onsemi

LM324DTBG - Quad 3-32V Op Amp | onsemi | TSSOP-14

MPN: LM324DTBG ✓ فعال
3 V to 32 V Vdss 14-TSSOP, 0.173 inch / 4.40 mm width Package
حداقل سفارش: 1 |

LM324DTBG نمای کلی

onsemi LM324DTBG is a low-cost, general-purpose quad operational amplifier with four true differential-input amplifiers in a 14-pin TSSOP package. The device operates from 3 V to 32 V, delivers a gain-bandwidth product of 1 MHz, and provides a slew rate of 0.6 V/µs. Its input offset voltage is specified at 5 mV, making it suitable for general instrumentation, buffering, and signal-conditioning circuits that do not require rail-to-rail precision.

A quad operational amplifier combines four independent amplifier sections in one package. An operational amplifier is a voltage-feedback amplifier whose differential input is amplified by a high open-loop gain. The LM324 belongs to the broader hierarchy of analog signal-chain ICs, amplifier ICs, and general-purpose operational amplifiers. Four sections in one package reduce board area and can simplify designs requiring several low-frequency signal stages.

The LM324DTBG provides four amplifier circuits, a 1 MHz gain-bandwidth product, and a 0.6 V/µs slew rate. These characteristics suit audio-frequency control loops, sensor conditioning, low-frequency active filters, and general-purpose voltage amplification. The 3 V to 32 V supply range also supports single-supply operation from conventional 5 V and 24 V industrial rails, subject to the device's detailed operating limits.

The LM324 series uses true differential inputs, which is important when each amplifier receives two independently changing input voltages. A 5 mV input offset voltage characterizes the practical dc error around the signal path. The 1 MHz gain-bandwidth product limits the frequency range over which closed-loop gain can remain stable, while the 0.6 V/µs slew rate governs large-signal response. These are general-purpose figures rather than high-speed or precision-amplifier ratings.

Typical applications include four-channel sensor buffering, industrial control interfaces, low-frequency active filters, audio preamplifier stages, and general instrumentation. The same quad package can also implement four independent amplifier functions, such as comparator-style signal conditioning, differential-to-single-ended conversion, or distributed gain stages. Because the device is not specified as a rail-to-rail amplifier, input and output common-mode limits must be respected in each design.

For stable operation, follow the manufacturer datasheet when selecting input and output compensation components, grounding the unused amplifier sections, and setting gain through appropriate feedback networks. Keep sensitive input traces short, place bypass capacitance close to the supply pins, and verify common-mode and output-swing limits against the actual signal range. The TSSOP-14 footprint also requires adequate copper area and assembly-process clearance.

This product page combines the LM324DTBG electrical identity, package information, sourcing structure, comparison criteria, and practical design guidance. It helps engineers evaluate whether this 3 V to 32 V, 1 MHz quad operational amplifier is appropriate for a new design or an existing 14-TSSOP circuit before beginning detailed circuit simulation and qualification.

جایگزین‌های drop-in برای LM324DTBG — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM324DTBG (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Number of Amplifiers, Package, Packaging, Temperature Grade.

onsemi
Number of Amplifiers: 4 amplifiers
Package: 14-TSSOP, 0.173 in / 4.40 mm width
Packaging: Tape and reel
مقایسه با LM324DTBG →

LM324DTBR2G

✅ جایگزین مستقیم
onsemi
📦 14-TSSOP
General Purpose · 4 circuits · 4 amplifiers · 3 V to 32 V · 5 mV · 1 MHz · 0.6 V/µs · True differential inputs

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM324DTBG حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type General Purpose
Number of Amplifiers 4 circuits
Supply Voltage Range 3 V to 32 V
Gain-Bandwidth Product 1 MHz
Slew Rate 0.6 V/µs
Input Offset Voltage 5 mV
Input Type True differential inputs
بسته‌بندی 14-TSSOP, 0.173 inch / 4.40 mm width
نوع نصب Surface mount
Packaging Tube
Temperature Grade Commercial

راهنمای پیکربندی پین LM324DTBG 14-tssop, 0.173 inch / 4.40 mm width

پیکربندی پین برای LM324DTBG (پکیج 14-tssop, 0.173 inch / 4.40 mm width). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 14-tssop, 0.173 inch / 4.40 mm width برای LM324DTBG

داده پین‌آوت تفصیلی موجود نیست برای LM324DTBG.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LM324DTBG مناسب است برای 6 کاربردs: Industrial Sensor Signal Conditioning, Low-Frequency Active Filtering, Audio Preamplifier Stages, General-Purpose Instrumentation Buffering, Control-System Interface Circuits, Portable Battery-Powered Analog Front End.

