NXP Semiconductors

LPC2136FBD64 - 60MHz ARM7 MCU, 256KB Flash | NXP

MPN: LPC2136FBD64 ✓ פעיל
3.3 V +/- 0.3 V Vdss 64-lead LQFP, 10 mm x 10 mm Package 60 MHz Speed 256 KB, ISP/IAP capable Memory
כמות הזמנה מינימלית: 1 |

LPC2136FBD64 סקירה

The NXP Semiconductors LPC2136FBD64 is a single-chip 16/32-bit ARM7TDMI-S microcontroller with a 60 MHz maximum clock, 256 KB of embedded flash memory, and a 64-lead LQFP package measuring 10 mm by 10 mm. It combines a 32-bit RISC core, serial communications, analog conversion, and embedded memory in one device for embedded control systems.

An ARM7 microcontroller is a 32-bit reduced-instruction-set controller with a compact architecture designed for embedded systems. Within the product hierarchy, the LPC2136 belongs to the NXP LPC2100 family of 16/32-bit microcontrollers, combining an ARM7TDMI-S processor core with flash, SRAM, timers, serial interfaces, and analog peripherals. Its 128-bit memory interface and accelerator architecture support efficient 32-bit code execution at the maximum clock rate.

Principal device features include 256 KB of ISP and IAP flash, 32 KB of SRAM, two 10-bit ADC channels, and a DAC. The LPC2136/01 family also provides two I2C interfaces, two UARTs, PWM and capture capabilities, a vectored interrupt controller, and an ARM7TDMI-S core with real-time emulation and embedded trace support. These resources support firmware-driven acquisition, communication, timing, and actuator control without requiring separate peripheral devices.

The 64-LQFP package provides a conventional 0.5 mm lead pitch that is compatible with standard surface-mount assembly and prototype-board layouts. Its 3.3 V supply requirement is suited to embedded industrial, automotive, and consumer equipment where logic-level supply rails are standard. Operation over a -40°C to +85°C temperature range supports designs operating across industrial temperature conditions.

Typical applications include industrial automation controllers, motor and motion-control equipment, data acquisition systems, serial gateways, embedded test instruments, and automotive electronic modules. The combination of two ADC channels, serial peripherals, timers, and 256 KB of flash allows one device to coordinate sensing, control loops, and external communication.

Designers should confirm the exact clock, temperature, and ordering options assigned to the selected suffix before release. The 3.3 V rail must remain within the specified operating limits, and mixed-signal layouts should separate analog inputs from fast digital and serial signals. Decoupling, grounding, and unused-pin handling should follow the pin-connection guidance in the manufacturer datasheet.

This page consolidates manufacturer specifications, package details, ordering variants, application guidance, and replacement considerations into a single engineering reference. It also highlights where an ordering suffix changes procurement requirements without changing the core ARM7 architecture, 256 KB flash configuration, or 64-LQFP footprint.

חלופות תחליף ישיר עבור LPC2136FBD64 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LPC2136FBD64 (אותו גורם צורה וטביעת רגל) — שונים ב CPU Core, Operating Temperature, Package, SRAM, Supply Voltage.

NXP Semiconductors
CPU Core: Arm7TDMI-S 16/32-bit
Operating Temperature: -40 °C to +85 °C for LPC2124FBD64/00,15
Package: 64-pin LQFP, 10 mm x 10 mm
השווה עם LPC2136FBD64 →

LPC2136FBD64/01EL

✅ Drop-In
📦 64-LQFP (10 mm x 10 mm)
Same 60 MHz ARM7 core and 256 KB flash configuration; ordering suffix differs by 0% in flash capacity and clock class

📋 חלופה להתייחסות (לא בקטלוג)

LPC2136FBD64/01,15

✅ Drop-In
📦 64-LQFP (10 mm x 10 mm)
Same 60 MHz ARM7 core and 256 KB flash configuration; commercial ordering code differs while electrical key ratings remain 0% lower

📋 חלופה להתייחסות (לא בקטלוג)

LPC2136FBD64,151

✅ Drop-In
📦 64-LQFP (10 mm x 10 mm)
Same 60 MHz ARM7 core and 256 KB flash configuration; ordering code differs with 0% change to the listed key parameters

📋 חלופה להתייחסות (לא בקטלוג)

LPC2136FBD64/01

✅ Drop-In
📦 64-LQFP (10 mm x 10 mm)
Same LPC2136/01 256 KB flash device and 64-LQFP footprint; suffix-specific clock or temperature options require verification

📋 חלופה להתייחסות (לא בקטלוג)

