Texas Instruments

LM358LVIDGKR - Dual 5.5V Low-Voltage Op Amp | Texas Instruments

MPN: LM358LVIDGKR ✓ فعال
حداقل سفارش: 1 |

LM358LVIDGKR نمای کلی

The Texas Instruments LM358LVIDGKR is a dual, industry-standard low-voltage operational amplifier designed for operation from a single 2.5 V to 5.5 V supply or from split rails of plus or minus 2.75 V. Each amplifier provides a gain bandwidth product of 1 MHz and is packaged in an 8-pin VSSOP (DGK) surface-mount package. The two amplifiers share a common supply arrangement and are intended for cost-sensitive, low-voltage signal-conditioning applications.

An operational amplifier is an analog signal-processing building block that amplifies the voltage difference between its inverting and non-inverting inputs. A dual device such as the LM358LVIDGKR integrates two independent, internally compensated amplifiers into one package, reducing board area and component count when two gain stages are required. In the device hierarchy, the LM358LV belongs to the operational-amplifier class within analog and linear amplifiers, which are used to condition sensor, current-sense, audio, and control signals.

The family is identified as the LM3xxLV industry-standard low-voltage operational-amplifier series, which also includes the single LM321LV and quad LM324LV configurations. Key characteristics include a 1 MHz gain bandwidth product, operation to 5.5 V, low quiescent current, and high gain bandwidth relative to the original LM358 supply ratings. The dual configuration makes the device appropriate for two-amplifier signal chains, including transducer amplifiers, active filters, comparator-style threshold circuits, and low-frequency audio stages.

The LM358LV architecture provides the basic building blocks required for general-purpose analog design: two amplifiers, internal compensation, and common supply pins. Because the device is optimized for low-voltage systems, its operating region is centered on 3.3 V and 5 V rails rather than the plus or minus 15 V rails associated with the original LM358 family. Its 1 MHz bandwidth suits low-frequency and moderate-frequency conditioning rather than high-speed video or RF signal chains.

Typical uses include low-cost sensor interfaces, battery-powered measurement circuits, audio preamplifier stages, active filtering, and analog control loops. A single IC can implement a two-stage amplifier, a transimpedance amplifier followed by a gain stage, or separate inverting and non-inverting channels. The small VSSOP package also supports compact industrial and consumer control boards where a through-hole dual op amp would be unnecessarily large.

When laying out the circuit, keep feedback resistors and compensation capacitors close to the amplifier pins, and route the two channels to reduce differential crosstalk where they process unrelated signals. Confirm the required output-voltage swing, input-common-mode range, capacitive-load behavior, and supply current for the selected operating condition using the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins to suppress high-frequency supply noise.

This page consolidates the verified device identification, package information, technical characteristics, pin assignment, drop-in candidates, and application-level design guidance. It also provides a parameter comparison for selecting among same-footprint alternatives and highlights the practical trade-offs involved when replacing a general-purpose amplifier with a rail-to-rail or low-power device.

جایگزین‌های drop-in برای LM358LVIDGKR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM358LVIDGKR (همان فرم‌فاکتور و فوت‌پرینت).

LMV358IDGKR

✅ جایگزین مستقیم
📦 8-VSSOP (DGK)
Rail-to-rail input behavior differs from the LM358LV; same 8-VSSOP DGK footprint and 1 MHz bandwidth class, so bias and common-mode checks are required

📋 جایگزین مرجع (خارج از کاتالوگ)

TLV9002IDGKR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-VSSOP (DGK)
Lower-power rail-to-rail input architecture and different bias-current behavior versus the LM358LV; same 8-pin VSSOP footprint and dual-amplifier configuration

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP6002IDGKR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-VSSOP (DGK)
Rail-to-rail input and lower typical supply current versus the LM358LV, with different bias-current and common-mode characteristics; same 8-pin VSSOP outline

📋 جایگزین مرجع (خارج از کاتالوگ)

OPA2192IDGKR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 8-VSSOP (DGK)
2 (dual) · 4.5 V to 36 V · ±2.25 V to ±18 V · ±5 µV · ±25 µV · ±0.2 µV/°C · 10 MHz · 20 V/µs

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM358LVIDGKR حداکثر مقادیر مجاز و مشخصات الکتریکی

