onsemi

LM324ADTBR2 - Quad 3-26V Op Amp, 14-TSSOP | onsemi

MPN: LM324ADTBR2 ✓ فعال
3 V to 26 V Vdss 14-pin TSSOP Package
حداقل سفارش: 1 |

LM324ADTBR2 نمای کلی

The onsemi LM324ADTBR2 is a low-cost quad operational amplifier with four true differential-input amplifiers in a 14-pin TSSOP package. The device operates from 3 V to 26 V, supports supply voltages up to 32 V, and has a listed input offset voltage of 3 mV. Its four-amplifier configuration allows one package to implement four independent analog signal-conditioning channels.

An operational amplifier is a high-gain analog amplifier intended for closed-loop signal conditioning. The LM324 belongs to the broader operational amplifier, analog amplifier, and integrated-circuit hierarchy. Its differential inputs compare two voltages and drive an output according to the feedback network. True differential inputs are particularly useful in single-supply circuits, where an input signal can be referenced near ground without requiring a split bipolar power supply.

The principal characteristics include four amplifiers per package, a 3 V to 26 V operating range, 3 mV input offset voltage, and approximately 0.6 V/us slew rate. The 14-TSSOP package provides a compact surface-mount format for general-purpose analog designs. The manufacturer identifies the LM324 series as a low-cost family with true differential inputs and several advantages over standard operational-amplifier types in single-supply applications.

Each amplifier can be configured for voltage amplification, buffering, summing, filtering, or differential signal conditioning when suitable external resistors and capacitors are used. Because the LM324 contains four independent channels, designers can reduce component count in multi-channel instrumentation, sensor-conditioning, and feedback-control circuits. Independent channels also provide flexibility when different stages require different gain values or operating conditions.

Typical uses include low-cost sensor interfaces, analog measurement chains, audio and communication equipment, power-supply feedback, and industrial control modules. In each case, the designer must verify input common-mode range, output swing, gain-bandwidth behavior, input bias current, and stability for the selected feedback network before releasing a production design.

The main design consideration is the input common-mode range. A signal-sensing circuit should keep both inputs inside the amplifier's permitted common-mode window throughout its operating range. Decoupling capacitors should be placed close to the supply pins, while resistor and capacitor values should be calculated for the intended gain and bandwidth rather than copied without verification.

This page consolidates electrical characteristics, package details, application guidance, practical design considerations, and qualified drop-in comparison information for engineers evaluating the LM324ADTBR2.

جایگزین‌های drop-in برای LM324ADTBR2 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM324ADTBR2 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Amplifier Type, Input Type, Supply Voltage Range.

onsemi
Amplifier Type: General-purpose quad operational amplifier
Input Type: True differential inputs
Supply Voltage Range: 3 V to 32 V
مقایسه با LM324ADTBR2 →

LM324ADTBR2G

✅ جایگزین مستقیم
onsemi
📦 14-pin TSSOP
General-purpose quad operational amplifier · 4 channels · 3 V to 32 V · Single supply · True differential inputs · 0.6 V/us · 3 mV · 14-pin TSSOP

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM324ADTBR2 حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type General-purpose operational amplifier
Number of Amplifiers 4 circuits
Input Type True differential input
Supply Voltage Range 3 V to 26 V
Maximum Supply Voltage 32 V
Differential Supply Voltage ±16 V
Input Offset Voltage 3 mV
Slew Rate 0.6 V/us
محدوده دمای کاری -40 °C to +105 °C
بسته‌بندی 14-pin TSSOP
نوع نصب Surface mount
Shipping Format Tape and reel

راهنمای پیکربندی پین LM324ADTBR2 14-pin tssop

پیکربندی پین برای LM324ADTBR2 (پکیج 14-pin tssop). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 14-pin tssop برای LM324ADTBR2

داده پین‌آوت تفصیلی موجود نیست برای LM324ADTBR2.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LM324ADTBR2 مناسب است برای 6 کاربردs: Single-Supply Sensor Conditioning, Industrial Control and Instrumentation, Audio Preamplifier and Mixer, Power-Supply Feedback and Monitoring, Communications Interface Circuitry, General-Purpose Buffering and Active Filtering.

🧩

Single-Supply Sensor Conditioning

The LM324ADTBR2 fits four-channel sensor signal conditioning because each of its four amplifiers has true differential inputs and the device operates from 3 V to 26 V. A Wheatstone bridge, temperature sensor, or resistive sensor can feed a differential stage while the feedback network sets gain and bandwidth. The listed 3 mV input offset and 0.6 V/us slew rate must be compared with the sensor’s resolution and required settling time. Common-mode voltage remains the principal constraint: signals must remain inside the manufacturer’s permitted input range. The TSSOP package also permits placement near the sensor connector, reducing sensitive-signal trace length.

