Lattice Semiconductor

LFE2-6E-5FN256C - 6K LUT ECP2 FPGA | Lattice Semiconductor

MPN: LFE2-6E-5FN256C ✓ فعال
1.2 V Vdss 256-FPBGA (FN256) Package -5 Speed 56,320 bit Memory
حداقل سفارش: 1 |

LFE2-6E-5FN256C نمای کلی

Lattice Semiconductor LFE2-6E-5FN256C is an ECP2 field-programmable gate array with 6,000 logic cells, 190 user I/O, a 56,320-bit embedded memory resource, and a 1.2 V core supply in a 256-ball FBGA package. The -5 speed grade targets general-purpose programmable-logic designs where a compact 17 x 17 mm package and high I/O count are important.

An FPGA is a reconfigurable digital semiconductor: lookup tables, flip-flops, routing resources, memory blocks, and programmable I/O form a digital system that can be configured after manufacture. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic device family and complements microcontrollers, DSPs, and application-specific standard products. It is especially useful when a design needs parallel logic, flexible interfaces, short development cycles, or field updates.

The LFE2-6E-5FN256C provides 6,000 LUT-equivalent logic cells, 190 I/O, and up to 55 Kb of block RAM. Its 90 nm ECP2 implementation supports integration of control logic, data acquisition, communications, and general-purpose digital processing. The speed-grade designation is -5, and the device operates from a 1.2 V core, allowing a compact power-management design around the FPGA.

The 256-ball FN256 package provides substantial connectivity for a device of this density. Its 17 x 17 mm area is suitable for module-level and embedded industrial equipment where a larger leaded package would be impractical. The ECP2 architecture also gives designers access to programmable logic blocks, embedded memory, PLL-based clocking resources, and dedicated I/O structures for common digital interfaces.

Typical applications include industrial control and data acquisition, communications gateways, embedded video timing, test-and-measurement logic, network-interface front ends, and compact embedded systems. In each case, designers can implement parallel datapaths and peripheral control in one programmable device while retaining the option to revise the bitstream during product development.

PCB design should prioritize clean power delivery to the 1.2 V core, low-impedance ground distribution, and short high-speed routing between FPGA banks and external memory or transceiver components. Use the manufacturer's pinout and package information to assign every ball, and verify the bank voltage requirements for each I/O group before connecting external circuitry.

This product record combines the ECP2 device identity, resource counts, package details, pricing structure, compatible alternatives, and practical implementation guidance in one engineering-focused reference. It also highlights the distinctions among speed grades, package variants, and interface families so procurement and design teams can evaluate interchangeability without assuming that similar ECP2 devices are automatically interchangeable.

جایگزین‌های drop-in برای LFE2-6E-5FN256C — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LFE2-6E-5FN256C (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Device Type, User I/O, Lead-Free Status, Package Dimensions.

Lattice Semiconductor
Package: 256-pin FBGA, 17 x 17 mm
Device Type: ECP2 Field Programmable Gate Array (FPGA)
User I/O: 190 pins
مقایسه با LFE2-6E-5FN256C →
Lattice Semiconductor
Package: 256-ball Fine Pitch Ball Grid Array
Device Type: ECP2 Field Programmable Gate Array (FPGA)
Lead-Free Status: Lead free
مقایسه با LFE2-6E-5FN256C →
Lattice Semiconductor
Package: 256-pin FBGA
Device Type: ECP2 field-programmable gate array (FPGA)
Lead-Free Status: Lead-free
مقایسه با LFE2-6E-5FN256C →
Lattice Semiconductor
Package: 256-ball FBGA, 17 mm × 17 mm
Device Type: ECP2 Field Programmable Gate Array (FPGA)
Lead-Free Status: Lead free
مقایسه با LFE2-6E-5FN256C →

LFE2-6E-6FN256I

✅ جایگزین مستقیم
Lattice Semiconductor
📦 256-FPBGA (FN256)
ECP2 Field Programmable Gate Array (FPGA) · 6,000 cells · 750 LABs · 56,320 bits (67 KB) · 190 I/O · 357 MHz · 1.14 V to 1.26 V · 1.2 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LFE2-6SE-5FN256C

✅ جایگزین مستقیم
📦 256-FPBGA (FN256)
Same 6,000-cell ECP2 family, 190 I/O, 1.2 V core, -5 speed grade, and 256-ball package; the 6SE variant adds S-Ser DSP characteristics rather than matching the 6E feature set.