هیچ مشخصاتی موجود نیست

پیکربندی پین LM358LVIDGKR

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پین 1 OUTA — Amplifier A output
پین 2 INA- — Amplifier A inverting input
پین 3 INA+ — Amplifier A non-inverting input
پین 4 V- — Negative supply or ground connection
پین 5 INB+ — Amplifier B non-inverting input
پین 6 INB- — Amplifier B inverting input
پین 7 OUTB — Amplifier B output
پین 8 V+ — Positive supply connection

کاربردهای معمول

LM358LVIDGKR مناسب است برای 6 کاربردs: Low-Voltage Sensor Signal Conditioning, Battery-Powered Instrumentation, Active Audio Filters, Current and Voltage Monitoring, Control and Threshold Amplification, Industrial Interface Buffering.

🧩

Low-Voltage Sensor Signal Conditioning

The LM358LVIDGKR fits two-stage conditioning for resistive sensors, thermistors, and low-level analog sensors running from a 3.3 V or 5 V rail. Its 1 MHz gain bandwidth provides more bandwidth than many slow sensor signals require, while the dual amplifier can implement an instrumentation-style chain in a single 8-VSSOP package. Place the amplifier inputs over a quiet ground region and keep the high-gain feedback resistors close to the pins to limit parasitic coupling. Confirm that the sensor output remains within the input common-mode range at the chosen supply voltage, and verify the output swing before designing for near-rail inputs.

🔋

Battery-Powered Instrumentation

The LM358LVIDGKR suits portable measurement equipment operating from 2.5 V to 5.5 V because the LM358LV family targets low-voltage systems and combines two amplifiers in one compact VSSOP package. A dual implementation can provide a low-noise input stage and a following gain or filtering stage without adding a second package. The 1 MHz gain bandwidth supports moderate-bandwidth sensor signals while leaving useful margin above slow thermistor, pressure, and chemical-sensor bandwidths. Verify the quiescent current for the expected channel activity, and use separate analog and digital return paths to keep switching converter noise away from the amplifier inputs.

🎧

Active Audio Filters

The LM358LVIDGKR can implement first- or second-order active audio filters because each internally compensated amplifier provides a 1 MHz gain bandwidth product, far above the passbands of typical baseband audio systems. Two amplifiers in the DGK VSSOP package allow a Sallen-Key or multiple-feedback filter and an additional gain stage in one device. Keep resistor and capacitor loops compact around the relevant pins, and separate the two channels if they carry independent audio paths. Validate maximum output amplitude at the intended supply voltage because the available headroom is smaller than that of a plus or minus 15 V LM358 implementation.

⚡

Current and Voltage Monitoring

The LM358LVIDGKR is appropriate for general-purpose current or voltage monitoring when the measured signal stays inside the input common-mode range. One channel can amplify a shunt voltage while the other provides gain, buffering, or threshold amplification for a downstream controller. The 1 MHz bandwidth supports fast enough response for many power-monitoring loops without introducing the complexity of a high-speed amplifier. Place the shunt amplifier close to the sensing element, use Kelvin routing where practical, and keep high-current switching nodes away from the high-impedance input and feedback components.

🏭

Control and Threshold Amplification

The LM358LVIDGKR can amplify control-loop error signals and build threshold detectors around low-voltage sensors. Its two amplifiers allow an error amplifier and a comparator-like threshold stage to share one package, reducing board area in compact control systems. The 1 MHz bandwidth is more than adequate for slow thermal, fan-speed, motor-current, and process-control loops. Check the common-mode range and output swing at the chosen supply, and add hysteresis where noise at the threshold could cause repeated switching. The device is better suited to moderate-frequency regulation than to high-speed control loops requiring wider bandwidth.

🔌

Industrial Interface Buffering

The LM358LVIDGKR works as a general-purpose interface buffer between low-voltage sensors, analog switches, and a higher-level converter on industrial control boards. Two buffered inputs or outputs can be handled in one 8-VSSOP package, which simplifies assembly where board area is constrained. The LM358LV supply range supports 3.3 V and 5 V systems, and its 1 MHz bandwidth supports many industrial interface signals that do not require high-speed differential processing. Keep sensitive analog traces away from relay drivers, power switches, and digital timing nets, and provide local bypass capacitance at the supply pins for predictable transient response.

