offers both PMQL and PMBL package variants, and the AM suffix identifies the industrial-temperature PMBL option. Confirm the exact suffix, package, reel configuration, and minimum order quantity when placing the request.
What are the key specifications of KSZ8842-PMBL-AM that engineers should know?
The key specifications are two managed 10/100 Base-T/TX ports, a 32-bit PCI host interface at 33 MHz, IEEE 802.3u compliance, and a 100-LFBGA package measuring 9 x 9 mm. According to the Microchip KSZ8842-PMQL/PMBL datasheet, the device is a fourth-generation, fully managed Layer 2 switch with the AM option providing industrial temperature grade.

داده‌های مرجع مهندسی برای KSZ8842-PMBL-AM — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose KSZ8842-PMBL-AM for an embedded PCI system that requires two managed 10/100 Base-T/TX ports and the documented industrial-temperature grade. Choose KSZ8842-PMBL when the same 100-LFBGA footprint and two-port switch architecture are needed but the standard temperature grade is sufficient. Both alternatives provide a 32-bit, 33 MHz PCI interface and IEEE 802.3u Layer 2 switching. Before substituting between them, confirm the complete ordering information, pin assignments, reset behavior, register map, supply requirements, and package drawing. Avoid candidates in different KSZ8842 package or CPU-interface configurations unless the PCB can be redesigned. No independently verified cross-brand part was established as a pin-compatible 100-LFBGA replacement, so a cross-brand substitution should not be treated as a drop-in change without complete electrical, firmware, and PCB validation.

مقایسه با جایگزین‌ها

پارامتر این محصول KSZ8842-PMBL
Brand Microchip Technology Microchip Technology
Package 100-LFBGA (9x9) 100-LFBGA (9x9)
Ethernet Ports 2 ports 2 ports
Ethernet Speed 10/100 Base-T/TX 10/100 Base-T/TX
Host Interface 32-bit PCI at 33 MHz 32-bit PCI at 33 MHz
Temperature Grade Industrial Standard grade
Network Standard IEEE 802.3u IEEE 802.3u
Switch Architecture Fully managed fourth-generation Layer 2 switch Fully managed fourth-generation Layer 2 switch

تفاوت‌های کلیدی

  • Industrial-temperature ordering option (در مقابلKSZ8842-PMBL)
  • Two managed Fast Ethernet ports in one device (در مقابلKSZ8842-PMBL)
  • Compact PCI network integration (در مقابلKSZ8842-PMBL)

یادداشت‌های طراحی

Use the Microchip 100-LFBGA land pattern and assembly recommendations without modifying ball locations or adding unofficial via-in-pad features. Review the package drawing, solder-mask opening, stencil thickness, and assembly house capabilities together. The package has 100 contacts in a 9 x 9 mm footprint, so registration and coplanarity errors can affect both the PCI and Ethernet-related connections.

Route the 32-bit PCI interface as a controlled-length, impedance-controlled group and keep it separated from Ethernet magnetics and switching regulators. Follow the manufacturer reference layout for clock routing, decoupling, ground partitioning, and via placement. Place input and bulk capacitors near their associated supply pins and preserve a low-impedance return path beneath high-speed interfaces.

Confirm the device supply limits, current consumption, sequencing requirements, and power-supply tolerances from the Microchip datasheet before finalizing the rail design. Decouple each required supply with the capacitance and ESR characteristics specified by the manufacturer. Avoid deriving regulator sizing solely from nominal current because Ethernet magnetics, the host interface, and transient conditions can change the system power profile.

Do not substitute the PMQL package for PMBL without changing the PCB land pattern, and do not treat the AM suffix as a temperature-range specification by itself. Confirm the complete ordering code, package, temperature grade, and reel configuration. After PCB assembly, validate PCI enumeration, both Ethernet ports, reset behavior, and the intended Layer 2 configuration before deploying the equipment.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The industrial-temperature ordering option does not by itself establish AEC-Q100 qualification. Compliance declarations should be confirmed against the current Microchip product documentation for the exact ordering code.

تاریخ تأیید داده‌ها: 2026-11-18 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ksz8842 16mvli ksz8842 pmql micrel ksz8842 KSZ8842-PMBL-AM datasheet KSZ8842-PMBL-AM datasheet pdf KSZ8842-PMBL-AM pinout KSZ8842-PMBL-AM equivalent KSZ8842-PMBL-AM replacement KSZ8842-PMBL-AM vs KSZ8842-PMBL KSZ8842-PMBL-AM 100-LFBGA KSZ8842-PMBL-AM PCI interface KSZ8842-PMBL-AM industrial temperature KSZ8842-PMBL-AM application circuit KSZ8842-PMBL-AM price KSZ8842-PMBL-AM stock

قطعات و اصطلاحات مرتبط

Microchip Technology KSZ8842-PMBL-AM KSZ8842-PMBL KSZ8842-PMBL-AM-TR KSZ8842-PMQL Ethernet switch Layer 2 switch network interface IC interface IC integrated circuit 10/100 Base-T/TX Fast Ethernet 32-bit PCI interface 33 MHz PCI IEEE 802.3u 100-LFBGA LFBGA package surface mount industrial temperature grade Ethernet magnetics embedded router industrial control gateway PCI host processor automatic address management
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