LC4384V-5T176I - 176-TQFP SuperFAST CPLD | Lattice
MPN: LC4384V-5T176I ✓ ActiveLC4384V-5T176I Overview
A CPLD is a programmable logic device that combines a relatively large number of programmable logic blocks with a deterministic interconnect structure. The term complex programmable logic device places the LC4384V-5T176I in the programmable-logic hierarchy, where it sits between simpler fixed-function logic and highly parallel FPGAs. This architecture is useful when a design needs reconfigurable combinational and sequential logic, repeatable in-system programming, and a stable PCB implementation without the resource demands of a large FPGA.
The LC4384V-5T176I combines three principal capabilities: 176 physical terminals, three supported internal supply levels, and in-system programmability. Its 176-terminal package provides a high pin count for external interfaces, while the 0.5 mm terminal pitch supports dense surface-mount layouts. The -40 °C to 105 °C junction-temperature range makes the device suitable for industrial equipment, embedded control systems, communications equipment, and test systems that operate beyond typical consumer-temperature conditions.
The LC4384V belongs to the Lattice ispMACH 4000 product family, described as a blend of the ispLSI 2000 and ispMACH 4A architectures. This mixed architecture combines substantial logic capacity with a fast interconnect and in-system configuration capability. Because programming can be performed while the device remains in the target circuit, a board can be programmed or reconfigured without removing the CPLD from its socket or assembly.
Typical uses include bus-interface logic, industrial data-acquisition systems, communications line cards, embedded control modules, and instrumentation. The device is also appropriate for designs requiring multiple logic functions that would otherwise occupy several conventional programmable logic devices. Consolidating such functions into one CPLD can simplify board partitioning and provide a uniform configuration method across related products.
PCB design should account for the 176-pin TQFP footprint, 0.5 mm pitch, and required power and ground connectivity. Programming signals, configuration control, I/O standards, and supply decoupling must follow the manufacturer datasheet. Because package-ball or terminal assignments determine legal replacement behavior, verify the complete pinout and electrical limits against the exact ordering code before production release.
This product record combines the verified package, voltage, programming, and temperature characteristics with application guidance, same-footprint family alternatives, comparison parameters, and practical design considerations. It is intended to support component selection, footprint verification, sourcing review, and hardware planning rather than to replace the complete manufacturer datasheet.
Drop-in alternatives for LC4384V-5T176I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
LC4384V-5T176C
✅ Drop-InContact for price
View Datasheet →LC4384V-5TN176C
✅ Drop-In📋 Reference alternative (not in catalog)
LC4384V-5TN176I
✅ Drop-In📋 Reference alternative (not in catalog)
LC4384B-5T176I
✅ Drop-InContact for price
View Datasheet →LC4384C-5TN176I
✅ Drop-In📋 Reference alternative (not in catalog)
LC4384V-5T176I Maximum Ratings & Electrical Characteristics
| Device Type | Complex Programmable Logic Device (CPLD) |
| Architecture | ispMACH 4000 family |
| Programmability | In-system programmable |
| Internal Supply Options | 3.3 V, 2.5 V, and 1.8 V |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Number of Terminals | 176 terminals |
| Package Type | TQFP, gull-wing terminals |
| Package Body Size | 24 x 24 mm |
| Terminal Pitch | 0.5 mm |
| Package Shape | Square |
| Mounting Type | Surface mount |
| Operating Junction Temperature | -40 °C to 105 °C |
| Logic Family | SuperFAST high-density PLD |
LC4384V-5T176I square Pin Configuration Guide
Pin configuration for LC4384V-5T176I (square package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for LC4384V-5T176I.
Refer to the datasheet for full pin configuration.
Typical Applications
LC4384V-5T176I is suitable for 6 applications: Industrial Data-Acquisition Controller, Communications Line-Card Interface, Embedded Control and Sequencing, Test and Measurement Front End, Programmable Interface Consolidation, Aerospace and Defense Support Logic.
