Texas Instruments

LM2904P-MAND - Dual 26V 700kHz Op Amp | Texas Instruments

MPN: LM2904P-MAND ✓ فعال
26 V Vdss 8-pin PDIP Package
حداقل سفارش: 1 |

LM2904P-MAND نمای کلی

The Texas Instruments LM2904P-MAND is a dual, general-purpose operational amplifier with two independent amplifiers, a 26 V maximum supply rating, and 700 kHz gain-bandwidth performance in an 8-pin PDIP package. The device is intended for industrial and automotive control systems operating from a single power supply.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2904 contains two independent, internally frequency-compensated amplifiers, making it suitable for signal conditioning, feedback-control loops, sensor interfaces, and general-purpose analog signal processing. As a dual amplifier, it can implement two functions in one package while reducing board area and component count.

The 26 V supply rating supports higher-voltage industrial and automotive systems than common low-voltage operational amplifiers. A 700 kHz gain-bandwidth figure provides useful bandwidth for general-purpose control and conditioning tasks. The manufacturer identifies the LM2904 family for automotive and industrial control applications, while the standard general-purpose amplifier classification supports use across conventional analog designs.

Each amplifier has its own input and output pins, allowing the two sections to operate independently. Internal frequency compensation simplifies closed-loop implementation without requiring an external compensation network. This makes the device suitable for noninverting and inverting amplifiers, voltage followers, comparators, differential stages, transimpedance functions, and active-filter building blocks where appropriate stability and bandwidth requirements are met.

Common applications include transducer signal conditioning, closed-loop actuator control, low-side current sensing, buffered sensor inputs, and general industrial instrumentation. The dual configuration can also reduce the number of packages in designs requiring two independent amplifier channels, such as a sensor front end paired with a control or output-conditioning channel.

PCB design should preserve the standard 8-pin PDIP footprint and route high-impedance input signals away from switching nodes and output pins. Stable operation depends on suitable feedback compensation, source impedance, load capability, bypass capacitors, and supply decoupling. The LM2904P-MAND is best selected when its 26 V supply capability and dual channel count match the system while its 700 kHz bandwidth is adequate for the intended signal or control loop.

This page combines the manufacturer product specifications with application guidance, pin mapping, verified-source links, and practical drop-in comparison data. It is designed to help engineers identify the correct operational-amplifier footprint, evaluate supply and bandwidth requirements, and plan PCB integration without relying on generic dual-op-amp assumptions.

جایگزین‌های drop-in برای LM2904P-MAND — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM2904P-MAND (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Gain-Bandwidth Product, Amplifier Type.

onsemi
Package: 8-PDIP, 0.300 inch pitch (7.62 mm)
Gain-Bandwidth Product: 1 MHz
Amplifier Type: General-purpose operational amplifier
مقایسه با LM2904P-MAND →
Texas Instruments
Package: 8-PDIP
مقایسه با LM2904P-MAND →

LM2904P

✅ جایگزین مستقیم
Texas Instruments
📦 8-PDIP
Dual operational amplifier · 2 · 26 V · 700 kHz · 8-PDIP · Through-hole · Standard general-purpose amplifier

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2904ANG

✅ جایگزین مستقیم
onsemi
📦 8-PDIP
2 circuits · General-purpose operational amplifier · Single or split supply · 1 MHz · 0.6 V/µs · Extends to ground/VEE · Low · 8-PDIP, 0.300 inch pitch (7.62 mm)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2904P

✅ جایگزین مستقیم
Texas Instruments
📦 8-PDIP
Dual operational amplifier · 2 · 26 V · 700 kHz · 8-PDIP · Through-hole · Standard general-purpose amplifier

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2904P-MAND حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type Dual general-purpose operational amplifier
Number of Amplifiers 2
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 700 kHz
Architecture Two independent, internally frequency-compensated amplifiers
بسته‌بندی 8-pin PDIP
نوع نصب Through-hole
Supply Configuration Single supply
Primary Application Automotive and industrial control systems

پیکربندی پین LM2904P-MAND

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
پین 1 OUT1 — Amplifier 1 output
پین 2 -IN1 — Amplifier 1 inverting input
پین 3 +IN1 — Amplifier 1 non-inverting input
پین 4 V- — Negative supply or ground connection
پین 5 +IN2 — Amplifier 2 non-inverting input
پین 6 -IN2 — Amplifier 2 inverting input
پین 7 OUT2 — Amplifier 2 output
پین 8 V+ — Positive supply connection

کاربردهای معمول

LM2904P-MAND مناسب است برای 6 کاربردs: Industrial Sensor Signal Conditioning, Automotive Control-Signal Conditioning, Current-Sense Amplifier, Active Filter and Frequency Compensation, Data Acquisition Front End, Power-Supply Feedback and Monitoring.