🏭

Industrial Control and Instrumentation

The four independent amplifiers in the LM324ADTBR2 allow a compact industrial control module to implement several low-level analog stages without using four separate packages. Typical channels include sensor amplification, actuator-error amplification, reference buffering, and feedback monitoring. Its 3 V to 26 V supply capability is useful for systems whose rail is above a conventional 5 V level, while the 14-pin TSSOP simplifies compact surface-mount assembly. Engineers should verify input bias current, output current capability, noise, and output swing against the selected sensor and actuator. Industrial temperature and electromagnetic-compatibility requirements should also be handled at the board and qualification levels.

🎧

Audio Preamplifier and Mixer

LM324ADTBR2 can implement four general-purpose audio preamplifier, summing, or mixing channels when the design does not require rail-to-rail operation or very low distortion. The true differential inputs support balanced source arrangements, and the 3 mV listed input offset is acceptable for many line-level and general audio paths. Its 0.6 V/us slew rate must be checked against the highest expected signal frequency and load. Input and output coupling networks should block DC, while feedback resistors determine gain and bandwidth. The TSSOP package helps reduce board area, although exposed-package soldering and thermal performance should be controlled during assembly.

⚡

Power-Supply Feedback and Monitoring

The LM324ADTBR2 can monitor a regulated rail and amplify the difference between a feedback divider and a reference. One channel may serve the main feedback amplifier, while additional channels monitor input voltage, output current, or fault signals. Its 3 V to 26 V operating range allows use in 5 V, 12 V, and 24 V systems, but the input common-mode range must cover the feedback-node voltage. The 3 mV listed offset contributes directly to output-power accuracy, so divider tolerances and precision-resistor requirements should be evaluated together. A 14-pin TSSOP package allows the feedback electronics to be placed close to the power stage.

🌐

Communications Interface Circuitry

LM324ADTBR2 is applicable to low-speed communications interfaces that need multiple buffering, gain, level-shifting, or receive-path amplification functions. The quad configuration can reduce package count in equipment with several analog channels, and operation from 3 V to 26 V supports both compact and industrial supply systems. Designers must account for the 0.6 V/us slew rate, output settling, capacitive loading, and the non-rail-to-rail input or output behavior when defining logic thresholds. Proper grounding and short feedback paths are important for preserving signal integrity. A TSSOP package can shorten sensitive traces, although fanout and routing should remain consistent with the manufacturer’s land pattern.

🔧

General-Purpose Buffering and Active Filtering

The LM324ADTBR2 can provide four unity-gain buffers or four stages of an active filter when the signal bandwidth is within the amplifier’s capability. Voltage followers isolate higher-impedance sources from downstream loads, while repeated RC feedback networks can construct low-pass, high-pass, or band-pass sections. The 0.6 V/us slew rate places a practical ceiling on large-signal output transitions, and the 3 mV listed input offset affects DC accuracy in precision filter stages. Component tolerances, amplifier input bias current, and load capacitance should be considered together. Placing the active-filter components close to each associated amplifier minimizes parasitic feedback and improves channel matching.

