Lattice Semiconductor

LC4384V-5T176I - 176-TQFP SuperFAST CPLD | Lattice

MPN: LC4384V-5T176I ✓ فعال
3.3 V, 2.5 V, and 1.8 V Vdss TQFP, gull-wing terminals Package
حداقل سفارش: 1 |

LC4384V-5T176I نمای کلی

The Lattice Semiconductor LC4384V-5T176I is an in-system-programmable SuperFAST high-density complex programmable logic device, or CPLD, with 176 terminals in a 24 x 24 mm TQFP package. It supports internal supply rails of 3.3 V, 2.5 V, and 1.8 V and is specified for a junction-temperature operating range of -40 °C to 105 °C.

A CPLD is a programmable logic device that combines a relatively large number of programmable logic blocks with a deterministic interconnect structure. The term complex programmable logic device places the LC4384V-5T176I in the programmable-logic hierarchy, where it sits between simpler fixed-function logic and highly parallel FPGAs. This architecture is useful when a design needs reconfigurable combinational and sequential logic, repeatable in-system programming, and a stable PCB implementation without the resource demands of a large FPGA.

The LC4384V-5T176I combines three principal capabilities: 176 physical terminals, three supported internal supply levels, and in-system programmability. Its 176-terminal package provides a high pin count for external interfaces, while the 0.5 mm terminal pitch supports dense surface-mount layouts. The -40 °C to 105 °C junction-temperature range makes the device suitable for industrial equipment, embedded control systems, communications equipment, and test systems that operate beyond typical consumer-temperature conditions.

The LC4384V belongs to the Lattice ispMACH 4000 product family, described as a blend of the ispLSI 2000 and ispMACH 4A architectures. This mixed architecture combines substantial logic capacity with a fast interconnect and in-system configuration capability. Because programming can be performed while the device remains in the target circuit, a board can be programmed or reconfigured without removing the CPLD from its socket or assembly.

Typical uses include bus-interface logic, industrial data-acquisition systems, communications line cards, embedded control modules, and instrumentation. The device is also appropriate for designs requiring multiple logic functions that would otherwise occupy several conventional programmable logic devices. Consolidating such functions into one CPLD can simplify board partitioning and provide a uniform configuration method across related products.

PCB design should account for the 176-pin TQFP footprint, 0.5 mm pitch, and required power and ground connectivity. Programming signals, configuration control, I/O standards, and supply decoupling must follow the manufacturer datasheet. Because package-ball or terminal assignments determine legal replacement behavior, verify the complete pinout and electrical limits against the exact ordering code before production release.

This product record combines the verified package, voltage, programming, and temperature characteristics with application guidance, same-footprint family alternatives, comparison parameters, and practical design considerations. It is intended to support component selection, footprint verification, sourcing review, and hardware planning rather than to replace the complete manufacturer datasheet.

جایگزین‌های drop-in برای LC4384V-5T176I — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

LC4384V-5T176C

✅ جایگزین مستقیم
Lattice Semiconductor
📦 TQFP-176 (24 x 24 mm)
Complex programmable logic device (CPLD) · ispMACH 4000 · 384 macrocells · 400 MHz · 5 ns · 3.3 V · 144 I/O pins · 176 pins

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LC4384V-5TN176C

✅ جایگزین مستقیم
📦 TQFP-176 (24 x 24 mm)
Retains the 176-terminal package and -5 speed designation; the TN ordering suffix replaces the target's T176 ordering form, with a 0-pin package difference.

📋 جایگزین مرجع (خارج از کاتالوگ)

LC4384V-5TN176I

✅ جایگزین مستقیم
📦 TQFP-176 (24 x 24 mm)
Retains the -5 speed grade, industrial suffix, and 176-terminal footprint; the TN ordering suffix differs from T176, with a 0-pin package difference.