📋 جایگزین مرجع (خارج از کاتالوگ)

LFE2-6E-6FN256C

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 256-FPBGA (FN256)
Same 6,000-cell ECP2/M family, 190 I/O, 1.2 V core, commercial-temperature FN256 package, and -6 speed grade instead of -5.

📋 جایگزین مرجع (خارج از کاتالوگ)

LFE2-6E-5FN256I

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Lattice Semiconductor
📦 256-FPBGA (FN256)
ECP2 field-programmable gate array (FPGA) · 6,000 cells · 6K LUTs · 190 I/O · 56,320 bits · 6,000 DSP slices · 1.2 V nominal · 1.14 V to 1.26 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LFE2-6E-7FN256C

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 256-FPBGA (FN256)
Same 6,000-cell ECP2/M family, 190 I/O, 1.2 V core, commercial-temperature FN256 package, and -7 speed grade instead of -5.

📋 جایگزین مرجع (خارج از کاتالوگ)

LFE2-6E-5FN256C حداکثر مقادیر مجاز و مشخصات الکتریکی

FPGA Family ECP2
Logic Cells 6,000 cells
User I/O 190 I/O
Embedded Memory 56,320 bit
Block RAM 55 Kb
Core Supply Voltage 1.2 V
Speed Grade -5
بسته‌بندی 256-FPBGA (FN256)
Package Dimensions 17 x 17 mm
Process Technology 90 nm
Commercial Junction Temperature 0 °C to 85 °C
Device Type Field Programmable Gate Array (FPGA)
Architecture ECP2/M
نوع نصب Surface Mount
Programmable I/O 190 programmable I/O

راهنمای پیکربندی پین LFE2-6E-5FN256C 17 x 17 mm

پیکربندی پین برای LFE2-6E-5FN256C (پکیج 17 x 17 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 17 x 17 mm برای LFE2-6E-5FN256C

داده پین‌آوت تفصیلی موجود نیست برای LFE2-6E-5FN256C.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LFE2-6E-5FN256C مناسب است برای 6 کاربردs: Industrial Control Logic, Data Acquisition and Signal Conditioning, Communications Gateway, Embedded Video Timing, Test and Measurement Equipment, Network Interface Front End.

🏭

Industrial Control Logic

The LFE2-6E-5FN256C fits compact industrial controllers because its 6,000 LUT-equivalent cells can execute state machines, sequencing logic, fault handling, and discrete control paths in parallel. With 190 user I/O, it can connect sensors, actuators, interlocks, and communication peripherals while leaving substantial I/O available for expansion. The 1.2 V core and 256-ball FN256 package support dense board layouts, while the -5 speed grade and 0 °C to 85 °C commercial junction range should be checked against the enclosure's worst-case temperature and timing requirements.

📊

Data Acquisition and Signal Conditioning

A data-acquisition front end can use the LFE2-6E-5FN256C for timing control, channel multiplexing, trigger logic, digital filtering, and buffer management. Its 56,320-bit embedded-memory resource and 55 Kb of block RAM provide useful local storage for parallel data paths, while 190 I/O allow simultaneous connection to converters, counters, and test ports. The device does not perform analog conversion itself, but its programmable digital section can ensure deterministic sampling, alignment, and data transfer when paired with suitable external converters.

🌐

Communications Gateway

The LFE2-6E-5FN256C is appropriate for low- and moderate-rate gateway logic that must combine framing, packet routing, buffering, status reporting, and multiple peripheral interfaces. Its 6,000 LUT-equivalent cells support parallel protocol state machines, and the 190 I/O can expose parallel data buses, control signals, and serial links implemented in the fabric. The 17 x 17 mm FN256 package is useful when the gateway must fit into compact embedded equipment, although high-speed external memory or transceiver requirements may demand careful timing and I/O-bank validation.

📺

Embedded Video Timing

The LFE2-6E-5FN256C can implement video timing generation, pixel and line counters, blanking intervals, test-pattern insertion, and interface control in compact display or imaging modules. Its parallel fabric and 190 I/O allow timing logic to operate alongside command processing and diagnostic functions. The 1.2 V core reduces supply complexity compared with many older programmable-logic devices, while the 256-ball package preserves a large number of connections for video data, synchronization, configuration, and auxiliary control functions.

🔧

Test and Measurement Equipment

In test and measurement equipment, the LFE2-6E-5FN256C can combine pattern generation, sequencing, result capture, status display, and communication logic within one programmable device. Its 55 Kb of block RAM supports local buffers and working data, while the -5 speed grade targets deterministic operations that do not require the timing margin of faster family members. The large I/O count is valuable for parallel DUT control, trigger distribution, and instrument-bus interfaces, subject to the voltage and standards supported by each I/O bank.