What are the key specifications of LM324ADTBR2 that engineers should know?
The LM324ADTBR2 is a four-amplifier general-purpose operational amplifier in a 14-pin TSSOP package. According to the onsemi LM324 datasheet, it operates from 3 V to 26 V, supports maximum supply voltages of 32 V, and provides true differential inputs. Its listed input offset voltage is 3 mV, while the associated LM324A-series listing identifies a slew rate of 0.6 V/us. The four independent channels make the device useful for multi-stage general-purpose analog circuits.
What is the operating voltage of LM324ADTBR2?
The LM324ADTBR2 operates from 3 V to 26 V according to the onsemi LM324 datasheet. The same documentation identifies a 32 V maximum supply voltage and a differential operating capability of ±16 V. These ratings cover single-supply and dual-supply designs, although the allowable input common-mode voltage is a separate consideration and must remain within the limits stated in the manufacturer pin and electrical-characteristics tables.
Where can I download the LM324ADTBR2 datasheet PDF?
The LM324ADTBR2 datasheet and package information are available through the onsemi LM324-series datasheet mirror linked on this page. The document describes the family as low-cost, quad operational amplifiers with true differential inputs and includes the electrical characteristics needed for supply, offset, slew-rate, and common-mode checks. Before using the device in a new design, use the manufacturer document for the definitive ordering table, pin functions, test conditions, and package dimensions.
Where can I find the LM324ADTBR2 pinout?
The LM324ADTBR2 pinout is found in the pin-description section of the onsemi LM324-series datasheet. The device is packaged in a 14-pin TSSOP and contains four independent operational amplifiers. Use the manufacturer pin-description table when assigning each amplifier’s inverting input, non-inverting input, output, and supply pins. The exposed package drawing and land pattern should also be checked against the PCB footprint rather than inferred from the body dimensions alone.
Where can I buy LM324ADTBR2 online and request a quote?
Use the Request a Quote form on this page to inquire about LM324ADTBR2 availability, current commercial terms, and order requirements. The part is specified as a 14-pin TSSOP, tape-and-reel shipping configuration from onsemi. A purchase request should include the target quantity, delivery location, and any required date. The form is the appropriate channel for obtaining a current quotation and confirming the exact suffix and package configuration.
What is the price of LM324ADTBR2?
The current LM324ADTBR2 price depends on order quantity, delivery terms, and market conditions. Use the Request a Quote form on this page for a current quotation tied to the exact onsemi MPN and 14-pin TSSOP configuration. Confirm the quantity breaks, availability, and any applicable shipping or tax requirements when the quotation is returned. This avoids relying on a stale historical price or confusing LM324ADTBR2 with a related suffix that has different order codes.
What is the lead time for LM324ADTBR2?
The current lead time for LM324ADTBR2 should be requested through the Request a Quote form on this page. Lead time can vary with quantity, factory allocation, and required delivery date, so a confirmed quantity and destination are needed for an actionable schedule. The component is listed for tape-and-reel shipment in a 14-pin TSSOP package. Treat any lead-time statement as order-specific until it is confirmed in the quotation.
Is LM324ADTBR2 in stock?
LM324ADTBR2 availability should be confirmed through the Request a Quote form on this page. The listing identifies the onsemi component as a 14-pin TSSOP general-purpose quad operational amplifier, but current inventory can change with order size and market activity. Provide the required quantity and delivery date so the quotation can reflect actual availability rather than an unqualified stock statement.
What is the best drop-in replacement for LM324ADTBR2?
LM324ADTBR2G is the closest identified same-brand alternative because it is listed as an onsemi LM324A-series device in a 14-pin TSSOP package with the same 3 V to 32 V class of single-supply operation. According to the LM324A-series datasheet listing, it also provides a 0.6 V/us slew rate. Final qualification still requires checking exact offset limits, common-mode range, output swing, AEC-Q100 status, and manufacturer ordering codes.
Can LM324ADTBR2G replace LM324ADTBR2?
LM324ADTBR2G can be considered a candidate drop-in replacement for LM324ADTBR2 because both are listed as onsemi LM324A-family quad amplifiers in 14-pin TSSOP packages. Their published family characteristics include single-supply operation up to 32 V and 0.6 V/us slew rate, indicating no documented electrical-rate difference in the cited listings. Before substitution, verify the exact offset-voltage grade, temperature grade, qualification status, and shipping suffix in the manufacturer ordering table.
What can replace LM324ADTBR2 in a general-purpose amplifier circuit?
The identified replacement candidate is LM324ADTBR2G, which shares the onsemi LM324A family and 14-pin TSSOP format. It is suitable for consideration when the existing circuit uses standard voltage-feedback feedback and does not depend on a missing temperature, offset, or qualification grade. According to the LM324A-series datasheet listing, the replacement retains true differential inputs and a 0.6 V/us slew rate. Validate stability, common-mode range, and output loading in the target circuit.
Is LM324ADTBR2 the same as LM324AMX/NOPB?
LM324ADTBR2 and LM324AMX/NOPB are not a same-package drop-in pair because their package descriptions differ: LM324ADTBR2 is a 14-pin TSSOP, while the comparison listing identifies LM324AMX/NOPB as an SOIC-style alternative. They may belong to the same broad LM324 application family, but changing body width, lead pitch, or lead geometry requires a PCB footprint review. Use LM324ADTBR2G or another verified 14-pin TSSOP part when board-level drop-in replacement is mandatory.
LM324ADTBR2 vs LM324KAPWR: which is better for an existing TSSOP design?
LM324ADTBR2 is the appropriate choice when the PCB already expects a 14-pin TSSOP footprint because LM324KAPWR is identified in comparison listings with a different VQFN-style package. The functional pin arrangement may belong to the same broad amplifier family, but a different lead geometry is not a drop-in PCB replacement. LM324KAPWR can suit a new VQFN layout, while LM324ADTBR2 avoids footprint conversion for the existing TSSOP board.
When should I choose LM324ADTBR2 over another quad operational amplifier?
Choose LM324ADTBR2 when a design needs four general-purpose true-differential-input amplifiers in a compact 14-pin TSSOP package and can operate within a 3 V to 26 V supply range. It is particularly appropriate for cost-sensitive, non-specialty analog signal conditioning where the 3 mV listed input offset and 0.6 V/us slew rate are adequate. For precision, high-speed, low-offset, rail-to-rail, or automotive-qualified requirements, verify those specifications before selecting the LM324.
Is LM324ADTBR2 suitable for single-supply sensor and audio circuits?
LM324ADTBR2 is suitable for many single-supply sensor-conditioning and general audio interface circuits because it provides four true-differential-input amplifiers and operates from 3 V to 26 V. According to the onsemi LM324 datasheet listing, the LM324 series was designed with advantages for single-supply applications. The selected feedback network must keep signals inside the input common-mode range, and the output must remain within the device’s specified swing at the chosen load.