🏭

Industrial Sensor Signal Conditioning

The LM324DTBG fits four-channel industrial sensor conditioning because it combines four true differential-input amplifiers, a 3 V to 32 V supply range, and a 1 MHz gain-bandwidth product in one 14-TSSOP package. Each section can buffer a transducer output before conversion or control circuitry, reducing board space while preserving a common amplifier topology. The 0.6 V/µs slew rate is adequate for many low-frequency sensors, while the 5 mV input offset rating must be weighed against measurement accuracy. Keep input traces short, reference the unused sections according to the datasheet, and confirm common-mode headroom before accepting sensor signals near either supply rail.

🔧

Low-Frequency Active Filtering

Each section of the LM324DTBG can implement a low-frequency active filter stage with a 1 MHz gain-bandwidth product and 0.6 V/µs slew rate. Four independent amplifiers allow a compact fourth-order or multi-band filter without requiring four separate packages, provided the closed-loop gain and stability requirements are satisfied. A 24 V industrial rail falls within the LM324DTBG's 3 V to 32 V operating range, although the signal must remain inside the amplifier's common-mode and output-swing limits. Use the manufacturer's recommended compensation for non-inverting and inverting topologies, and validate gain, phase margin, and output amplitude in simulation before fabrication.

🎧

Audio Preamplifier Stages

The LM324DTBG can provide low-frequency audio preamplification where four buffered signal paths are needed. Its 0.6 V/µs slew rate supports ordinary audio-band signals, and the 1 MHz gain-bandwidth product allows useful closed-loop gain at frequencies well above the audio band. The device is a general-purpose rather than low-noise audio amplifier, so input-referred noise and distortion should be checked against the system requirement. It is more appropriate for microphone preamplifier, line-level buffering, and headphone-driver support stages than for a demanding high-fidelity audio signal chain. Confirm output swing into the selected load and avoid relying on rail-to-rail behavior at low supply voltages.

🖥️

General-Purpose Instrumentation Buffering

The LM324DTBG is appropriate for instrumentation buffering when four measurement channels can share a general-purpose amplifier architecture. True differential inputs allow each amplifier to respond to the difference between two sensor or source nodes, while the 3 V to 32 V range supports both low-voltage and industrial supply environments. Its 5 mV input offset voltage is the primary accuracy consideration for precision measurements, so applications requiring tighter calibration should use a precision quad amplifier instead. Route high-impedance sources with short traces, guard sensitive inputs against leakage, and check bias-current effects using the detailed electrical characteristics in the onsemi LM324 datasheet.

⚡

Control-System Interface Circuits

The four amplifiers in the LM324DTBG can implement interface, error, drive, and signal-conditioning functions for a compact control system. A 3 V to 32 V supply range allows operation from a 5 V logic-oriented rail or a 24 V industrial bus-derived supply, provided regulation and transient requirements are met upstream. The 1 MHz bandwidth is suitable for many slow control loops, while the 0.6 V/µs slew rate determines how quickly the outputs can follow larger excursions. Common-mode range and output swing must be checked against sensor and actuator levels. A 14-TSSOP footprint saves board area, but thermal dissipation and assembly clearance remain important at sustained output loads.

📱

Portable Battery-Powered Analog Front End

The LM324DTBG can serve as a battery-powered analog front end when the design operates within its 3 V to 32 V supply range and accepts general-purpose accuracy. Four amplifier sections allow signal conditioning, gain, filtering, and output buffering in a compact surface-mount footprint. The 5 mV input offset rating should be compared with the smallest signal that must be resolved, while the 0.6 V/µs slew rate should be checked against the required waveform rise time. Low supply voltage also reduces available output swing and common-mode range, making bias-point analysis essential. Battery operation additionally requires attention to device quiescent current, leakage into high-impedance sources, and the resulting power budget.