LPC2136FBD64/00

✅ Drop-In
📦 64-LQFP (10 mm x 10 mm)
Same 256 KB flash and 32 KB SRAM configuration; the /00 versus /01 clock designation is the principal suffix-specific difference to verify

📋 חלופה להתייחסות (לא בקטלוג)

LPC2136FBD64 דירוגים מרביים ומאפיינים חשמליים

Product Type Single-chip 16/32-bit ARM microcontroller
CPU Core ARM7TDMI-S with Thumb extensions
Instruction Set 32-bit RISC with 16-bit Thumb support
תדר שעון מקסימלי 60 MHz
Embedded Flash Memory 256 KB, ISP/IAP capable
SRAM 32 KB
Memory Interface 128-bit wide
ADC Two 10-bit ADC channels
DAC 10-bit DAC
Serial Interfaces Two I2C interfaces and two UARTs
Interrupt Controller Vectored Interrupt Controller
Debug and Trace Support Real-time emulation and embedded trace
מתח אספקה 3.3 V +/- 0.3 V
טמפרטורת פעולה -40°C to +85°C
מארז 64-lead LQFP, 10 mm x 10 mm
Lead Pitch 0.5 mm
סוג הרכבה Surface mount

מדריך תצורת פינים של LPC2136FBD64 64-lead lqfp, 10 mm x 10 mm

תצורת פינים עבור LPC2136FBD64 (מארזת 64-lead lqfp, 10 mm x 10 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 64-lead lqfp, 10 mm x 10 mm עבור LPC2136FBD64

אין נתוני פריסת פינים מפורטים עבור LPC2136FBD64.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LPC2136FBD64 מתאים עבור 6 יישוםs: Industrial Automation Controller, Data Acquisition and Sensor Hub, Motor and Motion Control, Automotive Electronic Module, Serial Gateway and Protocol Converter, Embedded Test and Measurement Instrument.

🏭

Industrial Automation Controller

The LPC2136FBD64 fits compact automation controllers because its 60 MHz ARM7TDMI-S core can execute real-time sequencing logic while two 10-bit ADC channels monitor process inputs. Two UARTs and two I2C interfaces connect local sensors, actuators, and remote modules without occupying the CPU with bit-level protocol handling. The 256 KB of ISP/IAP flash provides room for application firmware, diagnostics, and parameter tables, while 32 KB of SRAM supports control-state buffering. For industrial equipment, use the -40°C to +85°C operating range as a starting point and validate the complete assembly for vibration, surge, and EMC requirements.

🧩

Data Acquisition and Sensor Hub

The LPC2136FBD64 can function as a data-acquisition hub when multiple analog inputs must be digitized and forwarded to a host or controller. Its two 10-bit ADC channels suit sensors with moderate resolution requirements, and the 60 MHz core provides ample headroom for calibration, filtering, and packet assembly. The dual UART interfaces allow simultaneous host communication and external equipment control, while the two I2C ports connect addressable sensors and digital converters. Firmware can be updated through ISP or IAP, which is useful for field calibration and product revisions after deployment.

⚡

Motor and Motion Control

The LPC2136FBD64 supports motor and motion-control subsystems that combine fast control computation with analog feedback. At 60 MHz, the ARM7TDMI-S core can execute current-loop or position-loop algorithms while timer capture and PWM resources generate timing references and drive signals. The two ADC channels can monitor current or position feedback, and the DAC can provide an analog command where required. UART and I2C connectivity allows supervisory commands and configuration updates from a higher-level controller. Validate loop timing and scaling on the final board because peripheral pin multiplexing can affect which timer outputs are available.

🚗

Automotive Electronic Module

The LPC2136FBD64 is applicable to electronic modules that combine control logic, serial communication, and limited analog monitoring. Its 60 MHz ARM7 core supports protocol handling and deterministic control, while two UARTs and two I2C ports accommodate body-network or module-to-module communication. Two 10-bit ADC channels can monitor simple analog sensors, and the 256 KB flash accommodates application code and diagnostic data. For automotive deployment, qualify the exact suffix for its temperature and quality requirements, add transient protection for external lines, and complete electromagnetic-compatibility validation on the production layout.

🌐

Serial Gateway and Protocol Converter

The LPC2136FBD64 can bridge legacy serial equipment to a modern embedded network. Two UARTs support one local host port and one legacy-device port, while two I2C interfaces can connect sensors or configuration EEPROMs. The 60 MHz processor allows simultaneous framing, checksum handling, and protocol translation rather than relying on a slow character-based approach. Its 256 KB of ISP/IAP flash accommodates multiple protocol stacks and remote firmware update logic. For a production gateway, isolate long external cables with appropriate protection and define timeout behavior so a failed peripheral cannot stall the forwarding path.

