LM2904BQPWRQ1 - 36V 1.2MHz Dual Op Amp | Texas Instruments
MPN: LM2904BQPWRQ1 ✓ فعالLM2904BQPWRQ1 نمای کلی
An operational amplifier is a voltage-controlled, high-gain analog building block used to amplify differential signals, buffer sensors, perform active filtering, and drive analog-to-digital converter inputs. Within the power-management and signal-processing hierarchy, the LM2904B-Q1 is a general-purpose bipolar operational amplifier designed to provide stable operation with relatively simple external compensation and conventional power-supply connections.
The LM2904BQPWRQ1 combines a 1.2 MHz gain-bandwidth product with a 36 V maximum supply rating. Its automotive qualification according to AEC-Q100 makes it appropriate for harsh operating environments where temperature range and product qualification are important. The dual configuration reduces package count when two independent amplifier channels are required, while its 8-pin TSSOP format supports compact surface-mount PCB construction.
The architecture is suited to signal paths operating from low-level sensor outputs through intermediate analog levels. A wide supply-voltage range allows the same amplifier family to work with conventional industrial rails, while the 1.2 MHz gain-bandwidth product provides useful bandwidth for audio-frequency and general instrumentation applications. Exact input-offset, input-bias, output-swing, and slew-rate limits should be confirmed against the manufacturer datasheet for the operating conditions used in the final design.
Typical applications include automotive sensor conditioning, low-voltage signal buffering, active analog filters, transducer interfaces, audio amplification stages, and general-purpose control-system analog inputs. The dual amplifier configuration is especially useful when a board requires matched channels for two sensors or when a second channel is used for reference buffering or gain compensation.
Layout should keep feedback components close to the corresponding amplifier inputs and provide a low-impedance return path for the supply and ground pins. Decoupling capacitors should be positioned near the package power terminals, while sensitive input traces should remain away from switching nodes and high-current return paths. Stable operation also depends on observing the input common-mode and output-swing limits in the manufacturer datasheet.
This page combines application guidance, design considerations, parameter comparisons, and focused replacement options for engineers evaluating the LM2904BQPWRQ1 across automotive, industrial, and instrumentation signal-conditioning designs.
جایگزینهای drop-in برای LM2904BQPWRQ1 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای LM2904BQPWRQ1 (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Automotive Qualification, Number of Channels, Amplifier Type, Gain-Bandwidth Product.
LM2904BPWRQ1
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LM2904BIPWRQ1
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LM2904PWRG3
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LM2904IPWR
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LM2904B UQDRQ1
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LM2904BQPWRQ1 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 36 V |
| Gain-Bandwidth Product | 1.2 MHz |
| محدوده دمای کاری | -40°C to 125°C |
| بستهبندی | 8-pin TSSOP |
| نوع نصب | Surface mount |
| Automotive Qualification | AEC-Q100 qualified |
| Slew Rate | 0.5 V/µs |
| Input Bias Current | 10 nA |
| وضعیت RoHS | Compliant |
پیکربندی پین LM2904BQPWRQ1
| پین 1 | OUTA — Output of amplifier A |
| پین 2 | INA- — Inverting input of amplifier A |
| پین 3 | INA+ — Non-inverting input of amplifier A |
| پین 4 | V- — Negative supply connection |
| پین 5 | INB+ — Non-inverting input of amplifier B |
| پین 6 | INB- — Inverting input of amplifier B |
| پین 7 | OUTB — Output of amplifier B |
| پین 8 | V+ — Positive supply connection |
کاربردهای معمول
LM2904BQPWRQ1 مناسب است برای 6 کاربردs: Automotive Sensor Signal Conditioning, Industrial Transducer Interface, Active Analog Filtering, Audio Preamplifier Stage, Data Acquisition Input Buffer, Automotive Control-System Amplification.
Automotive Sensor Signal Conditioning
The LM2904BQPWRQ1 fits automotive sensor conditioning because it combines two general-purpose amplifiers, a 36 V maximum supply rating, and operation from -40°C to 125°C in an 8-pin TSSOP package. Its two channels can process two related sensor signals or provide amplification and reference buffering on the same board. The 1.2 MHz gain-bandwidth product is suitable for many low- and mid-frequency automotive sensing paths, including pressure, position, and resistive transducer interfaces. Designers should verify input common-mode voltage, output swing, input offset, and transient protection against the manufacturer datasheet because automotive sensors may operate at voltages near the amplifier's electrical limits.
پیشنهادی
Industrial Transducer Interface
The LM2904BQPWRQ1 can condition low-level outputs from resistive and voltage-based industrial transducers while tolerating a supply range associated with a 36 V maximum rating. Two independent channels allow one amplifier to amplify a sensor signal while the other handles a reference or monitor signal, reducing board area. Its 1.2 MHz gain-bandwidth product supports applications that require moderate closed-loop bandwidth rather than high-speed instrumentation performance. The TSSOP-8 package is practical for compact analog boards, although input bias current, offset voltage, common-mode range, and output capability must be checked against the transducer's impedance and operating voltage.
