Lattice Semiconductor

LC4064C-75T44C - 64-Macrocell 7.5ns CPLD | Lattice

MPN: LC4064C-75T44C ✗ پایان تولید
3.3 V, 2.5 V, and 1.8 V Vdss 44-pin TQFP Package 75 speed grade, 7.5 ns maximum propagation delay Speed Nonvolatile programmable logic configuration Memory
حداقل سفارش: 1 |

LC4064C-75T44C نمای کلی

The Lattice Semiconductor LC4064C-75T44C is an ispMACH 4000C-series CPLD with 64 macrocells, four logic blocks, and a maximum propagation delay of 7.5 ns in a 44-pin TQFP package. It supports in-system programming and is identified as a 3.3 V, 2.5 V, and 1.8 V SuperFAST high-density programmable logic device.

A complex programmable logic device, or CPLD, belongs to the programmable-logic hierarchy that includes FPGAs. Unlike a software-programmed microcontroller, a CPLD stores a defined Boolean logic configuration in nonvolatile configuration memory. The LC4064C combines multiple logic blocks with a programmable interconnect, allowing fixed digital functions such as interface control, address decoding, state sequencing, and glue logic to operate predictably after configuration.

The 64-macrocell architecture provides a practical balance between logic capacity and routing resources for compact control systems. Its 7.5 ns speed grade is suitable for clocked control logic, data acquisition, peripheral interfacing, and general-purpose digital subsystems. In-system programmability allows a board to be configured or updated through the device's programming interface, while the 44-pin TQFP package supports conventional surface-mount assembly.

The device is associated with the Lattice ispMACH 4000C family and supports multiple supply-voltage configurations identified for the LC4064C family. Unlike a microcontroller with a processor core and executable software, this CPLD uses configurable logic blocks and fixed interconnect resources. This architecture can provide deterministic hardware behavior after configuration and can consolidate several discrete gates and counters into one programmable component.

Typical applications include industrial control interfaces, test and measurement equipment, communications link control, embedded data-acquisition systems, power-system sequencing, and compact peripheral adapters. A design can implement parallel data capture, pulse-width generation, protocol framing, and status logic in one device when the required architecture fits the available macrocells and I/O resources.

Design planning should begin with a complete pin assignment and timing review using the Lattice Semiconductor datasheet and the selected design toolchain. The PCB should preserve the device's required programming, configuration, clock, ground, and supply connections, while decoupling and layout should follow the package-specific recommendations. Programming files, pin constraints, timing constraints, and unused-pin treatment must be reviewed before fabrication.

This page organizes the verified device identity, package, programming characteristics, speed grade, and practical design considerations while identifying family-based drop-in alternatives. It also distinguishes the LC4064C from the LC4064V, highlights speed-grade and temperature-suffix trade-offs, and provides comparison points that help engineers determine PCB, timing, and qualification impacts before approving a substitution.

جایگزین‌های drop-in برای LC4064C-75T44C — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LC4064C-75T44C (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Architecture, Speed Grade, Device Type, Configuration Memory, Product Family.

Lattice Semiconductor
Architecture: SuperFAST high-density PLD
مقایسه با LC4064C-75T44C →
Lattice Semiconductor
Architecture: Complex programmable logic device
Speed Grade: 5 ns
Device Type: SuperFast high-density in-system-programmable PLD
مقایسه با LC4064C-75T44C →
Lattice Semiconductor
Architecture: ispMACH 4000 SuperFAST architecture
Speed Grade: -75
مقایسه با LC4064C-75T44C →
Lattice Semiconductor
Configuration Memory: Nonvolatile
Product Family: ispMACH 4000
مقایسه با LC4064C-75T44C →

LC4064C-75T44I

✅ جایگزین مستقیم
Lattice Semiconductor
📦 TQFP-44
Complex Programmable Logic Device (CPLD) · ispMACH 4000C · ispMACH 4000 SuperFAST architecture · 64 macrocells · 168 MHz · -75 · 1.8 V · 3.3 V, 2.5 V, and 1.8 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LC4064C-75TN44C

✅ جایگزین مستقیم
📦 TQFP-44
Same 64-macrocell LC4064C architecture, 7.5 ns speed designation, and 44-pin package; the N suffix changes ordering or qualification attributes rather than the core logic capacity.