🖥️

Embedded Test and Measurement Instrument

The LPC2136FBD64 can serve as the control processor in a compact test or measurement instrument where deterministic execution, data capture, and host connectivity are required. The 60 MHz ARM7TDMI-S core can run instrument control routines, while two 10-bit ADC channels handle basic analog measurements and the DAC generates test signals. UART ports provide simple computer or laboratory-interface connectivity, and the 256 KB of flash holds firmware, test sequences, and correction tables. Add precision external converters when the required accuracy exceeds 10 bits, and separate analog, digital, and switching-supply sections to minimize measurement noise.

What is the LPC2136FBD64?
The LPC2136FBD64 is an NXP single-chip ARM7TDMI-S microcontroller rated for up to 60 MHz and equipped with 256 KB of embedded flash memory. It also provides 32 KB of SRAM, two 10-bit ADC channels, a DAC, two I2C interfaces, and two UARTs in a 64-lead LQFP package. According to the NXP LPC2131/32/34/36/38 datasheet, the device is intended for embedded control applications that combine real-time processing, communications, timing, and analog functions in one package.
Where can I download the LPC2136FBD64 datasheet PDF?
The official LPC2136FBD64 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/LPC2131_32_34_36_38.pdf. The document covers the related LPC2131, LPC2132, LPC2134, LPC2136, and LPC2138 devices and includes the CPU architecture, memory map, electrical characteristics, peripherals, package information, and pin descriptions. Use the ordering-information section to confirm the electrical and temperature options associated with a specific LPC2136 suffix.
What are the key specifications of LPC2136FBD64 that engineers should know?
The LPC2136FBD64 combines a 60 MHz ARM7TDMI-S core with 256 KB of ISP/IAP flash, 32 KB of SRAM, and a 10 mm by 10 mm 64-LQFP package. Its 128-bit memory interface supports efficient 32-bit execution, while two 10-bit ADCs, a DAC, two UARTs, and two I2C interfaces cover common embedded acquisition and communication requirements. These resources allow a single controller to perform sensing, control, and communications without several companion chips.
What is the pinout of LPC2136FBD64?
The LPC2136FBD64 uses a 64-lead LQFP package with a 0.5 mm lead pitch. Its pins include the ARM7TDMI-S debug and JTAG interface, power and ground connections, oscillator inputs, reset and boot-control functions, port signals, and multiplexed peripheral functions. Because several pins serve multiple functions, assign the PCB tracks from the pin-description and application tables in the NXP LPC2131/32/34/36/38 datasheet rather than from the port name alone.
How much flash memory and RAM does the LPC2136FBD64 contain?
The LPC2136FBD64 contains 256 KB of embedded high-speed flash and 32 KB of SRAM. Its flash supports In-System Programming and In-Application Programming, allowing firmware to be programmed or updated through the device's serial programming path. The 128-bit-wide memory interface and accelerator architecture support 32-bit code execution at the maximum 60 MHz operating frequency, according to the NXP family datasheet.
What can replace the LPC2136FBD64?
The closest drop-in choices are ordering variants that retain the same NXP LPC2136/01 device, 256 KB flash configuration, 60 MHz class, and 64-LQFP footprint. LPC2136FBD64/01EL, LPC2136FBD64/01,15, LPC2136FBD64,151, LPC2136FBD64/01, and LPC2136FBD64/00 appear in manufacturer or distributor listings for the same device family. Verify the suffix-specific clock, temperature, and order-code requirements before treating any one as an exact replacement.
Is LPC2136FBD64/01EL a drop-in replacement for LPC2136FBD64?
LPC2136FBD64/01EL is the same 64-LQFP LPC2136/01 device configuration with a different ordering suffix, so it can serve as a drop-in alternative when its suffix-specific operating conditions match the original design. Both listings identify a 60 MHz ARM7 LPC2100 microcontroller with 256 KB of flash. The manufacturer ordering table must be checked to confirm the exact temperature range, clock designation, and packaging code associated with each suffix.
LPC2136FBD64 vs LPC2136FBD64/01,15 - which should I choose?
