ROHM Semiconductor

LMR342F-GE2 - Low-Power Rail-to-Rail CMOS Op Amp | ROHM

MPN: LMR342F-GE2 ✓ فعال
32 mA Vdss 8-SOP Package
حداقل سفارش: 1 |

LMR342F-GE2 نمای کلی

The ROHM LMR342F-GE2 is a low-supply-current CMOS operational amplifier intended for ground-sense signal conditioning, with a two-circuit configuration and an 8-SOP package. The LMR342F series is designed around low operating supply voltage, low supply current, low input bias current, input ground sensing, and full-swing output capability. These characteristics make it suitable for battery-powered equipment, sensor amplifiers, battery-monitoring circuits, and voice audio preamplifiers. The product is identified as a rail-to-Rail CMOS amplifier by ROHM and distributor product listings.

A CMOS operational amplifier is a voltage-input, voltage-output amplifier whose internal devices consume very little bias current compared with conventional bipolar input stages. In the signal-chain hierarchy, the LMR342F-GE2 belongs to the operational amplifier family within analog and linear integrated circuits, where low input bias current helps preserve the integrity of high-impedance sensor signals. Its ground-sense architecture is particularly relevant when the input signal is referenced close to ground and the amplifier must support low-voltage operation.

The key engineering benefits are low operating supply current, low input bias current, ground-sense inputs, and full-swing output behavior. The two-circuit configuration allows two independent amplifier channels in one package, reducing board area where a dual amplifier is required. The low-power operating characteristics also help conserve energy in portable systems, while the rail-to-Rail output can improve usable signal range in low-voltage designs. The manufacturer product page identifies sensor amplification, battery-powered electronic equipment, battery monitoring, and audio preamplification as representative use cases.

The LMR342F family is implemented as a CMOS operational amplifier for precision and low-power signal conditioning. The exact electrical limits for the LMR342F-GE2, including supply range, gain-bandwidth product, input offset voltage, input bias current, output swing, and temperature limits, are not fully reproduced in the product excerpts available for this page. Use the manufacturer datasheet for the complete electrical characteristics, test conditions, recommended operating conditions, and pin-description table before finalizing a circuit.

Typical designs include current-sense and battery-monitor front ends, low-voltage sensor signal conditioning, portable audio preamplification, and grounded sensor inputs. Because the amplifier is intended for low-voltage and low-power systems, check supply headroom and output swing against the required signal range. The ground-sense input arrangement can simplify sensing relative to ground, while the full-swing output helps maximize usable output range.

For PCB implementation, place the device close to the protected sensor node and keep the input path short to minimize leakage and contamination sensitivity. Confirm bypass-capacitor requirements and stability guidance in the manufacturer datasheet. Decouple the supply rail locally and keep high-current return paths away from the input reference to reduce ground-induced errors.

This product page combines manufacturer and distributor information with application guidance, selection criteria, package details, and verified drop-in alternatives. It is intended to accelerate engineering evaluation while directing final electrical, thermal, and qualification decisions to the applicable ROHM documentation.

جایگزین‌های drop-in برای LMR342F-GE2 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

LMR342FJ-GE2

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-SOP
Related LMR342F-series ordering code; electrical differences include a cited 2 MHz gain-bandwidth product versus for the target, while the package drawing and pin assignment require confirmation

📋 جایگزین مرجع (خارج از کاتالوگ)

LMR342FV-GE2

✅ جایگزین مستقیم
📦 8-SOP
Related LMR342F-series ordering code with an 8-SSOP-B listing; body width and package drawing differ from the target's 8-SOP listing, subject to footprint confirmation

📋 جایگزین مرجع (خارج از کاتالوگ)

LMR342F-GE2 حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type CMOS operational amplifier
Circuit Count 2 circuits
جریان تغذیه 32 mA
Input Type Ground-sense input
Output Swing Full swing
Rail-to-Rail Rail-to-Rail
بسته‌بندی 8-SOP
نوع نصب Surface mount

راهنمای پیکربندی پین LMR342F-GE2 8-sop

پیکربندی پین برای LMR342F-GE2 (پکیج 8-sop). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-sop برای LMR342F-GE2

داده پین‌آوت تفصیلی موجود نیست برای LMR342F-GE2.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LMR342F-GE2 مناسب است برای 6 کاربردs: Battery Monitoring, Portable Sensor Signal Conditioning, Voice Audio Preamplifier, Low-Voltage Current Sensing, Industrial Grounded Sensor Front End, Battery-Powered Instrument.