📋 جایگزین مرجع (خارج از کاتالوگ)

LC4064C-25T44C

✅ جایگزین مستقیم
Lattice Semiconductor
📦 TQFP-44
Complex Programmable Logic Device (CPLD) · ispMACH 4000C · SuperFAST high-density PLD · 64 macrocells · 2.5 ns · 400 MHz · 30 pins · 44 pins

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LC4064C-10T44C

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 TQFP-44
Same 64-macrocell architecture and 44-pin footprint, but 10 ns speed grade versus 7.5 ns, increasing maximum propagation delay by 2.5 ns or approximately 33%.

📋 جایگزین مرجع (خارج از کاتالوگ)

LC4064V-75T44C

✅ جایگزین مستقیم
Lattice Semiconductor
📦 TQFP-44
Complex programmable logic device (CPLD) · ispMACH 4000 · 64 macro cells · 30 I/O · 3.3 V · 1.8 V, 2.5 V, and 3.3 V · 7.5 ns · 168 MHz

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LC4064C-75T44C حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Complex Programmable Logic Device (CPLD)
Product Family ispMACH 4000C
Macrocell Count 64 macrocells
Logic Block Count 4 logic blocks
Maximum Propagation Delay 7.5 ns
بسته‌بندی 44-pin TQFP
نوع نصب Surface mount
Programmability In-system programmable
Supported Supply Configurations 3.3 V, 2.5 V, and 1.8 V
Internal Supply Voltage Range 1.65 V to 1.95 V
Speed Grade 75 speed grade, 7.5 ns maximum propagation delay
Device Technology SuperFAST high-density PLD
Configuration Memory Nonvolatile programmable logic configuration

راهنمای پیکربندی پین LC4064C-75T44C 44-pin tqfp

پیکربندی پین برای LC4064C-75T44C (پکیج 44-pin tqfp). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 44-pin tqfp برای LC4064C-75T44C

داده پین‌آوت تفصیلی موجود نیست برای LC4064C-75T44C.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LC4064C-75T44C مناسب است برای 6 کاربردs: Industrial Control Interface Logic, Data Acquisition and Signal Conditioning, Communications Link Control, Test and Measurement Equipment, Power Sequencing and Monitoring, Embedded Peripheral Adapter.

🏭

Industrial Control Interface Logic

The LC4064C-75T44C is suitable for consolidating fixed industrial control functions into one programmable device. Its 64 macrocells across four logic blocks can implement state machines, interlocks, command decoding, alarm handling, and discrete I/O buffering without a microcontroller software loop. The 7.5 ns maximum propagation delay supports higher-clock control logic when external setup and hold requirements are met. In-system programming permits board-level configuration during production or field update. For industrial deployment, choose the suffix whose specified temperature range matches the enclosure and verify supply tolerances, input thresholds, and output timing against the Lattice Semiconductor datasheet.

📊

Data Acquisition and Signal Conditioning

The LC4064C can coordinate parallel data acquisition in a compact instrument by generating sample-control signals, multiplexing strobes, counting events, and transferring captured data to a host interface. Four logic blocks and 64 macrocells provide meaningful capacity for finite-state control logic while its 7.5 ns grade can support tightly timed digital paths. The 44-pin TQFP also offers a manageable surface-mount footprint for acquisition boards. Designers should allocate pins for the chosen bus width, verify input timing against the data source, and use the manufacturer pin-description and timing tables to prevent hold-time violations.

