LT1013IS8 - Dual Precision Op Amp, 44V, SOIC-8 | Analog Devices
MPN: LT1013IS8 ✓ فعالLT1013IS8 نمای کلی
An operational amplifier is an active analog signal-conditioning component that amplifies the difference between its inverting and non-inverting inputs. Within the broader hierarchy, the LT1013 belongs to the precision operational amplifier class, then to the voltage-feedback amplifier family, and ultimately to the wider integrated-circuit and signal-chain product categories. Its dual architecture provides two independent amplifiers in one package, making it suitable for instrumentation, filtering, threshold detection, and current-loop interface circuits.
Key characteristics include a 44 V maximum supply voltage, very high open-loop gain, low supply current, and low-noise performance. The 500 uA maximum supply current is especially useful in battery-powered instruments where amplifier power consumption directly affects the available operating interval. The 1.5 million minimum gain at 5 mA supports high-resolution feedback networks, while the 0.07 pA/√Hz current-noise figure is valuable when the input source is a high-impedance transducer rather than a low-resistance voltage source.
The LT1013 operates with both single 5 V and dual ±15 V supplies, allowing the same device to serve portable measurement systems and higher-voltage industrial instrumentation. Its precision characteristics make it appropriate for strain-gauge amplifiers, thermocouple amplifiers, instrumentation-amplifier input stages, and 4 mA-to-20 mA current-loop transmitters. Because the device is not rail-to-rail, output-swing and common-mode headroom must be checked against the selected supply voltage and load.
For reliable layouts, place the feedback resistors close to their associated pins and route input and output traces away from switching nodes and high-current paths. Bypass the supply pins with short ceramic connections, and verify offset, bias current, noise, and settling requirements at the actual signal bandwidth before fixing the gain network.
This page combines device specifications, sourcing information, drop-in ordering-code references, application guidance, and practical design notes. It also provides a parameter-by-parameter comparison to help engineers assess package, supply range, noise, gain, and supply-current differences before making a board-level substitution.
جایگزینهای drop-in برای LT1013IS8 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای LT1013IS8 (همان فرمفاکتور و فوتپرینت) — متفاوت در RoHS Status, Supply Voltage Range.
LT1013IS8#PBF
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LT1013IS8#TR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LT1013CN8
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LT1013DN8
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LT1013DS8
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LT1013IS8 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Amplifier Type | Dual precision operational amplifier |
| Number of Circuits | 2 |
| Supply Voltage Range | 5 V to 44 V |
| Single-Supply Operation | 5 V |
| Dual-Supply Operation | ±15 V |
| Maximum Supply Current | 500 uA |
| Open-Loop Gain at 5 mA Load | 1.5 million minimum |
| Open-Loop Gain at 17 mA Load | 800,000 minimum |
| Low-Frequency Noise Density | 0.55 uV peak-to-peak (0.1 Hz to 10 Hz) |
| Current Noise Density | 0.07 pA/√Hz |
| محدوده دمای کاری | -40 °C to +85 °C |
| Package Type | 8-pin SOIC, 8-SO |
| Package Dimensions | 0.154 in (3.90 mm) width |
| نوع نصب | Surface mount |
| وضعیت RoHS | Compliant |
| Lead-Free Status | Yes |
پیکربندی پین LT1013IS8
| پین 1 | OUT A — Amplifier A output |
| پین 2 | -IN A — Amplifier A inverting input |
| پین 3 | +IN A — Amplifier A non-inverting input |
| پین 4 | V- — Negative supply or ground connection |
| پین 5 | +IN B — Amplifier B non-inverting input |
| پین 6 | -IN B — Amplifier B inverting input |
| پین 7 | OUT B — Amplifier B output |
| پین 8 | V+ — Positive supply connection |
کاربردهای معمول
LT1013IS8 مناسب است برای 6 کاربردs: Strain-Gauge Bridge Signal Conditioning, Thermocouple and Low-Level Sensor Amplification, 4 mA to 20 mA Current-Loop Transmitter, Battery-Powered Precision Instrumentation, Precision Active Filtering, Threshold Detection and Limit Monitoring.
Strain-Gauge Bridge Signal Conditioning
The LT1013IS8 fits precision bridge-amplifier inputs because its guaranteed open-loop gain reaches 1.5 million at a 5 mA load and its current noise is 0.07 pA/√Hz. Place one amplifier in the instrumentation configuration and use the second channel for gain or filtering. The high gain reduces error caused by amplifier offset relative to the small bridge excitation signal. Because the amplifier is not rail-to-rail, confirm common-mode and output-swing limits at the bridge excitation voltage before layout release.
