LM358LVIDDFR - Dual 5.5V 1MHz Op Amp | Texas Instruments
MPN: LM358LVIDDFR ✓ فعالLM358LVIDDFR نمای کلی
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs. The LM358LV belongs to the broader hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor. Unlike an instrumentation amplifier or precision signal-chain amplifier, it is a general-purpose dual amplifier intended for common feedback, comparator-like, filtering, and signal-conditioning tasks where economical integration and low-voltage operation are the main priorities.
Key characteristics include two amplifier channels, a 5.5 V maximum supply rating, and 1 MHz gain-bandwidth capability. The dual-channel configuration reduces board area by combining two signal paths in one package. The TSOT-23-8 mechanical format is designed for surface-mount assembly and can support compact layouts when careful pad placement and trace routing are used. An operating temperature range of -40 °C to 125 °C supports industrial-temperature requirements.
The LM358LV product family is identified as an industry-standard, low-voltage operational-amplifier family that includes single, dual, and quad channel configurations. This system-level consistency allows designers to select channel count according to board-space and signal-path requirements while retaining a similar device concept. The target LM358LVIDDFR is the dual-channel TSOT-23-8 ordering variant.
Typical uses include low-voltage sensor conditioning, current-loop signal interfaces, audio preamplification, control-loop error amplification, active filtering, and general-purpose buffering. Because two independent amplifiers are integrated, the device can implement two related functions on one board, such as signal conditioning plus an active filter or two channels of an instrumentation interface.
Design consideration: keep input and feedback paths short, place input-biasing or compensation networks close to the associated pins, and verify common-mode and output-swing requirements across the complete 5.5 V system-supply range. The compact TSOT-23-8 package leaves little routing space, so stable reference planes and careful decoupling are especially important.
This product page organizes the confirmed electrical identity, package information, sourcing details, and design guidance for LM358LVIDDFR. It also distinguishes what is confirmed for this exact ordering code from characteristics that should be checked in the manufacturer datasheet before a production design is released.
جایگزینهای drop-in برای LM358LVIDDFR — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینLM358LVIDDFR حداکثر مقادیر مجاز و مشخصات الکتریکی
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| محدوده دمای کاری | -40 °C to 125 °C |
| Package Type | TSOT-23-8 |
| سبک نصب | Surface mount |
| Architecture | CMOS |
| Series | LM358LV |
| Product Family | LM321LV, LM358LV, LM324LV industry-standard low-voltage operational amplifiers |
| وضعیت RoHS | unknown |
| REACH Status | unknown |
راهنمای پیکربندی پین LM358LVIDDFR tsot-23-8
پیکربندی پین برای LM358LVIDDFR (پکیج tsot-23-8). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای LM358LVIDDFR.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
LM358LVIDDFR مناسب است برای 6 کاربردs: Low-Voltage Sensor Signal Conditioning, Industrial Control Feedback Amplifier, Portable Audio Preamplification, Active Filtering and Signal Shaping, Battery-Powered Monitoring Circuit, Embedded Interface Buffering.
Low-Voltage Sensor Signal Conditioning
The LM358LVIDDFR is suitable for conditioning signals from low-voltage sensors because its two channels can provide gain, buffering, or active filtering within a compact TSOT-23-8 footprint. The 1 MHz gain-bandwidth supports general-purpose conditioning networks operating below the device's full bandwidth limit, while the 5.5 V maximum supply is appropriate for systems with limited supply headroom. A common implementation places one channel in a non-inverting amplifier and uses the second for buffering or an additional gain stage. Verify the sensor output range against the input common-mode limits and confirm output swing at the selected supply voltage before laying out the circuit.
پیشنهادی
Industrial Control Feedback Amplifier
LM358LVIDDFR can support error and feedback amplification in low-voltage industrial control systems where two related amplifier functions must fit on a constrained board. One channel may amplify an error or sensor signal while the other buffers a reference or drives a feedback network. Its 1 MHz gain-bandwidth is suitable for conventional control-loop bandwidths, and the -40 °C to 125 °C operating range supports temperature-demanding equipment. Because the TSOT-23-8 package is compact, place feedback components directly beside their pins and route the control signal away from switching nodes to reduce coupling.