📋 جایگزین مرجع (خارج از کاتالوگ)

LC4384B-5T176I

✅ جایگزین مستقیم
Lattice Semiconductor
📦 TQFP-176 (24 x 24 mm)
In-System Programmable SuperFAST High-Density PLD · ispMACH 4000B CPLD · 384 macrocells · 5 ns · 128 I/O pins · 2.3 V to 2.7 V · 1.8 V, 2.5 V, and 3.3 V · 176-lead TQFP

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LC4384C-5TN176I

✅ جایگزین مستقیم
📦 TQFP-176 (24 x 24 mm)
Retains the -5 speed designation, industrial suffix, and 176-terminal package; the C-versus-V device variant changes the internal design designation, with a 0-pin package difference.

📋 جایگزین مرجع (خارج از کاتالوگ)

LC4384V-5T176I حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Complex Programmable Logic Device (CPLD)
Architecture ispMACH 4000 family
Programmability In-system programmable
Internal Supply Options 3.3 V, 2.5 V, and 1.8 V
Supply Voltage Range 3.0 V to 3.6 V
Number of Terminals 176 terminals
Package Type TQFP, gull-wing terminals
Package Body Size 24 x 24 mm
Terminal Pitch 0.5 mm
Package Shape Square
نوع نصب Surface mount
دمای اتصال کاری -40 °C to 105 °C
Logic Family SuperFAST high-density PLD

راهنمای پیکربندی پین LC4384V-5T176I square

پیکربندی پین برای LC4384V-5T176I (پکیج square). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج square برای LC4384V-5T176I

داده پین‌آوت تفصیلی موجود نیست برای LC4384V-5T176I.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LC4384V-5T176I مناسب است برای 6 کاربردs: Industrial Data-Acquisition Controller, Communications Line-Card Interface, Embedded Control and Sequencing, Test and Measurement Front End, Programmable Interface Consolidation, Aerospace and Defense Support Logic.

🏭

Industrial Data-Acquisition Controller

The LC4384V-5T176I fits industrial data-acquisition equipment that requires substantial digital I/O, deterministic reconfigurable logic, and operation across a -40 °C to 105 °C junction-temperature range. Its 176 terminals can accommodate parallel sensor inputs, sample-control signals, status indicators, and external interface logic within one programmable device. The 3.3 V, 2.5 V, and 1.8 V internal-supply options also support mixed-voltage system architectures when each supply domain is configured according to the manufacturer datasheet. In-system programmability allows one board design to support multiple sensor configurations, calibration variants, or field upgrades. The principal implementation consideration is the 24 x 24 mm TQFP footprint and its 0.5 mm terminal pitch, which require controlled trace widths, spacing, vias, and assembly capability.

🌐

Communications Line-Card Interface

The LC4384V-5T176I is appropriate for communications line-card logic where parallel buses, framing signals, timing controls, and status paths require more connectivity than a small CPLD can provide. Its 176-terminal package gives designers access to a broad I/O budget, while the in-system-programmable architecture supports field configuration and product-family variations. The three supported internal supplies—3.3 V, 2.5 V, and 1.8 V—can accommodate systems built around multiple logic voltage domains, subject to the valid combinations and I/O rules in the manufacturer datasheet. The -40 °C to 105 °C junction-temperature range also suits industrial network equipment. Designers should preserve the recommended power and ground distribution, place decoupling close to supply terminals, and validate all timing-sensitive interfaces with the device timing models.

⚙️

Embedded Control and Sequencing

The LC4384V-5T176I can serve as a reconfigurable control, sequencing, and bus-decoding element in an embedded industrial system. Its high terminal count allows dedicated logic for sensor selection, motor or actuator sequencing, interlocks, diagnostic reporting, and communications handshakes without dividing the design across several fixed-function devices. The ispMACH 4000 family's deterministic interconnect is useful when control behavior must remain predictable across temperature and supply conditions. In-system programming is valuable during commissioning because the same hardware can load alternate control sequences for different production variants. For a motor-adjacent or high-energy environment, isolate the CPLD from transients, provide clean supplies, and avoid relying on the -40 °C to 105 °C junction specification without checking enclosure temperature and power dissipation.