پیشنهادی
Thermocouple and Low-Level Sensor Amplification
For thermocouple and resistance-sensor front ends, the LT1013IS8 provides the high gain and low noise needed to preserve small differential signals. A 5 mA-load open-loop gain of 1.5 million and 0.55 uV peak-to-peak noise over 0.1 Hz to 10 Hz help limit errors in the microvolt-to-millivolt range. The 500 uA maximum supply current is advantageous in battery-powered field instruments. Place input traces away from heaters, switching regulators, and relay contacts to reduce thermoelectric offset errors.
پیشنهادی
4 mA to 20 mA Current-Loop Transmitter
The LT1013IS8 supports the amplifier and buffer stages used in 4 mA-to-20 mA current-loop transmitters. Its high open-loop gain supports accurate closed-loop current control, while the 500 uA maximum supply current reduces the amplifier's contribution to overall transmitter power. The two channels can implement a buffer plus an active filter or error amplifier. Confirm the common-mode range, output-swing capability, and loop bandwidth in the final transmitter topology before production.
پیشنهادی
Battery-Powered Precision Instrumentation
The LT1013IS8 is appropriate for portable measurement systems where amplifier current draw competes with sensor and display power budgets. Its guaranteed 500 uA maximum supply current and operation from a 5 V single supply help conserve energy, while the 1.5 million minimum gain at a 5 mA load maintains accuracy in non-inverting and differential stages. Use low-leakage resistors and protective diodes around high-impedance inputs, and verify shutdown behavior if the instrument also uses the second amplifier channel for monitoring.
پیشنهادی
Precision Active Filtering
The LT1013IS8 can implement precision active filters and multiple gain blocks where component tolerances must not dominate the transfer function. A guaranteed open-loop gain of 1.5 million improves closed-loop accuracy at low frequencies, and the dual package allows two filter sections or a gain block plus buffer. Keep resistor networks close to the amplifier pins and keep the feedback loop compact. Set the noise target against the filter's noise-gain bandwidth rather than using only the signal bandwidth.
پیشنهادی
Threshold Detection and Limit Monitoring
The LT1013IS8 supports precision threshold-detection and multiple-limit monitoring circuits where comparator-like functionality requires adjustable gain and signal amplification. The high open-loop gain improves switching repeatability around the reference threshold, and the two channels permit independent detection functions. Use hysteresis where noise could cause repeated output transitions. The 0.55 uV peak-to-peak low-frequency noise specification helps set the minimum detectable signal, while the supply limits must be reviewed for input signals above the common-mode range.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LT1013IS8 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | LT1013IS8#PBF | LT1013IS8#TR | LT1013CN8 | LT1013DN8 | LT1013DS8 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Amplifier Configuration | Dual precision operational amplifier | Dual precision operational amplifier | Dual precision operational amplifier | Dual precision operational amplifier | Dual precision operational amplifier | Dual precision operational amplifier |
تفاوتهای کلیدی
- High guaranteed open-loop gain supports accurate precision feedback stages (در مقابلLM324NSR)
- Low supply current supports battery-powered instrumentation (در مقابلLM324NSR)
- Low-frequency noise performance improves microvolt-level conditioning (در مقابلLM324NSR)
یادداشتهای طراحی
Keep the precision feedback network compact and connect each resistor directly to the relevant input or output pin. High-impedance input traces should be short, guarded where practical, and routed away from relay contacts, switching inductors, and power-supply traces. In strain-gauge and thermocouple circuits, even a few millivolts of thermoelectric or leakage-induced error can be significant relative to the sensor signal.
Use the lowest supply voltage that still satisfies the input common-mode, output-swing, and transient requirements. The LT1013IS8 is specified at 500 uA maximum supply current, but total system current also includes resistor dividers, protection devices, and the second amplifier channel. Decouple the supply pins with short ceramic-capacitor connections and verify startup behavior if the input sources can remain energized while the supply is rising.
Do not treat the 1.5 million open-loop gain figure as the closed-loop gain of the assembled circuit. Resistor tolerances, bias-current effects, and noise gain determine the practical accuracy of the gain stage. Check the input bias current, input offset voltage, and temperature drift in the manufacturer data sheet before selecting the feedback resistors, particularly for high-impedance sensor applications.
اطلاعات انطباق
The manufacturer product page and device records identify the LT1013 family as RoHS compliant with a lead-free ordering option. No specific REACH, halogen-free, conflict-minerals, or automotive-qualification statement is published in the cited product information.