خلاصه محصولات پیشنهادی

TLV9002IDGKR Same-package dual amplifier for lower-power sensor conditioning استفاده‌شده در: Low-Voltage Sensor Signal Conditioning, Battery-Powered Instrumentation, Current and Voltage Monitoring, Control and Threshold Amplification OPA2192IDGKR Texas Instruments استفاده‌شده در: Low-Voltage Sensor Signal Conditioning, Active Audio Filters, Control and Threshold Amplification MCP6002IDGKR Low-voltage dual amplifier with rail-to-rail input capability استفاده‌شده در: Battery-Powered Instrumentation, Current and Voltage Monitoring, Industrial Interface Buffering LMV358IDGKR Same-package dual amplifier with rail-to-rail input operation استفاده‌شده در: Active Audio Filters, Industrial Interface Buffering
What is the operating voltage of LM358LVIDGKR?
The LM358LVIDGKR operates from 2.5 V to 5.5 V on a single supply or from split rails of plus or minus 2.75 V. According to the Texas Instruments LM3xxLV family documentation, the device is intended for low-voltage 3.3 V and 5 V systems. Its low-voltage supply range is the principal distinction from the original high-voltage LM358 family, so the rail arrangement should be checked against the input and output common-mode limits before it replaces a higher-voltage device.
What is the gain bandwidth product of LM358LVIDGKR?
The LM358LVIDGKR has a gain bandwidth product of 1 MHz per amplifier. Texas Instruments describes the LM358LV as an industry-standard low-voltage operational amplifier with high gain bandwidth for its supply class. A 1 MHz bandwidth is suitable for low-frequency analog conditioning, sensor interfaces, active filters, and audio preamplifier stages. It is not intended for high-speed video, high-frequency RF, or wideband data-acquisition front ends.
What package does LM358LVIDGKR use?
The LM358LVIDGKR is supplied in an 8-pin VSSOP package identified as DGK. The distributor listing identifies the device as a two-circuit amplifier in an 8-VSSOP. The exposed-lead VSSOP outline provides a compact surface-mount footprint, and the DGK ordering code identifies the tape-and-reel commercial package. Confirm the mechanical drawing and land pattern in the Texas Instruments package documentation before laying out a replacement board.
Where can I download the LM358LVIDGKR datasheet PDF?
The manufacturer datasheet is available from the Texas Instruments LM358LV documentation page at https://www.ti.com/lit/ds/symlink/lm358lv.pdf. It covers the LM321LV, LM358LV, and LM324LV low-voltage families, including the LM358LVIDGKR ordering option. Use the pin-description table, electrical characteristics, and recommended operating conditions when assigning pins and checking the design against the 5.5 V maximum supply.
Where can I find the LM358LVIDGKR pinout?
The LM358LVIDGKR pin assignment is shown in the pin-configuration section of the Texas Instruments LM3xxLV datasheet. The 8-pin VSSOP uses the familiar dual-op-amp arrangement: amplifier A occupies pins 1 through 4, amplifier B occupies pins 5 through 8, and the supply pins are at the ends of the package. Use the package drawing when assigning PCB tracks and verify the exact pin functions against the manufacturer diagram.
How many amplifiers and circuits are in LM358LVIDGKR?
The LM358LVIDGKR contains two independent operational amplifiers in one package. Texas Instruments classifies it as a dual general-purpose amplifier with two circuits, and distributor product data likewise identifies a two-circuit device. The amplifiers can perform separate functions, such as an inverting stage followed by a non-inverting stage, or they can implement two channels of the same analog signal path.
Is LM358LVIDGKR suitable for 3.3 V systems?
Yes, the LM358LVIDGKR is suitable for 3.3 V systems because its documented single-supply operating range is 2.5 V to 5.5 V. Texas Instruments positions the LM358LV as a low-voltage operational amplifier for portable instruments, battery-powered equipment, and other low-voltage systems. Verify the signal levels against the input common-mode range and output swing for 3.3 V operation before finalizing the biasing network.
What can replace LM358LVIDGKR on the same PCB?
