LPC2136FBD64 - 60MHz ARM7 MCU, 256KB Flash | NXP
MPN: LPC2136FBD64 ✓ فعالLPC2136FBD64 نمای کلی
An ARM7 microcontroller is a 32-bit reduced-instruction-set controller with a compact architecture designed for embedded systems. Within the product hierarchy, the LPC2136 belongs to the NXP LPC2100 family of 16/32-bit microcontrollers, combining an ARM7TDMI-S processor core with flash, SRAM, timers, serial interfaces, and analog peripherals. Its 128-bit memory interface and accelerator architecture support efficient 32-bit code execution at the maximum clock rate.
Principal device features include 256 KB of ISP and IAP flash, 32 KB of SRAM, two 10-bit ADC channels, and a DAC. The LPC2136/01 family also provides two I2C interfaces, two UARTs, PWM and capture capabilities, a vectored interrupt controller, and an ARM7TDMI-S core with real-time emulation and embedded trace support. These resources support firmware-driven acquisition, communication, timing, and actuator control without requiring separate peripheral devices.
The 64-LQFP package provides a conventional 0.5 mm lead pitch that is compatible with standard surface-mount assembly and prototype-board layouts. Its 3.3 V supply requirement is suited to embedded industrial, automotive, and consumer equipment where logic-level supply rails are standard. Operation over a -40°C to +85°C temperature range supports designs operating across industrial temperature conditions.
Typical applications include industrial automation controllers, motor and motion-control equipment, data acquisition systems, serial gateways, embedded test instruments, and automotive electronic modules. The combination of two ADC channels, serial peripherals, timers, and 256 KB of flash allows one device to coordinate sensing, control loops, and external communication.
Designers should confirm the exact clock, temperature, and ordering options assigned to the selected suffix before release. The 3.3 V rail must remain within the specified operating limits, and mixed-signal layouts should separate analog inputs from fast digital and serial signals. Decoupling, grounding, and unused-pin handling should follow the pin-connection guidance in the manufacturer datasheet.
This page consolidates manufacturer specifications, package details, ordering variants, application guidance, and replacement considerations into a single engineering reference. It also highlights where an ordering suffix changes procurement requirements without changing the core ARM7 architecture, 256 KB flash configuration, or 64-LQFP footprint.
جایگزینهای drop-in برای LPC2136FBD64 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای LPC2136FBD64 (همان فرمفاکتور و فوتپرینت) — متفاوت در CPU Core, Operating Temperature, Package, SRAM, Supply Voltage.
LPC2136FBD64/01EL
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LPC2136FBD64/01,15
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LPC2136FBD64,151
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LPC2136FBD64/01
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LPC2136FBD64/00
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LPC2136FBD64 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Single-chip 16/32-bit ARM microcontroller |
| CPU Core | ARM7TDMI-S with Thumb extensions |
| Instruction Set | 32-bit RISC with 16-bit Thumb support |
| حداکثر فرکانس کلاک | 60 MHz |
| Embedded Flash Memory | 256 KB, ISP/IAP capable |
| SRAM | 32 KB |
| Memory Interface | 128-bit wide |
| ADC | Two 10-bit ADC channels |
| DAC | 10-bit DAC |
| Serial Interfaces | Two I2C interfaces and two UARTs |
| Interrupt Controller | Vectored Interrupt Controller |
| Debug and Trace Support | Real-time emulation and embedded trace |
| ولتاژ تغذیه | 3.3 V +/- 0.3 V |
| دمای کاری | -40°C to +85°C |
| بستهبندی | 64-lead LQFP, 10 mm x 10 mm |
| Lead Pitch | 0.5 mm |
| نوع نصب | Surface mount |
راهنمای پیکربندی پین LPC2136FBD64 64-lead lqfp, 10 mm x 10 mm
پیکربندی پین برای LPC2136FBD64 (پکیج 64-lead lqfp, 10 mm x 10 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای LPC2136FBD64.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
LPC2136FBD64 مناسب است برای 6 کاربردs: Industrial Automation Controller, Data Acquisition and Sensor Hub, Motor and Motion Control, Automotive Electronic Module, Serial Gateway and Protocol Converter, Embedded Test and Measurement Instrument.
Industrial Automation Controller
The LPC2136FBD64 fits compact automation controllers because its 60 MHz ARM7TDMI-S core can execute real-time sequencing logic while two 10-bit ADC channels monitor process inputs. Two UARTs and two I2C interfaces connect local sensors, actuators, and remote modules without occupying the CPU with bit-level protocol handling. The 256 KB of ISP/IAP flash provides room for application firmware, diagnostics, and parameter tables, while 32 KB of SRAM supports control-state buffering. For industrial equipment, use the -40°C to +85°C operating range as a starting point and validate the complete assembly for vibration, surge, and EMC requirements.
پیشنهادی
Data Acquisition and Sensor Hub
The LPC2136FBD64 can function as a data-acquisition hub when multiple analog inputs must be digitized and forwarded to a host or controller. Its two 10-bit ADC channels suit sensors with moderate resolution requirements, and the 60 MHz core provides ample headroom for calibration, filtering, and packet assembly. The dual UART interfaces allow simultaneous host communication and external equipment control, while the two I2C ports connect addressable sensors and digital converters. Firmware can be updated through ISP or IAP, which is useful for field calibration and product revisions after deployment.