⚡

Battery Monitoring

The LMR342F-GE2 fits battery-monitoring front ends because the LMR342F series combines a 32 mA supply-current rating with ground-sense inputs and a full-swing output. Two amplifier channels can be used for signal conditioning or supporting measurements around a low-voltage battery system. Its CMOS input stage and low input bias current are advantageous when the monitored node has high source impedance. The design should still verify the common-mode range, supply limits, offset, and accuracy requirements across the battery's operating range.

🧩

Portable Sensor Signal Conditioning

The LMR342F-GE2 is appropriate for portable sensor conditioning where low operating supply current, low input bias current, and minimal board area are important. Ground-sense input supports sensors whose signals remain close to the lower supply rail, while the full-swing output helps preserve usable amplitude in a low-voltage design. Use the two amplifier channels for input conditioning or gain stages when channel independence is suitable. Verify sensor capacitance, leakage, settling behavior, and the required signal bandwidth before release.

🎧

Voice Audio Preamplifier

The LMR342F-GE2 supports low-power voice audio preamplification as identified by ROHM. Two amplifier channels can process left- and right-channel microphone signals in compact equipment, while low supply current benefits portable operation. The full-swing output can improve available signal range in low-voltage audio circuitry, and ground-sense inputs suit sources referenced close to ground. Confirm output drive, noise, distortion, gain stability, and maximum input amplitude for the intended microphone and load.

⚡

Low-Voltage Current Sensing

The LMR342F-GE2 can condition low-level current-sense signals when the sensing amplifier must operate from a low supply and place minimal load on the source. Its low input bias current helps avoid disturbing high-impedance sensing elements, and ground-sense operation is useful when the measured signal is close to ground. The dual package can support signal conditioning and an auxiliary channel when the system needs both. Validate input offset, common-mode range, slew behavior, and output accuracy against the current-measurement requirements.

🏭

Industrial Grounded Sensor Front End

The LMR342F-GE2 is suited to grounded industrial sensor interfaces where a compact dual amplifier can condition two related signals. The ground-sense architecture is useful for sensors referenced to the lower rail, while low supply current and low input bias current reduce loading in distributed low-power systems. Use short input routes and careful grounding to control offsets and noise. Validate industrial temperature limits, transient protection, common-mode behavior, and isolation requirements directly from the device documentation.

🔧

Battery-Powered Instrument

The LMR342F-GE2 works in battery-powered instrumentation where a dual amplifier can reduce component count and operating current. Ground-sense inputs and a full-swing output help maximize signal utilization when supply voltage is constrained. The LMR342F series is intended for low operating supply voltage, making the device relevant to portable measurement and monitoring systems. Review input bias behavior over the complete temperature range and include startup, supply noise, and output-swing margin in system verification.