🏭

Industrial Sensor Signal Conditioning

The LM2904P-MAND fits industrial sensor-conditioning circuits that require two independent analog channels and a higher-voltage supply environment than typical low-voltage precision amplifiers provide. Its two internally frequency-compensated amplifiers can form a noninverting or inverting gain stage, while the 26 V family supply rating supports systems operating above conventional 5 V or 3.3 V rails. The 700 kHz gain-bandwidth characteristic permits useful closed-loop bandwidth for moderately responsive process-control signals. Design the first stage around the sensor output range, check the selected amplifier’s common-mode and output-swing limits, and place bypass capacitors close to the supply pins.

🚗

Automotive Control-Signal Conditioning

The LM2904P-MAND is suitable for general-purpose automotive control electronics where a dual through-hole operational amplifier is acceptable. Two independent channels can condition separate sensor or switch signals without duplicating an entire amplifier package, and the 26 V supply rating aligns with higher-voltage automotive and industrial environments. The 700 kHz gain-bandwidth product is suitable for low-to-moderate-frequency control and filtering functions rather than precision signal-chain requirements at high frequency. Engineers should confirm the exact ordering code’s qualification and temperature requirements, protect input paths from automotive transients, and verify the chosen gain against the device’s full operating limits.

⚡

Current-Sense Amplifier

The LM2904P-MAND can implement a single-ended current-sense amplifier in applications where the sense voltage is small and bandwidth requirements are modest. One amplifier channel can amplify the voltage developed across a low-value shunt, while the second channel can provide buffering, offset correction, or an independent monitoring function. The 700 kHz gain-bandwidth rating provides a practical bandwidth ceiling, and the dual package can simplify implementation where a second signal chain is also needed. The input common-mode voltage, input offset voltage, shunt resistance, amplifier gain, and output-swing limits must be checked before applying the device.

🔧

Active Filter and Frequency Compensation

The LM2904P-MAND can support active low-pass, high-pass, or second-order filter stages when the required signal bandwidth remains comfortably below its 700 kHz gain-bandwidth capability. Two independent amplifiers permit cascaded sections, a Sallen-Key stage, or a combined filter and buffer on one board. Internal frequency compensation reduces external compensation-component requirements for many closed-loop configurations, although component tolerances, source impedance, and load impedance still affect response. Choose resistor and capacitor values against the manufacturer’s stability guidance, test gain peaking with the actual source and load, and maintain the intended common-mode range throughout the passband.

🖥️

Data Acquisition Front End

The LM2904P-MAND is useful in compact data-acquisition front ends that must amplify or buffer inputs before conversion or digitization. Its two independent channels can serve as a differential input stage, a gain stage, or a pair of buffered sensor channels, while the 26 V supply capability accommodates higher-voltage industrial interfaces. The 700 kHz bandwidth is appropriate for many slowly varying measurement signals but not for high-speed waveform acquisition. Select the closed-loop gain so that signal bandwidth and phase margin remain acceptable, verify input common-mode limits for every input excursion, and account for offset and bias-current errors at the selected gain.

⚡

Power-Supply Feedback and Monitoring

The LM2904P-MAND can monitor a supply rail or participate in a feedback-control loop in industrial power systems using its two independent amplifier channels. One section may buffer a divided feedback signal, while the other can amplify the error against a reference for an analog control function. The 26 V supply rating is useful when the amplifier operates from a nominal 24 V industrial bus with appropriate protection, and 700 kHz bandwidth is sufficient for many slow regulation loops. Do not exceed the absolute supply limit, include input filtering for switching-node coupling, and ensure the feedback divider keeps the amplifier input within its common-mode range at startup and during fault conditions.