Industrial Data-Acquisition Controller
The LC4384V-5T176I fits industrial data-acquisition equipment that requires substantial digital I/O, deterministic reconfigurable logic, and operation across a -40 °C to 105 °C junction-temperature range. Its 176 terminals can accommodate parallel sensor inputs, sample-control signals, status indicators, and external interface logic within one programmable device. The 3.3 V, 2.5 V, and 1.8 V internal-supply options also support mixed-voltage system architectures when each supply domain is configured according to the manufacturer datasheet. In-system programmability allows one board design to support multiple sensor configurations, calibration variants, or field upgrades. The principal implementation consideration is the 24 x 24 mm TQFP footprint and its 0.5 mm terminal pitch, which require controlled trace widths, spacing, vias, and assembly capability.
Recommended
Communications Line-Card Interface
The LC4384V-5T176I is appropriate for communications line-card logic where parallel buses, framing signals, timing controls, and status paths require more connectivity than a small CPLD can provide. Its 176-terminal package gives designers access to a broad I/O budget, while the in-system-programmable architecture supports field configuration and product-family variations. The three supported internal supplies—3.3 V, 2.5 V, and 1.8 V—can accommodate systems built around multiple logic voltage domains, subject to the valid combinations and I/O rules in the manufacturer datasheet. The -40 °C to 105 °C junction-temperature range also suits industrial network equipment. Designers should preserve the recommended power and ground distribution, place decoupling close to supply terminals, and validate all timing-sensitive interfaces with the device timing models.
Recommended
Embedded Control and Sequencing
The LC4384V-5T176I can serve as a reconfigurable control, sequencing, and bus-decoding element in an embedded industrial system. Its high terminal count allows dedicated logic for sensor selection, motor or actuator sequencing, interlocks, diagnostic reporting, and communications handshakes without dividing the design across several fixed-function devices. The ispMACH 4000 family's deterministic interconnect is useful when control behavior must remain predictable across temperature and supply conditions. In-system programming is valuable during commissioning because the same hardware can load alternate control sequences for different production variants. For a motor-adjacent or high-energy environment, isolate the CPLD from transients, provide clean supplies, and avoid relying on the -40 °C to 105 °C junction specification without checking enclosure temperature and power dissipation.
Recommended
Test and Measurement Front End
The LC4384V-5T176I is useful in test and measurement front ends where instrument control, trigger routing, status sequencing, and data-format conversion require programmable logic in a compact single package. The 176 terminals allow a substantial number of external control points to be consolidated around one device, and in-system programmability lets a product adapt to different test sequences without changing the PCB. The device's industrial junction-temperature range supports controlled laboratory and industrial test systems, while its 3.3 V, 2.5 V, and 1.8 V internal supply options simplify multi-rail instrumentation. Designers should isolate high-voltage or high-current test-node interfaces from the logic device, use the manufacturer pinout to assign sensitive signals, and validate timing margins across all required temperature and supply corners.
Recommended
Programmable Interface Consolidation
The LC4384V-5T176I is well suited to consolidating several legacy programmable-logic functions onto one board. Parallel interfaces, interrupt logic, FIFO-control state machines, address decoding, and peripheral-select functions can be implemented within one physically integrated CPLD, reducing component count and simplifying configuration management. The 176-terminal TQFP provides enough external connectivity for a substantial interface consolidation while keeping the design in a surface-mount package. In-system programmability permits controlled configuration during production or maintenance, provided the board provides the required programming interface and reset behavior. The key trade-off is routing complexity: a 0.5 mm terminal pitch in a 24 x 24 mm body requires careful fanout, adequate solder-mask and paste design, and an assembly process capable of handling fine-pitch gull-wing terminals.