پیشنهادی
Active Analog Filtering
The LM2904BQPWRQ1 is suitable for first-order or higher-order active-filter stages that require two amplifiers for cascaded sections, buffered summing networks, or gain-and-filter combinations. Its 1.2 MHz gain-bandwidth product provides usable loop bandwidth for audio and general industrial-control frequencies, while the 36 V supply rating accommodates industrial signal environments. Stability at the intended gain, resistor values, capacitive loading, and output-current demand must be verified in the manufacturer datasheet. Decoupling and feedback-component placement are especially important because poor layout can introduce oscillation, channel imbalance, or additional noise that is unrelated to the nominal gain-bandwidth specification.
پیشنهادی
Audio Preamplifier Stage
The LM2904BQPWRQ1 can serve as a general-purpose audio preamplifier in automotive, industrial, or instrumentation equipment where a dual low-noise amplifier and moderate bandwidth are more important than low-voltage operation. The two channels permit independent handling of left and right signals, or one channel can amplify audio while the other provides buffering or gain control. Its 1.2 MHz gain-bandwidth product is adequate for many audio-frequency amplification and filtering tasks. The actual signal quality depends on operating-point noise, distortion, output swing, load capability, and layout, so engineers should evaluate those parameters in the manufacturer datasheet for the selected gain and load.
پیشنهادی
Data Acquisition Input Buffer
The LM2904BQPWRQ1 can buffer high-impedance sensor outputs before conversion by an ADC, helping isolate the sensing element from downstream sampling and switching circuitry. Its dual architecture supports two buffered acquisition channels, while the 1.2 MHz gain-bandwidth product can accommodate many moderate-speed sampling systems. The amplifier's input bias current of 10 nA is relevant when driving high-source-impedance sensors, and its 36 V maximum supply rating supports higher-voltage industrial acquisition environments. Verify settling behavior, input capacitance, common-mode range, and output drive against the ADC and sensor specifications before using the device as a precision acquisition front end.
پیشنهادی
Automotive Control-System Amplification
The LM2904BQPWRQ1 is suitable for general-purpose amplification inside automotive control modules because it combines AEC-Q100 qualification, a -40°C to 125°C operating range, and a 36 V maximum supply rating. Engineers can use the two channels for feedback conditioning, actuator-interface amplification, or control-signal scaling before a downstream controller. Its 1.2 MHz bandwidth is suitable for many slow and medium-speed control loops, while the TSSOP-8 footprint supports compact board layouts. Transient protection, input limiting, output loading, and stable operation across the intended supply range remain application-level requirements that should be addressed separately from the operational amplifier's basic ratings.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LM2904BQPWRQ1 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | LM2904BPWRQ1 | LM2904BIPWRQ1 | LM2904PWR | LM2904IPWR | LM2904B UQDRQ1 |
|---|---|---|---|---|---|---|
| Package | TSSOP-8 (PW) | TSSOP-8 (PW) | TSSOP-8 (PW) | TSSOP-8 (PW) | TSSOP-8 (PW) | TSSOP-8 (PW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Configuration | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier |
| Maximum Supply Voltage | 36 V | 36 V | 36 V | 36 V | 36 V | 36 V |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
تفاوتهای کلیدی
- Automotive qualification distinguishes the target from general-purpose LM2904 orderings (در مقابلLM2904PWR)
- The target provides the full documented high-temperature operating range (در مقابلLM2904IPWR)
- Dual-channel TSSOP packaging supports compact signal-conditioning boards (در مقابلLM2904BIPWRQ1)
یادداشتهای طراحی
Place the supply-decoupling capacitor immediately between pins 4 and 8, with a short and low-inductance return path. Connect the two amplifier channels to the same ground reference without routing sensitive input returns through high-current motor, relay, or switching paths. Keep feedback resistors and compensation components close to their associated amplifier pins to minimize parasitic capacitance and board-level oscillation risk.
Do not treat the 36 V rating as the recommended operating supply voltage without checking the absolute-maximum and recommended-supply tables. The input common-mode range, output swing, and input voltage limits also constrain usable supply combinations. In automotive systems, add or verify transient, reverse-battery, and ESD protection before the amplifier pins; the operational amplifier's AEC-Q100 qualification does not replace application-level surge protection.
Evaluate stability with the actual feedback network, source impedance, load capacitance, and intended closed-loop gain. The 1.2 MHz gain-bandwidth product is not a guarantee of usable closed-loop bandwidth at every gain. For sensor interfaces, use short guarded input traces, maintain consistent grounding between channels, and avoid placing the dual amplifier between a noisy digital return path and a high-impedance sensor source.
Estimated: amplifier dissipation is approximately P = (V+ - V-) × I quiescent plus load-dependent output current multiplied by the voltage dropped across the output stage. The operating supply voltage, total quiescent current, output current, and package thermal resistance must be taken from the manufacturer datasheet before applying this calculation. At automotive temperatures, verify that junction-temperature margin remains acceptable across worst-case supply and load conditions.
اطلاعات انطباق
Texas Instruments identifies the LM2904-Q1, LM2904B-Q1, and LM2904BA-Q1 families as qualified for automotive use in accordance with AEC-Q100 specifications. RoHS compliance is indicated for LM2904BQPWRQ1; the other compliance fields are unknown.