What is the operating voltage of LM324DTBG?
The LM324DTBG operates from 3 V to 32 V according to the onsemi LM324DTBG product information. This range supports conventional 5 V single-supply systems as well as 24 V industrial rails. When using a supply near either limit, confirm the operating-temperature, common-mode input, output-swing, and electrical-current limits in the manufacturer datasheet before finalizing the power design.
What are the key specifications of LM324DTBG that engineers should know?
The LM324DTBG is a general-purpose quad operational amplifier with four circuits, a 3 V to 32 V supply range, a 1 MHz gain-bandwidth product, a 0.6 V/µs slew rate, and a 5 mV input offset voltage. It uses true differential inputs and is packaged in 14-pin TSSOP. According to the onsemi product information, these ratings position it as a general-purpose amplifier for low-frequency signal conditioning rather than a precision or high-speed device.
Where can I download the LM324DTBG datasheet PDF?
The LM324DTBG datasheet PDF can be accessed through the onsemi document link listed on this page or through the indexed LM324DTBG datasheet page. The manufacturer document describes the LM324 series as low-cost, quad operational amplifiers with true differential inputs. Use the manufacturer datasheet for the authoritative pin description, recommended operating conditions, electrical characteristics, and application information.
Where can I find the LM324DTBG pinout?
The LM324DTBG pinout is defined in the pin-description table of the onsemi LM324 series datasheet. The device is a 14-pin TSSOP containing four operational-amplifier sections. Use the datasheet pin table when assigning supply, input, output, and ground connections, and observe the package orientation and exposed thermal requirements exactly as shown in the manufacturer document.
Is LM324DTBG suitable for single-supply operation?
Yes, the LM324DTBG is suitable for single-supply operation within its 3 V to 32 V supply range. The LM324 series provides true differential inputs, an advantage in single-supply amplifier circuits where both inputs can move around a biased reference voltage. Confirm that the signal remains inside the common-mode input range and that the required output swing is available at the selected supply and load.
Can LM324DTBG replace LM324DTBR2G on the same PCB?
The LM324DTBG and onsemi LM324DTBR2G are identified in the cross-reference results as quad, general-purpose, 1 MHz, 14-TSSOP devices, indicating the same electrical class and package family. The ordering codes differ in their packaging arrangement, so engineers should confirm the incoming-device orientation, tape-and-reel versus tube presentation, and all temperature-grade markings before substitution.
What is the best drop-in replacement for LM324DTBG?
The onsemi LM324DTBR2G is the closest documented replacement candidate because it is a general-purpose quad operational amplifier with a 1 MHz gain-bandwidth product in a 14-TSSOP package. A true drop-in decision should also confirm pin assignment, supply range, offset voltage, slew rate, common-mode limits, and the required delivery format. The cross-reference data does not identify enough additional same-package candidates to claim a broader replacement list.
What can replace LM324DTBG?
LM324DTBR2G is a documented onsemi alternative for LM324DTBG because both are listed as quad general-purpose amplifiers with a 1 MHz gain-bandwidth product in 14-TSSOP packages. It is suitable for a replacement review when electrical limits and ordering code are confirmed. Other LM324-family parts should not be treated as drop-in alternatives unless their package, pinout, temperature grade, and electrical ratings match the existing design.
Is LM324DTBG the same as LM324DTBR2G?
The LM324DTBG and LM324DTBR2G are closely related onsemi LM324 variants with the same quad general-purpose amplifier configuration, 1 MHz gain-bandwidth product, and 14-TSSOP package class. They are not identical in every commercial detail because their suffix codes specify different ordering or packaging arrangements. Confirm the required package presentation and temperature designation before treating one as the drop-in choice for the other.
When should I choose LM324DTBG over another quad op amp?
Choose the LM324DTBG when a low-cost, four-section general-purpose amplifier with true differential inputs, a 3 V to 32 V supply range, and a 1 MHz gain-bandwidth product fits the design. It is preferable for straightforward buffering and low-frequency conditioning rather than rail-to-rail precision, very low offset, high-speed, or low-noise applications. Confirm common-mode range, output swing, offset, and stability requirements before final selection.
Is LM324DTBG suitable for sensor and instrumentation circuits?
Yes, the LM324DTBG is suitable for many low-frequency sensor and instrumentation circuits because it provides four true differential-input amplifiers in one 14-TSSOP package. Its 1 MHz gain-bandwidth product and 0.6 V/µs slew rate support general buffering and moderate-gain stages. The 5 mV input offset rating should be checked against the measurement accuracy required by the sensor front end.
What is the difference between LM324DTBG and a precision quad op amp?
The LM324DTBG is a general-purpose amplifier characterized by a 5 mV input offset voltage and a 1 MHz gain-bandwidth product, while precision quad amplifiers generally specify tighter offset and drift behavior. The LM324DTBG can still provide useful low-cost performance in sensor buffering, filters, and control circuits. Choose it when cost and general-purpose capability outweigh the tighter accuracy and noise requirements of a precision amplifier.
How much power does LM324DTBG dissipate?
LM324DTBG power dissipation depends on the actual supply voltage, output loading, quiescent current, ambient temperature, and copper area, so one fixed dissipation value cannot be assigned without the operating conditions. Calculate the total device loss from supply current multiplied by supply voltage, then compare the resulting junction-temperature estimate with the manufacturer thermal information. Use the TSSOP layout and exposed-package guidance in the datasheet.
Where can I buy LM324DTBG and what is its lead time?
Use the Request a Quote form on this page to ask for LM324DTBG availability, minimum order quantity, tube packaging, and current lead time. The onsemi ordering code LM324DTBG identifies the 14-TSSOP device in tube packaging. The manufacturer and distributor pages indicate that the component is actively cataloged, but current stock and delivery timing should be confirmed through the quote request.
What is the price and stock status of LM324DTBG?
Submit the Request a Quote form on this page for the current LM324DTBG price, stock position, tube quantity, and delivery schedule. The part is listed as a commercial-grade, 14-TSSOP, general-purpose quad operational amplifier, and distribution listings identify it as an onsemi catalog component. Dynamic commercial terms are handled through the quote form rather than fixed on the product page.