Recommended
Aerospace and Defense Support Logic
The LC4384V-5T176I can support non-safety-critical control and interface functions in aerospace, defense, and ruggedized systems where long-term supply planning and environmental qualification are important. Its -40 °C to 105 °C junction-temperature range, in-system programming, and 176-terminal package make it useful for centralized logic behind protected communication, navigation, or test interfaces. The device should not be treated as automatically qualified for a flight-critical role because the exact ordering code's AEC-Q100 status and program-specific screening requirements are not established by the available manufacturer description. Engineers must verify radiation, vibration, temperature, cybersecurity, and obsolescence requirements separately. Board-level design should include robust decoupling, controlled ground returns, transient protection, and configuration security appropriate to the deployed environment.
Recommended
Recommended Products Summary
Engineering reference data for LC4384V-5T176I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | LC4384V-5T176C | LC4384V-5TN176C | LC4384V-5TN176I | LC4384B-5T176I | LC4384C-5TN176I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-176 (24 x 24 mm) | TQFP-176 (24 x 24 mm) | TQFP-176 (24 x 24 mm) | TQFP-176 (24 x 24 mm) | TQFP-176 (24 x 24 mm) | TQFP-176 (24 x 24 mm) |
| Terminal Count | 176 terminals | 176 terminals | 176 terminals | 176 terminals | 176 terminals | 176 terminals |
| Terminal Pitch | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm |
| Package Body Size | 24 x 24 mm | 24 x 24 mm | 24 x 24 mm | 24 x 24 mm | 24 x 24 mm | 24 x 24 mm |
Key Differentiators
- High terminal count for consolidated programmable logic (vs LC4384V-5T176C)
- Industrial-grade junction-temperature specification (vs LC4384V-5T176C)
- Three internal supply options (vs LC4384B-5T176I)
- Fine-pitch surface-mount integration (vs LC4384C-5TN176I)
Design Notes
Use the manufacturer land pattern for the 24 x 24 mm TQFP with 0.5 mm pitch rather than generating a footprint from terminal count alone. Check pad length, pad width, solder-mask expansion, paste volume, and courtyard against the package drawing. Because this is a 176-terminal gull-wing package, fanout escape routing, paste consistency, and component placement tolerances can dominate assembly yield. Confirm terminal-one orientation against both the footprint and the PCB silkscreen before releasing artwork.
Plan the 3.3 V, 2.5 V, and 1.8 V internal-supply architecture before assigning I/O standards. The manufacturer datasheet identifies all three supply options, but it does not make every voltage combination valid for every interface. Keep the selected supply and ground terminals on the shortest possible paths, distribute them through multiple terminals where recommended, and place local high-frequency decoupling immediately adjacent to the device. Include adequate bulk capacitance at the board level and verify startup, reset, and configuration behavior in hardware.
Treat configuration, programming, clock, and high-speed user interfaces as separate classes of nets during layout. Keep programming and configuration traces away from sensitive analog or high-speed inputs where practical, provide continuous ground references beneath critical routes, and avoid routing high-current or switching signals between the device's supply and ground pins. Use the manufacturer's timing and I/O guidance to determine whether series termination or other edge-rate controls are required; the package pitch alone is not sufficient to guarantee signal integrity.
Do not treat a shared family suffix as proof of complete interchangeability. Before substituting LC4384V-5T176C, LC4384V-5TN176C, LC4384V-5TN176I, LC4384B-5T176I, or LC4384C-5TN176I, verify terminal assignments, timing grade, temperature limits, valid supply combinations, configuration memory, I/O standards, and power behavior. In particular, a nominal pin-compatible footprint does not guarantee that an existing bitstream can be used without recompilation or board changes.
Calculate the device's junction temperature from actual power consumption, PCB copper area, airflow, and ambient temperature. The -40 °C to 105 °C specification applies to the junction and is not an ambient-temperature guarantee. Preserve manufacturer-recommended ground and power-plane connections, avoid enclosing the device in an unventilated thermal pocket, and distribute heat across the 24 x 24 mm package when practical. Recheck the operating margin at the highest expected ambient temperature and during in-system programming or reconfiguration.
Compliance Information
The verified manufacturer and distributor descriptions identify the device as an industrial-temperature Lattice SuperFAST CPLD but do not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.