پیشنهادی
Portable Audio Preamplification
The LM358LVIDDFR can serve as a low-voltage audio preamplifier or line-stage buffer in portable equipment where supply voltage and board area are constrained. Its two channels allow stereo or two-stage amplification in one 8-pin TSOT-23 package, while the 1 MHz bandwidth covers conventional audio-band signal paths. Input and output coupling or gain-setting components should be placed close to the device to minimize unwanted coupling. Confirm the required output swing, input common-mode range, capacitive-load behavior, and noise performance against the manufacturer datasheet before using it in a high-fidelity signal path.
پیشنهادی
Active Filtering and Signal Shaping
LM358LVIDDFR is appropriate for general-purpose active-filter stages in low-voltage instrumentation and embedded systems. Two channels allow a first-order or modest higher-order network to be implemented while preserving a compact board area, and the 1 MHz gain-bandwidth provides useful bandwidth for audio- and control-rate signals. Component tolerances, gain error, and input bias current determine the achievable filter response. Keep each resistor and capacitor close to the relevant op-amp pins, maintain symmetrical routing where practical, and validate stability and frequency response with the actual source and load impedances.
پیشنهادی
Battery-Powered Monitoring Circuit
The LM358LVIDDFR fits battery-powered monitoring circuits that require two low-power analog channels without accepting a larger package. Its 5.5 V maximum supply rating accommodates low-voltage rails, while its two-channel integration can reduce component count compared with separate single amplifiers. The device can monitor one sensor and buffer a reference or provide a second conditioned measurement channel. Check the datasheet quiescent-current and shutdown characteristics before estimating battery life, and confirm that the input signal remains within the common-mode range as the battery voltage changes.
پیشنهادی
Embedded Interface Buffering
LM358LVIDDFR can buffer inputs and outputs in embedded control systems that operate from a low-voltage supply. One channel may buffer an analog input from a microcontroller or sensor, while the other drives a control, measurement, or communications interface. The 1 MHz gain-bandwidth is well suited to ordinary embedded signal paths, and the compact TSOT-23-8 format supports space-constrained boards. Design the interface around the documented input and output ranges, avoid excessive capacitive loading, and use short ground-return paths so output switching does not disturb the sensitive input channel.
پیشنهادی
دادههای مرجع مهندسی برای LM358LVIDDFR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Brand | Texas Instruments |
| Package | TSOT-23-8 |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| Operating Temperature Range | -40 °C to 125 °C |
| Amplifier Type | General-purpose operational amplifier |
| Architecture | CMOS |
| Series | LM358LV |
یادداشتهای طراحی
Place the power-supply bypass capacitor immediately beside the supply and ground pins, with the shortest practical ground return. Keep each amplifier's feedback resistors close to the output and inverting-input pins, and position input-biasing components near the associated input node. The TSOT-23-8 footprint has limited land area, so avoid routing unrelated high-current or switching traces between the two amplifier channels.
Do not treat the 5.5 V maximum supply rating as permission to exceed the input common-mode range or output-swing limits. Confirm both limits from the manufacturer datasheet for the intended supply voltage, and ensure the source impedance and capacitive load remain compatible with stable operation. Also verify that an SOIC, VSSOP, SC-70, or other LM358 variant is not assumed to be pin-compatible with the TSOT-23-8 footprint.
Estimate worst-case dissipation from the actual supply voltage and the combined current drawn by both channels plus output loading. The compact TSOT-23 package can limit heat dissipation when the device is close to maximum operating temperature or drives a DC load. Use the manufacturer thermal information for the exact package and board construction, preserve copper around the lands, and avoid placing the device beside a heat source without an airflow and temperature assessment.
اطلاعات انطباق
The available product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the confirmed product description identifies a general-purpose operational amplifier rather than an automotive-qualified variant.