🌐

Communications Link Control

LC4064C-75T44C implementations can place framing, byte alignment, timeout detection, and transmitter-enable logic beside a communications transceiver. The device's programmable architecture permits protocol-specific constants to be implemented in hardware while its 64 macrocells support moderately complex control sequences. With a maximum propagation delay of 7.5 ns, the CPLD can support deterministic digital coordination between parallel transceiver logic and external controllers. The system designer must confirm that the selected I/O standard, voltage configuration, clocking method, and timing budget match the transceiver interface before schematic capture.

🔧

Test and Measurement Equipment

In test and measurement equipment, the LC4064C-75T44C can consolidate sequencing, trigger routing, status decoding, and instrument-bus control into a single programmable logic device. Its nonvolatile configuration supports repeatable operation after power-up, and in-system programming simplifies fixture updates when control sequences change. The four-block, 64-macrocell structure is suitable for coordinating measurement sequencing and peripheral registers without loading a general-purpose processor with every low-level transition. Designers should reserve pins for calibration, trigger, and service interfaces and validate worst-case timing over the required operating temperature.

⚡

Power Sequencing and Monitoring

The LC4064C-75T44C can implement a deterministic power-sequence controller that monitors enable inputs, inserts delays between rail transitions, records fault conditions, and issues control signals to regulators or load switches. Its in-system programmability allows sequencing rules to be adapted without changing fixed hardware, while the 7.5 ns grade supports fast decisions around clocked supervisory logic. The 44-pin TQFP provides access to multiple discrete and latch inputs in a compact package. For safety-related or high-availability systems, review watchdog behavior, fail-safe pin states, and single-fault considerations rather than relying on CPLD timing alone.

🔌

Embedded Peripheral Adapter

A compact adapter can use the LC4064C-75T44C to translate between legacy parallel ports, addressable peripherals, and modern serial controllers. Its 64 macrocells can hold address decoding, latch logic, interrupt masking, and data-width conversion, eliminating several discrete logic packages. The 7.5 ns speed class supports demanding clocked interfaces, while the 44-pin TQFP keeps the assembly manageable for embedded controller boards. Designers must verify every signal's voltage level, direction, termination requirement, and timing relationship in the datasheet and then constrain unused pins explicitly in the programming project.