داده‌های مرجع مهندسی برای LM324DTBG — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LM324DTBG when the design needs four general-purpose amplifier sections, true differential inputs, operation from 3 V to 32 V, approximately 1 MHz bandwidth, and a compact 14-TSSOP footprint. It is a practical choice for industrial sensor conditioning, low-frequency filters, audio preamplifier stages, control interfaces, and battery-powered analog front ends where general-purpose accuracy is sufficient. Consider LM324DTBR2G when the onsemi 14-TSSOP electrical configuration is acceptable and its ordering or packaging format better matches production. Confirm the complete pinout, common-mode range, output swing, offset behavior, temperature grade, and stability requirements before replacement. Do not select a precision, rail-to-rail, or high-speed quad amplifier unless its specifications are needed, because the LM324DTBG's 5 mV offset and 0.6 V/µs slew rate establish the limits of its general-purpose performance class.

مقایسه با جایگزین‌ها

پارامتر این محصول LM324DTBR2G
Package 14-TSSOP 14-TSSOP
Brand onsemi onsemi
Amplifier Configuration Quad Quad
Number of Circuits 4 circuits 4 circuits
Amplifier Type General Purpose General Purpose
Gain-Bandwidth Product 1 MHz 1 MHz

تفاوت‌های کلیدی

  • Four general-purpose amplifiers are integrated into one 14-TSSOP package (در مقابلLM324DTBR2G)
  • Wide supply operating range supports low-voltage and industrial rails (در مقابلLM324DTBR2G)
  • Slew rate is specified for practical low-frequency signal movement (در مقابلLM324DTBR2G)
  • True differential inputs support direct difference-signal conditioning (در مقابلLM324DTBR2G)

یادداشت‌های طراحی

Do not assume that a quad operational amplifier can process signals at the full supply range. Before assigning the LM324DTBG to a sensor or control interface, compare the signal excursion with the input common-mode range and compare the required load current with the output-current and swing limits. The 5 mV input offset voltage also means that a small sensor signal may require a more accurate amplifier. Use the manufacturer datasheet for the exact bias-point and output-swing limits.

Place bypass capacitors close to the supply and ground pins, use a low-impedance ground plane, and keep each amplifier's feedback and compensation components close to its TSSOP pins. Treat the four amplifier sections independently: route the input and output of each section directly to its intended pins, and configure unused sections according to the onsemi recommendations. This prevents high-current output loops and switching-node paths from coupling into sensitive amplifier inputs.

Estimated: device power dissipation equals the average supply voltage multiplied by total supply current under the intended operating condition. These operating values are not specified here, so no fixed dissipation or junction-temperature result can be assigned. Calculate the loss for both idle and maximum-load states, then use the onsemi thermal information together with the actual TSSOP copper area to determine whether additional thermal spreading is required.

The 1 MHz gain-bandwidth product and 0.6 V/µs slew rate set the useful frequency and large-signal boundaries of the LM324DTBG. Avoid asking the device to deliver closed-loop gain or output amplitude beyond those limits, because the result can be gain compression, slew-rate distortion, or reduced stability margin. Simulate the complete feedback network with realistic loading, and include output-capacitance and parasitic effects when the amplifier drives cables or sampling stages.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The LM324 family appears in comparisons that mention RoHS and REACH, but an explicit status for this exact onsemi ordering code was not identified. AEC-Q100, lead-free, halogen-free, and conflict-minerals status therefore remain unknown.

تاریخ تأیید داده‌ها: 2026-11-17 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LM324DTBG datasheet LM324DTBG pinout LM324DTBG datasheet pdf LM324DTBG specifications LM324DTBG equivalent LM324DTBG replacement LM324DTBG drop-in replacement LM324DTBG vs LM324DTBR2G LM324DTBG price LM324DTBG stock onsemi LM324DTBG LM324DTBG TSSOP-14 LM324DTBG 1MHz op amp LM324DTBG sensor amplifier

قطعات و اصطلاحات مرتبط

onsemi LM324DTBG LM324DTBR2G LM324 quad operational amplifier operational amplifier amplifier IC analog signal-chain IC true differential input general-purpose amplifier 14-TSSOP TSSOP package family surface-mount package gain-bandwidth product slew rate input offset voltage common-mode input range industrial sensor conditioning active filtering audio preamplifier industrial control RoHS REACH single-supply operation
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