Choose LPC2136FBD64/01,15 when its manufacturer-defined order-code ratings match the product requirements and its procurement packaging is preferred. Choose the base LPC2136FBD64 designation when that ordering code is specified by the original BOM or approved vendor list. Both listings identify the same 60 MHz ARM7 LPC2100 microcontroller with 256 KB of flash in a 64-LQFP package, so the decision depends on suffix-level commercial and qualification details rather than the core architecture.
When should I choose LPC2136FBD64 over a different LPC2136 ordering code?
Choose the LPC2136FBD64 order code when it matches an existing design, qualified BOM entry, or approved PCB assembly specification. Choose another ordering suffix only after checking its clock, temperature, reel or tray format, and supplier-specific code. The shared 256 KB flash, ARM7TDMI-S architecture, and 64-LQFP footprint make the variants mechanically similar, but ordering suffixes can still encode commercial or qualification differences that must be reviewed.
Is LPC2136FBD64 suitable for industrial automation equipment?
Yes, the LPC2136FBD64 is suitable for many industrial automation, data acquisition, and embedded control systems. Its 60 MHz ARM7TDMI-S core handles real-time control logic, while two 10-bit ADC channels, a DAC, two UARTs, and two I2C interfaces support sensing and external communication. The -40°C to +85°C operating range and 3.3 V supply are appropriate for many industrial designs, subject to application-specific EMC and environmental qualification.
How do I design the power supply for LPC2136FBD64?
Design the LPC2136FBD64 around a regulated 3.3 V supply with the tolerance stated in the datasheet, 3.3 V +/- 0.3 V. Place local high-frequency decoupling capacitors close to the device's supply pins and route return currents through a low-impedance ground plane. Follow the datasheet's recommended crystal, reset, and power-on circuit arrangements, and verify startup and operating current against the selected clock and peripheral configuration.
What peripherals are available on the LPC2136FBD64?
The LPC2136FBD64 provides two 10-bit ADC channels, a 10-bit DAC, two I2C serial interfaces, and two UARTs, with one UART supporting a full modem interface according to the device documentation. The ARM7TDMI-S core also provides a vectored interrupt controller for responsive event handling. Additional timer, PWM, capture, and digital I/O capabilities make the device suitable for mixed signal control and communication designs.
Does the LPC2136FBD64 support real-time emulation and embedded trace?
Yes, the LPC2136FBD64 uses an ARM7TDMI-S core with real-time emulation and embedded trace support. These features allow a debugger to observe execution behavior without completely halting the target in the same way as a simple simulation environment. The NXP LPC2131/32/34/36/38 datasheet also describes the device's vectored interrupt structure and memory system, which should be reviewed together when configuring a development toolchain.
Where can I buy LPC2136FBD64 online?
Use the Request a Quote form on this page to request current LPC2136FBD64 pricing, stock, minimum order quantity, and lead time. Because order suffixes such as /01EL, /01,15, and ,151 can represent different commercial order codes, include the complete suffix and required reel or tray format in your request. The manufacturer product page is https://www.nxp.com/part/LPC2136FBD64 for lifecycle and product-family information.
What is the price and lead time for LPC2136FBD64?
Submit the LPC2136FBD64 order through the Request a Quote form on this page to obtain the current price, stock position, minimum order quantity, and lead time. Pricing and availability can change with order suffix, package format, lot status, and order volume, so confirm the complete manufacturer part number and reel or tray requirement with each quotation. The same request should state whether scheduled production deliveries or prototype quantities are required.
What is the best NXP equivalent for LPC2136FBD64?
The best NXP equivalent is normally the ordering code that exactly matches the approved BOM entry, since LPC2136 variants share the same core and footprint but may differ in suffix-specific ratings or commercial terms. Listed alternatives include LPC2136FBD64/01EL, LPC2136FBD64/01,15, LPC2136FBD64,151, LPC2136FBD64/01, and LPC2136FBD64/00. Use the NXP ordering information and datasheet to confirm that the selected code satisfies the original clock, temperature, and assembly requirements.

