Texas Instruments

LM224NG4 - Quad 1.2MHz Op Amp | Texas Instruments

MPN: LM224NG4 ✓ فعال
3 V to 32 V Vdss 14-pin DIP (0.300 inch, 7.62 mm pitch) Package
حداقل سفارش: 1 |

LM224NG4 نمای کلی

Texas Instruments LM224NG4 is a general-purpose, four-circuit operational amplifier with a 1.2 MHz gain-bandwidth product, supplied in a 14-pin dual in-line package. The four amplifiers are internally frequency compensated and can operate independently, making the device suitable for general signal-conditioning, instrumentation, and control applications. The package supports through-hole PCB assembly in a 0.300-inch, 7.62 mm pitch DIP format.

An operational amplifier is an analog signal-processing IC that amplifies the difference between its inverting and non-inverting inputs. Its high open-loop gain, negative-feedback operation, and internal compensation allow it to function as an inverting amplifier, non-inverting amplifier, voltage follower, comparator-style interface, or active filter building block. The LM224NG4 belongs to the broad operational-amplifier hierarchy within analog and linear integrated circuits.

The key headline specifications are four amplifier circuits in one package, a 1.2 MHz gain-bandwidth product, and a 14-pin DIP package. The LM224 family is designed for operation from a single supply or split supplies, with a documented supply-voltage range of 3 V to 32 V. This combination supports economical industrial, instrumentation, sensor, and test-equipment designs where four general-purpose amplifiers are needed on one board.

The quad organization reduces component count and PCB area compared with four separate single operational amplifiers. Each amplifier has independent inverting and non-inverting inputs, an output, and a power connection, allowing unused amplifier sections to be configured according to standard feedback arrangements. Internal frequency compensation removes the need for an external dominant-pole capacitor in typical closed-loop uses.

Typical applications include low-frequency instrumentation amplifiers, transducer-signal conditioning, current-to-voltage conversion, sensor interfaces, sample-and-hold stages, active filtering, and general industrial control. The 1.2 MHz gain-bandwidth product is most suitable for low-to-moderate-frequency signal paths rather than high-speed video or RF amplification. Users should also account for input common-mode range, output swing, input bias current, and supply-current limits when defining the usable signal range.

For a new 14-pin DIP design, verify the pin arrangement and operating limits in the manufacturer datasheet before layout. Place bypass capacitors close to the supply pins, keep sensitive inverting-input traces short, and connect unused amplifier inputs to a defined potential rather than allowing them to float. Thermal design should consider the dissipation from all four amplifiers and the maximum ambient and junction temperatures permitted for the purchased package variant.

This page combines the verified LM224NG4 device identity with application guidance, drop-in comparison criteria, package considerations, and design notes that help engineers evaluate the part before committing it to a 14-DIP board layout.

جایگزین‌های drop-in برای LM224NG4 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM224NG4 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Amplifier Type, Package, Compensation, Maximum Supply Voltage, Number of Circuits.

Texas Instruments
Amplifier Type: Single general-purpose operational amplifier
Package: 14-pin PDIP (N)
Compensation: Internally compensated
مقایسه با LM224NG4 →
Texas Instruments
Package: 14-PDIP
Maximum Supply Voltage: 32 V
مقایسه با LM224NG4 →
onsemi
Amplifier Type: General Purpose Operational Amplifier
Package: 14-PDIP, 0.300 inch pitch, 7.62 mm
Number of Circuits: 4
مقایسه با LM224NG4 →

LM224N

✅ جایگزین مستقیم
Texas Instruments
📦 14-DIP (0.300 inch, 7.62 mm pitch)
4 circuits · Quad operational amplifier · 32 V · 1.2 MHz · 0.5 V/us

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM224AN

✅ جایگزین مستقیم
Texas Instruments
📦 14-DIP (0.300 inch, 7.62 mm pitch)
4 channels · Single general-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · Internally compensated · Single or split supply · -25°C to +85°C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM224NG

✅ جایگزین مستقیم
onsemi
📦 14-PDIP
General Purpose Operational Amplifier · 4 · 3.0 V to 32 V · 1 MHz · 0.6 V/µs · True Differential Inputs · 100 nA for the LM224A variant · -25°C to +85°C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM224N

✅ جایگزین مستقیم
Texas Instruments
📦 14-PDIP
4 circuits · Quad operational amplifier · 32 V · 1.2 MHz · 0.5 V/us