The closest same-footprint candidates are dual amplifiers such as the LMV358IDGKR, TLV9002IDGKR, and MCP6002IDGKR, all of which use an 8-pin VSSOP arrangement. Pin compatibility alone does not guarantee interchangeability because input bias current, common-mode range, output swing, noise, and quiescent current can differ substantially. Perform a parameter review and update the bias resistors if the replacement changes its input architecture.
What is the best Analog Devices equivalent for LM358LVIDGKR?
The LM358LVIDGKR is a general-purpose, economy-focused low-voltage dual amplifier, so an Analog Devices equivalent should be selected by function rather than by the original LM358 name alone. Candidates in 8-pin VSSOP packages must be checked for the same pin arrangement, acceptable quiescent current, and adequate common-mode range at 2.5 V to 5.5 V. The Texas Instruments LMV358IDGKR is the closer documented same-package comparison; higher-precision amplifiers usually increase cost and quiescent current.
LM358LVIDGKR vs LMV358IDGKR - which is better for a low-voltage circuit?
Choose the LM358LVIDGKR for a cost-sensitive general-purpose design that needs only the LM358LV family functions, and choose the LMV358IDGKR when rail-to-rail input behavior or lower supply current is important. The LMV358IDGKR shares the 8-pin VSSOP format and the 1 MHz class of operation, but its input architecture changes common-mode behavior. Confirm the maximum input voltage, bias current, and output swing before treating it as a direct substitute.
When should I choose LM358LVIDGKR over a rail-to-rail op amp?
Choose the LM358LVIDGKR when the signal remains inside the input common-mode range and the design prioritizes a familiar general-purpose amplifier, low cost, and straightforward dual-channel implementation. A rail-to-rail input amplifier is preferable when the input can approach either supply rail or when the source impedance makes input bias current critical. The trade-off is that the LM358LVIDGKR is not optimized for rail-to-rail input operation.
Is LM358LVIDGKR suitable for audio applications?
The LM358LVIDGKR can be used for low-frequency audio preamplification and active-filter stages because its 1 MHz gain bandwidth exceeds the bandwidth of most baseband audio signal paths. Place the device where its output swing, input common-mode range, and channel-to-channel isolation are acceptable. For precision audio or headroom-limited designs, verify the rail-to-rail performance and noise of the selected amplifier against the LM358LV characteristics.
What are the key specifications of LM358LVIDGKR that engineers should know?
The LM358LVIDGKR is a dual, low-voltage operational amplifier with a 2.5 V to 5.5 V single-supply range, plus or minus 2.75 V split-rail capability, a 1 MHz gain bandwidth product, and an 8-pin VSSOP (DGK) package. Texas Instruments identifies it as an industry-standard LM3xxLV-family device with low quiescent current and high gain bandwidth. These are the primary selection parameters for supply topology, signal bandwidth, footprint, and thermal loading.
How should I decouple the LM358LVIDGKR power supply?
Place the supply-decoupling network directly across the LM358LVIDGKR supply pins and connect it to a low-impedance ground plane. A common arrangement is a small ceramic capacitor for high-frequency bypass in parallel with a bulk capacitor, with the shortest possible loop between the capacitor, the device, and ground. Keep the two amplifier feedback networks separate from the supply-return path where possible to reduce channel interaction and switching-noise pickup.
Is LM358LVIDGKR available in stock and what is its lead time?
Current stock and lead time should be confirmed through the Request a Quote form on this page. The device is listed by Texas Instruments as an active, low-voltage dual operational amplifier, and distributor listings identify the LM358LVIDGKR in the 8-VSSOP (DGK) package. Submit the required quantity, date code, and target price in the quote request to obtain the most current availability and delivery commitment.
Where can I buy LM358LVIDGKR online?
Use the Request a Quote form on this page to request LM358LVIDGKR pricing, stock, minimum order quantity, and lead time. The quote form is the fastest way to obtain current commercial terms for the exact 8-VSSOP (DGK) ordering code. Include your target quantity and any required date-code or traceability conditions so the request can be matched to the appropriate supply channel.