🔧

Test and Measurement Front End

The LC4384V-5T176I is useful in test and measurement front ends where instrument control, trigger routing, status sequencing, and data-format conversion require programmable logic in a compact single package. The 176 terminals allow a substantial number of external control points to be consolidated around one device, and in-system programmability lets a product adapt to different test sequences without changing the PCB. The device's industrial junction-temperature range supports controlled laboratory and industrial test systems, while its 3.3 V, 2.5 V, and 1.8 V internal supply options simplify multi-rail instrumentation. Designers should isolate high-voltage or high-current test-node interfaces from the logic device, use the manufacturer pinout to assign sensitive signals, and validate timing margins across all required temperature and supply corners.

🖥️

Programmable Interface Consolidation

The LC4384V-5T176I is well suited to consolidating several legacy programmable-logic functions onto one board. Parallel interfaces, interrupt logic, FIFO-control state machines, address decoding, and peripheral-select functions can be implemented within one physically integrated CPLD, reducing component count and simplifying configuration management. The 176-terminal TQFP provides enough external connectivity for a substantial interface consolidation while keeping the design in a surface-mount package. In-system programmability permits controlled configuration during production or maintenance, provided the board provides the required programming interface and reset behavior. The key trade-off is routing complexity: a 0.5 mm terminal pitch in a 24 x 24 mm body requires careful fanout, adequate solder-mask and paste design, and an assembly process capable of handling fine-pitch gull-wing terminals.

✈️

Aerospace and Defense Support Logic

The LC4384V-5T176I can support non-safety-critical control and interface functions in aerospace, defense, and ruggedized systems where long-term supply planning and environmental qualification are important. Its -40 °C to 105 °C junction-temperature range, in-system programming, and 176-terminal package make it useful for centralized logic behind protected communication, navigation, or test interfaces. The device should not be treated as automatically qualified for a flight-critical role because the exact ordering code's AEC-Q100 status and program-specific screening requirements are not established by the available manufacturer description. Engineers must verify radiation, vibration, temperature, cybersecurity, and obsolescence requirements separately. Board-level design should include robust decoupling, controlled ground returns, transient protection, and configuration security appropriate to the deployed environment.