داده‌های مرجع مهندسی برای LM324ADTBR2 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose LM324ADTBR2 for cost-sensitive, general-purpose analog designs that need four true-differential-input amplifiers in a 14-pin TSSOP footprint. It is suitable for single-supply sensor conditioning, feedback control, buffering, and general audio circuitry when 3 mV input offset and 0.6 V/us slew rate meet the design requirements. LM324ADTBR2G is the closest identified drop-in candidate because the listed family characteristics and TSSOP package align with the target; confirm exact grade limits before substitution. LM324AMX/NOPB is better considered only when the PCB can change to its different package. LM324KAPWR requires a VQFN-style layout. For precision, low-offset, high-speed, rail-to-rail, or automotive-qualified systems, select a more specialized amplifier instead of assuming generic LM324 equivalence.

مقایسه با جایگزین‌ها

پارامتر این محصول LM324ADTBR2G
Package 14-pin TSSOP 14-pin TSSOP
Brand onsemi onsemi
Amplifier Count 4 circuits 4 circuits
Operating Supply Range 3 V to 26 V 3 V to 32 V
Maximum Supply Voltage 32 V 32 V
Slew Rate 0.6 V/us 0.6 V/us
Input Type True differential input True differential input

تفاوت‌های کلیدی

  • Four true-differential amplifiers in one compact package (در مقابلLM324AMX/NOPB)
  • Identified same-package onsemi alternative (در مقابلLM324ADTBR2G)
  • Single-supply operation aligned with 24 V industrial rails (در مقابلLM324AMX/NOPB)

یادداشت‌های طراحی

Check the input common-mode range before accepting a new circuit. The 3 V to 26 V supply rating does not imply that the amplifier inputs can follow the full supply voltage. Bias the input network so both inputs remain within the range stated in the onsemi LM324 datasheet at the minimum supply, maximum signal, and highest expected temperature. This is especially important for battery-powered and 3.3 V designs where a nominal midpoint can exceed the permitted common-mode window.

Place input, output, feedback, and bypass components close to their associated TSSOP pins. Keep supply decoupling traces short and use a compact ground reference to reduce parasitic inductance. Because the package contains four amplifiers, number the channels in the schematic and PCB consistently so feedback does not cross between sections. Use the manufacturer land pattern and paste geometry for assembly rather than estimating dimensions from the package drawing.

Calculate the required settling time from the intended closed-loop bandwidth and the listed 0.6 V/us slew rate. A low-frequency gain stage may be satisfactory, while a higher-bandwidth design can become slew-rate limited before reaching its small-signal bandwidth limit. Keep feedback resistors reasonably low where capacitive loading and parasitic capacitance are significant, and verify that the selected output load does not exceed the manufacturer’s specified operating conditions.

Decouple each supply rail locally and account for the total quiescent current of four amplifiers when sizing the supply path. The 3 mV listed input offset affects DC accuracy directly, so divider and feedback-resistor tolerances can be as important as the amplifier offset. For instrumentation designs, calculate the full error budget from sensor tolerance, resistor tolerance, input bias effects, output swing, and the LM324’s offset specification rather than treating the amplifier as an ideal component.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No target-specific compliance declaration was identified. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status with onsemi before release to production.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LM324ADTBR2 datasheet LM324ADTBR2 pinout LM324ADTBR2 datasheet pdf LM324ADTBR2 equivalent LM324ADTBR2 replacement LM324ADTBR2 cross reference LM324ADTBR2 price LM324ADTBR2 stock onsemi LM324ADTBR2 LM324ADTBR2 14-TSSOP LM324ADTBR2 vs LM324KAPWR LM324ADTBR2 vs LM324AMX/NOPB

قطعات و اصطلاحات مرتبط

onsemi LM324ADTBR2 LM324ADTBR2G LM324AMX/NOPB LM324KAPWR quad operational amplifier true differential input general-purpose amplifier analog amplifier integrated circuit semiconductor input offset voltage slew rate single-supply operation input common-mode range TSSOP-14 TSSOP package family surface-mount technology sensor signal conditioning power-supply feedback active filtering audio preamplifier industrial instrumentation
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