🌐

Network Interface Front End

The LFE2-6E-5FN256C can serve as the programmable front end for network-interface equipment requiring packet classification, queues, buffering, status reporting, and local control. Six thousand LUT-equivalent cells are sufficient for moderate parallel-processing tasks, and 190 I/O provide connections for data buses, clocks, and management signals. Engineers should match the selected LFE2-6E-5FN256C I/O features to the physical interface, maintain a clean clock path, and confirm that the 1.2 V core and external transceiver supplies operate within their respective bank constraints.

What is the LFE2-6E-5FN256C?
The LFE2-6E-5FN256C is a Lattice Semiconductor ECP2 field-programmable gate array with 6,000 logic cells, 190 user I/O, 56,320 bits of embedded memory, and a 1.2 V core supply. According to Lattice Semiconductor product listings, it uses the FN256 256-ball FBGA package and is assigned the -5 speed grade. It is intended for compact digital-logic, control, communications, and data-acquisition systems requiring reconfigurable parallel processing.
How many LUTs and I/O does the LFE2-6E-5FN256C have?
The LFE2-6E-5FN256C contains 6,000 LUT-equivalent logic cells and provides 190 user I/O. Lattice Semiconductor product information identifies the device as part of the ECP2 family, with 55 Kb of block RAM and a 1.2 V core supply. These resources make it suitable for consolidating parallel control logic, data paths, and interface functions into one programmable device rather than using several separate fixed-function components.
What package does the LFE2-6E-5FN256C use?
The LFE2-6E-5FN256C uses a 256-ball FN256 FBGA package measuring 17 x 17 mm. The package designation and ball count are important when replacing the component because PCB land patterns must match exactly, including ball assignments and exposed thermal requirements. Use the manufacturer pin-description table and package drawing when assigning power, ground, configuration, clock, and user I/O connections.
Where can I download the LFE2-6E-5FN256C datasheet PDF?
The LFE2-6E-5FN256C datasheet can be accessed through the Lattice Semiconductor documentation linked from the Octopart datasheet page at https://octopart.com/datasheet/lattice-semiconductor/LFE2-6E-5FN256C. The manufacturer document should be used for the authoritative FN256 ball map, operating limits, configuration procedure, timing parameters, and recommended power architecture. Similar ECP2 order codes can differ in speed grade, temperature range, package, or interface resources.
Where is the LFE2-6E-5FN256C pinout located?
The authoritative LFE2-6E-5FN256C pinout is in the FN256 package pin-description table and package drawing in the Lattice Semiconductor ECP2 documentation. The 256-ball package includes power, ground, configuration, clock, and user I/O assignments that must be reproduced exactly on the PCB. Review the bank and supply requirements for every I/O group before finalizing the schematic because a compatible-looking board footprint alone does not establish functional interchangeability.
What is the difference between the ECP2 and ECP2/M versions of the LFE2-6E-5FN256C?
The LFE2-6E-5FN256C is identified as an ECP2/M device, combining the ECP2 FPGA architecture with the ECP2/M resource and feature set. According to Lattice Semiconductor listings, it includes 6,000 logic cells, 190 I/O, 55 Kb of block RAM, and a 1.2 V core. The exact difference between ECP2 and ECP2/M feature sets depends on the manufacturer family documentation and should be checked against the intended design resources.
Can LFE2-6E-6FN256I replace the LFE2-6E-5FN256C?
The LFE2-6E-6FN256I is a candidate replacement when its FN256 pinout, voltage configuration, and supported I/O standards match the target design. It uses the same Lattice Semiconductor ECP2/M device family and 256-ball FN256 package, while its -6 designation indicates a different speed grade and its I suffix indicates a different temperature classification. The -6 part may provide higher performance, but that difference does not by itself guarantee timing compatibility with an existing -5 design.
Is LFE2-6SE-5FN256C the same as the LFE2-6E-5FN256C?