What is the LMR342F-GE2?
The LMR342F-GE2 is a two-circuit, low-supply-current CMOS operational amplifier in an 8-SOP package. According to the ROHM product page, it combines ground-sense inputs, a full-swing output, low operating supply voltage, low supply current, and low input bias current. These features support sensor amplification, battery-powered equipment, battery monitoring, and voice audio preamplification.
What are the key specifications of LMR342F-GE2?
The LMR342F-GE2 provides two amplifier circuits, rail-to-Rail operation, a full-swing output, and a stated supply current of 32 mA. The manufacturer also identifies it as a low-supply-current ground-sense CMOS operational amplifier in an 8-SOP package. Consult the ROHM datasheet for exact supply voltage, gain-bandwidth, offset, bias-current, and temperature limits before setting design margins.
Where can I download the LMR342F-GE2 datasheet PDF?
The LMR342F-GE2 datasheet PDF is available from the ROHM product-page link and from the linked manufacturer-document copy. The document is titled LMR342F Data Sheet and contains the authoritative electrical characteristics, recommended operating conditions, typical performance curves, application information, and pin descriptions. Use the manufacturer document for the exact package drawing and test conditions.
Where can I find the LMR342F-GE2 pinout?
The LMR342F-GE2 pinout is documented in the pin-description and package sections of the ROHM LMR342F datasheet. The device is packaged as an 8-SOP, and each terminal should be assigned from the manufacturer pin table rather than inferred from the generic amplifier symbol. Check the exact suffix data sheet before connecting power, feedback, and input terminals.
Is the LMR342F-GE2 suitable for sensor amplifiers?
The LMR342F-GE2 is suitable for sensor-amplifier designs because ROHM identifies low input bias current, ground-sense inputs, low supply current, and full-swing output as core features. These characteristics are useful with high-impedance or low-current sensors operated from a compact supply. Confirm the sensor leakage requirements, input common-mode range, and signal bandwidth against the datasheet.
Can LMR342F-GE2 be used in battery monitoring circuits?
The LMR342F-GE2 is explicitly identified by ROHM as suitable for battery monitoring and battery-powered electronic equipment. Its low operating supply current and low input bias current help reduce loading and preserve battery energy, while ground-sense input supports measurements referenced to the lower rail. Validate the battery voltage range and amplifier operating limits across all expected conditions.
What is the difference between LMR342F-GE2 and LMR342FV-GE2?
The LMR342F-GE2 is listed in an 8-SOP package, while LMR342FV-GE2 is listed in an 8-SSOP-B package. That package-body difference means LMR342FV-GE2 is not a same-footprint drop-in replacement without confirming mechanical fit and pin compatibility. Both are ROHM LMR342F-series parts, but engineers should compare the package drawings, pin tables, and electrical limits before substitution.
What is the difference between LMR342F-GE2 and LMR342FJ-GE2?
The LMR342FJ-GE2 is a related LMR342F-series ordering code, but the available excerpt does not establish that it uses the exact same 8-SOP footprint and pin arrangement as LMR342F-GE2. The excerpt for LMR342FJ-GE2 cites a 2 MHz gain-bandwidth product, 1 V/us slew rate, 1 pA input bias current, and 250 uV input offset voltage. Verify the package and complete electrical tables in the manufacturer data before treating it as a drop-in part.
When should I choose LMR342F-GE2 over another dual CMOS op amp?
Choose the LMR342F-GE2 when a compact design needs two ground-sense amplifier channels, a full-swing output, and low-power operation in an 8-SOP package. ROHM specifically positions the series for sensors, battery monitoring, portable equipment, and voice audio preamplifiers. Select another amplifier instead when its input common-mode range, bandwidth, offset, noise, or qualification ratings better satisfy the application.
Is the LMR342F-GE2 suitable for voice audio preamplifiers?
The LMR342F-GE2 is suitable for voice audio preamplification according to the ROHM product page. Its dual-circuit configuration supports two low-power signal paths, while low supply current and full-swing output are useful in portable audio equipment. The actual signal bandwidth, output-load capability, distortion, and noise must be checked in the datasheet for the selected gain and supply conditions.
What can replace the LMR342F-GE2?
The LMR342F-GE2 should be replaced only with a part that has the exact same package footprint, pin arrangement, supply limits, input/output ranges, and acceptable electrical performance. The available cross-reference information identifies related LMR342F ordering codes but does not establish enough same-footprint cross-brand substitutes. Use the Request a Quote form on this page for the exact MPN, then review the manufacturer pin table and lifecycle status before releasing a substitution.
What is the best ROHM equivalent for LMR342F-GE2?
The closest ROHM family candidates are LMR342FV-GE2 and LMR342FJ-GE2, but neither can be called a guaranteed drop-in equivalent from the information shown here. LMR342FV-GE2 is identified with an 8-SSOP-B package, while the target is an 8-SOP. Compare exact land patterns, pin numbering, dimensions, and electrical limits for each suffix in the ROHM data sheets before selecting a replacement.
Where can I buy the LMR342F-GE2 online?
Use the Request a Quote form on this page to request the LMR342F-GE2, current price, stock status, and lead time. The exact MPN is also shown by authorized distribution listings, but availability can change by region, quantity, and package suffix. Provide the target quantity and required shipping destination with the request for the most useful quotation response.
What is the price of the LMR342F-GE2?
The current commercial price is not published as a fixed quantity-break table on this product page, so buyers should use the Request a Quote form to obtain a current quotation for LMR342F-GE2. Quote requests can account for quantity, stock, and delivery requirements. Do not rely on a historical or starting-price figure when preparing a production purchasing release.
What is the lead time and stock status for LMR342F-GE2?
Current stock and lead time for LMR342F-GE2 should be confirmed through the Request a Quote form on this page. The available product information does not state a fixed lead-time interval or guarantee a local stock quantity. Include your required quantity, date code preference, and destination so the supplier can provide a usable delivery commitment.
How should LMR342F-GE2 be used in a low-voltage PCB design?
Place the LMR342F-GE2 near the sensor or source, connect the supply bypass capacitor at the device, and keep the ground-sense input path short and clean. Follow the datasheet's recommended operating range, decoupling values, and stability guidance. The low-power dual configuration reduces board area, but each channel still requires correct feedback, output-load, and common-mode analysis.