נתוני עזר הנדסיים עבור LPC2136FBD64 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose LPC2136FBD64 when it is the exact ordering code on an approved BOM and your design already targets the NXP LPC2136 ARM7 architecture, 256 KB flash configuration, and 64-LQFP footprint. Choose LPC2136FBD64/01EL or LPC2136FBD64/01,15 when the manufacturer ordering information confirms a better fit for procurement, temperature, clock, or packaging requirements while preserving the same electrical and mechanical configuration. Use LPC2136FBD64/01 or LPC2136FBD64/00 when those specific ordering codes match the supported product variant. These options preserve the ARM7TDMI-S core, 32 KB of SRAM, two 10-bit ADC channels, a DAC, and the listed serial interfaces, but suffix details must still be checked. Do not treat a different manufacturer's LQFP-64 microcontroller as a drop-in replacement solely because its package matches; verify every power, ground, debug, clock, analog, and multiplexed peripheral connection.

השוואה עם חלופות

פרמטר מוצר זה LPC2136FBD64/01EL LPC2136FBD64/01,15 LPC2136FBD64,151 LPC2136FBD64/01 LPC2136FBD64/00
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) - same 64-LQFP (10 mm x 10 mm) - same 64-LQFP (10 mm x 10 mm) - same 64-LQFP (10 mm x 10 mm) - same 64-LQFP (10 mm x 10 mm) - same
CPU Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
Maximum Clock Frequency 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz
Flash Memory 256 KB 256 KB 256 KB 256 KB 256 KB 256 KB
SRAM 32 KB 32 KB 32 KB 32 KB 32 KB 32 KB
Analog Conversion Two 10-bit ADC channels and 10-bit DAC Two 10-bit ADC channels and 10-bit DAC Two 10-bit ADC channels and 10-bit DAC Two 10-bit ADC channels and 10-bit DAC Two 10-bit ADC channels and 10-bit DAC Two 10-bit ADC channels and 10-bit DAC
Serial Interfaces Two UARTs and two I2C interfaces Two UARTs and two I2C interfaces Two UARTs and two I2C interfaces Two UARTs and two I2C interfaces Two UARTs and two I2C interfaces Two UARTs and two I2C interfaces

מבדילים עיקריים

  • Maintains a 60 MHz ARM7TDMI-S design across the listed NXP order codes (לעומתLPC2136FBD64/00)
  • Uses the same 64-LQFP footprint as the listed manufacturer alternatives (לעומתLPC2136FBD64/01EL)
  • Combines control, analog conversion, and communications on one MCU (לעומתLPC2136FBD64/01,15)
  • Supports field programming through embedded flash (לעומתLPC2136FBD64,151)

הערות תכנון

Power the device from a regulated 3.3 V rail within the stated 3.3 V +/- 0.3 V tolerance. Place the required bypass capacitors directly across the supply and ground pins, keep their return paths short, and reserve separate decoupling near any external analog or transceiver supply domains. Startup current, peripheral activity, and clock configuration affect total supply demand, so verify the regulator's transient response rather than sizing it from idle current alone.

Assign every package lead from the NXP pin-description table because the LQFP-64 device multiplexes several port signals with debug, timer, serial, and analog functions. Keep the 3.3 V supply and decoupling connections compact, route the crystal or oscillator network close to its assigned pins, and provide a continuous ground reference beneath the device. Confirm unused inputs are tied to a defined level and unused outputs are left unconnected as specified by the datasheet.

For mixed-signal boards, route analog inputs away from clock, PWM, UART, and switching-regulator nets, and use a continuous ground plane beneath the analog section. Place input filtering close to the source or connector and route analog signals over quiet ground rather than across digital return paths. If the 10-bit converters are insufficient for the measurement, use an external precision ADC and retain the LPC2136FBD64 for control and communication rather than oversampling in place of adequate analog front-end design.

Do not substitute an LPC2136 ordering suffix without checking the NXP ordering-information section. The listed variants share the 64-LQFP footprint, 256 KB flash, and ARM7TDMI-S core, but suffix codes may encode clock, temperature, or commercial conditions. Also avoid assuming that a different manufacturer's microcontroller is pin-compatible: an LQFP-64 package alone does not guarantee matching port functions, power pins, debug signals, or peripheral multiplexing.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The retrieved manufacturer and distributor listings do not provide a complete compliance declaration for this ordering code. AEC-Q100 is marked not applicable because the product is a general-purpose microcontroller rather than an automotive-qualified ordering variant. Confirm environmental and material compliance using the exact suffix and the latest NXP declarations before release.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

lpc2136fbd64 datasheet nxp lpc2136fbd64 LPC2136FBD64 datasheet pdf LPC2136FBD64 pinout LPC2136FBD64 LQFP64 LPC2136FBD64 60MHz 256KB flash LPC2136FBD64 drop-in replacement LPC2136FBD64 vs LPC2136FBD64/01EL LPC2136FBD64 equivalent LPC2136FBD64 price LPC2136FBD64 stock LPC2136FBD64 ADC DAC LPC2136FBD64 ARM7TDMI-S LPC2136 application circuit LPC2136FBD64 schematic

רכיבים ומונחים קשורים

NXP Semiconductors LPC2136FBD64 LPC2136FBD64/01EL LPC2136FBD64/01,15 LPC2136FBD64,151 LPC2136FBD64/01 LPC2136FBD64/00 ARM7TDMI-S ARM7 Thumb instruction set 32-bit RISC 16/32-bit microcontroller embedded microcontroller semiconductor LPC2100 series 256 KB embedded flash 32 KB SRAM In-System Programming In-Application Programming 10-bit ADC 10-bit DAC UART I2C Vectored Interrupt Controller LQFP-64 embedded control industrial automation data acquisition serial communication
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר