LM358LVIDDFR - Dual 5.5V 1MHz Op Amp | Texas Instruments
MPN: LM358LVIDDFR ✓ Hoạt độngLM358LVIDDFR Tóm tắt
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs. The LM358LV belongs to the broader hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor. Unlike an instrumentation amplifier or precision signal-chain amplifier, it is a general-purpose dual amplifier intended for common feedback, comparator-like, filtering, and signal-conditioning tasks where economical integration and low-voltage operation are the main priorities.
Key characteristics include two amplifier channels, a 5.5 V maximum supply rating, and 1 MHz gain-bandwidth capability. The dual-channel configuration reduces board area by combining two signal paths in one package. The TSOT-23-8 mechanical format is designed for surface-mount assembly and can support compact layouts when careful pad placement and trace routing are used. An operating temperature range of -40 °C to 125 °C supports industrial-temperature requirements.
The LM358LV product family is identified as an industry-standard, low-voltage operational-amplifier family that includes single, dual, and quad channel configurations. This system-level consistency allows designers to select channel count according to board-space and signal-path requirements while retaining a similar device concept. The target LM358LVIDDFR is the dual-channel TSOT-23-8 ordering variant.
Typical uses include low-voltage sensor conditioning, current-loop signal interfaces, audio preamplification, control-loop error amplification, active filtering, and general-purpose buffering. Because two independent amplifiers are integrated, the device can implement two related functions on one board, such as signal conditioning plus an active filter or two channels of an instrumentation interface.
Design consideration: keep input and feedback paths short, place input-biasing or compensation networks close to the associated pins, and verify common-mode and output-swing requirements across the complete 5.5 V system-supply range. The compact TSOT-23-8 package leaves little routing space, so stable reference planes and careful decoupling are especially important.
This product page organizes the confirmed electrical identity, package information, sourcing details, and design guidance for LM358LVIDDFR. It also distinguishes what is confirmed for this exact ordering code from characteristics that should be checked in the manufacturer datasheet before a production design is released.
Bộ thay thế dễ dàng lắp đặt cho LM358LVIDDFR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếLM358LVIDDFR Tỷ lệ tối đa & tính chất điện
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| Khoảng nhiệt độ hoạt động | -40 °C to 125 °C |
| Package Type | TSOT-23-8 |
| Kiểu lắp đặt | Surface mount |
| Architecture | CMOS |
| Series | LM358LV |
| Product Family | LM321LV, LM358LV, LM324LV industry-standard low-voltage operational amplifiers |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
Hướng dẫn cấu hình chân LM358LVIDDFR tsot-23-8
Cấu hình chân cho LM358LVIDDFR (tsot-23-8 gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho LM358LVIDDFR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LM358LVIDDFR phù hợp cho 6 Áp dụngs: Low-Voltage Sensor Signal Conditioning, Industrial Control Feedback Amplifier, Portable Audio Preamplification, Active Filtering and Signal Shaping, Battery-Powered Monitoring Circuit, Embedded Interface Buffering.
Low-Voltage Sensor Signal Conditioning
The LM358LVIDDFR is suitable for conditioning signals from low-voltage sensors because its two channels can provide gain, buffering, or active filtering within a compact TSOT-23-8 footprint. The 1 MHz gain-bandwidth supports general-purpose conditioning networks operating below the device's full bandwidth limit, while the 5.5 V maximum supply is appropriate for systems with limited supply headroom. A common implementation places one channel in a non-inverting amplifier and uses the second for buffering or an additional gain stage. Verify the sensor output range against the input common-mode limits and confirm output swing at the selected supply voltage before laying out the circuit.
Được đề xuất
Industrial Control Feedback Amplifier
LM358LVIDDFR can support error and feedback amplification in low-voltage industrial control systems where two related amplifier functions must fit on a constrained board. One channel may amplify an error or sensor signal while the other buffers a reference or drives a feedback network. Its 1 MHz gain-bandwidth is suitable for conventional control-loop bandwidths, and the -40 °C to 125 °C operating range supports temperature-demanding equipment. Because the TSOT-23-8 package is compact, place feedback components directly beside their pins and route the control signal away from switching nodes to reduce coupling.