What is the LC4064C-75T44C?
The LC4064C-75T44C is a Lattice Semiconductor ispMACH 4000C complex programmable logic device with 64 macrocells, four logic blocks, and a 7.5 ns maximum propagation delay. According to the Lattice Semiconductor datasheet, it is an in-system-programmable SuperFAST high-density PLD housed in a 44-pin TQFP package.
What is the operating voltage of the LC4064C-75T44C?
The LC4064C family is identified for 3.3 V, 2.5 V, and 1.8 V operation, with an internal supply range of 1.65 V to 1.95 V. According to the Lattice Semiconductor product information, the exact external supply and I/O voltage configuration must be selected from the device's datasheet tables before circuit implementation.
How many logic blocks and macrocells does the LC4064C-75T44C have?
The LC4064C-75T44C provides 64 macrocells distributed across four logic blocks. According to the Lattice Semiconductor device description, this architecture supports combinational and sequential logic, programmable interconnect, and in-system programming in one 44-pin TQFP package.
Where can I download the LC4064C-75T44C datasheet PDF?
The LC4064C-75T44C datasheet is available through the Lattice Semiconductor datasheet listing linked on this page. The document identifies the device as a 64-macrocell, 7.5 ns SuperFAST high-density PLD and should be used to verify pin assignments, electrical limits, timing, and programming requirements before layout or replacement approval.
Where can I find the LC4064C-75T44C pinout?
The LC4064C-75T44C pinout is defined by the 44-pin TQFP package in the Lattice Semiconductor datasheet. Use the package pin-description table and the selected design tool's device information to assign programming, configuration, clock, supply, ground, and user I/O signals before releasing the PCB layout.
Is the LC4064C-75T44C suitable for industrial control systems?
The LC4064C-75T44C can implement deterministic control and interface logic with 64 macrocells and a 7.5 ns propagation delay. Industrial suitability depends on the device's specified temperature grade, operating voltage, and system timing requirements, which should be checked against the Lattice Semiconductor datasheet.
What is the difference between a CPLD and an FPGA?
A CPLD uses a smaller, more structured collection of programmable logic blocks and interconnect resources than an FPGA. The LC4064C-75T44C provides 64 macrocells in four blocks and is configured through nonvolatile programming, making it well suited to compact fixed logic, interface, and control functions.
Can the LC4064C-75T44C be programmed in-system?
Yes, the LC4064C-75T44C supports in-system programming. According to the Lattice Semiconductor datasheet, the device can receive its configuration through the designated programming interface, allowing board-level programming or update without relying on a separate socketed programming cycle.
When should I choose the LC4064C-75T44C over a faster LC4064C grade?
Choose the 7.5 ns LC4064C-75T44C when its timing margin satisfies the design and lower speed is acceptable for cost or availability objectives. A faster LC4064C grade provides less propagation delay, but the required external timing, setup, and hold margins determine whether the extra speed creates engineering value.
What is the best drop-in replacement for the LC4064C-75T44C?
The closest family-based drop-in choices include the LC4064C-75T44I, LC4064C-75TN44C, LC4064C-25T44C, and LC4064C-10T44C when their package pins, voltage configuration, temperature grade, and timing meet the system requirements. Confirm every operating condition in the manufacturer datasheet because suffix changes can affect qualification or timing.
Can LC4064C-75TN44C replace LC4064C-75T44C?
LC4064C-75TN44C is a closely related family member that retains the 7.5 ns speed designation and 44-pin package format. It is a potential drop-in candidate, but the N suffix and any temperature, lead-free, or ordering differences must be checked in the Lattice Semiconductor datasheet before substitution.
LC4064C-75T44C vs LC4064V-75T44C — which is better?
The LC4064C-75T44C belongs to the LC4064C family, while the LC4064V-75T44C is a distinct LC4064V family member. Both are identified with a 7.5 ns speed designation and 44-pin package format, but voltage options, device features, and pin-level behavior must be compared before treating the V device as a drop-in replacement.
Is there a Lattice equivalent with a different speed grade for the LC4064C-75T44C?
The LC4064C-25T44C and LC4064C-10T44C provide lower speed grades in the same 44-pin family format. Their nominal propagation delays are higher than the LC4064C-75T44C's 7.5 ns maximum, so they should be selected only when the slower timing still meets all system timing constraints.
Where can I buy the LC4064C-75T44C and check its lead time?
Use the Request a Quote form on this page to request current availability, lot conditions, and lead time for the exact LC4064C-75T44C MPN. The device is an older Lattice Semiconductor CPLD, so package, speed, temperature suffix, and quantity should be confirmed in the quotation rather than inferred from a generic family listing.
What is the price and stock status of LC4064C-75T44C?
Current price and stock status for the exact LC4064C-75T44C MPN should be obtained through the Request a Quote form on this page. Because this older device may have fragmented inventory and package-specific availability, confirm the manufacturer suffix, tray or reel form, quantity, and delivery requirements in the quote.

داده‌های مرجع مهندسی برای LC4064C-75T44C — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LC4064C-75T44C when a system needs a 64-macrocell CPLD with four logic blocks, in-system programming, and a 7.5 ns propagation-delay grade in a 44-pin TQFP. Select LC4064C-75T44I when the commercial-temperature target is unsuitable but the industrial suffix meets the deployment requirements. LC4064C-75TN44C is appropriate when its suffix-specific ordering and qualification attributes satisfy the design without changing the core speed grade. Use LC4064C-10T44C only when its slower timing still meets every clock-domain constraint; the 10 ns grade provides less margin than the target. LC4064C-25T44C is best reserved for slower interfaces where its 25 ns delay remains acceptable. LC4064V-75T44C shares the 44-pin format and 7.5 ns speed designation but belongs to a different voltage family, so verify supply options and pin-level behavior before treating it as a drop-in replacement.