What is LM2904P-MAND?
The LM2904P-MAND is a Texas Instruments dual general-purpose operational amplifier with two independent amplifiers, a 26 V maximum supply rating, and a 700 kHz gain-bandwidth product. According to the manufacturer product page, the family is designed for automotive and industrial control systems and is available in an 8-pin PDIP package. The dual configuration provides two independent amplifier channels in one through-hole package.
What are the key specifications of LM2904P-MAND that engineers should know?
The principal specifications are a 26 V maximum supply rating, 700 kHz gain-bandwidth product, two independent internally frequency-compensated amplifiers, and an 8-pin PDIP package. The Texas Instruments product page identifies the LM2904 as a dual operational amplifier intended for automotive and industrial control systems. Internal frequency compensation reduces the external components normally required to stabilize many general-purpose amplifier stages.
Is the LM2904P-MAND pin compatible with LM2904P?
Yes, the LM2904P-MAND is identified as an 8-pin PDIP general-purpose dual amplifier, matching the LM2904P package configuration described in distributor and manufacturer listings. The two amplifiers retain the same functional channel count and supply rating. Verify the ordering codes and manufacturer datasheet before production use if your design depends on exact pin assignment, qualification status, or manufacturing details.
What is the LM2904P-MAND pinout?
The LM2904P-MAND uses the standard 8-pin PDIP dual-amplifier arrangement: pins 1 and 7 are amplifier outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is the negative supply or ground connection, and pin 8 is the positive supply connection. Use the manufacturer pin-description table when assigning PCB tracks and decoupling connections.
Where can I download the LM2904P-MAND datasheet PDF?
The authoritative LM2904 family documentation is available through the Texas Instruments product page at https://www.ti.com/product/LM2904. From that page, open the device documentation for the LM2904 family and select the ordering-information link for LM2904P-MAND. The manufacturer page is the preferred source for electrical characteristics, package drawings, pin assignments, ordering information, and qualification details.
Where can I buy LM2904P-MAND online?
Use the Request a Quote form on this page to request LM2904P-MAND availability, current commercial terms, and a shipment quotation. The form is the direct route for this exact ordering code and helps prevent confusion with the closely related LM2904P and LM2904ANG variants. Confirm the requested package suffix and quantity with the supplier before releasing a purchase order.
What is the price of LM2904P-MAND?
The current commercial price is not shown in this page’s static text because quotations can change with quantity, package, and market conditions. Submit the exact MPN through the Request a Quote form on this page to obtain current unit terms and extended pricing. Specify the required quantity and delivery location so the quotation reflects the intended order configuration.
What is the lead time for LM2904P-MAND?
Lead time depends on the manufacturer’s current inventory and the quantity being ordered. Request a quote for LM2904P-MAND through the Request a Quote form on this page and include your required quantity, target date, and permissible delivery country. The supplier can then confirm current availability and a realistic manufacturing or allocation schedule for the exact ordering code.
Is LM2904P-MAND in stock?
Current stock for the exact LM2904P-MAND ordering code should be confirmed through the Request a Quote form on this page. Inventory can vary between the base LM2904P device and related ordering variants, so an availability statement for another suffix may not cover this part. Include your required quantity and schedule with the request to receive an actionable response.
What can replace LM2904P-MAND?
The closest documented drop-in choices include LM2904P from Texas Instruments, LM2904ANG from Texas Instruments, and LM2904P from STMicroelectronics when each candidate is confirmed in the 8-pin PDIP configuration. The cross-reference records identify LM2904-family substitutes, but production selection should verify pinout, supply range, bandwidth, offset voltage, output drive, and qualification for the intended application.
Is LM2904P-MAND the same as LM2904P?
The LM2904P-MAND and LM2904P are both identified as Texas Instruments 8-pin PDIP dual general-purpose operational amplifiers, but an ordering suffix can encode procurement or manufacturing conditions. The verified 26 V supply rating and 700 kHz gain-bandwidth rating are associated with the LM2904 family. Review the manufacturer ordering table for the exact MAND suffix before treating the parts as fully interchangeable.
LM2904P-MAND vs LM2904ANG - which is better for an industrial control design?
Choose the candidate whose ordering documentation confirms every electrical and qualification requirement for the control design. Both parts belong to the LM2904 family and are associated with 8-pin PDIP implementations, but the available comparison information does not establish a complete advantage for either ordering code. Check input offset, common-mode range, output swing, noise, temperature grade, and lifecycle status before final selection.
When should I choose LM2904P-MAND over another dual op amp?
Choose LM2904P-MAND when the design needs a through-hole dual operational amplifier, a 26 V-class supply environment, and approximately 700 kHz closed-loop bandwidth for general-purpose signal conditioning or control functions. It is less suitable when low-voltage rail-to-rail precision, very low offset, high output current, or a surface-mount footprint is the dominant requirement. Those constraints should be compared against the selected alternative’s specifications.
Is LM2904P-MAND suitable for sensor signal conditioning?
Yes, LM2904P-MAND is suitable for many general-purpose sensor-conditioning circuits because it provides two independent, internally frequency-compensated amplifiers with 700 kHz gain-bandwidth performance. The 26 V supply rating is useful in industrial systems with higher signal or supply voltages. Confirm the sensor output range, required input common-mode voltage, source impedance, and acceptable offset before selecting the closed-loop gain.
What are the best cross-brand equivalents for LM2904P-MAND?
STMicroelectronics LM2904P is the clearest cross-brand family equivalent identified for the dual, 8-pin PDIP general-purpose amplifier position. The available cross-reference results also point to Renesas, Analog Devices, Burr-Brown, National Semiconductor, NJRC, Philips, and Toshiba alternatives, but their exact orderable MPNs and package assignments require separate verification. Only a confirmed same-footprint, pin-compatible candidate should be used as a drop-in replacement.

