Microchip Technology

LAN9303I-ABZJ-TR - 3-Port Ethernet Switch | Microchip

MPN: LAN9303I-ABZJ-TR ✓ فعال
56-pin QFN, 8 mm x 8 mm, exposed pad Package 10 Mbps and 100 Mbps Speed
حداقل سفارش: 1 |

LAN9303I-ABZJ-TR نمای کلی

The Microchip Technology LAN9303I-ABZJ-TR is a compact 3-port managed 10/100 Ethernet switch with MII, RMII, and I2C connectivity in a 56-pin QFN package with an exposed pad. It supports 10 Mbps and 100 Mbps Ethernet operation and is designed for embedded consumer, industrial automation, communications, and networking equipment where a three-port Ethernet switch must be added without a large external PHY implementation.

An Ethernet switch is a network-layer device that receives Ethernet frames on one port, applies address-based forwarding, and transmits each frame toward the appropriate destination port. The LAN9303 family combines three 10/100 Ethernet ports with switch management and host-interface functions in one low-footprint device. This integration reduces the component count and board area required for embedded Ethernet connectivity while preserving a conventional MII or RMII connection to a host processor.

Key features include three 10/100 ports, integrated 10/100 Base-T and TX PHY functions, support for MII and RMII host interfaces, and an I2C management interface. The 56-pin QFN package measures 8 mm by 8 mm and includes an exposed thermal pad. Tape-and-reel ordering is represented by the -TR suffix. The manufacturer describes the family as a high-performance, small-footprint, fully featured managed switch intended for consumer and embedded electronics with rapid development cycles.

The LAN9303 architecture provides the switching function and physical-layer connectivity needed for embedded equipment, while the host-facing digital interface connects the device to a network-capable processor. MII and RMII support provide options for integrating with processors that use parallel or reduced-width media-independent interfaces. I2C access supports configuration and management tasks in systems where separate GPIO programming or a more complex host interface would be unnecessary.

Typical uses include industrial control panels, factory automation equipment, embedded network gateways, set-top and consumer devices, print systems, and compact communications equipment. A three-port arrangement is useful when one port connects to an upstream network and two ports serve local nodes, or when two devices need direct network connectivity around the switch. The managed-switch feature set also makes the device suitable for embedded designs that require more controlled network behavior than an unmanaged repeater.

Board design must account for the exposed pad, high-speed differential Ethernet pairs, controlled impedance, component placement around PHY sections, and the power requirements of the selected operating mode. Keep the manufacturer-recommended magnetic-interface or magnetics-bypass layout for copper connections, and route each 10/100 Ethernet pair as a controlled-impedance differential pair. The exposed pad should be connected to the appropriate ground plane using the thermal and layout guidance in the manufacturer datasheet.

This page consolidates the device identity, interface roles, package characteristics, sourcing information, comparison points, and practical integration guidance into one engineering-oriented reference. It is designed to help designers distinguish the managed LAN9303I function from unrelated Ethernet controllers and to plan a board implementation before committing to the 56-pin QFN footprint.

جایگزین‌های drop-in برای LAN9303I-ABZJ-TR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LAN9303I-ABZJ-TR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Ethernet Speed, Host Interface, Maximum Data Rate, Product Type.

Microchip Technology
Package: 56-pin QFN, 8 mm x 8 mm
Ethernet Speed: 10/100 Base-T/TX
Maximum Data Rate: 100 Mbit/s per port
مقایسه با LAN9303I-ABZJ-TR →
Microchip Technology
Package: 128-lead XVTQFP (14 x 14 mm) with exposed pad
Ethernet Speed: 10 Mbps / 100 Mbps per port
Host Interface: MII (Media Independent Interface), parallel
مقایسه با LAN9303I-ABZJ-TR →

LAN9313I-NZW-TR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Microchip Technology
📦 56-QFN (8x8) exposed pad
3-Port 10/100 Managed Ethernet Switch · 3 · 10 Mbps / 100 Mbps per port · MII (Media Independent Interface), parallel · 3 x 10/100 BASE-T/TX PHY · 3.3 V · 135 mA · 128-lead XVTQFP (14 x 14 mm) with exposed pad

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LAN9303I-ABZJ-TR حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 3-port managed 10/100 Ethernet switch
Number of Ethernet Ports 3 ports
Supported Ethernet Speeds 10 Mbps and 100 Mbps
Ethernet PHY Integrated 10/100 Base-T/TX PHY
Host Interface MII/RMII
Management Interface I2C
بسته‌بندی 56-pin QFN, 8 mm x 8 mm, exposed pad
نوع نصب Surface mount
Orderable Packaging Tape and reel
Maximum Data Rate 100 Mbps per port
Switch Management Managed Ethernet switch