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM224AN

✅ جایگزین مستقیم
Texas Instruments
📦 14-PDIP
4 channels · Single general-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · Internally compensated · Single or split supply · -25°C to +85°C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM224NG4 حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type General-purpose operational amplifier
Number of Circuits 4 circuits
Gain-Bandwidth Product 1.2 MHz
Supply Voltage Range 3 V to 32 V
Supply Configuration Single supply or split supply
Compensation Internally frequency compensated
Package Type 14-pin DIP (0.300 inch, 7.62 mm pitch)
Package Family PDIP
نوع نصب Through-hole

راهنمای پیکربندی پین LM224NG4 pdip

پیکربندی پین برای LM224NG4 (پکیج pdip). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج pdip برای LM224NG4

داده پین‌آوت تفصیلی موجود نیست برای LM224NG4.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LM224NG4 مناسب است برای 6 کاربردs: Industrial Sensor Signal Conditioning, Current-to-Voltage Conversion, Active Audio and Control Filtering, Test and Measurement Equipment, Battery and Supply Monitoring, Data Acquisition Front End.

🏭

Industrial Sensor Signal Conditioning

LM224NG4 fits low-frequency industrial sensor interfaces because four independently usable amplifiers can amplify, buffer, and filter one sensor chain in a 14-pin DIP package. Its 3 V to 32 V operating range accommodates common industrial supply rails, while the 1.2 MHz gain-bandwidth product is adequate for many process and position sensors. Use one section for front-end amplification and another for an active low-pass filter, then verify input offset, bias current, common-mode range, and output swing against the sensor output.

🔧

Current-to-Voltage Conversion

LM224NG4 is well suited to precision current-to-voltage conversion in instrumentation and test circuits. Four amplifier sections allow multiple conversion or measurement channels to share one package, reducing board area compared with discrete single amplifiers. The 1.2 MHz gain-bandwidth product supports low-to-moderate measurement bandwidth, and the 3 V to 32 V supply range supports single- and split-supply architectures. Select feedback resistors for the required gain and confirm that source current, output swing, and input offset remain within the operating limits.

🎧

Active Audio and Control Filtering

LM224NG4 can implement active filters and audio-control signal paths with bandwidth below the amplifier's 1.2 MHz gain-bandwidth product. Multiple amplifier sections allow Sallen-Key or multiple-feedback stages to be built without using four separate packages. The device's 3 V to 32 V supply range accommodates many control boards, but passive-component tolerances, amplifier noise, slew rate, and output loading determine the actual response. Check the gain-bandwidth and common-mode limits before extending the filter beyond its intended low-frequency range.

🖥️

Test and Measurement Equipment

LM224NG4 is useful in test and measurement equipment requiring buffered inputs, programmable gain stages, or active filtering around low-frequency sources. Its four internal amplifiers provide independent channels for source buffering, gain conversion, offset correction, and output isolation. The 1.2 MHz gain-bandwidth product suits many precision low-frequency instruments rather than wideband scopes or arbitrary-waveform output stages. Validate input capacitance, output drive, stability, and supply noise performance with the intended source and load impedances.

⚡

Battery and Supply Monitoring

LM224NG4 can amplify low-level monitoring signals in battery-powered or industrial power systems because it operates from a supply as low as 3 V and contains four amplifier sections. The parts may buffer sensed voltages, create differential measurements, or drive comparator inputs, subject to the common-mode and output-swing limits. Because the quad package can consume current even when only some sections are active, analyze total quiescent demand and battery life. A series input limiter may also be required when the monitored node can exceed the amplifier's supply rails.

📡

Data Acquisition Front End

LM224NG4 is suitable for conditioning outputs from low-speed sensors and converters in a data-acquisition front end. One section can amplify a bipolar or unipolar sensor signal, another can provide gain or offset adjustment, and additional sections can filter or buffer the result. The 1.2 MHz gain-bandwidth product is suitable for many multiplexed low-frequency acquisition channels, while the 3 V to 32 V range simplifies interface design. Confirm settling behavior, source impedance, channel isolation, and the applicable conversion-system sampling requirements.