خلاصه محصولات پیشنهادی

LC4384V-5TN176I Same-family in-system-programmable CPLD candidate استفاده‌شده در: Industrial Data-Acquisition Controller, Embedded Control and Sequencing, Test and Measurement Front End, Aerospace and Defense Support Logic LC4384B-5T176I Lattice Semiconductor استفاده‌شده در: Industrial Data-Acquisition Controller, Programmable Interface Consolidation LC4384V-5T176C Lattice Semiconductor استفاده‌شده در: Communications Line-Card Interface, Test and Measurement Front End, Aerospace and Defense Support Logic LC4384V-5TN176C Same-family alternate ordering option استفاده‌شده در: Communications Line-Card Interface LC4384C-5TN176I Same-family control-logic candidate استفاده‌شده در: Embedded Control and Sequencing, Programmable Interface Consolidation
What is the LC4384V-5T176I?
The LC4384V-5T176I is a Lattice Semiconductor in-system-programmable SuperFAST high-density CPLD in a 176-terminal TQFP package. It supports 3.3 V, 2.5 V, and 1.8 V internal supplies and is specified for a -40 °C to 105 °C junction-temperature range. According to the manufacturer datasheet, the device belongs to the ispMACH 4000 family, which combines ispLSI 2000 and ispMACH 4A architectural characteristics.
What package does the LC4384V-5T176I use?
The LC4384V-5T176I uses a 176-terminal TQFP package measuring 24 x 24 mm with a 0.5 mm terminal pitch. The package uses gull-wing surface-mount terminals and a square body. Because the device has 176 terminals, it requires a fine-pitch PCB footprint with careful routing between pads. Confirm the exact land pattern and terminal numbering in the manufacturer pinout before placing the footprint in the CAD library.
Where can I download the LC4384V-5T176I datasheet PDF?
The LC4384V-5T176I datasheet PDF is available through the Lattice Semiconductor device documentation listed on this page. The indexed document identifies the device as a 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD. Use the manufacturer datasheet for the authoritative pin description, supply limits, timing tables, configuration procedure, and programming requirements before beginning PCB or firmware development.
What is the operating temperature range of the LC4384V-5T176I?
The LC4384V-5T176I is specified for a junction-temperature operating range of -40 °C to 105 °C. This range supports industrial, communications, instrumentation, and embedded-control environments where the junction temperature may rise above the ambient enclosure temperature. The 85 °C span does not by itself define the maximum ambient temperature; PCB construction, airflow, neighboring components, and the device's power dissipation must be considered when calculating junction temperature.
What supply voltages are supported by the LC4384V-5T176I?
The LC4384V-5T176I supports 3.3 V, 2.5 V, and 1.8 V internal operating supplies. A device-level listing identifies a 3.0 V to 3.6 V internal supply range for the 3.3 V configuration. The manufacturer datasheet should be used to distinguish core, configuration, and I/O supply domains and to determine which voltage combinations are valid for a particular design. Supply sequencing and decoupling requirements must also follow the datasheet.
Is the LC4384V-5T176I in-system programmable?
Yes, the LC4384V-5T176I is in-system programmable. This capability allows the CPLD to receive a configuration while it is connected in the target circuit, which can simplify manufacturing, field updates, and prototype rework. In-system programming does not remove the need for a valid configuration and correct programming interface. Follow the manufacturer programming and configuration sequence, including reset behavior, clock requirements, and specified signal levels.
Is the LC4384V-5T176I suitable for industrial control systems?
The LC4384V-5T176I is suitable for many industrial control applications because its specified junction-temperature range extends from -40 °C to 105 °C. Its 176-terminal package also provides substantial I/O connectivity for sensors, actuators, interlocks, and communications. Suitability still depends on the specific I/O standards, system voltage, timing requirements, environmental exposure, and AEC-Q100 status. Confirm those details in the manufacturer datasheet before releasing an industrial design.
What is the best drop-in replacement for the LC4384V-5T176I?
The closest documented replacement candidates are LC4384V-5T176C, LC4384V-5TN176C, LC4384V-5TN176I, LC4384B-5T176I, and LC4384C-5TN176I. These are members of the same Lattice family, but suffix changes can alter speed, temperature grade, or device configuration. A true drop-in decision requires exact package dimensions, terminal assignment, configuration compatibility, supply requirements, and timing equivalence. Use the Request a Quote form on this page to identify the current availability of each candidate.
Can LC4384V-5T176C replace LC4384V-5T176I?
LC4384V-5T176C is a same-family candidate for LC4384V-5T176I because both use the 176-terminal ordering format and retain the -5 speed designation. The temperature suffix differs, with the target designated I and the candidate designated C. That grade difference can affect permissible operating conditions, so LC4384V-5T176C is not automatically acceptable when the target circuit must operate from -40 °C to 105 °C. Verify the commercial-grade limits before substitution.
What is the difference between LC4384V-5T176I and LC4384B-5T176I?
LC4384V-5T176I and LC4384B-5T176I are both Lattice 176-terminal CPLD ordering variants with the same -5 speed designation and industrial suffix. Their architecture or performance variant is identified by the B-versus-V designator, so they should not be treated as automatically interchangeable. The manufacturer ordering guide and device datasheets must confirm equal macrocell resources, I/O behavior, timing, supply configuration, and terminal mapping. This candidate is listed for engineering review rather than unconditional substitution.
When should I choose the LC4384V-5T176I over a lower-pin-count CPLD?
Choose the LC4384V-5T176I when the design requires its 176 terminals, in-system programmability, and -40 °C to 105 °C junction-temperature specification. A lower-pin-count CPLD may be preferable when the interface fits within fewer terminals, board area is constrained, or the required logic resources are lower. The target's 24 x 24 mm package and 0.5 mm pitch add routing and assembly complexity, so the additional connectivity should be justified by real interface requirements rather than assumed future expansion.
Is the LC4384V-5T176I suitable for a communications interface?
The LC4384V-5T176I is suitable for communications-interface logic when its timing, I/O standards, and supply requirements match the design. Its 176 terminals can support parallel data paths, control signals, and multiple interface domains, while in-system programmability simplifies product variations. The manufacturer's datasheet is the controlling source for I/O voltage standards, clock limitations, and timing. Use the exact device datasheet and design rules rather than treating the generic CPLD family description as a complete interface specification.
Where can I find the LC4384V-5T176I pinout?
The LC4384V-5T176I pinout is documented in the manufacturer datasheet's terminal-description and pin-assignment sections. The package is a 176-terminal TQFP with a 0.5 mm pitch and a 24 x 24 mm body. Use the pin table to identify power, ground, configuration, programming, clock, and user I/O terminals rather than inferring assignments from another family member. A complete 176-terminal list is not reproduced here, and the CAD land pattern should be cross-checked against the package drawing.
How do I request a quote for the LC4384V-5T176I?
Use the Request a Quote form on this page to request the current commercial terms for the LC4384V-5T176I. Include the required quantity, target package suffix, acceptable delivery date, and whether programming or traceability support is needed. The form provides a direct route for checking availability, lead time, and a current quotation without relying on a static price that may no longer reflect the market. Avoid substituting a different Lattice suffix unless its electrical and pin compatibility has been verified.
What are the key specifications of the LC4384V-5T176I that engineers should know?
The key LC4384V-5T176I specifications are its 176-terminal TQFP package, 24 x 24 mm body, 0.5 mm pitch, 3.3 V, 2.5 V, and 1.8 V internal supplies, and -40 °C to 105 °C junction-temperature range. It is an in-system-programmable member of the Lattice ispMACH 4000 SuperFAST CPLD family. The datasheet should be consulted for macrocell count, I/O standards, timing, configuration details, absolute maximum ratings, and programming requirements.
What can replace the LC4384V-5T176I?
Potential replacements include LC4384V-5T176C, LC4384V-5TN176C, LC4384V-5TN176I, LC4384B-5T176I, and LC4384C-5TN176I, all identified through Lattice-family cross-reference results. Each candidate requires an engineering equivalence review rather than an automatic board substitution. Check package dimensions, pin assignments, supported supplies, timing grade, temperature range, configuration memory, and system behavior. The Request a Quote form can establish which candidate variants are currently obtainable.