No. The LFE2-6SE-5FN256C and LFE2-6E-5FN256C are related ECP2-family devices but not functionally identical. Lattice Semiconductor listings associate the 6SE variant with S-Ser DSP functionality and describe both devices as having 6K LUTs, 190 I/O, a 1.2 V core, and -5 speed. Because the 6SE family includes additional interface characteristics, it should be treated as a design-review alternative rather than assumed to be a transparent replacement.
When should I choose the LFE2-6E-5FN256C instead of a faster ECP2 variant?
Choose the LFE2-6E-5FN256C when its -5 timing performance satisfies the design clock targets and you want a standard commercial-temperature ECP2/M implementation with 6,000 logic cells and 190 I/O. A faster -6 or -7 device can provide additional timing margin, but its operating limits and temperature classification must be acceptable. The correct choice is determined by the slowest required interface, internal clocking plan, I/O standards, and thermal environment.
Is the LFE2-6E-5FN256C suitable for industrial control and data acquisition?
The LFE2-6E-5FN256C is suitable for compact control and acquisition logic requiring parallel digital processing, 190 I/O, and configurable resources. Its 6,000 LUT-equivalent cells and 55 Kb of block RAM can support state machines, data buffering, protocol handling, and control functions. The commercial junction range of 0 °C to 85 °C should be checked against the system's ambient temperature, rise above ambient, and enclosure conditions.
What can replace the LFE2-6E-5FN256C on the same PCB?
The closest drop-in candidates are Lattice Semiconductor ECP2/M devices that retain the FN256 256-ball footprint, including the LFE2-6E-6FN256I and speed-grade variants of the LFE2-6E-5FN256C. A valid PCB-level replacement must match the pinout, core voltage, configuration method, supported I/O standards, memory interfaces, and temperature grade. Verify timing and thermal margins before substituting a faster or differently classified device.
What is the best Lattice Semiconductor equivalent for the LFE2-6E-5FN256C?
The best Lattice Semiconductor equivalent is the closest ECP2/M order code with the same FN256 footprint and required electrical features. The LFE2-6E-6FN256I is a documented family candidate because it retains 6,000 logic cells, 190 I/O, a 1.2 V core, and the 256-ball package. Speed and temperature codes differ, so verify the complete pinout and operating requirements before approving it as a drop-in replacement.
Where can I buy the LFE2-6E-5FN256C online?
Use the Request a Quote form on this page to request the LFE2-6E-5FN256C, current availability, order quantity, and lead time. The part is an ECP2/M FPGA in a 256-ball FN256 package, so quote the complete order code and required commercial-temperature requirements with the request. The Request a Quote workflow allows procurement to confirm the exact suffix and current manufacturing status before an order is placed.
What is the current price of the LFE2-6E-5FN256C?
The current commercial price for the LFE2-6E-5FN256C should be obtained through the Request a Quote form on this page because pricing and availability can change with quantity and market conditions. Include the required order quantity and packaging preference in the request. The product's key technical identifiers are 6,000 logic cells, 190 I/O, a 1.2 V core, the -5 speed grade, and the FN256 package.
What is the lead time and stock status of the LFE2-6E-5FN256C?
Current stock status and lead time for the LFE2-6E-5FN256C should be confirmed through the Request a Quote form on this page. Include the required quantity, production or prototype schedule, and acceptable tray, tape-and-reel, or other packing arrangement. The manufacturer lists the device as an active ECP2/M FPGA, but current procurement timing should be matched to the customer's assembly schedule rather than inferred from general family availability.
What are the key specifications engineers should know about the LFE2-6E-5FN256C?
The key LFE2-6E-5FN256C specifications are 6,000 LUT-equivalent logic cells, 190 user I/O, 56,320 bits of embedded memory, 55 Kb of block RAM, a 1.2 V core supply, and a -5 speed grade. Lattice Semiconductor identifies the device in a 256-ball FN256 FBGA package measuring 17 x 17 mm and using 90 nm process technology. Its commercial junction-temperature range is 0 °C to 85 °C. These values define the core capacity, board-space requirements, and environmental envelope for initial design selection.