What is LM224NG4?
LM224NG4 is a Texas Instruments quad general-purpose operational amplifier with four internally compensated amplifiers in a 14-pin DIP package. According to the Texas Instruments LM224 datasheet, the device has a 1.2 MHz gain-bandwidth product and operates from 3 V to 32 V. It is intended for low-frequency signal conditioning, instrumentation, sensor interfaces, active filters, and general analog control circuits where four amplifier sections can share one package.
What are the key specifications of LM224NG4 that engineers should know?
The LM224NG4 provides four general-purpose amplifier circuits, a 1.2 MHz gain-bandwidth product, internal frequency compensation, and a 3 V to 32 V supply-voltage range in a 14-pin DIP package. According to the Texas Instruments LM224 datasheet, its principal strengths are low power use, flexible single- or split-supply operation, and four independent amplifier sections in one through-hole package. Check the datasheet for input common-mode range, output swing, bias current, and temperature limits.
What is the operating voltage of LM224NG4?
LM224NG4 operates from 3 V to 32 V across its positive and negative supply terminals. According to the Texas Instruments LM224 datasheet, the device can be powered from a single positive supply or from split positive and negative supplies. The usable signal range remains narrower than the supply range, so the input common-mode and output swing limits must be checked for the selected configuration.
Where can I download the LM224NG4 datasheet PDF?
The LM224NG4 datasheet can be located through the Texas Instruments product documentation for the LM224 family or through the LM224NG4 document-search result listed on this page. The document defines the 14-pin arrangement, electrical limits, typical characteristics, supply requirements, and application information. Engineers should use the Texas Instruments copy as the controlling document when making design or compliance decisions.
Where is the LM224NG4 pinout?
The LM224NG4 pinout is shown in the pin-configuration section of the Texas Instruments LM224 datasheet. The device uses a 14-pin DIP outline with four amplifier sections. Use the numbered pin diagram when assigning output, inverting input, non-inverting input, positive supply, negative supply, and no-connect positions; do not infer a pin function from another quad-op-amp package.
Can LM224NG4 be used with a single supply?
Yes, LM224NG4 can operate from a single supply within its documented 3 V to 32 V supply-voltage range. According to the Texas Instruments LM224 datasheet, split-supply operation is also supported. In a single-supply circuit, verify that the input and output signals remain inside the amplifier's common-mode and output-swing limits; biasing near mid-supply may be necessary for bipolar input signals.
What can replace LM224NG4?
LM224N, LM224AN, and the onsemi LM224NG are direct candidates for LM224NG4 because they use the same 14-pin DIP class and implement four general-purpose operational amplifiers. The LM224NG cross-reference information identifies LM224AN as terminal- and package-consistent, while the onsemi LM224NG listing identifies a 14-PDIP quad amplifier with a 1.2 MHz gain-bandwidth product. Confirm electrical limits and temperature grade before substitution.
What is the best onsemi equivalent for LM224NG4?
The onsemi LM224NG is the closest identified cross-brand equivalent for LM224NG4. It is a four-circuit general-purpose operational amplifier in a 14-PDIP package with a 1.2 MHz gain-bandwidth product, matching the target's principal device characteristics and through-hole footprint. Review the onsemi datasheet for pin orientation, supply-current limits, input and output ranges, temperature grade, and lifecycle status before approving the substitution.
What is the difference between LM224NG4 and LM224N?
LM224NG4 and LM224N belong to the same Texas Instruments LM224 family, and the identified cross-reference information describes LM224N as completely replaceable because its terminals, package, and functional characteristics are consistent. Both are 14-pin DIP four-amplifier devices with a 1.2 MHz gain-bandwidth product. Confirm the exact ordering suffix, temperature range, and approved-supplier configuration for production.
When should I choose LM224NG4 over LM224N?
Choose LM224NG4 when its exact ordering configuration is the approved device for an existing Texas Instruments 14-DIP design. According to the LM224 family information, LM224N is functionally and pin compatible, making it useful where the manufacturer permits an alternate ordering code. Choose the exact approved part when component standardization, traceability, qualification, or supply planning matters more than interchangeability.
Is LM224NG4 suitable for sensor signal conditioning?
Yes, LM224NG4 is suitable for many low-frequency sensor signal-conditioning stages because it contains four internally compensated general-purpose amplifiers and accepts a 3 V to 32 V supply range. A typical circuit uses one section as a non-inverting front end and another as an active filter or buffer. The 1.2 MHz gain-bandwidth product supports moderate signal bandwidth, but input offset, bias current, noise, and common-mode limits must match the sensor.
Is LM224NG4 suitable for industrial control systems?
LM224NG4 can be used in industrial control systems when its supply range, input limits, output swing, and temperature rating fit the installation. The Texas Instruments LM224 family supports single- or split-supply operation from 3 V to 32 V and provides four amplifiers per package. Use appropriate input protection and isolation at system boundaries, and verify the exact LM224NG4 temperature grade against the enclosure's worst-case ambient temperature.
How much heat does LM224NG4 dissipate?
LM224NG4 dissipation depends on supply voltage, output voltage, load current, quiescent current, and the number of active amplifier sections, so a fixed heat value cannot be assigned without those operating conditions. Estimated: use P = (VS − VO) × IL + VS × IQ for each active section, then add the calculated dissipation for all four sections and compare the total with the package's allowable power and junction-temperature limits.
What is the price of LM224NG4?
Current commercial pricing for LM224NG4 is presented through the Request a Quote form on this page. Submit the required quantity, target package, and delivery location to obtain a current quotation and lead-time response. For design budgeting, do not rely on an obsolete snapshot because market availability and component pricing can change independently of the device's technical characteristics.
Where can I buy LM224NG4 and what is its lead time?
Use the Request a Quote form on this page to request LM224NG4 pricing, current stock, and lead time. Include the quantity, packaging preference, shipment destination, and target date so the sourcing team can return an actionable quotation. The manufacturer family page and the Texas Instruments LM224N cross-reference information are useful for technical validation, while current commercial conditions should be confirmed through the quotation workflow.