داده‌های مرجع مهندسی برای LM2904P-MAND — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose LM2904P-MAND when the board requires a dual general-purpose operational amplifier in an 8-pin PDIP footprint, operates within the LM2904 family’s 26 V supply class, and can operate with approximately 700 kHz gain-bandwidth performance. Select LM2904P from Texas Instruments when procurement simplicity within the base family ordering code is preferred, provided the exact ordering table matches the application. Consider LM2904ANG only after checking its detailed electrical limits and ordering status. The STMicroelectronics LM2904P is a viable cross-brand review candidate when the exact 8-pin PDIP implementation and critical parameters are confirmed. For designs requiring four amplifier channels, a quad package such as LM324KAPWR may reduce package count but changes the footprint and board layout. In every case, verify supply voltage, common-mode range, output swing, offset, bandwidth, noise, temperature range, and qualification before approving a substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول LM2904P LM2904ANG LM2904P
Brand Texas Instruments Texas Instruments Texas Instruments STMicroelectronics
Package 8-PDIP 8-PDIP 8-PDIP 8-PDIP
Amplifier Configuration Dual Dual Dual Dual
Maximum Supply Voltage 26 V 26 V 26 V 26 V
Number of Independent Amplifiers 2 2 2 2

تفاوت‌های کلیدی

  • Maintains the same verified 26 V supply class as the closest same-brand candidates (در مقابلLM2904P)
  • Provides two independent amplifier channels in one through-hole package (در مقابلLM324KAPWR)
  • Offers a 700 kHz gain-bandwidth product for general-purpose control signals (در مقابلLM2904ANG)

یادداشت‌های طراحی

Treat the two amplifier channels as separate signal paths even though they share one package. Keep high-impedance input traces away from OUT1, OUT2, and switching inductors, and avoid routing input and output paths in parallel to minimize capacitive coupling. Place the supply bypass capacitor close to pin 8 and the ground return close to pin 4 so switching-current loops do not share sensitive signal-ground paths.

Do not treat the 26 V family rating as a recommended operating point. The design must remain below the maximum supply voltage with transient margin, and protection may be required for industrial or automotive transients. Also verify the input common-mode range, output swing, source impedance, and load drive at the intended gain before finalizing the schematic.

Calculate the closed-loop bandwidth from the 700 kHz gain-bandwidth value and the selected noise gain. The signal source should present an impedance low enough for the amplifier input stage, and the load should not exceed the output-drive capability. For filtering applications, simulate component tolerances and source/load parasitics to check for unexpected peaking near the intended cutoff.

Use the manufacturer package drawing to preserve the 8-pin PDIP footprint and observe the notch or pin-1 orientation during assembly. Avoid excessive thermal exposure during manual soldering because the through-hole package can move before the joints cool. Maintain adequate spacing around the package for inspection and rework, particularly in densely populated control boards.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The LM2904 family is identified for automotive and industrial control applications, but no exact RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement was confirmed for LM2904P-MAND. Confirm the exact ordering code in the manufacturer product documentation before qualification.

تاریخ تأیید داده‌ها: 2026-11-17 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LM2904P-MAND datasheet LM2904P-MAND pdf lm2904p datasheet lm2904 pdf LM2904P-MAND pinout LM2904P-MAND equivalent LM2904P-MAND replacement LM2904P-MAND price LM2904P-MAND stock Texas Instruments LM2904P-MAND LM2904P-MAND 26V 700kHz LM2904P-MAND 8-PDIP LM2904P-MAND vs LM2904P LM2904P-MAND industrial control LM2904P-MAND drop-in replacement

قطعات و اصطلاحات مرتبط

Texas Instruments LM2904P-MAND LM2904 LM2904P LM2904ANG STMicroelectronics dual operational amplifier general-purpose amplifier analog integrated circuit signal conditioning closed-loop control gain-bandwidth product 700 kHz 26 V maximum supply rating internal frequency compensation common-mode input range input offset voltage 8-pin PDIP through-hole package industrial control systems automotive control systems active filter current-sense amplifier power-supply feedback sensor interface
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