داده‌های مرجع مهندسی برای LMR342F-GE2 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LMR342F-GE2 when a dual, low-power CMOS amplifier must provide ground-sense inputs and a full-swing output in an 8-SOP package. It is especially relevant to battery monitoring, high-impedance sensor conditioning, portable equipment, and voice audio preamplification. Consider LMR342FJ-GE2 only after confirming its exact package, pinout, bandwidth, slew rate, offset, and operating limits against the target application. Review LMR342FV-GE2 cautiously because it is associated with an 8-SSOP-B package listing and may not fit the target land pattern. For any alternative, verify supply range, common-mode range, output swing, stability with the selected load, temperature grade, and production lifecycle. The LMR342F-GE2 is the appropriate choice when its ground-sense architecture and dual-channel integration match the system requirement, rather than when only a generic low-power op-amp function is needed.

مقایسه با جایگزین‌ها

پارامتر این محصول LMR342FJ-GE2 LMR342FV-GE2
Package 8-SOP 8-SOP 8-SOP-B listing; package drawing requires confirmation
Brand ROHM Semiconductor ROHM Semiconductor ROHM Semiconductor

تفاوت‌های کلیدی

  • Ground-sense input architecture (در مقابلLMR342FJ-GE2)
  • Full-swing output for low-voltage signal range (در مقابلLMR342FV-GE2)
  • Two-channel integration (در مقابلLMR342FJ-GE2)

یادداشت‌های طراحی

Place the LMR342F-GE2 close to the sensor source and keep the ground-sense input trace short, clean, and isolated from switching-current paths. Use a local supply bypass capacitor at the device and follow the recommended capacitance and placement from the manufacturer datasheet. Because input bias and offset are important in high-impedance sensing applications, inspect the PCB for contamination, moisture exposure, and leakage paths before applying the final gain.

Verify the complete signal path against the datasheet's input common-mode range, output swing, gain-bandwidth product, slew rate, and stability recommendations. The ground-sense feature helps with signals near the lower rail but does not remove all common-mode restrictions. Include output-load and capacitive-load checks, especially when driving long PCB traces or ADC input networks, and verify settling before sampling slow sensor events.

Do not substitute the LMR342FJ-GE2 or LMR342FV-GE2 solely because their names are similar. The J and V suffixes identify related orderable versions whose package drawings and pin assignments must be checked against the LMR342F-GE2 8-SOP footprint. Also avoid applying the excerpted 2 MHz bandwidth, 1 V/us slew rate, 1 pA bias current, and 250 uV offset values to the target without checking the exact suffix data sheet.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The product excerpts do not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LMR342F-GE2 datasheet LMR342F-GE2 pinout LMR342F-GE2 datasheet pdf LMR342F-GE2 equivalent LMR342F-GE2 replacement LMR342F-GE2 cross reference LMR342F-GE2 vs LMR342FJ-GE2 LMR342F-GE2 vs LMR342FV-GE2 LMR342F-GE2 8-SOP pinout ROHM LMR342F-GE2 LMR342F-GE2 price LMR342F-GE2 stock LMR342F-GE2 sensor amplifier LMR342F-GE2 battery monitoring LMR342F-GE2 ground sense amplifier

قطعات و اصطلاحات مرتبط

ROHM Semiconductor LMR342F-GE2 LMR342FJ-GE2 LMR342FV-GE2 LMR342F CMOS operational amplifier operational amplifier analog integrated circuit semiconductor ground-sense input full-swing output rail-to-Rail amplifier low input bias current low supply current 8-SOP SOP package surface-mount package sensor amplifier battery monitoring battery-powered equipment voice audio preamplifier low-voltage circuit signal conditioning gain-bandwidth product slew rate
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