داده‌های مرجع مهندسی برای LFE2-6E-5FN256C — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LFE2-6E-5FN256C when a design needs 6,000 LUT-equivalent cells, 190 user I/O, 55 Kb of block RAM, a 1.2 V core, and a compact 256-ball FN256 package without requiring the additional timing margin of a -6 or -7 grade. Its commercial 0 °C to 85 °C junction range suits standard indoor and industrial-equipment environments where the complete thermal design remains within that envelope. Consider the LFE2-6E-6FN256I when the same ECP2/M resources and footprint are needed but a faster grade and industrial temperature classification are preferable. The LFE2-6E-7FN256C offers another same-family timing option for designs needing more margin. Select the LFE2-6SE-5FN256C only when its S-Ser DSP resources are useful and the full interface behavior has been validated. Before replacing the target, verify the manufacturer pin table, I/O voltage standards, configuration method, clocking resources, embedded memory, power estimate, and timing closure.

مقایسه با جایگزین‌ها

پارامتر این محصول LFE2-6E-6FN256I LFE2-6SE-5FN256C LFE2-6E-6FN256C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 256-FPBGA (FN256) 256-FPBGA (FN256) 256-FPBGA (FN256) 256-FPBGA (FN256)
FPGA Family ECP2/M ECP2/M ECP2 ECP2/M
Logic Cells 6,000 cells 6,000 cells 6,000 cells 6,000 cells
User I/O 190 I/O 190 I/O 190 I/O 190 I/O
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V
Speed Grade -5 -6 -5 -6
Block RAM 55 Kb 55 Kb 55 Kb 55 Kb
Process Technology 90 nm 90 nm 90 nm 90 nm
Temperature Classification Commercial, 0 °C to 85 °C junction Industrial Commercial Commercial
Special Interface Features ECP2/M ECP2/M S-Ser DSP ECP2/M

تفاوت‌های کلیدی

  • Standard -5 speed grade with full ECP2/M resource set (در مقابلLFE2-6E-6FN256I)
  • ECP2/M device without the 6SE interface designation (در مقابلLFE2-6SE-5FN256C)
  • Commercial-temperature ordering configuration (در مقابلLFE2-6E-5FN256I)
  • 190-user-I/O connectivity in a 17 x 17 mm package (در مقابلLFE2-6E-6FN256C)

یادداشت‌های طراحی

Design the 1.2 V core rail as a dedicated, low-impedance supply and follow the manufacturer decoupling guidance in the ECP2 power-supply section. Place the smallest high-frequency bypass capacitors directly at the relevant supply balls rather than routing core current through long PCB traces. Check every I/O bank voltage independently because a 1.2 V core does not imply that all 190 user I/O can operate at 1.2 V.

Use the FN256 package drawing and pin-description table to reproduce ball locations, power distribution, configuration pins, and ground connections exactly. A compatible-looking 256-ball package is not sufficient for a true replacement because ball functions and thermal requirements must also match. Keep sensitive clock and configuration routing away from high-current switching nodes, and provide uninterrupted ground connectivity beneath the device whenever the PCB stack-up permits it.

Do not treat the -5, -6, -7, 6E, 6SE, C, and I order-code fields as interchangeable labels. Speed grade affects timing margin, 6SE identifies a different interface family, and the temperature suffix determines the commercial or industrial operating classification. Before substituting another FN256 device, compare configuration behavior, I/O standards, memory resources, embedded multipliers, PLL resources, power consumption, and the complete manufacturer pin table.

Route clocks and high-fanout control signals as short, continuous paths with controlled return current. Add source-series termination only after signal-integrity analysis identifies ringing or excessive edge rate. For external memory or transceiver interfaces, follow the ECP2 interface guidance for I/O timing, output delay, input threshold, and reference-clock routing rather than treating the FPGA as a generic digital load.

The commercial FN256 order code is rated for a 0 °C to 85 °C junction-temperature environment, so ambient temperature and PCB heating must be included in the thermal budget. Use the manufacturer's power-estimation guidance for the selected clock rate, I/O activity, and utilization. Preserve the recommended copper area and thermal-via pattern around the package, and validate the assembled board at worst-case activity rather than relying only on typical FPGA power.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this order code.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LFE2-6E-5FN256C LFE2-6E-5FN256C datasheet LFE2-6E-5FN256C pinout LFE2-6E-5FN256C datasheet pdf LFE2-6E-5FN256C equivalent LFE2-6E-5FN256C replacement LFE2-6E-5FN256C cross reference LFE2-6E-5FN256C vs LFE2-6E-6FN256I LFE2-6E-5FN256C footprint Lattice Semiconductor LFE2-6E-5FN256C LFE2-6E-5FN256C price LFE2-6E-5FN256C stock LFE2-6E-5FN256C application circuit LFE2-6E-5FN256C 256 FBGA

قطعات و اصطلاحات مرتبط

Lattice Semiconductor LFE2-6E-5FN256C LFE2-6E-6FN256I LFE2-6SE-5FN256C LFE2-6E-6FN256C LFE2-6E-5FN256I LFE2-6E-7FN256C ECP2 ECP2/M FPGA field-programmable gate array CPLD programmable logic lookup table LUT block RAM embedded memory 1.2 V core 190 user I/O 6,000 logic cells FN256 256-ball FBGA surface mount 90 nm process S-Ser DSP industrial control data acquisition communications gateway test and measurement
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