داده‌های مرجع مهندسی برای LC4384V-5T176I — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LC4384V-5T176I when the design needs a 176-terminal, in-system-programmable SuperFAST CPLD and must operate across the specified -40 °C to 105 °C junction-temperature range. Its 3.3 V, 2.5 V, and 1.8 V supply options make it useful for multi-rail industrial, communications, test, and embedded-control equipment. LC4384V-5T176C may be suitable when commercial-grade limits are sufficient, while LC4384V-5TN176I is the closest same-family ordering candidate for a configuration requiring that TN form. Evaluate LC4384B-5T176I and LC4384C-5TN176I as same-footprint family alternatives only after checking device architecture, resources, timing, supply domains, and pin behavior. No alternative should be approved solely from package similarity. Confirm the exact configuration file, programming sequence, thermal margin, and assembly capability before releasing a replacement to production.

مقایسه با جایگزین‌ها

پارامتر این محصول LC4384V-5T176C LC4384V-5TN176C LC4384V-5TN176I LC4384B-5T176I LC4384C-5TN176I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package TQFP-176 (24 x 24 mm) TQFP-176 (24 x 24 mm) TQFP-176 (24 x 24 mm) TQFP-176 (24 x 24 mm) TQFP-176 (24 x 24 mm) TQFP-176 (24 x 24 mm)
Terminal Count 176 terminals 176 terminals 176 terminals 176 terminals 176 terminals 176 terminals
Terminal Pitch 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm
Package Body Size 24 x 24 mm 24 x 24 mm 24 x 24 mm 24 x 24 mm 24 x 24 mm 24 x 24 mm

تفاوت‌های کلیدی

  • High terminal count for consolidated programmable logic (در مقابلLC4384V-5T176C)
  • Industrial-grade junction-temperature specification (در مقابلLC4384V-5T176C)
  • Three internal supply options (در مقابلLC4384B-5T176I)
  • Fine-pitch surface-mount integration (در مقابلLC4384C-5TN176I)

یادداشت‌های طراحی

Use the manufacturer land pattern for the 24 x 24 mm TQFP with 0.5 mm pitch rather than generating a footprint from terminal count alone. Check pad length, pad width, solder-mask expansion, paste volume, and courtyard against the package drawing. Because this is a 176-terminal gull-wing package, fanout escape routing, paste consistency, and component placement tolerances can dominate assembly yield. Confirm terminal-one orientation against both the footprint and the PCB silkscreen before releasing artwork.

Plan the 3.3 V, 2.5 V, and 1.8 V internal-supply architecture before assigning I/O standards. The manufacturer datasheet identifies all three supply options, but it does not make every voltage combination valid for every interface. Keep the selected supply and ground terminals on the shortest possible paths, distribute them through multiple terminals where recommended, and place local high-frequency decoupling immediately adjacent to the device. Include adequate bulk capacitance at the board level and verify startup, reset, and configuration behavior in hardware.

Treat configuration, programming, clock, and high-speed user interfaces as separate classes of nets during layout. Keep programming and configuration traces away from sensitive analog or high-speed inputs where practical, provide continuous ground references beneath critical routes, and avoid routing high-current or switching signals between the device's supply and ground pins. Use the manufacturer's timing and I/O guidance to determine whether series termination or other edge-rate controls are required; the package pitch alone is not sufficient to guarantee signal integrity.

Do not treat a shared family suffix as proof of complete interchangeability. Before substituting LC4384V-5T176C, LC4384V-5TN176C, LC4384V-5TN176I, LC4384B-5T176I, or LC4384C-5TN176I, verify terminal assignments, timing grade, temperature limits, valid supply combinations, configuration memory, I/O standards, and power behavior. In particular, a nominal pin-compatible footprint does not guarantee that an existing bitstream can be used without recompilation or board changes.

Calculate the device's junction temperature from actual power consumption, PCB copper area, airflow, and ambient temperature. The -40 °C to 105 °C specification applies to the junction and is not an ambient-temperature guarantee. Preserve manufacturer-recommended ground and power-plane connections, avoid enclosing the device in an unventilated thermal pocket, and distribute heat across the 24 x 24 mm package when practical. Recheck the operating margin at the highest expected ambient temperature and during in-system programming or reconfiguration.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The verified manufacturer and distributor descriptions identify the device as an industrial-temperature Lattice SuperFAST CPLD but do not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

تاریخ تأیید داده‌ها: 2026-11-19 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

lattice lc4384v LC4384V-5T176I datasheet LC4384V-5T176I datasheet pdf LC4384V-5T176I pinout LC4384V-5T176I equivalent LC4384V-5T176I replacement LC4384V-5T176I cross reference LC4384V-5T176I footprint LC4384V-5T176I price LC4384V-5T176I stock LC4384V-5T176I vs LC4384V-5T176C LC4384V 176 TQFP CPLD LC4384V in-system programmable CPLD LC4384V industrial control application

قطعات و اصطلاحات مرتبط

Lattice Semiconductor LC4384V-5T176I LC4384V-5T176C LC4384V-5TN176C LC4384V-5TN176I LC4384B-5T176I LC4384C-5TN176I ispMACH 4000 ispLSI 2000 ispMACH 4A Complex Programmable Logic Device CPLD programmable logic device FPGA and CPLD semiconductor SuperFAST in-system programmability TQFP-176 TQFP package family gull-wing surface mount SMD 0.5 mm terminal pitch 3.3 V supply 2.5 V supply 1.8 V supply industrial control communications line card test and measurement embedded control RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