Được đề xuất
Portable Audio Preamplification
The LM358LVIDDFR can serve as a low-voltage audio preamplifier or line-stage buffer in portable equipment where supply voltage and board area are constrained. Its two channels allow stereo or two-stage amplification in one 8-pin TSOT-23 package, while the 1 MHz bandwidth covers conventional audio-band signal paths. Input and output coupling or gain-setting components should be placed close to the device to minimize unwanted coupling. Confirm the required output swing, input common-mode range, capacitive-load behavior, and noise performance against the manufacturer datasheet before using it in a high-fidelity signal path.
Được đề xuất
Active Filtering and Signal Shaping
LM358LVIDDFR is appropriate for general-purpose active-filter stages in low-voltage instrumentation and embedded systems. Two channels allow a first-order or modest higher-order network to be implemented while preserving a compact board area, and the 1 MHz gain-bandwidth provides useful bandwidth for audio- and control-rate signals. Component tolerances, gain error, and input bias current determine the achievable filter response. Keep each resistor and capacitor close to the relevant op-amp pins, maintain symmetrical routing where practical, and validate stability and frequency response with the actual source and load impedances.
Được đề xuất
Battery-Powered Monitoring Circuit
The LM358LVIDDFR fits battery-powered monitoring circuits that require two low-power analog channels without accepting a larger package. Its 5.5 V maximum supply rating accommodates low-voltage rails, while its two-channel integration can reduce component count compared with separate single amplifiers. The device can monitor one sensor and buffer a reference or provide a second conditioned measurement channel. Check the datasheet quiescent-current and shutdown characteristics before estimating battery life, and confirm that the input signal remains within the common-mode range as the battery voltage changes.
Được đề xuất
Embedded Interface Buffering
LM358LVIDDFR can buffer inputs and outputs in embedded control systems that operate from a low-voltage supply. One channel may buffer an analog input from a microcontroller or sensor, while the other drives a control, measurement, or communications interface. The 1 MHz gain-bandwidth is well suited to ordinary embedded signal paths, and the compact TSOT-23-8 format supports space-constrained boards. Design the interface around the documented input and output ranges, avoid excessive capacitive loading, and use short ground-return paths so output switching does not disturb the sensitive input channel.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho LM358LVIDDFR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Texas Instruments |
| Package | TSOT-23-8 |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| Operating Temperature Range | -40 °C to 125 °C |
| Amplifier Type | General-purpose operational amplifier |
| Architecture | CMOS |
| Series | LM358LV |
Ghi chú thiết kế
Place the power-supply bypass capacitor immediately beside the supply and ground pins, with the shortest practical ground return. Keep each amplifier's feedback resistors close to the output and inverting-input pins, and position input-biasing components near the associated input node. The TSOT-23-8 footprint has limited land area, so avoid routing unrelated high-current or switching traces between the two amplifier channels.
Do not treat the 5.5 V maximum supply rating as permission to exceed the input common-mode range or output-swing limits. Confirm both limits from the manufacturer datasheet for the intended supply voltage, and ensure the source impedance and capacitive load remain compatible with stable operation. Also verify that an SOIC, VSSOP, SC-70, or other LM358 variant is not assumed to be pin-compatible with the TSOT-23-8 footprint.
Estimate worst-case dissipation from the actual supply voltage and the combined current drawn by both channels plus output loading. The compact TSOT-23 package can limit heat dissipation when the device is close to maximum operating temperature or drives a DC load. Use the manufacturer thermal information for the exact package and board construction, preserve copper around the lands, and avoid placing the device beside a heat source without an airflow and temperature assessment.
Thông tin tuân thủ
The available product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the confirmed product description identifies a general-purpose operational amplifier rather than an automotive-qualified variant.