پیشنهادی
Motor and Motion Control
The LPC2136FBD64 supports motor and motion-control subsystems that combine fast control computation with analog feedback. At 60 MHz, the ARM7TDMI-S core can execute current-loop or position-loop algorithms while timer capture and PWM resources generate timing references and drive signals. The two ADC channels can monitor current or position feedback, and the DAC can provide an analog command where required. UART and I2C connectivity allows supervisory commands and configuration updates from a higher-level controller. Validate loop timing and scaling on the final board because peripheral pin multiplexing can affect which timer outputs are available.
پیشنهادی
Automotive Electronic Module
The LPC2136FBD64 is applicable to electronic modules that combine control logic, serial communication, and limited analog monitoring. Its 60 MHz ARM7 core supports protocol handling and deterministic control, while two UARTs and two I2C ports accommodate body-network or module-to-module communication. Two 10-bit ADC channels can monitor simple analog sensors, and the 256 KB flash accommodates application code and diagnostic data. For automotive deployment, qualify the exact suffix for its temperature and quality requirements, add transient protection for external lines, and complete electromagnetic-compatibility validation on the production layout.
پیشنهادی
Serial Gateway and Protocol Converter
The LPC2136FBD64 can bridge legacy serial equipment to a modern embedded network. Two UARTs support one local host port and one legacy-device port, while two I2C interfaces can connect sensors or configuration EEPROMs. The 60 MHz processor allows simultaneous framing, checksum handling, and protocol translation rather than relying on a slow character-based approach. Its 256 KB of ISP/IAP flash accommodates multiple protocol stacks and remote firmware update logic. For a production gateway, isolate long external cables with appropriate protection and define timeout behavior so a failed peripheral cannot stall the forwarding path.
پیشنهادی
Embedded Test and Measurement Instrument
The LPC2136FBD64 can serve as the control processor in a compact test or measurement instrument where deterministic execution, data capture, and host connectivity are required. The 60 MHz ARM7TDMI-S core can run instrument control routines, while two 10-bit ADC channels handle basic analog measurements and the DAC generates test signals. UART ports provide simple computer or laboratory-interface connectivity, and the 256 KB of flash holds firmware, test sequences, and correction tables. Add precision external converters when the required accuracy exceeds 10 bits, and separate analog, digital, and switching-supply sections to minimize measurement noise.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LPC2136FBD64 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | LPC2136FBD64/01EL | LPC2136FBD64/01,15 | LPC2136FBD64,151 | LPC2136FBD64/01 | LPC2136FBD64/00 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) - same | 64-LQFP (10 mm x 10 mm) - same | 64-LQFP (10 mm x 10 mm) - same | 64-LQFP (10 mm x 10 mm) - same | 64-LQFP (10 mm x 10 mm) - same |
| CPU Core | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S |
| Maximum Clock Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Analog Conversion | Two 10-bit ADC channels and 10-bit DAC | Two 10-bit ADC channels and 10-bit DAC | Two 10-bit ADC channels and 10-bit DAC | Two 10-bit ADC channels and 10-bit DAC | Two 10-bit ADC channels and 10-bit DAC | Two 10-bit ADC channels and 10-bit DAC |
| Serial Interfaces | Two UARTs and two I2C interfaces | Two UARTs and two I2C interfaces | Two UARTs and two I2C interfaces | Two UARTs and two I2C interfaces | Two UARTs and two I2C interfaces | Two UARTs and two I2C interfaces |
تفاوتهای کلیدی
- Maintains a 60 MHz ARM7TDMI-S design across the listed NXP order codes (در مقابلLPC2136FBD64/00)
- Uses the same 64-LQFP footprint as the listed manufacturer alternatives (در مقابلLPC2136FBD64/01EL)
- Combines control, analog conversion, and communications on one MCU (در مقابلLPC2136FBD64/01,15)
- Supports field programming through embedded flash (در مقابلLPC2136FBD64,151)
یادداشتهای طراحی
Power the device from a regulated 3.3 V rail within the stated 3.3 V +/- 0.3 V tolerance. Place the required bypass capacitors directly across the supply and ground pins, keep their return paths short, and reserve separate decoupling near any external analog or transceiver supply domains. Startup current, peripheral activity, and clock configuration affect total supply demand, so verify the regulator's transient response rather than sizing it from idle current alone.
Assign every package lead from the NXP pin-description table because the LQFP-64 device multiplexes several port signals with debug, timer, serial, and analog functions. Keep the 3.3 V supply and decoupling connections compact, route the crystal or oscillator network close to its assigned pins, and provide a continuous ground reference beneath the device. Confirm unused inputs are tied to a defined level and unused outputs are left unconnected as specified by the datasheet.
For mixed-signal boards, route analog inputs away from clock, PWM, UART, and switching-regulator nets, and use a continuous ground plane beneath the analog section. Place input filtering close to the source or connector and route analog signals over quiet ground rather than across digital return paths. If the 10-bit converters are insufficient for the measurement, use an external precision ADC and retain the LPC2136FBD64 for control and communication rather than oversampling in place of adequate analog front-end design.
Do not substitute an LPC2136 ordering suffix without checking the NXP ordering-information section. The listed variants share the 64-LQFP footprint, 256 KB flash, and ARM7TDMI-S core, but suffix codes may encode clock, temperature, or commercial conditions. Also avoid assuming that a different manufacturer's microcontroller is pin-compatible: an LQFP-64 package alone does not guarantee matching port functions, power pins, debug signals, or peripheral multiplexing.
اطلاعات انطباق
The retrieved manufacturer and distributor listings do not provide a complete compliance declaration for this ordering code. AEC-Q100 is marked not applicable because the product is a general-purpose microcontroller rather than an automotive-qualified ordering variant. Confirm environmental and material compliance using the exact suffix and the latest NXP declarations before release.