داده‌های مرجع مهندسی برای LM224NG4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose LM224NG4 when an existing design requires the exact Texas Instruments LM224NG4 ordering configuration, particularly for standardized procurement or qualification. LM224N is the clearest same-manufacturer alternative when the approved bill of materials permits a different ordering code; the cross-reference information identifies it as completely replaceable. LM224AN offers another package-consistent family member, but its exact grade and ordering details should be checked before substitution. The onsemi LM224NG is the strongest cross-brand option because it combines a four-circuit general-purpose design, 1.2 MHz gain-bandwidth product, and 14-PDIP package with the target. For any alternative, verify pin orientation, electrical limits, temperature grade, supply-current behavior, and qualification status. LM224NG4 is most appropriate for low-to-moderate-frequency signal conditioning, industrial instrumentation, and general control circuits where a 3 V to 32 V quad operational amplifier in a 14-DIP package is required.

مقایسه با جایگزین‌ها

پارامتر این محصول LM224N LM224AN LM224NG LM224N LM224AN
Brand Texas Instruments Texas Instruments Texas Instruments onsemi onsemi onsemi
Package 14-DIP (0.300 inch, 7.62 mm pitch) 14-DIP (0.300 inch, 7.62 mm pitch) - same 14-DIP (0.300 inch, 7.62 mm pitch) - same 14-PDIP - same 14-PDIP - same 14-PDIP - same

تفاوت‌های کلیدی

  • Four general-purpose amplifiers in one through-hole package (در مقابلLM224NG)
  • Exact Texas Instruments family continuity (در مقابلLM224N)
  • Pin- and package-consistent family option (در مقابلLM224AN)

یادداشت‌های طراحی

Decouple each supply rail close to the device with a local bypass capacitor and adequate ground-plane return. Estimated: if the total quiescent current is IQ and the supply is VS, the static device power is approximately VS × IQ; add output-stage dissipation from the driven channels and compare the result with the package power rating. Place the capacitor where its ground connection shares a low-impedance path with the amplifier supply ground.

Keep the inverting-input node physically short because feedback and parasitic capacitance at that node can alter stability and settling. Route outputs away from high-impedance inputs, use a continuous ground plane, and avoid long parallel traces that can couple output currents into sensitive inputs. Use the numbered manufacturer pin diagram when laying out the 14-pin DIP because rotation or mirroring can connect power and signal pins incorrectly.

Do not assume that the 3 V to 32 V supply range defines the allowable signal range. Check common-mode input limits, output swing, input offset, bias current, output-current capability, and operating temperature. Unused amplifier inputs must be tied to a defined potential within the input range. If a sensor output can exceed the supply rails, add suitable input protection or isolation before the amplifier package.

The 1.2 MHz gain-bandwidth product limits useful closed-loop bandwidth according to the required noise gain and stability margin. Keep normal closed-loop gains low enough for stable operation with the selected feedback network, and test source impedance, capacitive loading, and output-load effects. For active filters, calculate component tolerances and verify settling time when operating close to the amplifier's bandwidth limit.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance status was not stated in the manufacturer or distributor information for this device. Confirm the current declarations and exact ordering code with Texas Instruments before production release.

جستجوهای مرتبط

lm224n datasheet LM224NG4 datasheet LM224NG4 datasheet pdf Texas Instruments LM224NG4 LM224NG4 pinout LM224NG4 14-DIP LM224NG4 1.2MHz op amp LM224NG4 3V to 32V LM224NG4 sensor amplifier LM224NG4 equivalent LM224NG4 replacement LM224NG4 price LM224NG4 stock LM224NG4 vs LM224N

قطعات و اصطلاحات مرتبط

Texas Instruments LM224NG4 LM224N LM224AN onsemi LM224NG quad operational amplifier operational amplifier analog integrated circuit linear integrated circuit general-purpose amplifier internally frequency compensated gain-bandwidth product 1.2 MHz 3 V to 32 V 14-pin DIP PDIP through-hole package single-supply operation split-supply operation sensor signal conditioning active filter current-to-voltage conversion instrumentation amplifier
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