راهنمای پیکربندی پین LAN9303I-ABZJ-TR 56-pin qfn, 8 mm x 8 mm, exposed pad

پیکربندی پین برای LAN9303I-ABZJ-TR (پکیج 56-pin qfn, 8 mm x 8 mm, exposed pad). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 56-pin qfn, 8 mm x 8 mm, exposed pad برای LAN9303I-ABZJ-TR

داده پین‌آوت تفصیلی موجود نیست برای LAN9303I-ABZJ-TR.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LAN9303I-ABZJ-TR مناسب است برای 6 کاربردs: Industrial Automation Controller, Embedded Network Gateway, Set-Top and Consumer Equipment, Factory Communication Hub, Printer and Imaging Controller, IoT Edge Device.

🏭

Industrial Automation Controller

The LAN9303I-ABZJ-TR fits industrial automation controllers that must connect a host processor to multiple 10/100 Ethernet devices while keeping the hardware compact. Its three managed ports can provide one network uplink and two local connections, or connect separate sensors, drives, and service interfaces. The integrated MII/RMII and I2C interfaces reduce the need for discrete Ethernet PHY components, while the 56-QFN package limits board footprint. Design the copper network section around the manufacturer’s magnetic-interface or magnetics-bypass layout, and confirm operating-temperature requirements for the installation environment.

🌐

Embedded Network Gateway

The LAN9303I-ABZJ-TR is well suited to an embedded gateway that must bridge a processor-based control plane to multiple 10/100 networks. One port can face the external network while two ports serve local equipment, or the three ports can support internal network segmentation. At 100 Mbps per port, the switch provides Fast Ethernet throughput for management, configuration, and supervisory traffic. The RMII option can reduce host-side pin count, while I2C management access supports configuration from the same embedded processor.

📺

Set-Top and Consumer Equipment

The LAN9303I-ABZJ-TR supports set-top boxes and consumer products that require three Fast Ethernet connections without implementing a three-port switch externally. A system can use one port for service-network access and two for local peripherals or media devices. Its managed-switch architecture offers more structured forwarding behavior than a simple repeater, while the 8 mm by 8 mm QFN package conserves board area. Product developers should preserve the recommended Ethernet magnetics placement and separation between each differential pair and other high-speed circuitry.

🔧

Factory Communication Hub

The LAN9303I-ABZJ-TR can form the Ethernet-switching core of a compact factory communication hub for machine controllers, remote I/O, and service equipment. Its three 10/100 ports support a useful topology in which one uplink connects to a plant network and two downstream ports serve field equipment. Managed switching helps organize traffic at the embedded system level, and MII/RMII connectivity allows implementation with different host-controller resources. Copper ports require careful differential-pair routing, controlled impedance, and the manufacturer-prescribed magnetic-component layout.

🖥️

Printer and Imaging Controller

The LAN9303I-ABZJ-TR fits printer, scanner, and imaging controllers that need a local Ethernet switch with three Fast Ethernet ports. The ports can connect a host controller to a network uplink and one or two service interfaces, avoiding separate Ethernet switches when board space is constrained. The 56-pin QFN outline supports dense layouts, and the managed switch provides frame-forwarding functionality at the system level. Validate connector magnetics, isolation, return-path design, and thermal performance around the exposed pad before release.

🧩

IoT Edge Device

The LAN9303I-ABZJ-TR is appropriate for an IoT edge device that connects a host processor with sensors, cameras, access-control equipment, and an upstream network. Three 10/100 ports allow a practical combination of infrastructure uplink and two local links without adding three separate Ethernet PHYs. The switch’s MII and RMII options provide flexibility against different processor pin budgets, while I2C enables management access. For low-power edge nodes, evaluate controller sleep requirements and Ethernet link behavior during the intended duty cycle before finalizing the power architecture.

What is the LAN9303I-ABZJ-TR?
The LAN9303I-ABZJ-TR is a Microchip Technology 3-port managed 10/100 Ethernet switch with integrated Base-T/TX PHYs, an MII/RMII host interface, and an I2C management interface. According to the manufacturer LAN9303/LAN9303i datasheet, the device is designed for embedded consumer and industrial automation products that need a compact, integrated Ethernet switching function.
How many Ethernet ports does the LAN9303I-ABZJ-TR support?
The LAN9303I-ABZJ-TR supports three 10/100 Ethernet ports, with each port operating at 10 Mbps or 100 Mbps. This makes the device suitable for an uplink-and-two-downstream topology or for connecting multiple local embedded nodes. The manufacturer datasheet identifies the LAN9303 and LAN9303i as full-featured 3-port managed Ethernet switches for embedded applications.
Which host interfaces are supported by LAN9303I-ABZJ-TR?
The LAN9303I-ABZJ-TR supports MII and RMII connections to a host processor, as identified by the product listing and manufacturer datasheet. MII provides a parallel media-independent interface, while RMII reduces the number of host-side signals. The selected interface should be matched to the Ethernet-capable controller and its clocking requirements in the system design.
Where can I download the LAN9303I-ABZJ-TR datasheet PDF?
The LAN9303I-ABZJ-TR datasheet PDF can be downloaded from Microchip Technology through the official LAN9303 product-document links. The document covers the LAN9303 and LAN9303i family, including its 3-port 10/100 managed-switch architecture, electrical characteristics, package information, and application guidance. Use the manufacturer document when assigning pins or designing the PCB.
Where can I find the LAN9303I-ABZJ-TR pinout?
The LAN9303I-ABZJ-TR pinout is shown in the pin-description and package sections of the official LAN9303/LAN9303i datasheet. The device is ordered in a 56-pin QFN package with an exposed pad, and the -TR suffix denotes tape-and-reel packaging. Use the datasheet pin table and land-pattern guidance rather than relying on a generic QFN drawing.
What package does the LAN9303I-ABZJ-TR use?
The LAN9303I-ABZJ-TR uses a 56-pin QFN package measuring 8 mm by 8 mm and includes an exposed pad. Manufacturer and distributor listings describe the package as 56-QFN with exposed pad, while the order code identifies tape-and-reel delivery. The exposed pad requires the thermal and ground-connection treatment specified in the manufacturer layout guidance.
Where can I buy the LAN9303I-ABZJ-TR online?
The LAN9303I-ABZJ-TR can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current unit availability, quantity breaks, lead time, and order handling for the exact -TR order code. Confirm that the quotation specifies LAN9303I-ABZJ-TR and tape-and-reel packaging rather than the tray order code.
What is the price of the LAN9303I-ABZJ-TR?
The current commercial price for the LAN9303I-ABZJ-TR is determined during quotation and is not fixed in this technical description. Use the Request a Quote form on this page with your required quantity, packaging, and delivery destination. This ensures that the order response corresponds to the exact LAN9303I-ABZJ-TR part number and current component supply.
Is the LAN9303I-ABZJ-TR in stock?
Current stock status for the LAN9303I-ABZJ-TR should be confirmed through the Request a Quote form on this page. Distributor search results indicate that the part is offered for ordering, but they do not establish a guaranteed project-specific inventory allocation. Include your required quantity and schedule so the quotation can confirm the current lead time and availability.
What is the lead time for the LAN9303I-ABZJ-TR?
The lead time for the LAN9303I-ABZJ-TR depends on current factory and distribution availability and must be confirmed for the requested quantity. Submit the quantity, target date, and packaging requirements through the Request a Quote form on this page. The manufacturer product listing shows the device as an orderable product, but a current project allocation requires a dated quotation.
Is the LAN9303I-ABZJ-TR suitable for industrial automation?
The LAN9303I-ABZJ-TR is suitable for industrial automation designs that require three integrated 10/100 Ethernet ports and a managed switching function. The manufacturer specifically identifies consumer electronics and industrial automation as target markets for the LAN9303 family. Final suitability still depends on the device's operating-temperature and environmental requirements for the installation location.
Can LAN9313I-NZW-TR replace the LAN9303I-ABZJ-TR?
The LAN9313I-NZW-TR is the closest same-family candidate for evaluation, but it should not be treated as an automatic drop-in replacement without a pin-by-pin review. Both devices are 3-port 10/100 Ethernet switches associated with 56-QFN implementations, yet their integrated-PHY, host-interface, and management configurations must be compared against the LAN9303I-ABZJ-TR datasheet before changing a released PCB.
When should I choose the LAN9303I-ABZJ-TR instead of another Ethernet switch?
Choose the LAN9303I-ABZJ-TR when the design needs exactly three 10/100 ports, an integrated managed Ethernet switch, and either MII or RMII host connectivity in an 8 mm by 8 mm QFN package. It is particularly appropriate when reducing external PHY count and board area are primary objectives. Choose another switch when the application requires a different port count, copper-interface architecture, temperature range, or host protocol.
What can replace the LAN9303I-ABZJ-TR?
No verified universal drop-in replacement was identified for the LAN9303I-ABZJ-TR in the available manufacturer and distributor information. The LAN9313I-NZW-TR is a related same-family 3-port 10/100 switch and is the most practical candidate for a detailed compatibility study, but package similarity alone does not prove pin compatibility. Confirm every signal, supply, clock, PHY, and exposed-pad connection in the datasheets.
What are the key specifications of LAN9303I-ABZJ-TR that engineers should know?
The key LAN9303I-ABZJ-TR specifications are three integrated 10/100 Ethernet ports, operation at 10 Mbps or 100 Mbps, MII and RMII host interfaces, an I2C management interface, and a 56-pin 8 mm by 8 mm QFN package with an exposed pad. According to the manufacturer datasheet, the device is a managed Ethernet switch intended for embedded consumer and industrial automation equipment.

داده‌های مرجع مهندسی برای LAN9303I-ABZJ-TR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LAN9303I-ABZJ-TR when an embedded system needs exactly three 10/100 Ethernet ports, integrated PHYs, managed switching, and an MII, RMII, or I2C management connection in an 8 mm by 8 mm QFN package. It is a strong choice for industrial controllers, communication hubs, imaging equipment, and gateways where integrating the switch function reduces component count. The LAN9313I-NZW-TR deserves consideration when its integrated-PHY arrangement better matches the architecture, but it should be treated as a qualified design review rather than an automatic replacement. Do not select a single-port Ethernet PHY when multiple local links are required, and do not select a different switch family without checking copper-media support, host timing, management features, thermal limits, and exposed-pad layout.

مقایسه با جایگزین‌ها

پارامتر این محصول LAN9313I-NZW-TR
Brand Microchip Technology Microchip Technology
Package 56-QFN (8x8) with exposed pad 56-QFN (8x8) exposed-pad format
Product Type Managed 10/100 Ethernet switch Managed 10/100 Ethernet switch
Ethernet Port Count 3 ports 3 ports
Supported Speed 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Integrated PHY Configuration 10/100 Base-T/TX PHY Differing integrated-PHY configuration
Orderable Packaging Tape and reel Tape and reel

تفاوت‌های کلیدی

  • Integrated three-port managed-switch architecture (در مقابلLAN9313I-NZW-TR)
  • Reduced host-side interface option (در مقابلLAN9313I-NZW-TR)
  • Orderable exact 56-QFN tape-and-reel configuration (در مقابلLAN9313I-NZW-TR)

یادداشت‌های طراحی

Route each 10/100 Ethernet differential pair as a controlled-impedance pair and follow the manufacturer’s magnetics or magnetics-bypass layout exactly. Keep the PHY sections and digital host interface physically separated to reduce radiated emissions and susceptibility. Place termination, common-mode components, and magnetic devices only where prescribed by the reference circuit; arbitrary rearrangement can degrade return loss and cable compatibility.

Treat the 56-QFN exposed pad as both a thermal feature and a required electrical connection. Follow the manufacturer’s land pattern and thermal-via guidance, connect the pad to the designated ground plane, and provide copper area around the package where layout rules allow. Validate junction temperature under the maximum sustained traffic and power-supply conditions rather than assuming the compact package remains cool.

Do not substitute the non-I or non-TR order codes without checking grade, temperature, tray-versus-reel handling, and qualification. Likewise, do not install the LAN9313I-NZW-TR into an existing LAN9303I-ABZJ-TR board solely because both use a 56-QFN outline. Compare every power, clock, reset, management, PHY, and exposed-pad connection before treating it as a drop-in replacement.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated in the manufacturer and distributor information for this order code.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

lan9303i abzj tr lan9303i abzj lan9303i abzj datasheet LAN9303I-ABZJ-TR datasheet LAN9303I-ABZJ-TR pinout LAN9303I-ABZJ-TR 56-QFN LAN9303I-ABZJ-TR specifications LAN9303I-ABZJ-TR MII RMII LAN9303I-ABZJ-TR price LAN9303I-ABZJ-TR replacement LAN9303I-ABZJ-TR vs LAN9313I-NZW-TR Microchip LAN9303I-ABZJ-TR

قطعات و اصطلاحات مرتبط

Microchip Technology LAN9303I-ABZJ-TR LAN9313I-NZW-TR LAN9303 LAN9303i Ethernet switch managed Ethernet switch 10/100 Ethernet Fast Ethernet Ethernet PHY Base-T TX PHY MII RMII I2C 56-QFN QFN package family surface mount SMD package exposed pad industrial automation consumer electronics embedded networking 10 Mbps 100 Mbps
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