مقایسه با جایگزین‌ها

پارامتر این محصول LC4064C-75T44I LC4064C-75TN44C LC4064C-25T44C LC4064C-10T44C LC4064V-75T44C
Brand Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation
Package TQFP-44 TQFP-44 - same TQFP-44 - same TQFP-44 - same TQFP-44 - same TQFP-44 - same
Device Type CPLD CPLD CPLD CPLD CPLD CPLD
Maximum Propagation Delay 7.5 ns 7.5 ns 7.5 ns 25 ns 10 ns 7.5 ns
Speed Grade 75 speed grade 75 speed grade 75 speed grade 25 speed grade 10 speed grade 75 speed grade
In-System Programming Supported Supported Supported Supported Supported Supported

تفاوت‌های کلیدی

  • Balances logic capacity with a compact 44-pin package (در مقابلLC4064V-75T44C)
  • Same timing grade as the closest LC4064C industrial suffix (در مقابلLC4064C-75T44I)
  • Lower propagation delay than slower speed-grade alternatives (در مقابلLC4064C-25T44C)
  • Faster timing than the 10 ns family option (در مقابلLC4064C-10T44C)

یادداشت‌های طراحی

Do not approve a suffix-only replacement without checking the complete order code. For LC4064C-75T44C, the speed grade, package, temperature suffix, and lead or ordering attributes can change across otherwise similar MPNs. Compare the datasheet ordering table, pin table, voltage limits, timing limits, and temperature grade. After substitution, rerun the complete CPLD design compile and timing analysis because changes in grade or family can alter timing constraints even when the physical package remains the same.

Route programming signals, configuration control, clock inputs, supply pins, and ground pins according to the Lattice Semiconductor package and reference-design guidance. Place input and output decoupling capacitors close to their associated supply and ground pins, provide adequate return paths for switching currents, and keep sensitive timing or analog-adjacent signals away from noisy programming or power-conversion nodes. Treat every TQFP pad and exposed thermal requirement shown in the package drawing as a physical design constraint.

Establish input and output timing constraints from the actual external devices rather than relying only on the CPLD's 7.5 ns propagation-delay value. Account for clock skew, setup time, hold time, output loading, and board-level delay. For a replacement using the 10 ns or 25 ns grade, recalculate the complete path and preserve adequate margin. For new PCB designs, assign unused pins in the design project and configure them according to the manufacturer's recommendations.

Design the supply network for the exact voltage mode and current required by the selected operating configuration. Decoupling requirements and current consumption can vary with device family, speed grade, and I/O activity, so use the relevant datasheet tables rather than transferring a generic CPLD power layout. Verify power-up ordering if multiple rails control the design, and confirm that the CPLD's programming interface remains valid throughout the system's reset and initialization sequence.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The available product pages do not provide a definitive extract for the target's RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is a general-purpose CPLD rather than an automotive-qualified device.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LC4064C-75T44C datasheet LC4064C-75T44C specifications LC4064C-75T44C pinout LC4064C-75T44C datasheet pdf LC4064C-75T44C equivalent LC4064C-75T44C replacement LC4064C-75T44C cross reference LC4064C-75T44C price LC4064C-75T44C stock Lattice LC4064C-75T44C LC4064C-75T44C TQFP-44 footprint LC4064C-75T44C vs LC4064V-75T44C

قطعات و اصطلاحات مرتبط

Lattice Semiconductor Corporation LC4064C-75T44C LC4064C-75T44I LC4064C-75TN44C LC4064C-25T44C LC4064C-10T44C LC4064V-75T44C ispMACH 4000C Complex Programmable Logic Device CPLD FPGA programmable logic nonvolatile configuration memory macrocells logic blocks in-system programming SuperFAST high-density PLD TQFP-44 TQFP package family surface-mount package maximum propagation delay speed grade 3.3 V 2.5 V 1.8 V industrial control
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