داده‌های مرجع مهندسی برای LM358LVIDGKR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LM358LVIDGKR for a cost-sensitive 3.3 V or 5 V circuit that needs two general-purpose amplifiers, a familiar 8-VSSOP footprint, and approximately 1 MHz of bandwidth. Choose the LMV358IDGKR when signals may approach a supply rail or when lower supply current is the main priority; review its input bias current before reusing the original resistor network. Choose the TLV9002IDGKR for a low-power design where the 1 MHz bandwidth class remains suitable and rail-to-rail input operation is valuable. Choose the MCP6002IDGKR for a compact 8-pin VSSOP design that prioritizes rail-to-rail input behavior, but confirm quiescent current and bias-current effects. Choose the OPA2192IDGKR when precision offset, lower bias current, or substantially higher bandwidth justifies the additional cost and supply capability. In every case, verify the common-mode range, output swing, stability, and noise before releasing the PCB.

مقایسه با جایگزین‌ها

پارامتر این محصول LMV358IDGKR TLV9002IDGKR MCP6002IDGKR OPA2192IDGKR
Package 8-VSSOP (DGK) 8-VSSOP (DGK) 8-VSSOP (DGK) 8-VSSOP (DGK) 8-VSSOP (DGK)
Brand Texas Instruments Texas Instruments Texas Instruments Microchip Technology Texas Instruments
Number of Amplifiers 2 2 2 2 2
Gain Bandwidth Product 1 MHz 1 MHz 1 MHz 1 MHz 10 MHz
Maximum Supply Voltage 5.5 V 5.5 V 5.5 V 5.5 V 36 V
Amplifier Type General Purpose General Purpose, Rail-to-Rail Input General Purpose, Rail-to-Rail Input General Purpose, Rail-to-Rail Input Precision

تفاوت‌های کلیدی

  • General-purpose low-voltage operation in a compact dual package (در مقابلOPA2192IDGKR)
  • Lower-voltage supply ceiling than the precision alternative (در مقابلOPA2192IDGKR)
  • Same-package rail-to-rail upgrade option (در مقابلLMV358IDGKR)
  • Direct 1 MHz bandwidth class across general-purpose alternatives (در مقابلMCP6002IDGKR)

یادداشت‌های طراحی

Place the supply-bypass capacitor directly across pins 4 and 8 of the LM358LVIDGKR, with a short ground return that does not share a narrow path with the amplifier outputs. Keep the feedback resistors, gain-setting resistors, and compensation capacitors close to their associated pins to minimize parasitic capacitance and feedback-loop instability. In dual-channel layouts, route the two channels separately when they carry unrelated signals, and provide a quiet analog ground region beneath the feedback networks.

Do not assume that any same-package dual amplifier is electrically interchangeable with the LM358LVIDGKR. The LMV358IDGKR, TLV9002IDGKR, and MCP6002IDGKR use rail-to-rail input architectures whose bias current and common-mode behavior differ from the LM358LV. Recheck the input bias network, maximum input voltage, output swing, capacitive-load behavior, and quiescent current. A PCB footprint match removes only the mechanical obstacle; it does not remove the circuit-level verification requirement.

For low-level sensor inputs, use short traces, guard routing where appropriate, and a single low-impedance analog-ground reference. Keep switching-node copper, relay-driver outputs, and high-current return paths away from the non-inverting inputs because their leakage can create errors larger than the intended sensor signal. If both channels amplify related signals, add physical separation between input networks to limit capacitive crosstalk, and test the assembled board with the sensor source disconnected before adding additional filtering.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No RoHS, REACH, halogen-free, or conflict-minerals declarations were identified for this ordering code. The LM358LV is a general-purpose analog amplifier rather than an automotive-qualified AEC-Q100 product.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LM358LVIDGKR LM358LVIDGKR datasheet LM358LVIDGKR datasheet pdf LM358LVIDGKR pinout LM358LVIDGKR equivalent LM358LVIDGKR replacement LM358LVIDGKR price LM358LVIDGKR stock LM358LVIDGKR vs LMV358IDGKR Texas Instruments LM358LVIDGKR LM358LV 8-VSSOP amplifier LM358LV low voltage op amp LM358LVIDGKR application circuit dual 5.5V 1MHz op amp DGK

قطعات و اصطلاحات مرتبط

Texas Instruments LM358LVIDGKR LM358LV LM3xxLV LMV358IDGKR TLV9002IDGKR MCP6002IDGKR OPA2192IDGKR operational amplifier dual op amp analog amplifier linear amplifier signal conditioning instrumentation amplifier gain bandwidth product 1 MHz 5.5 V plus or minus 2.75 V low quiescent current rail-to-rail input 8-VSSOP DGK package surface mount SMD RoHS REACH
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